Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “graphitization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Design and performance characterisation of the HAPG von Hámos Spectrometer at the High Energy Density Instrument of the European XFEL

The von Hámos spectrometer setup at the HED instrument of the European XFEL is described in detail. The spectrometer is designed to be operated primarily between 5 and 15 keV to complement the operating photon energy range of the HED instrument. Four Highly Annealed Pyrolitic Graphite (HAPG) crystals are characterised with thicknesses of 40 μm or 100 μm and radius-of-curvature 50 mm or 80 mm, in conjunction with either an ePix100 or Jungfrau detector. The achieved resolution with the 50 mm crystals, operated between 6.5 and 9 keV, matches that reported previously: ~8 eV for a thickness of 40 μm, whereas, with an 80 mm crystal of thickness 40 μm, the resolution exceeds that expected. Namely, a resolution of 2 eV is demonstrated between 5–6 keV implying a resolving power of 2800. Therefore, we posit that flatter HAPG crystals, with their high reflectivity and improved resolving power, are a powerful tool for hard x-ray scattering and emission experiments allowing unprecedented measurements of collective scattering in a single shot.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Emissivity measurements of CuCrZr alloy

The Facility for Rare Isotope Beams (FRIB) heavy-ion accelerator, in user operation since 2022, produces rare isotope beams via interactions of high-intensity stable ion beams with a graphite production target. Approximately 20–40% of the primary beam power is deposited in the target, while the remaining 60–80% is absorbed by the beam dump. The minichannel beam dump (MCBD), currently operated at 20 kW and designed for operation up to 50 kW, uses CuCrZr alloy absorber plates. Thermal validation and thermal cycling tests of the MCBD were conducted at the Applied Research Laboratory (ARL) at Pennsylvania State University. Temperature measurements were obtained from an infrared (IR) camera. Since accurate temperature determination requires reliable emissivity values, the emissivity of CuCrZr was measured using the IR camera validated against thermocouple reference temperatures up to approximately 650 °C. The measurements were conducted under a vacuum level of approximately 10 -5 torr to minimize emissivity variations due to surface oxidation. The emissivity of CuCrZr was determined to be 0.057 ± 0.009 using a constant fit to the measured data over the surface temperature range from 100–650 °C.

Accelerator Subsystems and Technologies↗
DOE OSTI2022

Observation of well-defined Kohn-anomaly in high-quality graphene devices at room temperature

Abstract Due to its ultra-thin nature, the study of graphene quantum optoelectronics, like gate-dependent graphene Raman properties, is obscured by interactions with substrates and surroundings. For instance, the use of doped silicon with a capping thermal oxide layer limited the observation to low temperatures of a well-defined Kohn-anomaly behavior, related to the breakdown of the adiabatic Born–Oppenheimer approximation. Here, we design an optoelectronic device consisting of single-layer graphene electrically contacted with thin graphite leads, seated on an atomically flat hexagonal boron nitride substrate and gated with an ultra-thin gold layer. We show that this device is optically transparent, has no background optical peaks and photoluminescence from the device components, and no generation of laser-induced electrostatic doping (photodoping). This allows for room-temperature gate-dependent Raman spectroscopy effects that have only been observed at cryogenic temperatures so far, above all the Kohn-anomaly phonon energy normalization. The new device architecture, by decoupling graphene optoelectronic properties from the substrate effects, allows for observing quantum phenomena at room temperature.

Materials Science↗
DOE OSTI2022

Nanoscale insights into the structure of solution-processed graphene by x-ray scattering

Abstract Chemical exfoliation is an attractive approach for the synthesis of graphene due to its low cost and simplicity. However, challenges still remain in the characterization of solution-processed graphene, in particular with atomic resolution. Through this work we demonstrate the x-ray pair distribution function as a novel approach to study solution-processed graphene or other 2D materials with atomic resolution, directly in solution, produced by liquid-phase and electrochemical exfoliations. The results show the disappearance of long-range atomic correlations, in both cases, confirming the production of single and few-layer graphene. In addition, a considerable ring distortion has been observed as compared to graphite, irrespective of the solvent used: the normal surface angle to the sheet of the powder sample should be less than 6°, compatible with ripples formation observed in suspended graphene. We attribute this effect to the interaction of solvent molecules with the graphene nanosheets.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Edge states of α-bismuthene nanostructures

We present a systematic investigation of the edge states (ESs) of two-dimensional α-bismuthene (α-Bi) structures self-assembled on highly oriented pyrolytic graphite substrates, using scanning tunnelling microscopy and scanning tunnelling spectroscopy. The measurements are carried out for 3ML, 5ML and 7ML thick Bi structures. Our spectroscopy studies reveal clear features at the edges of the 5ML and 7ML thick structures, and the positions of the ESs coincide with the topographical step edges. In contrast, in 3ML structures the ESs appear to be absent and instead new states are sometimes observed, far from the topographical edge. These states are associated with a moiré pattern and result from strain-induced modulation of the topology. Our observations demonstrate the impact on the ESs of coupling to adjacent structures.

2D materials↗
DOE OSTI2025

Few-mode and anisotropic quantum transport in InSb nanoribbons using an all-van der Waals material-based gate

High-quality electrostatic gating is a fundamental ingredient for successful semiconducting device physics, and a key element of realizing clean quantum transport. Inspired by the widespread improvement of transport quality when two-dimensional van der Waals (vdW) materials are gated exclusively by other vdW materials, we have developed a method for gating non-vdW materials with an all-vdW gate stack, consisting of a hexagonal boron nitride dielectric layer and a few-layer graphite gate electrode. We demonstrate this gating approach on MOVPE-grown InSb nanoribbons (NRs), a novel variant of the InSb nanowire, with a flattened cross-section. In our all-vdW gated NR devices we observe conductance features that are reproducible and have low- to near-zero gate hysteresis. We also report quantized conductance, which persists to lower magnetic fields and longer channel lengths than typical InSb nanowire devices reported to date. Additionally, we observe level splitting that is highly anisotropic in an applied magnetic field, which we attribute to the ribbon cross-section. The performance of our devices is consistent with the reduced disorder expected from the all-vdW gating scheme, and marks the first report of ballistic, few-modes quantum transport in a non-vdW material with an all-vdW gate. Our results establish all-vdW gating as a promising approach for high-quality gating of non-vdW materials for quantum transport, which is in principle applicable generically, beyond InSb systems. In addition, the work showcases the specific potential of all-vdW gate/InSb NR devices for enabling clean quantum devices that may be relevant for spintronics and topological superconductivity studies.

InSb↗
DOE OSTI2021

Protein-assisted scalable mechanochemical exfoliation of few-layer biocompatible graphene nanosheets

A facile method to produce few-layer graphene (FLG) nanosheets is developed using protein-assisted mechanical exfoliation. The predominant shear forces that are generated in a planetary ball mill facilitate the exfoliation of graphene layers from graphite flakes. The process employs a commonly known protein, bovine serum albumin (BSA), which not only acts as an effective exfoliation agent but also provides stability by preventing restacking of the graphene layers. The latter is demonstrated by the excellent long-term dispersibility of exfoliated graphene in an aqueous BSA solution, which exemplifies a common biological medium. The development of such potentially scalable and toxin-free methods is critical for producing cost-effective biocompatible graphene, enabling numerous possible biomedical and biological applications. A methodical study was performed to identify the effect of time and varying concentrations of BSA towards graphene exfoliation. The fabricated product has been characterized using Raman spectroscopy, powder X-ray diffraction, transmission electron microscopy and scanning electron microscopy. The BSA-FLG dispersion was then placed in media containing Astrocyte cells to check for cytotoxicity. It was found that lower concentrations of BSA-FLG dispersion had only minute cytotoxic effects on the Astrocyte cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The local ordering of polar solvents around crystalline carbon nitride nanosheets in solution

The crystalline graphitic carbon nitride, poly-triazine imide (PTI) is highly unusual among layered materials since it is spontaneously soluble in aprotic, polar solvents including dimethylformamide (DMF). The PTI material consists of layers of carbon nitride intercalated with LiBr. When dissolved, the resulting solutions consist of dissolved, luminescent single to multilayer nanosheets of around 60–125 nm in diameter and Li+ and Br- ions originating from the intercalating salt. To understand this unique solubility, the structure of these solutions has been investigated by high-energy X-ray and neutron diffraction. Although the diffraction patterns are dominated by inter-solvent correlations there are clear differences between the X-ray diffraction data of the PTI solution and the solvent in the 4–6 Å -1 range, with real space differences persisting to at least 10 Å. Structural modelling using both neutron and X-ray datasets as a constraint reveal the formation of distinct, dense solvation shells surrounding the nanoparticles with a layer of Br - close to the PTI-solvent interface. This solvent ordering provides a configuration that is energetically favourable underpinning thermodynamically driven PTI dissolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Possible Spin-Triplet Excitonic Insulator in the Ultraquantum Limit of HfTe 5

More than 50 years ago, excitonic insulators formed by the pairing of electrons and holes due to Coulomb interactions were first predicted [A. N. Kozlov and L. A. Maksimov, Sov. J. Exp. Theor. Phys. 21, 790 (1965); L. V. Keldysh and Y. V. Kopaev, Sov. Phys. Solid State 6, 2219 (1965); D. Jérome, T. M. Rice, and W. Kohn, Phys. Rev. 158, 462 (1967)]. Since then, excitonic insulators have been observed in various classes of materials, including quantum Hall bilayers, graphite, transition metal chalcogenides, and more recently in moiré superlattices. In these excitonic insulators, an electron and a hole with the same spin bind together, and the resulting exciton is a spin singlet. Here, we report the experimental observation of a spin-triplet excitonic insulator in the ultra-quantum limit of a three-dimensional topological material HfTe 5 . We observe that the spin-polarized zeroth Landau bands dispersing along the field direction cross each other beyond a characteristic magnetic field in HfTe 5 , forming the one-dimensional Weyl mode. Transport measurements reveal the emergence of a gap of about 2⁢5⁢0 μ⁢eV when the field surpasses a critical threshold. By performing the material-specific modeling, we identify this gap as a consequence of a spin-triplet exciton formation, where electrons and holes with opposite spin form bound states, and the translational symmetry is preserved. The system reaches charge neutrality following the gap opening, as evidenced by the zero Hall conductivity over a wide magnetic field range (10–72 T). In conclusion, our finding of the spin-triplet excitonic insulator paves the way for studying novel spin transport including spin superfluidity, spin Josephson currents, and Coulomb drag of spin currents in analogy to the transport properties associated with the layer pseudospin in quantum Hall bilayers.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Measurement of the Low-Energy Electron Inelastic Mean Free Path in Monolayer Graphene

Measuring the electron-transport properties of substrate-supported nanomaterials with the traditional two-point comparison method is difficult at electron energies below 50 eV, where core-level signals are too feeble to be detected against the strong secondary-electron background. Herein, a data-driven spectral analysis technique is used to study the low-energy electron-transport properties of substrate-supported target nanomaterials, while eliminating the influence of the substrate signal. Applying this technique, the electron-transport properties of the effective attenuation length and the inelastic mean free path (IMFP) can be determined with extremely high efficiency over the entire measured energy range of 6–600 eV. Further, these results show excellent agreement with other experimental and theoretical results. In this work, significant differences are observed between monolayer graphene and the bulk graphite IMFP, which illustrates the importance of the nanometer effect in the electron-transport properties of the material. Furthermore, this technique is readily applicable to any ultrathin material that can be transferred onto a polycrystalline gold substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Atmospheric clearing of solid-particle debris using femtosecond filaments

Through nonlinear self-focusing, femtosecond pulses can propagate several kilometers beyond diffraction limits, forming an ionization channel in air known as a laser filaments. It has been demonstrated that in the wake of the filament, aerosols can be effectively cleared to improve the transmission of subsequent laser pulses or secondary light sources, pertinent to applications in atmospheric sensing. However, the current understanding of aerosol clearing is founded on interactions with droplets to simulate fogs and clouds and thus does not extend to solid particles or atmospheric debris. Using optical trapping, we isolate both graphite and silica microparticles and directly measure the subsequent displacement caused by the filament using time-resolved shadowgraphy. The shock wave from the filament is demonstrated to propel particles away from the filament, directly contributing to atmospheric debris clearing. Particles exposed to the laser light in either the intense filament core or the surrounding energy reservoir are axially displaced along the beam path. Furthermore, it is found that the optomechanical properties of the particle largely influence the axial displacement induced by laser exposure through mechanisms such as radiation pressure, mass ejection from ablation or optical damage, and particle deagglomeration.

42 ENGINEERING↗
DOE OSTI2020

Shaping the terahertz sound propagation in water under highly directional confinement

Here, we consider the possibility of shaping the high-frequency acoustic propagation in a liquid upon directional confinement. This hypothesis is investigated by inelastic x-ray scattering measurements on water confined in aligned multiwalled carbon nanotubes, in which the momentum transfer was either parallel or orthogonal to the confinement axis. The comparison between the spectra measured in these two scattering geometries highlights the anisotropic nature of the dynamic response of directionally confined water, thus potentially inspiring pathways to shape high-frequency sound propagation in isotropic systems. Finally, a Bayesian analysis of measured spectra unravels close similarities in the phonon dispersions of multiwalled nanotubes and graphite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Landau quantization of multilayer graphene on a Haldane sphere

Here, we consider the problem of multilayer graphene on a Haldane sphere and determine the Landau level spectrum for this family of systems. This serves as a generalization of the Landau quantization problem of ordinary nonrelativistic Haldane sphere and spherical graphene, or Dirac-like particles on a sphere. The Hamiltonian is diagonalized in a concise algebraic fashion exploiting two mutually commuting SU(2) algebras of the problem. Additionally, using exact wave functions we demonstrate computation of Haldane pseudopotentials in the second Landau level. These exact solutions add to the current toolkits of the numerical studies on fractional quantum Hall effects in systems of graphite multilayers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Density functionals combined with van der Waals corrections for graphene adsorbed on layered materials

Standard density functionals like Perdew-Burke-Ernzerhof (PBE) or Strongly Constrained and Appropriately Normed (SCAN) need a correction to account for long-range van der Waals (vdW) interaction. The damped Zaremba-Kohn model (dZK) starts from a formula for the vdW interaction of a distant atom with a solid surface, both with known dielectric properties, damps this formula at short range, and then treats an adsorbed molecule or atomic layer as a collection of renormalized atoms. Here, we extend this model to graphene adsorbed on semiconducting layered materials [bulk graphite and hBN, and multilayer transition metal dichalcogenides (TMD)] by including the C 4 asymptotic term and multiple electrostatic image effects due to the two surfaces of the substrate slabs in the vdW calculations. The resulting SCAN-vdW-dZK and PBE-vdW-dZK give approximately the same results for the systems considered here, in agreement with available reference values. The predicted binding energies are roughly 25% lower than those from SCAN+rVV10 (revised Vydrov and Van Voorhis 2010), and ~15% lower than those from PBE+rVV10. Since SCAN+rVV10 usually overbinds, the predicted binding energies by SCAN-vdW-dZK and PBE-vdW-dZK are expected to be closer to the true values. The predicted equilibrium binding distances from SCAN-vdW-dZK and PBE-vdW-dZK are slightly larger (~ 0.1 Å) than those from SCAN+rVV10, and close to those from SCAN. The binding energy depends upon the number of substrate layers more strongly in vdW-dZK than in rVV10. The C 4 -term contributions can be 40% of the total vdW interactions, and the C 5 term contributes about 10%. The effects of images and the back surfaces of slabs can contribute about 4–10%. The vdW interaction energy power laws from the vdW-dZK model for graphene adsorbed on multilayer MoS 2 show slowly varying decay to the pairwise exponent –4 with increasing separation $\textit{D}$, very similar to those obtained from the random-phase approximation and renormalization group approaches by Ambrosetti et al. Both the PBE-vdW-dZK and SCAN-vdW-dZK give a greater increase in interlayer binding energy when the TMD substrate changes from monolayer to four-layer for the graphene/TMD adsorption systems. This is consistent with the relevant electron-energy-loss spectroscopy experimental results showing increased dielectric response from the substrate with increasing substrate layer number.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Far-infrared absorption of undoped and Br-doped carbon nanofiber powder in stacked-cup cone configuration

In this study, we performed room-temperature far-infrared (40–650cm –1 ) transmission measurements on undoped and bromine-doped powder samples of carbon nanofibers in stacked-cup cone geometry. The transmission spectra show enhanced transmittance after bromine doping and all spectra were fit to a Drude-Lorentz (DL) model. A decreased metallic conductivity along with a redshift of the lowest semiconducting gap was found with doped samples. A significant decrease in the scattering rate upon heavy doping has been qualitatively explained as partial ordering of intercalated dopant ions. Absorption spectra were derived from the transmission spectra under the assumption of nondispersive reflectance and subsequently compared with DL-model-derived spectra. The free-carrier density of the n -type powder and the electronic mean free path were estimated and compared with reported values for single-walled nanotubes and pyrolytic graphite.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Lattice chain theories for dynamics of acoustic flexural phonons in nonpolar nanomaterials

Knowledge of lattice dynamics of acoustic flexural phonons is critically important in understanding the mechanical, electrical, and thermal properties of nanomaterials. However, the general nature of acoustic flexural phonons for the span of possible nanomaterials and the dependence of these on microscopic material properties remain unclear. Therefore, we develop general lattice chain theories to understand acoustic flexural vibrations in covalent and van der Waals lattices. Furthermore, the analytic theories suggest that the flexure branch has quadratic dispersion for low dimensional lattices in the long-wavelength limit, quite different from linear branches in bulk van der Waals bonded lattices like graphite. Surprisingly, interlayer van der Waals interactions in multilayer lattices do not determine the behavior of the flexural dispersion. The bonds of covalent interactions in multilayer and buckled monolayer lattices play different roles in determining the flexural dispersion with those in flat monolayer lattices, e.g., graphene. Further, based on the correspondence between microscopic and continuum dynamics, we provide a universal and effective approach to characterize the intrinsic bending rigidity of low dimensional nanomaterials using dispersion data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Elastic moduli of hexagonal diamond and cubic diamond formed under shock compression

The relative stiffnesses and strengths of hexagonal diamond and cubic diamond constitute long standing unresolved issues, because relevant experimental results are lacking. Laser interferometry was used to experimentally determine the longitudinal sound speeds and moduli in hexagonal diamond and cubic diamond formed during the shock compression of graphite. The hexagonal diamond longitudinal moduli are significantly larger than the cubic diamond longitudinal moduli, and even exceed averaged cubic diamond single crystal values. Here, the measured hexagonal diamond longitudinal moduli, combined with high-pressure bulk moduli for cubic diamond single crystals, show that shock-formed hexagonal diamond shear moduli are larger than the shear moduli for cubic diamond single crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Large change of interlayer vibrational coupling with stacking in Mo 1-x W x Te 2

Stacking variations in quasi-two-dimensional materials can have an important influence on material properties, such as changing the topology of the band structure. Unfortunately, the weakness of van der Waals (vdW) interactions makes it difficult to compute the stacking dependence of properties, and even in a material as simple as graphite the stacking energetics remain unclear. Mo 1 - x W x Te 2 is a material in which three differently stacked phases are conveniently accessible by temperature changes: 1 T ' , T d * , and the reported Weyl semimetal phase T d . Additionally, the transitions proceed via layer sliding, and the corresponding interlayer shear mode (ISM) is relevant not just for the stacking energetics but also for understanding the relationship between Weyl physics and structural changes. However, the interlayer interactions of Mo 1 - x W x Te 2 are not well understood, with wide variation in computed properties. We report inelastic neutron scattering of the ISM in a Mo 0.91 W 0.09 Te 2 crystal. The ISM energies are generally consistent with the linear chain model, as expected given the weak interlayer interaction, though there are some discrepancies from predicted intensities. However, the interlayer force constants K x in the T d * and 1 T ' phases are substantially weaker than that of T d at 75(3) and 83(3)%, respectively. Considering that the relative positioning of atoms in neighboring layers is approximately the same regardless of overall stacking, our results suggest that longer-range influences, such as stacking-induced electronic band-structure changes, may be responsible for the substantial change in the interlayer vibrational coupling and thus the C 55 elastic constant. These findings should elucidate the stacking energetics of Mo 1 - x W x Te 2 and other vdW layered materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗