Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Effects of ion beam heating on Raman spectra of single-walled carbon nanotubes

Free standing films of single-wall carbon nanotubes were irradiated with energetic N{sup +} and C{sup 4+} ions. The observed changes in the Raman line shape of the radial breathing mode and the G band of the C{sup 4+} irradiated samples were similar to those found for a thermally annealed sample. We ascribe these changes to thermal desorption of volatile dopants from the initially doped nanotubes. A simple geometry of the experiment allows us to estimate the temperature rise by one-dimensional heat conductance equation. The calculation indicates that irradiation-mediated increase in temperature may account for the observed Raman spectra changes.

36 MATERIALS SCIENCE↗

Electron-Stimulated Reactions and O-2 Production in Methanol-Covered Amorphous Solid Water Films

The low-energy, electron-stimulated desorption (ESD) of molecular products from amorphous solid water (ASW) films capped with methanol is investigated versus methanol coverage (0 - 4 x 1015 cm-2) at 50 K using 100 eV incident electrons. The major ESD products from a monolayer of methanol on ASW are quite similar to the ESD products from bulk methanol film: H2, CH4, H2O, C2H6, CO, CH2O, and CH3OH. For 40 ML ASW films, the molecular oxygen, hydrogen, and water ESD yields from the ASW are suppressed with increasing methanol coverage, while the CH3OH ESD yield increases proportionally to the methanol coverage. The suppression of the water ESD products by methanol is consistent with the non-thermal reactions occurring preferentially at or near the ASW/vacuum interface and not in the interior of the film. The water and molecular hydrogen ESD yields from the water layer decrease exponentially with the methanol cap coverage with 1/e constants of ~ 0.6 x 1015 cm-2 and 1.6 x 1015 cm-2, respectively. In contrast, the O2 ESD from the water layer is very efficiently quenched by small amounts of methanol (1/e ~ 6.5 x 1013 cm-2). The rapid suppression of O2 production by small amounts of methanol is due to reactions between CH3OH and the precursors for the O2 - mainly OH radicals. A kinetic model for the O2 ESD which semi-quantitatively accounts for the observations is presented.

08 HYDROGEN↗

Non-IPR C{sub 60} solids

Films comprising predominantly novel isomers of C{sub 60} [=C{sub 60}(nIPR)] have been generated by low energy ion beam deposition of vibronically excited C{sub 60}{sup +} onto graphite followed by selective sublimation of C{sub 60}(I{sub h}) from the deposited isomer mixture. The incident ions were generated by electron impact ionization/fragmentation of sublimed C{sub 70}. Images of the C{sub 60}(nIPR) films obtained by applying atomic force microscopy show aggregates, which we attribute to covalently interlinked C{sub 60}(nIPR) units. The covalent bonds are inferred from the significantly higher thermal stability of the C{sub 60}(nIPR) films compared to the C{sub 60}(I{sub h}) van der Waals solid-as measured by thermal desorption with mass spectrometric detection of the C{sub 60} mass channel (the only desorbable species). In contrast to the characteristic doublet structure of the occupied valence band in the ultraviolet photoelectron spectrum of pure C{sub 60}(I{sub h}), the valence band of C{sub 60}(nIPR) films exhibits a triplet feature with the additional peak occurring at a binding energy of {approx}2.6 eV. This is an indicator of the electronic modifications induced by intermolecular bonding. C{sub 60}(nIPR) films exhibit a narrower band gap than found for C{sub 60}(I{sub h}). They also have significantly different chemical reactivity toward incorporation of thermal energy deuterium atoms. In order to model the experimental photoelectron spectra, various covalently linked oligomers of {sup 1809}C{sub 60}(C{sub 2v}), the second most stable conventional 60-atom fullerene cage, were calculated by means of the density functional theory. These spectral predictions together with analogous previous observations on related fullerene solids such as C{sub 58} lead us to infer that C{sub 60}(nIPR) films consist of fullerene cage isomers containing one or more adjacent pentagon pairs, which mediate covalent cage-cage interconnection.

36 MATERIALS SCIENCE↗

Photoinduced conductivity in tin dioxide thin films

The effects of ultraviolet light irradiation on the conducting properties of SnO{sub 2-x} thin films grown epitaxially on TiO{sub 2} or Al{sub 2}O{sub 3} single-crystal substrates are studied at room temperature. A large increase in conductivity by two to four orders of magnitude is observed with light irradiation in an inert atmosphere and remains after the light is removed. The high-conducting state reverts to the original low-conducting state by exposing it to oxygen gas. These reversible phenomena are ascribed to the desorption and adsorption of negatively charged oxygen species at the grain boundaries, which critically change the mobility of electron carriers already present inside grains by changing the potential barrier height at the grain boundary. The UV light irradiation provides us with an easy and useful route to achieve a high-conducting state even at low carrier density in transparent conducting oxides and also to draw an invisible conducting wire or a specific pattern on an insulating film.

36 MATERIALS SCIENCE↗

Synthesis Properties and Electron Spin Resonance Properties of Titanic Materials

Titanic materials were synthesized by hydrothermal method of TiO{sub 2} anatase in 10M LiOH, 10M NaOH, and 14M KOH at 130 deg. C for 30 hours. Alkaline media were removed from the synthesized products using 0.1N HCl aqueous solution. The as-prepared samples were characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, Brunauer-Emmett-Teller isotherm, and electron spin resonance. Different shapes of synthesized products were observed through the typical electron microscope and indicated that the formation of the different morphologies depends on the treatment conditions of highly alkaline media. Many micropores were observed in the cubic or octahedral type of TiO{sub 2} samples through the typical electron microscope and Langmuir adsorption-desorption isotherm of liquid nitrogen at 77 deg. K. Electron spin resonance studies have also been carried out to verify the existence of paramagnetic sites such as oxygen vacancies on the titania samples. The effect of alkali metal ions on the morphologies and physicochemical properties of nanoscale titania are discussed.

36 MATERIALS SCIENCE↗

Effect of Cu contamination on recombination of O atoms on a plasma-oxidized silicon surface

In the dual damascene microelectronics integration scheme during the last stage of plasma etching of dielectrics down to underlying Cu layers, Cu is sputtered onto the reactor walls and is believed to cause a drift in etching rates. For photoresist etching in an O{sub 2}-containing plasma, a drop in etching rate suggests that Cu could cause a decrease in the O-atom concentration in the plasma, due perhaps to an increase in the O recombination rate on the chamber walls. We therefore studied the effects of traces of Cu on O recombination on an oxygen plasma-conditioned surface, using the spinning wall technique. With this method, a cylindrical substrate, here coated in situ with sputter-deposited Si and then oxidized in an O{sub 2} plasma, is rotated past skimmers, allowing the surface to be periodically exposed to the plasma and an Auger electron spectrometer with a pressure gauge in a differentially pumped chamber. Between plasma exposures, the sample could also be dosed with Cu from an evaporation source in a differentially pumped chamber. With no Cu on the surface, a pressure rise was observed in the Auger chamber, due to desorption of recombined O{sub 2}. These measurements were used to derive a Langmuir-Hinshelwood recombination coefficient of gamma{sub O}=0.043 for the steady-state oxidized Si, Cu-free surface. The surface was then coated with a small fraction of a monolayer (roughly approx0.002 monolayers of Cu with a dose of approx1.4x10{sup 13} cm{sup -2} and an assumed sticking coefficient of 0.3) and gamma{sub O} was found to increase to 0.069. Further dosing with Cu did not produce any further increases in gamma{sub O}. The initial low gamma{sub O} value could not be recovered by coating the surface with sputter Si, apparently due to rapid outdiffusion of Cu through Si at room temperature. Cu catalyzed recombination of O is ascribed to a redox cycling between Cu{sup +} and Cu{sup 2+} oxidation states.

36 MATERIALS SCIENCE↗

Transient atomic behavior and surface kinetics of GaN

An in-depth model for the transient behavior of metal atoms adsorbed on the surface of GaN is developed. This model is developed by qualitatively analyzing transient reflection high energy electron diffraction (RHEED) signals, which were recorded for a variety of growth conditions of GaN grown by molecular-beam epitaxy (MBE) using metal-modulated epitaxy (MME). Details such as the initial desorption of a nitrogen adlayer and the formation of the Ga monolayer, bilayer, and droplets are monitored using RHEED and related to Ga flux and shutter cycles. The suggested model increases the understanding of the surface kinetics of GaN, provides an indirect method of monitoring the kinetic evolution of these surfaces, and introduces a novel method of in situ growth rate determination.

36 MATERIALS SCIENCE↗

Field Air Sampling and Simultaneous Chemical and Sensory Analysis of Livestock Odorants with Sorbent Tube GC-MS/Olfactometry

Characterization and quantification of livestock odorants is one of the most challenging analytical tasks because odor-causing gases are very reactive, polar and often present at very low concentrations in a complex matrix of less important or irrelevant gases. The objective of this research was to develop a novel analytical method for characterization of the livestock odorants including their odor character, odor intensity, and hedonic tone and to apply this method for quantitative analysis of the key odorants responsible for livestock odor. Sorbent tubes packed with Tenax TA were used for field sampling. The automated one-step thermal desorption module coupled with multidimensional gas chromatography-mass spectrometry/olfactometry system was used for simultaneous chemical and odor analysis. Fifteen odorous VOCs and semi-VOCs identified from different livestock species operations were quantified. Method detection limits ranges from 40 pg for skatole to 3590 pg for acetic acid. In addition, odor character, odor intensity and hedonic tone associated with each of the target odorants are also analyzed simultaneously. We found that the mass of each VOCs in the sample correlates well with the log stimulus intensity. All of the correlation coefficients (R{sup 2}) are greater than 0.74, and the top 10 correlation coefficients were greater than 0.90.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design Of A Sorbent/desorbent Unit For Sample Pre-treatment Optimized For QMB Gas Sensors

Sample pre-treatment is a typical procedure in analytical chemistry aimed at improving the performance of analytical systems. In case of gas sensors sample pre-treatment systems are devised to overcome sensors limitations in terms of selectivity and sensitivity. For this purpose, systems based on adsorption and desorption processes driven by temperature conditioning have been illustrated. The involvement of large temperature ranges may pose problems when QMB gas sensors are used. In this work a study of such influences on the overall sensing properties of QMB sensors are illustrated. The results allowed the design of a pre-treatment unit coupled with a QMB gas sensors array optimized to operate in a suitable temperatures range. The performance of the system are illustrated by the partially separation of water vapor in a gas mixture, and by substantial improvement of the signal to noise ratio.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular beam epitaxy of SrTiO{sub 3} with a growth window

Many complex oxides with only nonvolatile constituents do not have a wide growth window in conventional molecular beam epitaxy (MBE) approaches, which makes it difficult to obtain stoichiometric films. Here it is shown that a growth window in which the stoichiometry is self-regulating can be achieved for SrTiO{sub 3} films by using a hybrid MBE approach that uses a volatile metal-organic source for Ti, titanium tetra isopropoxide (TTIP). The growth window widens and shifts to higher TTIP/Sr flux ratios with increasing temperature, showing that it is related to the desorption of the volatile TTIP. We demonstrate stoichiometric, highly perfect, insulating SrTiO{sub 3} films. The approach can be adapted for the growth of other complex oxides that previously were believed to have no wide MBE growth window.

36 MATERIALS SCIENCE↗

Formation mechanisms of oxygen atoms in the O({sup 3}P{sub J}) state from the 157 nm photoirradiation of amorphous water ice at 90 K

Desorption of ground state O({sup 3}P{sub J=2,1,0}) atoms following the vacuum ultraviolet photolysis of water ice in the first absorption band was directly measured with resonance-enhanced multiphoton ionization (REMPI) method. Based on their translational energy distributions and evolution behavior, two different formation mechanisms are proposed: One is exothermic recombination reaction of OH radicals, OH+OH{yields}H{sub 2}O+O({sup 3}P{sub J}) and the other is the photodissociation of OH radicals on the surface of amorphous solid water. The translational and internal energy distributions of OH radicals as well as the evolution behavior were also measured by REMPI to elucidate the roles of H{sub 2}O{sub 2} and OH in the O({sup 3}P{sub J}) formation mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation mechanisms of oxygen atoms in the O({sup 1}D{sub 2}) state from the 157 nm photoirradiation of amorphous water ice at 90 K

Vacuum ultraviolet photolysis of water ice in the first absorption band was studied at 157 nm. Translational and internal energy distributions of the desorbed species, O({sup 1}D) and OH(v=0,1), were directly measured with resonance-enhanced multiphoton ionization method. Two different mechanisms are discussed for desorption of electronically excited O({sup 1}D) atoms from the ice surface. One is unimolecular dissociation of H{sub 2}O to H{sub 2}+O({sup 1}D) as a primary photoprocess. The other is the surface recombination reaction of hot OH radicals that are produced from photodissociation of hydrogen peroxide as a secondary photoprocess. H{sub 2}O{sub 2} is one of the major photoproducts in the vacuum ultraviolet photolysis of water ice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature enhancement of secondary electron emission from hydrogenated diamond films

The effect of temperature on the stability of the secondary electron emission (SEE) yield from approx100-nm-thick continuous diamond films is reported. At room temperature, the SEE yield was found to decay as a function of electron irradiation dose. The SEE yield is observed to increase significantly upon heating of the diamond surface. Furthermore, by employing moderate temperatures, the decay of the SEE yield observed at room temperature is inhibited, showing a nearly constant yield with electron dose at 200 deg. C. The results are explained in terms of the temperature dependence of the electron beam-induced hydrogen desorption from the diamond surface and surface band bending. These findings demonstrate that the longevity of diamond films in practical applications of SEE can be increased by moderate heating.

36 MATERIALS SCIENCE↗

Remote plasma treatment of Si surfaces: Enhanced nucleation in low-temperature chemical vapor deposition

The nucleation density on Si(100):H is increased by two orders of magnitude after exposing the surface to a remote argon plasma. We study HfB{sub 2} growth from Hf(BH{sub 4}){sub 4} and MgO growth from Mg(DMDBA){sub 2} plus H{sub 2}O. In the latter case, pretreatment allows the growth of MgO films with an rms roughness below 0.5 nm, whereas in absence of plasma treatment no nucleation is observed. The plasma does not damage the substrate and is compatible with microelectronics technology. We propose that H desorption is the key mechanism leading to nucleation enhancement, and that remote plasma activation is likely to be generally applicable.

36 MATERIALS SCIENCE↗

Photodesorption of excited iodine atoms from KI (100)

Band-to-band photoexcitation of potassium iodide single crystals with UV photons produces thermal and hyperthermal I-atom emission in both the ground I(2P3/2) and spin orbit excited I*(2P1/2) states. Thermal halogen atom emission is preceded by H-center diffusion from bulk to surface and excited atom emission indicates that the excited hole spin state relaxation is incomplete before H-center diffusion to the surface. The hyperthermal I-atom kinetic energy distribution is inverted in the sense that the electronically excited I*(2P1/2) atoms are more energetic than the ground state I(2P3/2) atoms. The mechanism for hyperthermal emission of halogen atoms and their kinetic energy distributions is discussed in terms of recent calculations and a simple curve crossing model for the dynamical desorption process.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A growth diagram for plasma-assisted molecular beam epitaxy of GaN nanocolumns on Si(111)

The morphology of GaN samples grown by plasma-assisted molecular beam epitaxy on Si(111) was systematically studied as a function of impinging Ga/N flux ratio and growth temperature (730-850 deg. C). Two different growth regimes were identified: compact and nanocolumnar. A growth diagram was established as a function of growth parameters, exhibiting the transition between growth regimes, and showing under which growth conditions GaN cannot be grown due to thermal decomposition and Ga desorption. Present results indicate that adatoms diffusion length and the actual Ga/N ratio on the growing surface are key factors to achieve nanocolumnar growth.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of multipactor conditioning on technical electrode surfaces

Historically, multipactor conditioning has been utilized to remove surface contaminants from rf electrodes by electron-stimulated gas desorption, and such conditioning has been shown to reduce multipactor susceptibility. Multipactor threshold improvements are due to increasing E{sub 1}, the minimum energy for the secondary electron coefficient, {delta}>1, such that resonant electrons are incapable of producing discharge-sustaining secondary emission. Using an rf amplitude sweep technique, the evolution of the multipactor threshold is measured as a function of multipactor conditioning time for a series of technical electrode surfaces. Results show over +3 dB of threshold improvement in copper and gold electrodes, while the aluminum threshold actually decreases with conditioning exposure. Additionally, these conditioning results indicate the possible voltage region for transient-mode multipaction (TMM), which can cause significant risk to rf systems such as space satellite components for which in-situ conditioning is generally not possible. Experimental results and supporting Monte Carlo particle tracking simulation results are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of temperature on the secondary electron emission yield from single crystal and polycrystalline diamond surfaces

The effect of temperature in the 293-473 K range, on the secondary electron emission (SEE) yield of single crystal and polycrystalline diamond film surfaces is reported. For the polycrystalline films the SEE yield was found to decay as function of electron irradiation dose while for the single crystal an increase occurs first, followed by a decrease. For both surfaces, the SEE yield increases significantly upon heating and obtained a nearly constant value with electron dose at 473 K. These effects are explained as due to the temperature dependence of the electron beam induced hydrogen desorption and surface band bending.

36 MATERIALS SCIENCE↗