Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “count data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

High Spatial Resolution Studies of Epithermal Neutron Emission from the Lunar Poles: Constraints on Hydrogen Mobility

The data from the collimated sensors of the LEND instrument are shown to be of exceptionally high quality. Counting uncertainties are about 0.3% relative and are shown to be the only significant source of random error, thus conclusions based on small differences in count rates are valid. By comparison with the topography of Shoemaker crater, the spatial resolution of the instrument is shown to be consistent with the design value of 5 km for the radius of the circle over which half the counts from the lunar surface would be determined. The observed epithermal-neutron suppression factor due to the hydrogen deposit in Shoemaker crater of 0.25 plus or minus 0.04 cps is consistent with the collimated field-of-view rate of 1.7 cps estimated by Mitrofanov et al. (2010a). The statistical significance of the neutron suppressed regions (NSRs) relative to the larger surrounding polar region is demonstrated, and it is shown that they are not closely related to the permanently shadowed regions. There is a significant increase in H content in the polar regions independent of the H content of the NSRs. The non-NSR H content increases directly with latitude, and the rate of increase is virtually identical at both poles. There is little or no increase with latitude outside the polar region. Various mechanisms to explain this steep increase in the non-NSR polar H with latitude are investigated, and it is suggested that thermal volatilization is responsible for the increase because it is minimized at the low surface temperatures close to the poles.

neutron↗

Boulders on Ceres

Introduction: In December 2015 the Dawn spacecraft moved into the Low Altitude Mapping Orbit (LAMO) around Ceres, encircling the dwarf planet at a distance of 400 km to the surface below. At this altitude, images of the on-board framing camera have a resolution of 36 meters per pixel, high enough to distinguish large boulders on the surface. Indeed, LAMO images show a multitude of boulders around what seem to be fresh craters. The average life-time of boulders on Dawn's previous target, Vesta, was estimated to be similar to that of Lunar boulders, as may be expected from the basaltic surface composition. The bulk composition of Ceres may be carbonaceous chondrite-like with significant contributions of clays, salt, and water ice. As such, the abundance and distribution of boulders on Ceres may be different from that on Vesta. We mapped, counted, and measured the diameter of boulders over the entire surface of Ceres. Our analysis of the data in combination with crater age estimates may provide clues to the physical nature and composition of the surface.

Ceres↗

Synchronization of Human Autonomic Nervous System Rhythms with Geomagnetic Activity in Human Subjects

A coupling between geomagnetic activity and the human nervous system's function was identified by virtue of continuous monitoring of heart rate variability (HRV) and the time-varying geomagnetic field over a 31-day period in a group of 10 individuals who went about their normal day-to-day lives. A time series correlation analysis identified a response of the group's autonomic nervous systems to various dynamic changes in the solar, cosmic ray, and ambient magnetic field. Correlation coefficients and p values were calculated between the HRV variables and environmental measures during three distinct time periods of environmental activity. There were significant correlations between the group's HRV and solar wind speed, Kp, Ap, solar radio flux, cosmic ray counts, Schumann resonance power, and the total variations in the magnetic field. In addition, the time series data were time synchronized and normalized, after which all circadian rhythms were removed. It was found that the participants' HRV rhythms synchronized across the 31-day period at a period of approximately 2.5 days, even though all participants were in separate locations. Overall, this suggests that daily autonomic nervous system activity not only responds to changes in solar and geomagnetic activity, but is synchronized with the time-varying magnetic fields associated with geomagnetic field-line resonances and Schumann resonances.

Magnetic Fields↗

Heavy-Meson Spectrum Tests of the Oktay--Kronfeld Action

We present heavy-meson spectrum results obtained using the Oktay--Kronfeld (OK) action on MILC asqtad lattices. The OK action was designed to improve the heavy-quark action of the Fermilab formulation, such that heavy-quark discretization errors are reduced. The OK action includes dimension-6 and -7 operators necessary for tree-level matching to QCD through order $\mathrm{O}(\Lambda^3/m_Q^3)$ for heavy-light mesons and $\mathrm{O}(v^6)$ for quarkonium, or, equivalently, through $\mathrm{O}(a^2)$ with some $\mathrm{O}(a^3)$ terms with Symanzik power counting. To assess the improvement, we extend previous numerical tests with heavy-meson masses by analyzing data generated on a finer ($a \approx 0.12\;$fm) lattice with the correct tadpole factors for the $c_5$ term in the action. We update the analyses of the inconsistency parameter and the hyperfine splittings for the rest and kinetic masses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Self-timed router with virtual channel control

Systems, apparatuses, and methods for implementing an asynchronous router with virtual channel (VC) control. The asynchronous router may support multiple VCs for connections to other routers. The asynchronous router may include an interface unit on each switch boundary, with each interface unit including a data merge unit. The data merge unit may include a full detector unit for each VC, with the full detector unit counting the number of flits sent out on a respective VC and counting the number of credits released by the successor router. Whenever the successor router has no credits available, the full detector unit will assert the full signal to prevent any input requests from requesting to transmit over that particular VC. When the full signal is asserted, a timer unit may be activated to repeatedly check if any credits have been released in the successor router.

Jiang, Weiwei↗

Impact Real World System Validation

Introduction NASA has developed a new evidence-based data-driven probabilistic risk assessment and tradespace analysis tool as a successor to the Integrated Medical Model. This updated decision support tool is known as IMPACT (Informing Mission Planning via Analysis of Complex Tradespaces). IMPACT estimates the frequency and consequences of medical conditions that might arise during exploration missions. A validation analysis of IMPACT was performed with respect to a set of International Space Station (ISS) and Shuttle Transportation System (STS) real world system (RWS) referent data due to the limited referent data available from exploration missions. Methods Observed mission and crew characteristics from STS and ISS missions were used as model inputs within MEDPRAT (Medical Extensible Dynamic Probabilistic Risk Assessment Tool). For each mission, two hundred thousand simulations were generated. For each mission, model outputs included occurrence counts for each condition, total medical events (TME), and the probability of loss of crew life (LOCL). These simulated model outputs were compared to the RWS referent data. Results The predicted number of total medical events exceeded the total RWS medical events for ISS missions and combined ISS and STS missions and fell within the 90% confidence interval for STS missions. For the 32 ISS missions simulated by IMPACT, the number of total medical events was overpredicted for 19 missions and fell within the 90% confidence interval for 13 missions. For the 21 STS missions, the total number of medical events was overpredicted for 3 missions, fell within the 90% confidence interval for 16 missions, and was underpredicted for 2 missions. Combined, 29 missions were in range, 22 were overpredicted, and 2 were underpredicted. The predicted LOCL probability for the 32 ISS missions, the 21 STS missions, and the combined ISS and STS missions was consistent with the zero LOCL events observed in the RWS referent data. The validation analysis included a comparison of the number of medical events predicted by IMPACT and the number of medical events observed in the RWS data on a condition-by-condition basis. For ISS missions, 50 conditions were in range, 52 conditions were statistically underpowered (not enough observed sample to draw any conclusions on precision), 8 conditions were overpredicted, and 9 conditions were underpredicted. Overall, only 14% (17/119) of conditions were out of range for STS missions, 40 conditions were in range, 59 conditions were statistically underpowered, 10 conditions were overpredicted, and 10 conditions were underpredicted. Overall, only 17% (20/119) of conditions were out of range. For combined ISS and STS missions, 11 conditions were overpredicted, and 11 conditions were underpredicted. Overall, only 18% (22/119) of conditions were out of range. For combined ISS and STS missions, 49 conditions were in range, 46 conditions were statistically underpowered, 18 conditions were overpredicted, and 8 conditions were underpredicted. Overall, 21% (26/121) of conditions were out of range. Conclusion The results of this validation analysis should not be interpreted as a pass/fail test of the validity of IMPACT. Instead, this validation analysis should be used to assess some of the IMPACT outcomes in terms of consistencies and inconsistencies with the ISS and STS RWS referent data.

L. Boley↗

SU-E-QI-03: Compartment Modeling of Dynamic Brain PET - The Effect of Scatter and Random Corrections On Parameter Errors

Purpose: To investigate the effects of corrections for random and scattered coincidences on kinetic parameters in brain tumors, by using ten Monte Carlo (MC) simulated dynamic FLT-PET brain scans. Methods: The GATE MC software was used to simulate ten repetitions of a 1 hour dynamic FLT-PET scan of a voxelized head phantom. The phantom comprised six normal head tissues, plus inserted regions for blood and tumor tissue. Different time-activity-curves (TACs) for all eight tissue types were used in the simulation and were generated in Matlab using a 2-tissue model with preset parameter values (K1,k2,k3,k4,Va,Ki). The PET data was reconstructed into 28 frames by both ordered-subset expectation maximization (OSEM) and 3D filtered back-projection (3DFBP). Five image sets were reconstructed, all with normalization and different additional corrections C (A=attenuation, R=random, S=scatter): Trues (AC), trues+randoms (ARC), trues+scatters (ASC), total counts (ARSC) and total counts (AC). Corrections for randoms and scatters were based on real random and scatter sinograms that were back-projected, blurred and then forward projected and scaled to match the real counts. Weighted non-linearleast- squares fitting of TACs from the blood and tumor regions was used to obtain parameter estimates. Results: The bias was not significantly different for trues (AC), trues+randoms (ARC), trues+scatters (ASC) and total counts (ARSC) for either 3DFBP or OSEM (p<0.05). Total counts with only AC stood out however, with an up to 160% larger bias. In general, there was no difference in bias found between 3DFBP and OSEM, except in parameter Va and Ki. Conclusion: According to our results, the methodology of correcting the PET data for randoms and scatters performed well for the dynamic images where frames have much lower counts compared to static images. Generally, no bias was introduced by the corrections and their importance was emphasized since omitting them increased bias extensively.

60 APPLIED LIFE SCIENCES↗

Using Nucleon Multiplicities to Analyze Anti-Neutrino Interactions with Nuclei

The most commonly used, simple interaction models have not accurately described the nuclear effects on either neutrino-nucleus or anti-neutrino-nucleus interactions. Comparison of data collected by the MINERvA experiment and these models shows a discrepancy in the reconstructed hadronic energy distribution at momentum transfers below 0.8 GeV. Two nuclear model effects that were previously not modeled are possible culprits of this discrepancy. The first is known as random-phase-approximation and the second is the addition of a meson exchange current process, also known as two-particle two-hole due to its result in two particles leaving the nucleus with two holes left in their place. For the first time a neutron counting software algorithm has been created and used to compare the multiplicity and spatial distributions of neutrons between the simulation and data. There is localized sensitivity to the RPA and 2p2h effects and both help the simulation better describe the data. Ad ditional systematic or model effects are present which cause the simulation to overproduce neutrons, and potential causes are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

THE BLOB CONNECTION: SEARCHING FOR LOW CORONAL SIGNATURES OF SOLAR POST-CME BLOBS

Bright linear structures, thought to be indicators of a current sheet (CS), are often seen in Large Angle and Spectrometric Coronagraph (LASCO) on the Solar and Heliospheric Observatory (SOHO) white-light data in the wake of coronal mass ejections (CMEs). In a subset of these post-CME structures, relatively bright blobs are seen moving outward along the rays. These blobs have been interpreted as consequences of the plasmoid instability in the CS, and can help us to understand the dynamics of the reconnection. We examine several instances, taken largely from the SOHO /LASCO CME-rays Catalog, where these blobs are clearly visible in white-light data. Using radially filtered, difference, wavelet enhanced, and multiscale Gaussian normalized images to visually inspect Solar Dynamics Observatory /Atmospheric Imaging Assembly (AIA) data in multiple wavelengths, we look for signatures of material that correspond both temporally and spatially to the later appearance of the blobs in LASCO/C2. Constraints from measurements of the blobs allow us to predict the expected count rates in DN pixel{sup −1} s{sup −1} for each AIA channel. The resulting values would make the blobs bright enough to be detectable at 1.2 R {sub ⊙}. However, we do not see conclusive evidence for corresponding blobs in the AIA data in any of the events. We do the same calculation for the “cartwheel CME,” an event in which blobs were seen in X-rays, and find that our estimated count rates are close to those observed. We suggest several possibilities for the absence of the EUV blobs including the formation of the blob higher than the AIA field of view, blob coalescence, and overestimation of blob densities.

79 ASTRONOMY AND ASTROPHYSICS↗

QuantifyML: How good is my machine learning model?

This paper presents an approach, QuantifyML, which employs model counting to assess the learnability and robustness of machine learning models. Typically the efficacy of machine learning models is determined by computing their accuracy statistically on test data sets. However, this may be misleading, if the test data is not representative of the problem that is being studied. Further, two different models may have the same accuracy on a given data set, measured statistically, but may be very different in their behavior on unseen data. Also, models with high accuracy could have poor adversarial robustness. In QuantifyML, our goal is to precisely quantify the extent to which machine learning models have learned and generalized from the given data. In QuantifyML, a trained model is translated into a C program, which is fed to the CBMC model checking tool to produce a formula in Conjunctive Normal Form (CNF), which in turn is analyzed with state-of-the-art model counters to efficiently obtain precise counts w.r.t different outputs. QuantifyML enables i) evaluating the learnability of models by comparing the counts for the outputs to ground truth, expressed as logical predicates (if available), ii) comparing the performance of different models that may be built with different machine learning algorithms (e.g., decision-trees vs. neural networks), and iii) quantifying the robustness of trained models around given inputs. Our evaluation demonstrates these applications of QuantifyML on decision trees and neural networks trained to learn relational properties of graphs, for which we know the ground truth, and to perform image classification, for which we do not have the ground truth, but we can quantify local robustness.

Deep Neural Networks↗

The SRG/eROSITA All-Sky Survey: Constraints on ultralight axion dark matter through galaxy cluster number counts

Ultralight axions are hypothetical scalar particles that influence the evolution of large-scale structures of the Universe. Depending on their mass, they can potentially be part of the dark matter component of the Universe as candidates commonly referred to as fuzzy dark matter. While strong constraints have been established for pure fuzzy dark matter models, the more general scenario where ultralight axions constitute only a fraction of the dark matter has been limited to only a few observational probes. In this work, we use the galaxy cluster number counts obtained from the first All-Sky Survey (eRASS1) of the SRG/eROSITA mission together with gravitational weak lensing data from the Dark Energy Survey, the Kilo-Degree Survey, and the Hyper Suprime-Cam to constrain the fraction of ultralight axions in the mass range 10 −32 eV to 10 −24 eV. We put upper bounds on the ultralight axion relic density Ω a in independent logarithmic axion mass bins by performing a full cosmological parameter inference. We find an exclusion region in the intermediate ultralight axion mass regime with the tightest bounds reported so far in the mass bins around m a = 10 −27 eV with Ω a < 0.0035 and m a = 10 −26 eV with Ω a < 0.0079; both are at a 95% confidence level. When combined with cosmic microwave background probes, these bounds are tightened to Ω a < 0.0030 in the m a = 10 −27 eV mass bin and Ω a < 0.0058 in the m a = 10 −26 eV mass bin, with both at a 95% confidence level. This is the first time that constraints on ultralight axions have been obtained using the growth of structure measured by galaxy cluster number counts. These results pave the way for large surveys, which can be utilized to obtain tight constraints on the mass and relic density of ultralight axions with better theoretical modeling of the abundance of halos.

cosmological parameters↗

ALMACAL I: FIRST DUAL-BAND NUMBER COUNTS FROM A DEEP AND WIDE ALMA SUBMILLIMETER SURVEY, FREE FROM COSMIC VARIANCE

We have exploited ALMA calibration observations to carry out a novel, wide, and deep submillimeter (submm) survey, almacal. These calibration data comprise a large number of observations of calibrator fields in a variety of frequency bands and array configurations. By gathering together data acquired during multiple visits to many ALMA calibrators, it is possible to reach noise levels which allow the detection of faint, dusty, star-forming galaxies (DSFGs) over a significant area. In this paper, we outline our survey strategy and report the first results. We have analyzed data for 69 calibrators, reaching depths of ∼25 μ Jy beam{sup −1} at sub-arcsec resolution. Adopting a conservative approach based on ≥5 σ detections, we have found 8 and 11 DSFGs in ALMA bands 6 and 7, respectively, with flux densities S {sub 1.2} m {sub m} ≥ 0.2 mJy. The faintest galaxies would have been missed by even the deepest Herschel surveys. Our cumulative number counts have been determined independently at 870 μ m and 1.2 mm from a sparse sampling of the astronomical sky, and are thus relatively free of cosmic variance. The counts are lower than reported previously by a factor of at least 2×. Future analyses will yield large, secure samples of DSFGs with redshifts determined via the detection of submm spectral lines. Uniquely, our strategy then allows for morphological studies of very faint DSFGs—representative of more normal star-forming galaxies than conventional submm galaxies—in fields where self-calibration is feasible, yielding milliarcsecond spatial resolution.

79 ASTRONOMY AND ASTROPHYSICS↗

Neutron counting and gamma spectroscopy with PVT detectors.

Radiation portals normally incorporate a dedicated neutron counter and a gamma-ray detector with at least some spectroscopic capability. This paper describes the design and presents characterization data for a detection system called PVT-NG, which uses large polyvinyl toluene (PVT) detectors to monitor both types of radiation. The detector material is surrounded by polyvinyl chloride (PVC), which emits high-energy gamma rays following neutron capture reactions. Assessments based on high-energy gamma rays are well suited for the detection of neutron sources, particularly in border security applications, because few isotopes in the normal stream of commerce have significant gamma ray yields above 3 MeV. Therefore, an increased count rate for high-energy gamma rays is a strong indicator for the presence of a neutron source. The sensitivity of the PVT-NG sensor to bare {sup 252}Cf is 1.9 counts per second per nanogram (cps/ng) and the sensitivity for {sup 252}Cf surrounded by 2.5 cm of polyethylene is 2.3 cps/ng. The PVT-NG sensor is a proof-of-principal sensor that was not fully optimized. The neutron detector sensitivity could be improved, for instance, by using additional moderator. The PVT-NG detectors and associated electronics are designed to provide improved resolution, gain stability, and performance at high-count rates relative to PVT detectors in typical radiation portals. As well as addressing the needs for neutron detection, these characteristics are also desirable for analysis of the gamma-ray spectra. Accurate isotope identification results were obtained despite the common impression that the absence of photopeaks makes data collected by PVT detectors unsuitable for spectroscopic analysis. The PVT detectors in the PVT-NG unit are used for both gamma-ray and neutron detection, so the sensitive volume exceeds the volume of the detection elements in portals that use dedicated components to detect each type of radiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

RFe{sub 2}Mg{sub x}Al{sub 8−x} (R=La–Nd and Sm; x≈0.8): Flux synthesis, structure, magnetic and electrical properties

Single crystals of Mg-substituted CeFe{sub 2}Al{sub 8} type intermetallics RFe{sub 2}Mg{sub x}Al{sub 8–x} (R=La–Nd and Sm; x≤1) were grown by reacting iron and rare earth metals in 1:1 Mg/Al mixed flux. The structure features mono-capped and bi-capped trigonal prismatic FeAl{sub 6} units. Electronic structure calculations indicate that magnesium substitution reduces the valence electron count, shifting the Fermi level away from a pseudo-gap. This changes the electronic nature of the cerium analog; the previously reported ternary CeFe{sub 2}Al{sub 8} shows strong hybridization between the cerium states and the conduction electrons, resulting in no magnetic moment on Ce atoms. On the other hand, magnetic susceptibility measurements on CeFe{sub 2}Mg{sub x}Al{sub 8–x} indicates a localized moment on cerium. The newly synthesized Pr, Nd and Sm analogs exhibit antiferromagnetic ordering at 2.8 K, 7.8 K and 12 K respectively. Solid state {sup 27}Al NMR of LaFe{sub 2}Mg{sub x}Al{sub 8–x} exhibits a broad Knight shift at ~1200 ppm, consistent with the metallic behavior shown by electrical resistivity data. - Graphical abstract: Mg substitution into CeFe{sub 2}Al{sub 8} modifies cerium valence due to changing valence electron count. - Highlights: • RFe{sub 2}Mg{sub x}Al{sub 8−x} (R=La–Nd, Sm) grow as large crystals from reactions in Mg/Al flux. • Products are magnesium-substituted variants of CeFe{sub 2}Al{sub 8}, with CaCo{sub 2}Al{sub 8} structure. • Ce magnetic moment in CeFe{sub 2}Mg{sub x}Al{sub 8−x} varies from that in CeFe{sub 2}Al{sub 8} due to VEC change. • Antiferromagnetic ordering observed for Pr, Nd, Sm analogs of RFe{sub 2}Mg{sub x}Al{sub 8−x}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dilaton EFT framework for lattice data

We develop an effective-field-theory (EFT) framework to analyze the spectra emerging from lattice simulations of a large class of confining gauge theories. Simulations of these theories, for which the light-fermion count is not far below the critical value for transition to infrared conformal behavior, have indicated the presence of a remarkably light singlet scalar particle. We incorporate this particle by including a scalar field in the EFT along with the Nambu-Goldstone bosons (NGB’s), and discuss the application of this EFT to lattice data. We highlight the feature that data on the NGB’s alone can tightly restrict the form of the scalar interactions. As an example, we apply the framework to lattice data for an SU(3) gauge theory with eight fermion flavors, concluding that the EFT can describe the data well.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ground truth crop proportion summaries for US segments, 1976-1979

The original ground truth data was collected, digitized, and registered to LANDSAT data for use in the LACIE and AgRISTARS projects. The numerous ground truth categories were consolidated into fewer classes of crops or crop conditions and counted occurrences of these classes for each segment. Tables are presented in which the individual entries are the percentage of total segment area assigned to a given class. The ground truth summaries were prepared from a 20% sample of the scene. An analysis indicates that this size of sample provides sufficient accuracy for use of the data in initial segment screening.

Horvath, R.↗

Using Beta Cen to Probe the Photosphere-wind Connection in B Stars

In this project we began by identifying the large number of emission lines visible in the XMM-Newton RGS spectra of Beta Cen. A comprehensive analysis of the temperature structure of the hot gas was carried out by simultaneously fitting the data from all the instruments on the spacecraft. This resulted in a measured temperature range of 0.1-0.6 keV. In more detailed analysis, three characteristic plasma temperatures were found: 0.1, 0.2, and 0.6 keV. The research carried out at UW-Eau Claire primarily focused on two aspects of the data: the analysis of the forbidden line to intercombination line ratio for He-like ions and the time variability of the overall X-ray flux as detected in the direct X-ray images of the star. The analysis of the lines from He-like ions indicate that the Ne IX lines are formed no farther than about 4 stellar radii from the star's photosphere, while the N VI lines are formed within 11 stellar radii of the photosphere. X-ray flux variability would be particularly interesting for this star because it is a known Beta Cep-type variable as seen in optical light: similar variation in the X-ray region would forge an interesting link between the two wavebands. Initial analysis of the X-ray flux was complicated by spikes in the count rates early in the observation. Detailed analysis of the spectral characteristics these count rate anomalies indicated that these flares were probably not intrinsic to the star, rather they were contaminations of the data due to the passage of the satellite through soft proton clouds in the Earth's magnetosphere. An analysis of the light curve of the uncontaminated portions of the light curve did not reveal any variation on the known optical period of variation for this star, and a general search for periodic variability also did not find any significant periods of variation.

Miller, Nathan A.↗

HERSCHEL-ATLAS GALAXY COUNTS AND HIGH-REDSHIFT LUMINOSITY FUNCTIONS: THE FORMATION OF MASSIVE EARLY-TYPE GALAXIES

Exploiting the Herschel Astrophysical Terahertz Large Area Survey Science Demonstration Phase survey data, we have determined the luminosity functions (LFs) at rest-frame wavelengths of 100 and 250 {mu}m and at several redshifts z {approx}> 1, for bright submillimeter galaxies with star formation rates (SFRs) {approx}> 100 M{sub Sun} yr{sup -1}. We find that the evolution of the comoving LF is strong up to z Almost-Equal-To 2.5, and slows down at higher redshifts. From the LFs and the information on halo masses inferred from clustering analysis, we derived an average relation between SFR and halo mass (and its scatter). We also infer that the timescale of the main episode of dust-enshrouded star formation in massive halos (M{sub H} {approx}> 3 Multiplication-Sign 10{sup 12} M{sub Sun }) amounts to {approx}7 Multiplication-Sign 10{sup 8} yr. Given the SFRs, which are in the range of 10{sup 2}-10{sup 3} M{sub Sun} yr{sup -1}, this timescale implies final stellar masses of the order of 10{sup 11}-10{sup 12} M{sub Sun }. The corresponding stellar mass function matches the observed mass function of passively evolving galaxies at z {approx}> 1. The comparison of the statistics for submillimeter and UV-selected galaxies suggests that the dust-free, UV bright phase is {approx}> 10{sup 2} times shorter than the submillimeter bright phase, implying that the dust must form soon after the onset of star formation. Using a single reference spectral energy distribution (SED; the one of the z Almost-Equal-To 2.3 galaxy SMM J2135-0102), our simple physical model is able to reproduce not only the LFs at different redshifts >1 but also the counts at wavelengths ranging from 250 {mu}m to Almost-Equal-To 1 mm. Owing to the steepness of the counts and their relatively broad frequency range, this result suggests that the dispersion of submillimeter SEDs of z > 1 galaxies around the reference one is rather small.

79 ASTRONOMY AND ASTROPHYSICS↗