Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “formative process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Three dimensional modeling of cirrus during the 1991 FIRE IFO 2: Detailed process study

A three-dimensional model of cirrus cloud formation and evolution, including microphysical, dynamical, and radiative processes, was used to simulate cirrus observed in the FIRE Phase 2 Cirrus field program (13 Nov. - 7 Dec. 1991). Sulfate aerosols, solution drops, ice crystals, and water vapor are all treated as interactive elements in the model. Ice crystal size distributions are fully resolved based on calculations of homogeneous freezing of solution drops, growth by water vapor deposition, evaporation, aggregation, and vertical transport. Visible and infrared radiative fluxes, and radiative heating rates are calculated using the two-stream algorithm described by Toon et al. Wind velocities, diffusion coefficients, and temperatures were taken from the MAPS analyses and the MM4 mesoscale model simulations. Within the model, moisture is transported and converted to liquid or vapor by the microphysical processes. The simulated cloud bulk and microphysical properties are shown in detail for the Nov. 26 and Dec. 5 case studies. Comparisons with lidar, radar, and in situ data are used to determine how well the simulations reproduced the observed cirrus. The roles played by various processes in the model are described in detail. The potential modes of nucleation are evaluated, and the importance of small-scale variations in temperature and humidity are discussed. The importance of competing ice crystal growth mechanisms (water vapor deposition and aggregation) are evaluated based on model simulations. Finally, the importance of ice crystal shape for crystal growth and vertical transport of ice are discussed.

Jensen, Eric J.↗
DOE OSTI2025

Formation and fate of freshwater on an ice floe in the Central Arctic

The melt of snow and sea ice during the Arctic summer is a significant source of relatively fresh meltwater. The fate of this freshwater, whether in surface melt ponds or thin layers underneath the ice and in leads, impacts atmosphere–ice–ocean interactions and their subsequent coupled evolution. Here, we combine analyses of datasets from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition (June–July 2020) for a process study on the formation and fate of sea ice freshwater on ice floes in the Central Arctic. Our freshwater budget analyses suggest that a relatively high fraction (58 %) is derived from surface melt. Additionally, the contribution from stored precipitation (snowmelt) outweighs by 5 times the input from in situ summer precipitation (rain). The magnitude and rate of local meltwater production are remarkably similar to those observed on the prior Surface Heat Budget of the Arctic Ocean (SHEBA) campaign, where the cumulative summer freshwater production totaled around 1 m during both. A relatively small fraction (10 %) of freshwater from melt remains in ponds, which is higher on more deformed second-year ice (SYI) compared to first-year ice (FYI) later in the summer. Most meltwater drains laterally and vertically, with vertical drainage enabling storage of freshwater internally in the ice by freshening brine channels. In the upper ocean, freshwater can accumulate in transient meltwater layers on the order of 0.1 to 1 m thick in leads and under the ice. The presence of such layers substantially impacts the coupled system by reducing bottom melt and allowing false bottom growth; reducing heat, nutrient, and gas exchange; and influencing ecosystem productivity. Regardless, the majority fraction of freshwater from melt is inferred to be ultimately incorporated into the upper ocean (75 %) or stored internally in the ice (14 %). Terms such as the annual sea ice freshwater production and meltwater storage in ponds could be used in future work as diagnostics for global climate and process models. For example, the range of values from the CESM2 climate model roughly encapsulate the observed total freshwater production, while storage in melt ponds is underestimated by about 50 %, suggesting pond drainage terms as a key process for investigation.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1984

Imaging Bubble Formation In a Drop Tube

Entire process under control of computer. Computer-controlled image-acquisition system tracks object, such as water bubble, as it moves in drop tube. Ultimately, such tracking system used to observe fusion-pellet formation in drop furnace.

Helizon, R.↗
NASA NTRS1986

Studies on the hot corrosion of a nickel-base superalloy, Udimet 700

The hot corrosion of a nickel-base superalloy, Udimet 700, was studied in the temperture range of 884 to 965 C and with different amounts of Na2SO4. Two different modes of degradation were identified: (1) formation of Na2MoO4-MoO3 melt and fluxing by this melt, and (2) formation of large interconnected sulfides. The dissolution of Cr2O3, TiO2 in the Na2SO4 melt does not play a significnt role in the overall corrosion process. The conditions for the formation of massive interconnected sulfides were identified and a mechanism of degradation due to sulfide formation is described. The formation of Na2MoO4-MoO3 melt requires an induction period and various physiochemical processes during the induction period were identified. The factors affecting the length of the induction period were also examined. The melt penetration through the oxide appears to be the prime mode of degradation whether the degradation is due to the formation of sulfides or the formation of the Na2MoO4-MoO3 melt.

Misra, A. K.↗
NASA NTRS2017

Interstellar and Solar Nebula Materials in Cometary Dust

Laboratory studies of cometary dust collected in the stratosphere and returned from comet 81P/Wild 2 by the Stardust spacecraft have revealed ancient interstellar grains and molecular cloud organic matter that record a range of astrophysical processes and the first steps of planetary formation. Presolar materials are rarer meteorites owing to high temperature processing in the solar nebula and hydrothermal alteration on their asteroidal parent bodies. The greater preservation of presolar materials in comets is attributed to their low accretion temperatures and limited planetary processing. Yet, comets also contain a large complement of high temperature materials from the inner Solar System. Owing to the limited and biased sampling of comets to date, the proportions of interstellar and Solar System materials within them remains highly uncertain. Interstellar materials are identified by coordinated isotopic, mineralogical, and chemical measurements at the scale of individual grains. Chondritic porous interplanetary dust particles (CP IDPs) that likely derive from comets are made up of 0.1 - 10 micron-sized silicates, Fe-Ni-sulfides, oxides, and other phases bound by organic material. As much as 1% of the silicates are interstellar grains that have exotic isotopic compositions imparted by nucleosynthetic processes in their parent stars. Crystalline silicates in CP IDPs dominantly have normal isotopic compositions and probably formed in the Solar System. 81P samples include isotopically normal refractory minerals that resemble Ca-Al rich inclusions and chondrules common in meteorites. The origins of sub-micron amorphous silicates in IDPs are not certain, but at least a few % of them are interstellar grains. The remainder have isotopic compositions consistent with Solar System origins and elemental compositions that are inconsistent with interstellar grain properties, thus favoring formation in the solar nebula [4]. The organic component in comets and primitive meteorites has large enrichments in D/H and N-15/N-14 relative to terrestrial materials. These isotopic signatures are probably due to low temperature chemical processes in cold molecular clouds or the outermost reaches of the protoplanetary disk. The greatest isotopic anomalies are found in sub-micron organic nanoglobules that show chemical signatures of interstellar chemistry. The observation that cometary dust is mostly composed of isotopically normal minerals within isotopically anomalous organic matter is difficult to reconcile with the formation models of each component. The mineral component likely formed in high temperature processes in the inner Solar System, while the organic fraction shows isotopic and chemical signatures of formation near 10 K. Studying more primitive remnants of the Solar System starting materials would help in resolving this paradox. Comets formed across a vast expanse of the outer disk under differing thermal and collisional regimes, and some are likely to be better preserved than others. Finding truly pristine aggregates of presolar materials may require return of a pristine sample of comet nucleus material.

Messenger, Scott↗
NASA NTRS2003

Maximum Rates of Olivine Dissolution on Mars

This work is a first step in constraining olivine alteration rates on Mars. By bounding dissolution rates of olivine, we can make inferences about the temporal extent of aqueous alteration on the surface. Several hypothesized low-temperature surface aqueous alteration processes include valley network formation from release of groundwater during impact or gully formation from snow melt, both of which may occur over a period of several thousand years. Outflow channels may have formed during brief floods lasting less than a year. If large bodies of water were present during a warm, wet period, large standing bodies of water may have been present for 104 to 109 years. High-temperature alteration processes include hydrothermal activity associated with impacts and magmatic features. These features may remain active for 104 to 106 years. Table 2 summarizes speculated duration times of these aqueous processes. For comparison, we have determined minimum olivine residence times (time until complete dissolution) for 1 mm diameter particles to range from much less than one year to approximately 5,000 years.

J D Stopar↗
DOE OSTI2020

Mineralogy of microbially induced calcium carbonate precipitates formed using single cell drop-based microfluidics

Microbe-mineral interactions are ubiquitous and can facilitate major biogeochemical reactions that drive dynamic Earth processes such as rock formation. One example is microbially induced calcium carbonate precipitation (MICP) in which microbial activity leads to the formation of calcium carbonate precipitates. A majority of MICP studies have been conducted at the mesoscale but fundamental questions persist regarding the mechanisms of cell encapsulation and mineral polymorphism. Here, we are the first to investigate and characterize precipitates on the microscale formed by MICP starting from single ureolytic E. coli MJK2 cells in 25 µm diameter drops. Mineral precipitation was observed over time and cells surrounded by calcium carbonate precipitates were observed under hydrated conditions. Using Raman microspectroscopy, amorphous calcium carbonate (ACC) was observed first in the drops, followed by vaterite formation. ACC and vaterite remained stable for up to 4 days, possibly due to the presence of organics. The vaterite precipitates exhibited a dense interior structure with a grainy exterior when examined using electron microscopy. Autofluorescence of these precipitates was observed possibly indicating the development of a calcite phase. The developed approach provides an avenue for future investigations surrounding fundamental processes such as precipitate nucleation on bacteria, microbe-mineral interactions, and polymorph transitions.

58 GEOSCIENCES↗
DOE OSTI2021

A Grand Challenge "Uncertainty Project" to Accelerate Advances in Earth System Predictability: AI-Enabled Concepts and Applications

This proposal is emerging from GISS ModelE3 ESM development in the area of cloud physics, so we begin with an example of research needs/gaps from that work. Here, some of our greatest development concerns arise where we lack fundamental process-level understanding, as in ice formation. Namely, it is currently unclear what is the main process that is forming the majority of ice crystals in commonly occurring convection, apparently via secondary ice production at warm temperatures. We are keenly awaiting laboratory data for candidate mechanisms, which is not yet in hand to crucially establish their efficiency. Our progress is also hampered by a lack of uncertainty characterization in currently available measurements of ice crystal number size distributions. Furthermore, the same multiplication process may be responsible for a majority of ice crystals in many extratropical mixed-phase clouds, whose variable representation in CMIP6 ESMs may be a leading cause of differences in cloud phase feedback and ECS. Yet we have been required to deliver an ESM with the cloud physics knowledge at hand. The proposed grand challenge project is AI-enabled via application of machine learning (ML) to climate model and observational data streams (focal area 3), and applications include AI-guided observing system design and model/component/parameterization selection (areas 1 and 2). The project is structurally agnostic as to whether model or observing system components use AI approaches or not, but uncertainties must be estimated and propagatable in both.

58 GEOSCIENCES↗
NASA NTRS1987

High resolution thermal infrared mapping of Martian channels

Viking Infrared Thermal Mapper (IRTM) high resolution (2 to 5 km) data were compiled and compared to Viking Visual Imaging Subsystem (VIS) data and available 1:5M geologic maps for several Martian channels including Dao, Harmakhis, Mangala, Shalbatana, and Simud Valles in an effort to determine the surface characteristics and the processes active during and after the formation of these channels. Results show a dominance of aeolian processes active in and around the channels. These processes have left materials thick enough to mask any genuine channel deposits. Results also indicate that very comparable Martian channels and their surrounding terrain are blanketed by deposits which are homogeneous in their thermal inertia values. However, optimum IRTM data does not cover the entire Martian surface and because local deposits of high thermal inertia material may not be large enough in areal extent or may be in an unfavorable location on the planet, a high resolution data track may not always occur over these deposits. Therefore, aeolian processes may be even more active than the IRTM data tracts can always show.

Craddock, R. A.↗
NASA NTRS1988

Dust discs around low-mass main-sequence stars

The current understanding of the formation of circumstellar disks as a natural accompaniment to the process of low-mass star formation is examined. Models of the thermal emission from the dust disks around the prototype stars Alpha Lyr, Alpha PsA, Beta Pic, and Epsilon Eri are discussed, which indicate that the central regions of three of these disks are almost devoid of dust within radii ranging between 17 and 26 AU, with the temperature of the hottest zone lying between about 115 and 210 K. One possible explanation of the dust-free zones is the presence of a planet at the inner boundary of each cloud which sweeps up grains crossing its orbit.

Wolstencroft, R. D.↗
NASA NTRS2003

From the South Pole to the Northern Plains: The Argyre Planitia Story

Parker (1985, 1994) first described evidence for catastrophic flooding from a large lake or sea within Argyre Planitia through the Uzboi-Holden- Ladon-Margaritifer Valles system during the Noachian. The channel connection to Argyre had been recognized during the mid-1970s, based primarily on Russian orbiter images taken at that time. The most critical reviews of these inferences related to the relative timing of the plains materials, sinuous ridges, and debris aprons in southern Argyre, and the connection, via Uzboi Vallis, of ponding within Argyre to flooding through the Chryse Trough. The prevailing "competing" hypothesis for formation of materials within Argyre is that they are a result of south circumpolar glacial processes, with glacial scour and stagnation producing the pitting and sinuous ridges (eskers) on the basin floor rather than lacustrine erosion and deposition followed much later by a process akin to rock glacier formation of the debris aprons in a colder Amazonian climate. Argyre was part of a larger surface hydrological system that also included two large valley networks draining the Margaritifer Sinus region northwest of Argyre. The morphometry of these systems suggest a combination of precipitation and groundwater sapping, with surface runoff for their formation.

T J Parker↗
NASA NTRS2004

Lunar and Planetary Science XXXV: Chondrules: The Never-Ending Story

The session "Chondrules: The Never-Ending Story" included the following reports:Dust Size Distribution in Solar Nebula Inferred from Shock-Wave Heating Model for Chondrule Formation; Collisional Destruction of Chondrules in Shock Waves and Inferred Dust to Gas Mass Ratio; Evaporation and Accompanying Isotopic Fractionation of Sulfur from Fe-S Melt During Shock Wave Heating ; Evaporation During Chondrule Formation, Recondensation as Fine Particles, and the Condensation of S and Other Volatile Elements; Fe Isotopes and the Formation of Chondrules; Pristine and Processed Metal in CR Chondrites: Condensation in the Solar Nebula and Partial Reequilibration During Chondrule Formation; Variation of the Condensation Path of Supercooled Silicate Melt; Volatile and Moderately Volatile Trace Element Composition of Chondrules and Matrix from CM Chondrites: Implications for Chondrule Formation; Opaque Mineral Assemblages at Chondrule Boundaries in the Vigarano CV Chondrite: Evidence for Gas-Solid Reactions Following Chondrule Formation; Forsterite and Olivine in Sahara-97210 (LL3.2) and Chainpur (LL3.4) Chondrules: Compositional Evolution and the Influence of Melting; The Vaguries of Pyroxene Nucleation and the Resulting Chondrule Textures; Contemporaneous Formation of Chondrules in the Al-26-Mg-26 System for Ordinary and CO Chondrites; and Al-Mg Isotopic Systematics in Ferromagnesian Chondrules from the Unequilibrated Ordinary Chondrite.

Source record↗
NASA NTRS2021

Preconditioning of overcast-to-broken cloud transitions by riming in marine cold air outbreaks

Marine cold air outbreaks (CAOs) commonly form overcast cloud decks that transition into broken cloud fields downwind, dramatically altering the local radiation budget. In this study, we investigate the impact of frozen hydrometeors on these transitions. We focus on a CAO case in the NW Atlantic, the location of the multi-year flight campaign ACTIVATE (Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment). We use MERRA-2 (Modern-Era Retrospective analysis for Research and Applications, version 2) reanalysis fields to drive large eddy simulations with mixed-phase two-moment microphysics in a Lagrangian framework. We find that transitions are triggered by substantial rain (rainwater paths >25 g m−2), and only simulations that allow for aerosol depletion result in sustained breakups, as observed. Using a range of diagnostic ice nucleating particle concentrations, Ninp, we find that increasing ice progressively accelerates transitions, thus abbreviating the overcast state. Ice particles affect the cloud-topped boundary layer evolution, primarily through riming-related processes prior to substantial rain, leading to (1) a reduction in cloud liquid water, (2) early consumption of cloud condensation nuclei, and (3) early and light precipitation cooling and moistening below cloud. We refer to these three effects collectively as “preconditioning by riming”. Greater boundary layer aerosol concentrations available as cloud condensation nuclei (CCN) delay the onset of substantial rain. However, cloud breakup and low CCN concentration final stages are found to be inevitable in this case, due, primarily, to liquid water path buildup. An ice-modulated cloud transition speed suggests the possibility of a negative cloud–climate feedback. To address prevailing uncertainties in the model representation of mixed-phase processes, the magnitude of ice formation and riming impacts and, thereby, the strength of an associated negative cloud–climate feedback process, requires further observational evaluation by targeting riming hot spots with in situ imaging probes that allow for both the characterization of ice particles and abundance of supercooled droplets.

Marine cold air outbreaks↗
NASA NTRS1983

Packet telemetry and packet telecommand - The new generation of spacecraft data handling techniques

Because of rising costs and reduced reliability of spacecraft and ground network hardware and software customization, standardization Packet Telemetry and Packet Telecommand concepts are emerging as viable alternatives. Autonomous packets of data, within each concept, which are created within ground and space application processes through the use of formatting techniques, are switched end-to-end through the space data network to their destination application processes through the use of standard transfer protocols. This process may result in facilitating a high degree of automation and interoperability because of completely mission-independent-designed intermediate data networks. The adoption of an international guideline for future space telemetry formatting of the Packet Telemetry concept, and the advancement of the NASA-ESA Working Group's Packet Telecommand concept to a level of maturity parallel to the of Packet Telemetry are the goals of the Consultative Committee for Space Data Systems. Both the Packet Telemetry and Packet Telecommand concepts are reviewed.

Hooke, A. J.↗
DOE OSTI2023

TRACER-VOC: Speciated Volatile Organic Compounds at the Tracking Aerosol Convection Interactions Experiment Field Campaign Report

Formation of secondary organic aerosol (SOA) is responsible for the growth of particles into cloud condensation nuclei (CCN)-relevant sizes and accounts for a substantial fraction of aerosol mass in the troposphere. Despite its wide abundance and importance, capturing SOA in regional and climate models is still challenging due to complex chemical transformations involved in production of SOA. Oxidation products of biogenic hydrocarbons, such as isoprene, monoterpenes, and sesquiterpenes account for the largest fraction of SOA mass over the continents. As such, biogenic SOA is an important source of continental CCN, and has been recently shown to nucleate ice in the deposition mode. To better account for the processes involved in SOA formation in global and regional climate models, we need better measurements of sources and transformations of volatile organic compounds (VOCs), the precursors to SOA formation in the atmosphere. Understanding aerosol-deep convection interactions is an important science driver of the Tracking Aerosol Convection Interactions Experiment (TRACER), requiring a characterization of the critical controls on aerosol properties and processes, and how those properties and processes vary spatially and temporally in the Houston area. In that environment, the atmospheric photo-oxidative chemistry that drives the evolution and transformation of aerosol properties and processes is strongly impacted by the emission of VOCs, which have both anthropogenic (e.g., industrial, urban, transportation, biomass burning) and biogenic (e.g., marine) sources in the region. Understanding (and disentangling) the complex role of VOCs in such a heterogenous region requires high-time-resolution, speciated VOC measurements that are spatially resolved. To meet these measurement requirements, the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s time-of-flight proton transfer reaction-mass spectrometer (ToF-PTR-MS) was deployed during the TRACER intensive operational period (IOP) from June to September, 2022 at the ancillary site (ANC), which was sited to provide a characterization of the rural atmospheric environment in contrast to the main site.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Soil microbial ecology and microbiome-metabolite linkages improve understanding of ecosystem states along terrestrial-aquatic interfaces

These data are from Bandopadhyay et al., "Soil microbial ecology and microbiome-metabolite linkages improve understanding of ecosystem states along terrestrial-aquatic interfaces". This study aims to understand the soil microbial ecology along terrestrial-aquatic interfaces of a freshwater and estuarine region and how it relates to organic matter. We analyzed soil microbial (16S rRNA gene) and organic matter (Fourier-transform ion cyclotron resonance mass spectrometry, FTICR-MS) composition from upland (forested), transition (stressed forest), and wetland positions at three sites in each of the Lake Erie (freshwater) and Chesapeake Bay (estuarine) regions. This dataset includes 16S rRNA gene amplicon data (only processed file types included here) and organic matter composition from FTICR-MS data (raw and processed files included here) from upland (forested), transition (stressed forest), and wetland positions at three sites in each of the Lake Erie and Chesapeake Bay regions. These sites are part of the COMPASS-FME project (https://compass.pnnl.gov/FME/COMPASSFME). File formats and software needed to access files: 16S rRNA gene amplicon data: These files follow the format reported here https://ess-dive.gitbook.io/amplicon-sequencing-reporting-format#updates-in-v1.0.1. As per this format, there are four file types reported: 1. Taxon tables (also called sequence-by-sample or OTU (operational taxonomic unit)/ESV (exact sequence variant) tables) : available in a .txt file format and accessible using TextEdit or MS Excel. 2. Representative sequences (also called consensus sequences) : available in a .fasta format and accessible using TextEdit. 3. Sequencing metadata : available in a MS Excel workbook file format and CSV file format 4. Bioinformatic metadata : available in a MS Excel workbook file format and CSV file format FTICR-MS data: 1. Raw data converted to a processed file with intensities of the peaks in the given samples : available in a MS Excel CSV file format 2. Processed file used in analyses and visualizations (appended as icr_long_) : available in a MS Excel CSV file format 3. Metadata file for ICR features (appended as icr_meta) : available in a MS Excel CSV file format

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1981

Global simulation of auroral arcs

Numerical simulation of global formation of auroral arcs is carried out for a three-dimensional coupled ionosphere-magnetosphere system. With the presence of the stationary convection electric field, the field-aligned current driven by the polarization and drift of the ionospheric conductivity enhancement is shown to be responsible for the feedback instability of the shear Alfven wave. The simulation result demonstrates the dynamic process of auroral arc formation, where an ionospheric perturbation nearly resonant with the magnetospheric Alfven wave (toroidal mode) can eventually grow into auroral arcs. Many of the important characteristics of quiet auroral arcs are demonstrated, and it is shown that the overall distribution of auroras depends critically on the stationary state of the auroral oval characterized by the large-scale Birkeland current, the electric field, and the electron density distribution.

Miura, A.↗
DOE OSTI2023

SootLib: A soot model library for combustion simulation

Soot formation in combustion is an important process that affects radiative heat transfer, flame temperatures, and emissions with health and environmental impacts. Soot formation involves complex chemistry for nucleation, growth, oxidation, and coagulation processes. The soot particles vary widely in size and accurate modeling requires representation of the particle size distribution (PSD). Modeling soot is not trivial, and is only one of several physical processes active in combustion systems. This paper presents a software package called SootLib, which is an open-source library for modeling soot formation and other aerosol systems. SootLib is written in C++, is documented with Doxygen, and is available on GitHub. The library includes several models for soot chemistry and coagulation, and it represents the PSD using either a sectional model or the method of moments (MOM). Four closure approaches for the MOM are implemented allowing up to eight moments: monodispersed, an assumed-shape lognormal distribution, the quadrature method of moments, and the method of moments with interpolative closure. SootLib provides an interface for inclusion in other combustion packages including CFD or reacting flow solvers. The range of models allows comparisons and sensitivity studies, and the modularity facilitates extension to other soot models.

97 MATHEMATICS AND COMPUTING↗