Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “entry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Thermodynamic energy balance equations for Space Shuttle Orbiter gas compartment during ascent and re-entry

Thermodynamic energy balance equations are derived and applied to midsection Orbiter-payload atmospheric thermal math models (TMMs) to predict Orbiter component, element, compartment, internal insolation and structure temperatures in support of NASA/JSC mission planning, postflight thermal analysis and payload thermal integration planning. The equations are extended and applied to the forward section, midsection, and aft section of the TMMs for five Orbiter mission phases: prelaunch on pad with purge, lift-off to ascent, re-entry to touchdown, post landing without purge, and post-landing with purge. Predicted results from the 390 node/DFI atmospheric TMM are in good agreement with STS-1 flight measurement data.

Ting, P. C.↗
NASA NTRS1982

Plume/flowfield jet interaction effects on the Space Shuttle Orbiter during entry

A comparison of wind tunnel test results with actual flight test data from the performance of the Orbiter Reaction Control System during the STS-1 and -2 flights is presented. Jet interaction phenomena were modeled analytically and a decision was made to develop a jet interaction scaling parameter from empirical measurements wherever possible. A number of different scaling parameters resulted, and errors bounds were determined for tunnel-to-tunnel differences, model to tunnel differences, balance accuracy, real gas effects, varying nozzle configurations, and angle of sideslip. Flight test data has concentrated on the lateral/directional jet interaction of the aft yaw jets, which operate almost continuously from entry down to Mach 1 conditions. A discussion of rolling moments, side forces, and results of usage of the aft pitch and roll jets indicates an underprediction of the side force and yawing moment and overprediction of pitch and roll jet effects.

Kanipe, D. B.↗
NASA NTRS1982

The development and application of aerodynamic uncertainties in the design of the entry trajectory and flight control system of the Space Shuttle Orbiter

In connection with the decision to conduct with the Shuttle an orbital, manned mission on its first launch, certain problems arose related to mission safety, which had to be provided without the benefit of either a graduated flight test program or an initial unmanned flight concept. In an attempt to overcome these problems, the philosophy was adopted to provide a reasonable estimate of maximum possible errors in the preflight predicted aerodynamics. The flight control system (FCS) was to be certified on the basis of the estimated errors prior to STS-1. A set of 'worst case' aerodynamic uncertainties, defined as variations, was developed. As part of the first flight certification, variations, combined with other system uncertainties, were used to 'stress' the FCS through a multitude of simulations. Attention is given to an Orbiter description, the entry mission, the correlation of aerodynamic uncertainties, the application of aerodynamic variation in FCS and trajectory design, and the flight test results.

Gamble, J. D.↗
NASA NTRS1982

Shuttle entry performance and stability and control derivatives extraction from flight measurement data

Flight data taken from three Shuttle Space Transportation System flights (STS-1, 2, and 3) during entry are analyzed to determine the shuttle performance and aerodynamic characteristics. Correlations of the performance coefficients and the stability and control derivatives with preflight predictions are presented over the hypersonic speed range from Mach 2 to 25. In addition, an evaluation of the effectiveness of the onboard Reaction Control System (RCS) is given and an effort is made to independently quantify the combined impingement and flow-field interaction effects on the spacecraft rolling moment. Comparisons of stability and control derivatives extracted for the same flight conditions, but using data from different onboard sensors are also made. Results obtained using the same flight data, but different computer software are also shown.

Compton, H. R.↗
NASA NTRS1982

Preliminary analysis of STS-4 entry flight data

A preliminary analysis of the data obtained during entry of the STS-4 Flight was completed. Planned maneuvers were flown during this flight to increase the quality of stability and control analysis, similar to the techniques used during STS-3. The derivatives obtained from STS-4 agreed fairly well with the derivatives obtained on previous flights. The dependence of aileron effectiveness on a elevon position above a Mach number of 10 seen on STS-3 was conclusively verified on STS-4. CSS Mode was engaged to fly the heading alignment circle. After engagement, several cycles of a low amplitude pilot induced oscillation (1 deg/sec) at about 0.3 hertz can be seen. No PIO suppressor activity was seen between preflare and touchdown. This approach demonstrates the advantage of the shallow final glideslope approach. In this type of approach, the pilot is not required to make accurate altitude judgments since an acceptable landing can be made without performing the final flare.

Source record↗
NASA NTRS1982

Approximate Method of Calculating Heating Rates at General Three-Dimensional Stagnation Points During Atmospheric Entry

An approximate method for calculating heating rates at general three dimensional stagnation points is presented. The application of the method for making stagnation point heating calculations during atmospheric entry is described. Comparisons with results from boundary layer calculations indicate that the method should provide an accurate method for engineering type design and analysis applications.

Hamilton, H. H., II↗
NASA NTRS1983

Experimental assessment of a computer program used in Space Shuttle orbiter entry heating analysis

A high temperature reusable surface insulation (HRSI) tile taken from the Space Shuttle orbiter was subjected to a nominal heating rate of 60 kW/sq m in the laboratory. The surface temperature response to this heating was measured and used as input to a computer program which computed the applied heating rate. The program is part of a software system that is used to infer convective heating rates to the orbiter thermal protection system during entry. The measured and computed heating rates are compared. Results confirm the applicability of this program to the determination of flight heat transfer rates from flight measured surface temperature data.

Wells, W. L.↗
NASA NTRS1983

Predictions of entry heating for lower surface of shuttle orbiter

A broad base of thermocouple and phase change paint data was assembled and correlated to the nominal design 14414.1 and proposed STS-1 (first flight of the space transportation system) entry trajectories. Averaged data from phase change paint tests compared favorably with thermocouple data for predicting heating rates. Laminar and turbulent radiation equilibrium heating rates were computed on the lower surface of the Shuttle orbiter for both trajectories, and the lower surface center line results were compared both with aerodynamic heating design data and with flight values from the STS-1 and STS-2 trajectories. The peak laminar heating values from the aerodynamic heating design data book were generally 40 to 60 percent higher than the laminar estimates of this study, except at the 55 percent location of maximum span where the design data book values were less than 10 percent higher. Estimates of both laminar and turbulent heating rates compared favorably with flight data.

Edwards, C. L. W.↗
NASA NTRS1983

Columbia: The first five flights entry heating data series. Volume 4: The lower windward wing 50 percent and 80 percent semispans

Entry heating flight data and wind tunnel data on the lower wing 50% and 80% Semi-Spans are presented for the first five flights of the Space Shuttle Orbiter. The heating rate data is presented in terms of normalized film heat transfer coefficients as a function of angle-of-attack, Mach number, and Normal Shock Reynolds number. The surface heating rates and temperatures were obtained via the JSC NONLIN/INVERSE computer program. Time history plots of the surface heating rates and temperatures are also presented.

Williams, S. D.↗
NASA NTRS1983

Columbia: The first five flights entry heating data series. Volume 3: The lower windward surface centerline

Entry heating flight data and wind tunnel data on the lower surface centerline are presented in terms of normalized film heat transfer coefficients as a function of angle-of-attack, Mach number, and Normal Shock Reynolds number. The surface heating rates and temperatures were obtained via the JSC NONLIN/INVERSE computer program. Time history plots of the surface heating rates and temperatures are also presented.

Williams, S. D.↗
NASA NTRS1983

Columbia: The first five flights entry heating data series. Volume 2: The OMS Pod

Entry heating flight data and wind tunnel data on the OMS Pod are presented for the first five flights of the Space Shuttle Orbiter. The heating rate data are presented in terms of normalized film heat transfer coefficients as a function of angle-of-attack, Mach number, and normal shock Reynolds number. The surface heating rates and temperatures were obtained via the JSC NONLIN/INVERSE computer program. Time history plots of the surface heating rates and temperatures are also presented.

Williams, S. D.↗
NASA NTRS1983

Orbiter entry leeside heat-transfer data analysis

Heat-transfer data measured along the Space Shuttle Orbiter's leeward centerline and over the wing leeside surface during the STS-2 and STS-3 mission entries are presented. The flight data are compared with available wind-tunnel results. Flight heating levels are, in general, lower than those which are inferred from the wind-tunnel results. This result is apparently due to the flight leeside flowfield remaining laminar over a larger Reynolds number range than that of corresponding ground test results. The flight/wind-tunnel data comparisons confirm the adequacy of, and conservatism embodied in, the direct application of wind-tunnel data at flight conditions for the design of Orbiter leeside thermal protection.

Throckmorton, D. A.↗
NASA NTRS1983

An experimental heat-transfer investigation of an advanced winged entry vehicle at Mach 10

Heat-transfer measurements have been made at Mach 10 in air on an instrumented 0.006-scale model of an advanced winged entry vehicle. Data were obtained at 83 thermocouple stations which include locations on the lower and upper surface centerlines, spanwise positions along the lower and upper surfaces of the wing, the lower surface of the body flap, and radial locations on the fuselage. Data were obtained for angles of attack ranging from 0 to 45 deg, sideslip angles of + or - 2 deg, Reynolds numbers of 0.5, 1.0 and 2.0 million per foot, and body-flap deflections of 0, 10, and 20 deg. The data generally indicate increased windward heating and decreased leeside heating with increased angle of attack, significantly increased body-flap heating with deflection angle, and minor variations in heating with sideslip, increasing in magnitude with angle of attack. Windward centerline data are shown to be in fair agreement with results of predictions based on an approximate engineering method.

Wurster, K. E.↗
NASA NTRS1983

Space shuttle entry longitudinal aerodynamic comparisons of flights 1-4 with preflight predictions

The Space Shuttle orbiter flight test program has required the aerodynamicist to take a new approach in determining flight characteristics. A conventional flight test program of slowly and cautiously approaching more severe flight conditions was not possible with the orbiter. On the first four orbital flights, The orbiter entered the atmosphere at approximately Mach 29 and decelerated through the Mach range (the subsonic portion of flight had also been flown by another orbiter vehicle during the Approach and Landing Test Program). Certification for these flights was achieved by an extensive wind tunnel test and analysis program. The initial series of flights of the orbiter were heavily instrumented for the purpose of obtaining accurate aerodynamic data. The flight data derived from the entry Mach range provided comparisons between flight and wind tunnel derived predicted data in the areas of both aerodynamic performance and longitudinal trim.

Romere, P. O.↗
NASA NTRS1983

The application of aerodynamic uncertainties in the design of the entry trajectory and flight control system of the space shuttle orbiter

The process used in the application of aerodynamic uncertainties for the design and verification of the Space Shuttle Orbiter Entry Flight Control System is presented. The uncertainties were used to help set center of gravity, angle of attack and dynamic pressure lateral control divergence parameter as well as C sub n sub beta dynamic were instrumental in setting these placards.

Gamble, J. D.↗
NASA NTRS1983

Orbiter windward surface entry Heating: Post-orbital flight test program update

Correlations of orbiter windward surface entry heating data from the first five flights are presented with emphasis on boundary layer transition and the effects of catalytic recombination. Results show that a single roughness boundary layer transition correlation developed for spherical element trips works well for the orbiter tile system. Also, an engineering approach for predicting heating in nonequilibrium flow conditions shows good agreement with the flight test data in the time period of significant heating. The results of these correlations, when used to predict orbiter heating for a high cross mission, indicate that the thermal protection system on the windward surface will perform successfully in such a mission.

Harthun, M. H.↗
NASA NTRS1984

Columbia: The first five flights. Entry heating data series. Volume 6: The upper leeside surface centerline

The aerothermodynamic performance of the Space Shuttle Orbiter during reentry is assessed from the collected data of the first five flights. The entry heating data is restricted to the upper leeside surface centerline of the orbiter. Surface heating and temperature data are analyzed by a variety of computer programs and presented in graphic form. Wind tunnel test data is also included.

Williams, S. D.↗