Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “enhanced kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Surprisingly high irradiation-induced defect mobility in Fe 3 O 4 as revealed through in situ transmission electron microscopy

Radiation-induced defects are expected to change the corrosion kinetics when a material is exposed to a corrosive environment. Characterization of the defects forming under irradiation and their ability to move/diffuse is therefore key to understanding how they impact the corrosion kinetics and possibly mechanisms. For that matter, Fe/Fe 3 O 4 interfaces were irradiated using 1 MeV Kr 2+ at temperatures of 273 K (25 °C), 573 K (300 °C) and 773 K (500 °C) to a maximum dose of 10 dpa (as measured in the Fe matrix) in situ in a transmission electron microscope. The evolution of the microstructure was followed as a function of the dose and temperature. The formation of defects was followed in the metal and the oxide as well as at the metal/oxide interface and characterized in terms of size and density. Additionally, the dynamic observation of the spatial distribution of the defects allowed for a qualitative assessment of the mobility of defects in the oxide as a function of temperature, revealing evidence for enhanced mobility even more so than in the Fe matrix. Mechanisms of induced defect mobility in the spinel are discussed to account for the observations.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Electron trapping in rad-hard RCA IC's irradiated with electrons and gamma rays

Enhanced electron trapping has been observed in n-channels of rad-hard CMOS devices due to electron and gamma-ray irradiation. Room-temperature annealing results in a positive shift in the threshold potential far beyond its initial value. The slope of the annealing curve immediately after irradiation was found to depend strongly on the gate bias applied during irradiation. Some dependence was also observed on the electron dose rate. No clear dependence on energy and shielding over a delidded device was observed. The threshold shift is probably due to electron trapping at the radiation-induced interface states and tunneling of electrons through the oxide-silicon energy barrier to fill the radiation-induced electron traps. A mathematical analysis, based on two parallel annealing kinetics, hole annealing and electron trapping, is applied to the data for various electron dose rates.

Danchenko, V.↗
NASA NTRS2021

On the Presence and Thermalization of Cold Ions in the Exhaust of Antiparallel Symmetric Reconnection

Using fully kinetic 2.5 dimensional particle-in-cell simulations of anti-parallel symmetric magnetic reconnection, we investigate how initially cold ions are captured by the reconnection process, and how they evolve and behave in the exhaust. We find that initially cold ions can remain cold deep inside the exhaust. Cold ions that enter the exhaust downstream of active separatrices, closer to the dipolarization front, appear as cold counter-streaming beams behind the front. In the off-equatorial region, these cold ions generate ion-acoustic waves that aid in the thermalization both of the incoming and outgoing populations. Closest to the front, due to the stronger magnetization, the ions can remain relatively cold during the neutral plane crossing. In the intermediate exhaust, the weaker magnetization leads to enhanced pitch angle scattering and reflection. Cold ions that enter the exhaust closer to the X line, at active separatrices, evolve into a thermalized exhaust. Here, the cold populations are heated through a combination of thermalization at the separatrices and pitch angle scattering in the curved magnetic field around the neutral plane. Depending on where the ions enter the exhaust, and how long time they have spent there, they are accelerated to different energies. The superposition of separately thermalized ion populations that have been accelerated to different energies form the hot exhaust population.

Cecilia Norgren↗
DOE OSTI2022

Improvements to the Griffin Transport Solvers

Griffin is a Multiphysics Object-Oriented Simulation Environment (MOOSE) based reactor multiphysics analysis application jointly developed by Idaho National Laboratory and Argonne National Laboratory. The code includes a variety of steady-state solvers for fixed-source, k-eigenvalue, adjoint, and subcritical multiplication, as well as transient solvers for point-kinetics, improved quasi-static, and spatial dynamics. This document summarizes the transport solver development efforts pursued during Fiscal Year 2022. We added the multiphysics transient capability for the coarse-mesh finite difference accelerated Richardson iteration for discontinuous finite element method discrete ordinates (DFEM-SN) scheme to support high-order heterogeneous transport simulations. HFEM (hybrid finite element method) - PN (spherical harmonics expansion) was completed and red-black iteration was added for solving the HFEM-PN system with both preconditioned Jacobian-free Newton Krylov and Richardson iteration solvers. The HFEM-PN scheme, as one of the low-order transport schemes, is expected for supporting routine design simulations. Pin power reconstruction capability was also designed and implemented with the Griffin ISOXML module to enhance all the low-order transport solvers for more accurate multiphysics simulations. Numerical results are presented for demonstrating the capabilities and verifying their performance, and future works are discussed.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2005

Experiments and Models for Polymeric Microsphere Foams

The current project was performed under the direction of Dr. Byron Pipes as its lead investigator from January 2001 to August 2004. With the permission of the NASA, the project was transferred to Dr. Thein Kyu as the principle investigator for the period of September 2004 - June 2005. There were two major thrust areas in the original proposal; (1) experimental characterization and kinematics of foam structure formation and (2) determination of the mechanical, physical, and thermal properties, although these thrust areas were further sub- divided into 7 tasks. The present project has been directed primarily to elucidate kinematics of micro-foam formation (tasks 1 and 3) and to characterize micro-foam structures, since the control of the micro-structure of these foams is of paramount importance in determining their physical, mechanical and thermal properties. The first thrust area was accomplished in a timely manner; however, the second thrust area of foam properties (tasks 2,4-7) has yet to be completed because the area of kinematics of foam structure formation turned out to be extremely complex and thus consumed more time than what have been anticipated. As will be reported in what follows, the present studies have greatly enhances the in-depth understanding of mechanisms and kinematics of the micro-foam formation from solid powders. However, in order to implement all objectives of the second thrust areas regarding investigations of mechanical, physical, and thermal properties and establishment of the correlation of structure - properties of the foams, the project needs additional time and resources. The technical highlights of the accomplishment are summarized as follows. The present study represents a first approach to understanding the complexities that act together in the powder foaming process to achieve the successful inflation of polyimide microstructures. This type of study is novel as no prior work had dissected the fundamentals that govern the inflation process in this type of systems. The systematic approach to each of the different phenomena (i.e. morphological, diffusive, kinetic and dynamic) brings into context each of them in a way that allows separate understanding and analysis. Of the different phenomena studied, probably the one that gives a higher level of control over the inflation process has been shown to be the morphological aspects of the precursor particles. It is a major contribution of the present work to isolate and identify this phenomenon and highlight the features that with careful control during the synthesis of the precursor material can lead to a highly optimized and specialized final product (neat foam or microstructure). Some of these accomplishments have been presented in various national meetings and some of which are either published in refereed journals or still in various stages of publications. One of the presentations was selected for "Best of ANTEC 2004" Online Presentation Series of the Society of Plastics Engineers (SPE) (September 2004)

Pipes, R. Byrona↗
DOE OSTI2023

Enhanced Iodine Capture Using a Postsynthetically Modified Thione–Silver Zeolitic Imidazole Framework

Efficient management of radionuclides that are released from various processes in the nuclear fuel cycle is of significant importance. Among these nuclides, radioactive iodine (mainly 129 I and 131 I) is a major concern due to the risk it poses to the environment and to human health; thus, the development of materials that can capture and safely store radioactive iodine is crucial. Herein, a novel silver-thione-functionalized zeolitic imidazole framework (ZIF) was synthesized via post-synthetic modification and assessed for its iodine uptake capabilities alongside the parent ZIF-8 and intermediate materials. A solvent-assisted ligand exchange procedure was used to replace the 2-methylimidazole linkers in ZIF-8 with 2-mercaptoimidazole, forming the intermediate compound ZIF-8=S, which was reacted with AgNO 3 to yield the ZIF-8=S-Ag + composite for iodine uptake. Despite possessing the lowest BET surface area of the derivatives, the Ag-functionalized material demonstrated superior I 2 adsorption in terms of both maximum capacity (550 g I 2 /mol) and rapid kinetics (50% loading achieved in 5 hrs, saturation in 50 hrs) compared to our pristine ZIF-8, which reached 450 g I 2 /mol after 150 hours and 50% loading in 25 hours. This improvement is attributed to the presence of the Ag + ions, which provide a strong chemical driving force to form stable Ag-I species. In conclusion, the results of this study contribute to a broader understanding of the strategies that can be employed to engineer adsorbents with robust iodine uptake behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Physics-Based Real-time Analysis and Control to Achieve Transient-Free Operations for the ITER Era (Final Report)

This is the final report for the early career award for Prof. Egemen Kolemen that aimed to develop the physics and technical basis of real-time transient – i.e. disruptions and Edge Localized Modes (ELMs) – avoidance and feedback control at the DIII-D nuclear fusion facility for the ITER era. During this project, we reconstructed high quality real-time DIII-D equilibria using kinetic information from the motional Stark effect (MSE), Thomson Scattering (TS), and Charge Exchange Recombination (CER) spectroscopy. These equilibria were analyzed in real-time to determine the low-n ideal MHD stability and the pedestal stability thresholds, and to obtain plasma response models. These calculations were used to understand which physical process evolves to lead to the onset of disruption in ITER-relevant scenarios at DIII-D, and how disruption can be predicted using stability analysis as opposed to the current methods of correlation of various signals, which are descriptive but lack predictive power. In the disruption studies, we focused on tearing modes, since these constitute the vast majority of disruptions in this regime. With this knowledge, real-time disruption avoidance algorithms were developed and tested. The enhanced situation awareness and physics insight were used in advanced real-time feedback control of pedestal and core profiles, which allowed the pursuit and sustainment of transient-free high-confinement regimes that cannot be achieved via feed-forward design based on in-between shot analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1998

The Effect of Solution Conditions on the Nucleation Kinetics of Tetragonal Lysozyme Crystals

An understanding of protein crystal nucleation rates and the effect of solution conditions upon them, is fundamental to the preparation of protein crystals of the desired size and shape for X-ray diffraction analysis. The ability to predict the effect of supersaturation, temperature, pH and precipitant concentration on the number and size of crystals formed is of great benefit in the pursuit of protein structure analysis. In this study we experimentally examine the effect of supersaturation, temperature, pH and sodium chloride concentration on the nucleation rate of tetragonal chicken egg white lysozyme crystals. In order to do this batch crystallization plates were prepared at given solution concentrations and incubated at three different temperatures over the period of one week. The number of crystals per well with their size and dimensions were recorded and correlated against solution conditions. Duplicate experiments indicate the reproducibility of the technique. Although it is well known that crystal numbers increase with increasing supersaturation, large changes in crystal number were also correlated against solution conditions of temperature, pH and salt concentration over the same supersaturation ranges. Analysis of these results enhance our understanding of the effect of solution conditions such as the dramatic effect that small changes in charge and ionic strength can have on the number of tetragonal lysozyme crystals that form and grow in solution.

Judge, Russell A.↗
DOE OSTI2024

Facile Synthesis of Rhodium‐Based Nanocrystals in a Metastable Phase and Evaluation of Their Thermal and Catalytic Properties

Abstract Controlling the polymorphism of metal nanocrystals is a promising strategy for enhancing properties and discovering new phenomena. However, previous studies on Rh nanocrystals have focused on their thermodynamically stable face‐centered‐cubic (fcc) phase. Herein, a facile synthesis of Rh‐based nanocrystals featuring the metastable hexagonal close‐packed (hcp) phase is reported by using Ru seeds in their native hcp phase to template the deposition of Rh atoms. The success of such phase‐controlled synthesis relies on the templating effect promoted by the small lattice mismatch between Ru and Rh and the slow dropwise titration of the precursor at an elevated temperature, ensuring the layer‐by‐layer growth mode and thus the formation of a conformal hcp‐Rh shell. Faster injection rate of Rh(III) precursor leads to the formation of a rough Rh shell in the conventional fcc phase due to accelerated reaction kinetics. Considering both thermodynamic and kinetic aspects of this system, the hcp‐Rh phase is favored when the low surface energy from smooth overlayers balances the high bulk energy of the metastable phase, achieved through tight control of reaction rates and deposition patterns. These Ru hcp @Rh hcp core–shell nanocrystals demonstrate thermal stability up to 400 °C, while exhibiting higher catalytic activity toward ethanol oxidation reaction compared to Ru hcp @Rh fcc counterparts.

Nguyen, Quynh N.↗
DOE OSTI2020

Defect Kinetics and Control for Module Reliability

Potential induced degradation is currently one of the most important module degradation mechanisms. It has been suggested that stacking faults decorated with sodium from the module glass are responsible for this effect and authors have also shown the reversibility of this effect upon reverse biasing of the module. The importance of sodium in the failure mechanism is clear, however, little is known regarding the factors that control its diffusion into the wafer, making it nearly impossible to predict the performance of a given module and engineer it to be better. Sodium migration from module glass into silicon cells and the resulting module degradation is a clear example of how defect kinetics can determine overall module performance and long-term reliability. To the detriment of the industry and its bankability, no quantitative models yet exist to predict defect-assisted module degradation, limiting the progress in improving reliability. In particular, the understanding of defect behavior under high electric fields, under stresses imparted by encapsulation or temperature, and under real operating conditions over long periods of time is a crucial gap in the current state-of-the-art. In this work we developed a Defect-Device-Degradation model to predict defect behavior and its impact on device performance over the module operational lifetime using experimentally-determined defect parameterizations. The validated model will provide a platform for manufacturing process optimization across input materials and architectures to avoid deleterious defects upstream and enable enhanced module robustness.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Towards the first plasma-electron screening experiment

The enhancement of fusion reaction rates in a thermonuclear plasma by electron screening of the Coulomb barrier is an important plasma-nuclear effect that is present in stellar models but has not been experimentally observed. Experiments using inertial confinement fusion (ICF) implosions may provide a unique opportunity to observe this important plasma-nuclear effect. Herein, we show that experiments at the National Ignition Facility (NIF) have reached the relevant physical regime, with respect to the density and temperature conditions, but the estimated impacts of plasma screening on nuclear reaction rates are currently too small and need to be increased to lower the expected measurement uncertainty. Detailed radiation hydrodynamics simulations show that practical target changes, like adding readily available high-Z gases, and significantly slowing the inflight implosion velocity, while maintaining inflight kinetic energy, might be able to push these conditions to those where plasma screening effects may be measurable. We also perform synthetic data exercises to help understand where the anticipated experimental uncertainties will become important. But challenges remain, such as the detectability of the reaction products, non-thermal plasma effects, species separation, and impacts of spatial and temporal gradients. This work lays the foundation for future efforts to develop an important platform capable of the first plasma electron screening observation.

inertial confinement fusion↗
DOE OSTI2020

Amorphous Pd-Loaded Ti 4 O 7 Electrode for Direct Anodic Destruction of Perfluorooctanoic Acid

In this work we present a novel Ti 4 O 7 -based electrode loaded with amorphous Pd clusters that achieve efficient anodic destruction of perfluorooctanoic acid (PFOA), a persistent water pollutant with significant environmental and human health concerns. These amorphous Pd clusters were characterized by the disordered, noncrystalline arrangement of Pd single atoms in close proximity, in contrast to crystalline Pd nanoparticles that have been often employed to tailor the electronic properties of an electrode. We found that the Ti 4 O 7 electrode loaded with amorphous Pd clusters significantly outperformed the Ti 4 O 7 electrode loaded with crystalline Pd particles due to enhanced electron transfer through dominant Pd–O bonds. Combined with the efficient binding of PFOA and its degradation intermediates to the fluorinated electrode surface, this electrode was capable of mineralizing PFOA and releasing fluoride as F – . The reaction pathway was found to proceed without involving reactive oxygen species and therefore was not quenched by common anions in complex natural water systems such as chloride ions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Novel effects of grain size and ion implantation on grain boundary segregation in ion irradiated austenitic steel

Nuclear reactor environments are extreme in nature due to the combination of exposure to corrosive coolant, mechanical stresses, and neutron irradiation damage. This combination of environments can lead to irradiation induced/assisted precipitation, segregation, and embrittlement coupled with enhanced creep and stress corrosion cracking. While nanostructured materials are of interest in a variety of applications due to their unique properties including high mechanical strength, for nuclear applications nanostructured materials have the added benefit of irradiation resistance due to the high volume density of sinks for irradiation-induced defects. In this study, we show unique radiation-induced segregation (RIS) behavior in nanocrystalline 304 stainless steel (SS304). Typical RIS in austenitic steels includes Ni enrichment and Cr depletion within the grain boundaries. In nanostructured SS304 this RIS is reduced. Furthermore, interestingly, some grain boundaries in the nanocrystalline SS304 in this study were found to be enriched in Cr after Fe 2+ ion irradiation at 500 °C up to 50 displacements per atom (dpa). To understand this unique observation, lattice-based atomic kinetic Monte Carlo simulations were performed to investigate the effects of grain size, thermal segregation, as well as injected interstitials (introduced as Fe self-ions). The results indicate that the Cr enrichment at grain boundaries may be caused by combined effects of grain size, self-ion injection and preferential Cr diffusion via the interstitial mechanism. In conclusion, the findings also suggest a possible difference in RIS between ion and neutron irradiations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Role of edge-localized neoclassical tearing modes in quiescent H-mode plasmas in the DIII-D tokamak

The edge-harmonic oscillations (EHOs) in standard quiescent H-mode (QH-mode) plasmas in DIII-D are consistent with edge-localized neoclassical tearing modes (NTMs) based on nonlinear two-fluid MHD simulations. Using kinetic equilibria constrained by edge profile measurements, the MHD simulations show that the n = 1 NTM and its harmonics can be destabilized at the pedestal top of QH-mode plasma by the edge bootstrap current. The simulations further show that the unstable NTMs can saturate either at small (<2% ψ N ) or large (>4% ψ N ) island width depending on the magnitude of the edge bootstrap current, where ψ N is the normalized radius in poloidal flux. The onset of the EHO also results in a prompt decrease in the pedestal width and height, consistent with simulation results for the onset of the NTM at the top of the QH-mode pedestal. This suggests that the avoidance of edge-localized modes (ELMs) in QH-mode can be attributed to the enhanced local transport induced by the NTM that is sufficient to prevent the expansion of the pedestal to an unstable width, analogous to the mechanism explored for ELM suppression by resonant magnetic perturbations. Nonlinear MHD simulations scanning the E × B frequency and the ratio of parallel and perpendicular thermal diffusivity (χ | /χ ⊥ ) at the pedestal top show that edge-localized NTMs are destabilized for conditions of high E × B frequency, high pedestal temperature, and low pedestal density, qualitatively consistent with experimental conditions required for observing the EHO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Artificial correlation heating in PIC simulations

The Particle-in-Cell (PIC) method, a cornerstone in plasma modeling, is widely employed for its ability to simulate kinetic phenomena in device-scale domains. Part of what makes this possible is that computational macroparticles represent many physical particles. It converges under certain constraints, including a grid spacing that resolves the Debye length and a time step small enough to respect the Courant–Friedrichs–Lewy condition and plasma frequency stability limit. Here, we introduce a new constraint necessary to avoid Artificial Correlation Heating (ACH). This requires that the macroparticle coupling strength be smaller than one, Γ ω < 1, where Γ ω ≡ Γω 2/3 ⁠, Γ = Z 2 e 2 /(4πε 0 ak B T) is the physical coupling strength, and w is the macroparticle weight. This is particularly relevant to 3D simulations of dense plasmas, which are becoming common with modern computing power. If this condition is violated, the finite macroparticle weight artificially enhances the coupling strength and causes the plasma to heat until the macroparticle coupling strength is near unity, depending on the grid resolution. A comprehensive model of ACH is developed that incorporates electron density, temperature, macroparticle weight, and grid resolution. It is then tested using PIC simulations, delineating the boundaries of the method's applicability and offering a predictive framework for ACH. Moreover, the research explores a runaway heating process induced by ACH in the presence of ionization, which can lead to numerical instability. A conclusion of this study is that the onset of ACH can impose a more stringent constraint on the macroparticle weight and average number of macroparticles per cell than what is typically expected, particularly in 3D simulations of dense plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Physiological, genomic, and sulfur isotopic characterization of methanol metabolism by Desulfovibrio carbinolicus

Methanol is often considered as a non-competitive substrate for methanogenic archaea, but an increasing number of sulfate-reducing microorganisms (SRMs) have been reported to be capable of respiring with methanol as an electron donor. A better understanding of the fate of methanol in natural or artificial anaerobic systems thus requires knowledge of the methanol dissimilation by SRMs. In this study, we describe the growth kinetics and sulfur isotope effects of Desulfovibrio carbinolicus, a methanol-oxidizing sulfate-reducing deltaproteobacterium, together with its genome sequence and annotation. D. carbinolicus can grow with a series of alcohols from methanol to butanol. Compared to longer-chain alcohols, however, specific growth and respiration rates decrease by several fold with methanol as an electron donor. Larger sulfur isotope fractionation accompanies slowed growth kinetics, indicating low chemical potential at terminal reductive steps of respiration. In a medium containing both ethanol and methanol, D. carbinolicus does not consume methanol even after the cessation of growth on ethanol. Among the two known methanol dissimilatory systems, the genome of D. carbinolicus contains the genes coding for alcohol dehydrogenase but lacks enzymes analogous to methanol methyltransferase. We analyzed the genomes of 52 additional species of sulfate-reducing bacteria that have been tested for methanol oxidation. There is no apparent relationship between phylogeny and methanol metabolizing capacity, but most gram-negative methanol oxidizers grow poorly, and none carry homologs for methyltransferase (mtaB). Although the amount of available data is limited, it is notable that more than half of the known gram-positive methanol oxidizers have both enzymatic systems, showing enhanced growth relative to the SRMs containing only alcohol dehydrogenase genes. Thus, physiological, genomic, and sulfur isotopic results suggest that D. carbinolicus and close relatives have the ability to metabolize methanol but likely play a limited role in methanol degradation in most natural environments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Fingerprinting Interactions between Proteins and Ligands for Facilitating Machine Learning in Drug Discovery

Molecular recognition is fundamental in biology, underpinning intricate processes through specific protein–ligand interactions. This understanding is pivotal in drug discovery, yet traditional experimental methods face limitations in exploring the vast chemical space. Computational approaches, notably quantitative structure–activity/property relationship analysis, have gained prominence. Molecular fingerprints encode molecular structures and serve as property profiles, which are essential in drug discovery. While two-dimensional (2D) fingerprints are commonly used, three-dimensional (3D) structural interaction fingerprints offer enhanced structural features specific to target proteins. Machine learning models trained on interaction fingerprints enable precise binding prediction. Recent focus has shifted to structure-based predictive modeling, with machine-learning scoring functions excelling due to feature engineering guided by key interactions. Notably, 3D interaction fingerprints are gaining ground due to their robustness. Various structural interaction fingerprints have been developed and used in drug discovery, each with unique capabilities. This review recapitulates the developed structural interaction fingerprints and provides two case studies to illustrate the power of interaction fingerprint-driven machine learning. The first elucidates structure–activity relationships in β2 adrenoceptor ligands, demonstrating the ability to differentiate agonists and antagonists. The second employs a retrosynthesis-based pre-trained molecular representation to predict protein–ligand dissociation rates, offering insights into binding kinetics. Despite remarkable progress, challenges persist in interpreting complex machine learning models built on 3D fingerprints, emphasizing the need for strategies to make predictions interpretable. Binding site plasticity and induced fit effects pose additional complexities. Interaction fingerprints are promising but require continued research to harness their full potential.

3D structural interaction fingerprints↗
NASA NTRS2002

Flowfield Comparisons from Three Navier-Stokes Solvers for an Axisymmetric Separate Flow Jet

To meet new noise reduction goals, many concepts to enhance mixing in the exhaust jets of turbofan engines are being studied. Accurate steady state flowfield predictions from state-of-the-art computational fluid dynamics (CFD) solvers are needed as input to the latest noise prediction codes. The main intent of this paper was to ascertain that similar Navier-Stokes solvers run at different sites would yield comparable results for an axisymmetric two-stream nozzle case. Predictions from the WIND and the NPARC codes are compared to previously reported experimental data and results from the CRAFT Navier-Stokes solver. Similar k-epsilon turbulence models were employed in each solver, and identical computational grids were used. Agreement between experimental data and predictions from each code was generally good for mean values. All three codes underpredict the maximum value of turbulent kinetic energy. The predicted locations of the maximum turbulent kinetic energy were farther downstream than seen in the data. A grid study was conducted using the WIND code, and comments about convergence criteria and grid requirements for CFD solutions to be used as input for noise prediction computations are given. Additionally, noise predictions from the MGBK code, using the CFD results from the CRAFT code, NPARC, and WIND as input are compared to data.

Koch, L. Danielle↗