Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “complexity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Synthesis, photophysical and oxygen-sensing properties of a novel Eu{sup 3+} complex incorporated in mesoporous MCM-41

A novel Eu{sup 3+} complex of Eu(DPIQ)(TTA){sub 3} (DPIQ=10H-dipyrido [f,h] indolo [3,2-b] quinoxaline, TTA=2-thenoyltrifluoroacetonate) was synthesized and encapsulated in the mesoporous MCM-41, hoping to explore an oxygen-sensing system based on the long-lived Eu{sup 3+} emitter. The Eu(DPIQ)(TTA){sub 3}/MCM-41 composites were characterized by infrared spectra (IR), ultraviolet-visible (UV-vis) absorption spectra, small-angle X-ray diffraction (SAXRD), luminescence intensity quenching upon various oxygen concentrations, and fluorescence decay analysis. The results indicated that the composites exhibited the characteristic emission of the Eu{sup 3+} ion and the fluorescence intensity of {sup 5}D{sub 0}-{sup 7}F{sub 2} obviously decreased with increasing oxygen concentrations. The oxygen sensing properties of the composites with different loading levels of Eu(DPIQ)(TTA){sub 3} complex were investigated. A sensitivity of 3.04, a short response time of 7 s, and good linearity were obtained for the composites with a loading level of 20 mg/g. These results are the best reported values for optical oxygen-sensing materials based on Eu{sup 3+} complexes so far. - Graphical abstract: Novel optical oxygen-sensing composites are prepared by incorporating a novel Eu{sup 3+} complex Eu(DPIQ)(TTA){sub 3} into MCM-41. The emission intensity of Eu(DPIQ)(TTA){sub 3}/MCM-41 composites exhibits a strong oxygen dependent characteristic and the composite with a loading level of 20 mg/g possesses better fluorescence quenching with increasing oxygen concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New divalent manganese complex with pyridine carboxylate N-oxide ligand: Synthesis, structure and magnetic properties

Two new manganese complexes, [Mn{sub 3}(L{sup 1}){sub 4}(NO{sub 3}){sub 2}]{sub n} (1, HL{sup 1}=nicotinate N-oxide acid) and [MnL{sup 2}Cl]{sub n} (2, HL{sup 2}=isonicotinate N-oxide acid)], have been hydrothermally synthesized and characterized by elemental analysis, IR and single-crystal X-ray diffraction. In 1, the L{sup 1} ligands take two different coordinated modes bridging four and three Mn{sup II} ions. The nitrate anions take chelating coordination modes, leading one type of the Mn{sup II} ions as a 4-connected node. The whole net can be viewed as a 3, 4, 6-connected 4-nodal net with Schlaefli notation {l_brace}4{sup 3{r_brace}}2{l_brace}4{sup 4}; 6{sup 2{r_brace}}4{l_brace}4{sup 6}; 6{sup 6}; 8{sup 3{r_brace}}. Complex 2 has a honeycomb layer mixed bridged by chlorine, N-oxide and carboxylate. The adjacent layers are linked by the phenyl ring of L{sup 2} ligand, giving a 3D framework with a {l_brace}3{sup 4}; 5{sup 4{r_brace}} {l_brace}3{sup 2};4;5{sup 6};6{sup 6{r_brace}} 4, 6-connect net. Magnetic studies indicate that 1 is an antiferromagnet with low-dimensional characteristic, in which a -J{sub 1}J{sub 1}J{sub 2}- coupled alternating chain is predigested. Fitting the data of 1 gives the best parameters J{sub 1}=-2.77, J{sub 2}=-0.67 cm{sup -1}. The magnetic properties of complex 2 represent the character of the 2D honeycomb layer with the J{sub 1}=-2.05 and J{sub 2}=0.55 cm{sup -1}, which results in a whole antiferromagnetic state. - Graphical abstract: The synthesis, crystal structure and magnetic properties of two new MnII complexes with pyridyl-carboxylate N-oxide ligands are reported.

36 MATERIALS SCIENCE↗

Facet-Dependent Water Inhibition of Alkanol Dehydration on TiO2 via Distinct Water–Alkanol Complexes

Water is ubiquitous in biomass-derived feeds, yet its molecular impact on oxygen-elimination reactions remains poorly understood, particularly for catalysts exposing different facets. Here, we utilize well-defined TiO2 nanocrystals with dominant (101) and (001) facets to reveal a pronounced facet-dependent effect of water, where inhibition for dehydration of isopropanol (IPA) on the TiO2(001) surface is about four times more severe than TiO2(101). Through a combination of in situ solid state NMR, in situ infrared spectroscopy, kinetics studies, and theoretical calculations, we demonstrate that this disparity arises from the formation of distinct alkanol-water complex intermediates. On TiO2(001), IPA undergoes dissociative adsorption to form an isopropoxide-H2O complex that readily drives the surface into a complex-dominated regime. This pathway increases the activation barrier for C–H cleavage by 40 kJ mol-1 by inducing a disordered transition state. In contrast, TiO2(101) favors molecular IPA adsorption with weak hydrogen bonding to water, resulting in a smaller complex formation constant and a much smaller activation barrier increase (25 kJ mol-1). By quantitatively linking facet-dependent complex coverage to transition-state destabilization, this work moves beyond simple site-blocking models and provides a conceptual framework for designing catalysts that remain active in water-containing environments

Hu, Wenda↗

Solid-State Interconversions: Unique 100 % Reversible Transformations between the Ground and Metastable States in Single-Crystals of a Series of Nickel(II) Nitro Complexes

The solid-state, low-temperature linkage isomerism in a series of five square planar group 10 phosphino nitro complexes have been investigated by a combination of photocrystallographic experiments, Raman spectroscopy and computer modelling. The factors influencing the reversible solid-state interconversion between the nitro and nitrito structural isomers have also been investigated, providing insight into the dynamics of this process. The cis-[Ni(dcpe)- (NO 2 ) 2 ] (1) and cis-[Ni(dppe)(NO 2 ) 2 ] (2) complexes show reversible 100% interconversion between the h 1 -NO 2 nitro isomer and the h 1 -ONO nitrito form when single-crystals are irradiated with 400 nm light at 100 K. Variable temperature photocrystallographic studies for these complexes established that the metastable nitrito isomer reverted to the ground-state nitro isomer at temperatures above 180 K. By comparison, the related trans complex [Ni(PCy 3 ) 2 (NO 2 ) 2 ] (3) showed 82% conversion under the same experimental conditions at 100 K. The level of conversion to the metastable nitrito isomers is further reduced when the nickel centre is replaced by palladium or platinum. Prolonged irradiation of the trans-[Pd(PCy 3 ) 2 (NO 2 ) 2 ] (4) and trans-[Pt(PCy 3 ) 2 (NO 2 ) 2 ] (5) with 400 nm light gives reversible conversions of 44 and 27%, respectively, consistent with the slower kinetics associated with the heavier members of group 10. The mechanism of the interconversion has been investigated by theoretical calculations based on the model complex [Ni(dmpe)Cl(NO 2 )].

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Designed Single-Step Synthesis, Structure, and Derivative Textural Properties of Well-Ordered Layered Penta-coordinate Silicon Alcoholate Complexes

The controllable synthesis of well-ordered layered materials with specific nanoarchitecture poses a grand challenge in materials chemistry. Here the solvothermal synthesis of two structurally analogous 5-coordinate organosilicate complexes through a novel transesterification mechanism is reported. Since the polycrystalline nature of the intrinsic hypervalent Si complex thwarts the endeavor in determining its structure, a novel strategy concerning the elegant addition of a small fraction of B species as an effective crystal growth mediator and a sacrificial agent is proposed to directly prepare diffraction-quality single crystals without disrupting the intrinsic elemental type. In the determined crystal structure, two monomeric primary building units (PBUs) self-assemble into a dimeric asymmetric secondary BU via strong Na+O2- ionic bonds. The designed one-pot synthesis is straightforward, robust, and efficient, leading to a well-ordered (10)-parallel layered Si complex with its principal interlayers intercalated with extensive van der Waals gaps in spite of the presence of substantial Na+ counter-ions as a result of unique atomic arrangement in its structure. However, upon fast pyrolysis, followed by acid leaching, both complexes are converted into two SiO2 composites bearing BET surface areas of 163.3 and 254.7m(2)g(-1) for the pyrolyzed intrinsic and B-assisted Si complexes, respectively. The transesterification methodology merely involving alcoholysis but without any hydrolysis side reaction is designed to have generalized applicability for use in synthesizing new layered metal-organic compounds with tailored PBUs and corresponding metal oxide particles with hierarchical porosity.

Li, XS↗

Synthesis and Structure of Uranium‐Silylene Complexes

Abstract While carbene complexes of uranium have been known for over a decade, there are no reported examples of complexes between an actinide and a „heavy carbene.“ Herein, we report the syntheses and structures of the first uranium‐heavy tetrylene complexes: (CpSiMe 3 ) 3 U‐Si[PhC(NR) 2 ]R’ (R= t Bu, R’=NMe 2 1 ; R= i Pr, R’=PhC(N i Pr) 2 2 ). Complex 1 features a kinetically robust uranium‐silicon bonding interaction, while the uranium‐silicon bond in 2 is easily disrupted thermally or by competing ligands in solution. Calculations reveal polarized σ bonds, but depending on the substituents at silicon a substantial π‐bonding interaction is also present. The complexes possess relatively high bond orders which suggests primarily covalent bonding between uranium and silicon. These results comprise a new frontier in actinide‐heavy main‐group bonding.

Brackbill, I. Joseph↗

Synthesis and Characterization of a Masked Terminal Nickel-Oxide Complex

In exploring terminal nickel-oxo complexes, postulated to be the active oxidant in natural and non-natural oxidation reactions, we report the synthesis of the pseudo-trigonal bipyramidal Ni II complexes (K)[Ni II (L Ph )(DMF)] (1[DMF]) and (NMe 4 ) 2 [Ni II (L Ph )(OAc)] (1[OAc]) (L Ph =2,2’,2’’-nitrilo-tris-(N-phenylacetamide); DMF=N,N-dimethylformamide; - OAc=acetate). Both complexes were characterized using NMR, FTIR, ESI-MS, and X-ray crystallography, showing the L Ph ligand to bind in a tetradentate fashion, together with an ancillary donor. The reaction of 1[OAc] with peroxyphenyl acetic acid (PPAA) resulted in the formation of [(L Ph )Ni III -O-H∙∙∙OAc] 2- , 2, that displays many of the characteristics of a terminal Ni=O species. 2 was characterized by UV-Vis, EPR, and XAS spectroscopies and ESI-MS. 2 decayed to yield a Ni II -phenolate complex 3 (through aromatic electrophilic substitution) that was characterized by NMR, FTIR, ESI-MS, and X-ray crystallography. 2 was capable of hydroxylation of hydrocarbons and epoxidation of olefins, as well as oxygen atom transfer oxidation of phosphines at exceptional rates. While the oxo-wall remains standing, this complex represents an excellent example of a masked metal-oxide that displays all of the properties expected of the ever elusive terminal M=O beyond the oxo-wall.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heteroleptic Square Planar Cobalt(I/II) Complexes

Reduction of the cobalt(II) chloride complex, Ph 2 B( t BuIm) 2 Co(THF)Cl (1) in the presence of t BuN≡C affords the diamagnetic, square planar cobalt(I) complex Ph 2 B( t BuIm) 2 Co(C≡N t Bu) 2 (2). This is a rare example of a 16-electron cobalt(I) complex that is structurally related to square planar noble metal complexes. Accordingly, the electronic structure of 2, as calculated by DFT, reveals that the HOMO is largely d z 2 in character. Complex 2 is readily oxidized to its cobalt(II) congener [Ph 2 B( t BuIm) 2 Co(C=N t Bu) 2 ]BPh 4 (3-BPh 4 ), whose EPR spectral parameters are characteristic of low-spin d 7 with an unpaired electron in an orbital of d z 2 parentage. Further, this is also consistent with the results of DFT calculations. Despite its 16-electron configuration and the d z 2 parentage of the HOMO, the only tractable reactions of 2 involve one electron oxidation to afford 3.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Changes to the Gd‐DTPA Complex at Varying Ligand Protonation State

Abstract Diethylenetriaminepentaacetic acid (DTPA) is a chelating agent whose complex with the Gd 3+ ion is used in medical imaging. DTPA is also used in lanthanide‐actinide separation processes. As protonation of the DTPA ligand can facilitate dissociation of the Gd 3+ ion from the Gd‐DTPA complex, this work investigates the coordination structures of the aqueous Gd 3+ ion and its environment when chelated by DTPA in eight different DTPA protonation states. Both classical and ab initio molecular dynamics (MD) simulations are conducted to model the solvated complexes. Extended X‐ray absorption fine structure (EXAFS) measurements of the Gd 3+ aqua ion, and the Gd‐DTPA complex at pH 1 and 11, are compared to EXAFS spectra predicted from the MD simulations to verify the accuracy of the MD structures. The findings of this work provide atomic‐level details into the fluctuating Gd‐DTPA complex environment as the DTPA ligand gradually detaches from the Gd 3+ ion with increased protonation.

Chemistry↗

Comparing π‐complexation capabilities of ionic liquids containing silver(I) and copper(I) ions by headspace single drop microextraction in combination with high‐performance liquid chromatography

Selective π‐complexation capabilities of silver(I) and copper(I) ions can be effectively facilitated in ionic liquids. To understand the effects of environmental factors that influence the π‐complexation of these metal ions with analytes, techniques that employ small volumes of ionic liquid that can be readily analyzed are desired. In this study, headspace single drop microextraction coupled with HPLC is used to investigate a diverse set of environmental factors on the metal ion‐mediated complexation with aromatic compounds in ionic liquid media. Silver(I) and copper(I) bis[(trifluoromethyl)sulfonyl]imide salts were both studied by dissolving them in the 1‐decyl‐3‐methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ionic liquid and employing the mixture as extraction media for aromatic compounds. Water and acetonitrile within the sample solution were observed to interfere with the complexation of silver(I) ions and aromatic compounds, while ethylene glycol and triethylene glycol did not. The temperature and extraction times were optimized to fully facilitate the π‐complexation capabilities of metal ions in ionic liquid media. Partition coefficients between the sample headspace and metal ion were determined using a three‐phase equilibria model. Although no discernable difference in analyte partitioning between the headspace and ionic liquid solvent was observed, analyte partition coefficients to silver(I) ion tended to be greater compared to copper(I) ion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the Promotion of Synthons of Choice: Halogen Bonding in Molecular Lanthanide Complexes Characterized via X-ray Diffraction, Luminescence Spectroscopy, and Magnetic Measurements

Promotion of a synthon of choice for the non-covalent assembly of lanthanide tectons represents both a noteworthy challenge and opportunity within Ln(III) hybrid materials. We have developed a system wherein some control can be exercised over supramolecular assembly and, as part of continued efforts to improve this process we have generated a family of ten new lanthanide (Ln = Sm 3+ -Lu 3+ )-2,4,6-trichlorobenzoic acid-1,10- phenanthroline molecular complexes. Delineation of criteria for promoting assembly via halogen based interactions was introduced previously and is refined herein based on the characterization of complexes 1-10 via single crystal X-ray diffraction. Direct comparison of means of supramolecular assembly for 1-10 with isostructural Ln-pchlorobenzoic acid-1,10-phenathroline analogues verifies that increasing the number of halogens at the periphery of a tecton is one route that increases the frequency of halogen bonding interactions. Additionally, solid-state visible and near-IR photoluminescence and luminescent lifetime data were collected for complexes 1 (Sm 3+ ), 2 (Eu 3+ ), 4 (Tb 3+ ), 5 (Dy 3+ ), 6 (Ho 3+ ), 7 (Er 3+ ), and 9 (Yb 3+ ) and characteristic emission was observed for all complexes except 6. Further, direct current magnetic susceptibility measurements were carried out for complexes 5 (Dy 3+ ) and 7 (Er 3+ ), and two slow magnetic relaxation processes were characterized using alternating current magnetic susceptibility measurements for 5.

36 MATERIALS SCIENCE↗

Binding complexity and multiparty entanglement

We introduce “binding complexity”, a new notion of circuit complexity which quantifies the difficulty of distributing entanglement among multiple parties, each consisting of many local degrees of freedom. We define binding complexity of a given state as the minimal number of quantum gates that must act between parties to prepare it. To illustrate the new notion we compute it in a toy model for a scalar field theory, using certain multiparty entangled states which are analogous to configurations that are known in AdS/CFT to correspond to multiboundary wormholes. Pursuing this analogy, we show that our states can be prepared by the Euclidean path integral in (0 + 1)-dimensional quantum mechanics on graphs with wormhole-like structure. We compute the binding complexity of our states by adapting the Euler-Arnold approach to Nielsen’s geometrization of gate counting, and find a scaling with entropy that resembles a result for the interior volume of holographic multiboundary wormholes. We also compute the binding complexity of general coherent states in perturbation theory, and show that for “double-trace deformations” of the Hamiltonian the effects resemble expansion of a wormhole interior in holographic theories.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Image Fusion Guidance for In Situ Laser Fenestration of Aortic Stent graft for Endovascular Repair of Complex Aortic Aneurysm: Feasibility, Efficacy and Overall Functional Success

Objective: To evaluate feasibility, efficacy and overall functional success of image fusion guidance during laser-assisted in situ fenestration of aortic stent graft (LISFAS) for endovascular repair of complex aortic aneurysm (complex-EVAR) in a prospective study. Methods: Between September 2016 and July 2018, 20 patients were included and treated with LISFAS for complex-EVAR. Aortic aneurysms were either para-renal (n = 15) or thoraco-abdominal (n = 5) with 57 mm [first quartile: 54; third quartile: 68] median aneurysm diameter in 69 years [68;78] patients. All interventions were performed using the same angiographic system and 3D image fusion software for overlying pre-intervention CTA on per-intervention 2D fluoroscopy with cone-beam CT images to display target vessels ostia. Results: LISFAS for complex-EVAR with image fusion was performed in all patients, and no endovascular intervention required conversion to an open aortic repair. LISFAS of all target vessels was feasible in 18 patients (90%); 48 fenestrations out of 50 were performed successfully. Two fenestrations failed for renal arteries in two patients. Median ischemic times were as follows: 34 min [25;43] for superior mesenteric artery; 69 min [56;83] for left renal artery; 73 min [36;102] for right renal artery; and 93 min [89;96] for the celiac trunk. Median intervention and fluoroscopy times, iodinated contrast volume and X-ray exposure were 180 min [150;180], 74 min [64;87], 80 mL [59;113] and 338 Gy.cm{sup 2} [259;495], respectively. Efficacy was found in 17 patients (85%) on one-week follow-up CTA: Two patients had type 1 and 3 endoleaks, respectively, that were successfully embolized. Overall functional success was 90%. Median hospitalization stay was 9 days [8, 17]. The 30-day safety analysis was 90% (n = 2 deaths) owing to an undetermined cause and to bowel ischemia after low flow in intensive care unit. Conclusions: LISFAS using image fusion was feasible, efficient and overall functionally successful for complex-EVAR in this preliminary study.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Complexation of Am(III) and Nd(III) by 1,10-Phenanthroline-2,9-Dicarboxylic Acid

The complexant 1,10-phenanthroline-2,9-dicarboxylic acid (PDA) is a planar tetradentate ligand that is more preorganized for metal complexation than its unconstrained analogue ethylendiiminodiacetic acid (EDDA). Furthermore, the backbone nitrogen atoms of PDA are aromatic, hence are softer than the aliphatic amines of EDDA. It has been hypothesized that PDA will selectively bond to trivalent actinides over lanthanides. In this report, the results of spectrophotometric studies of the complexation of Nd(III) and Am(III) by PDA are reported. Because the complexes are moderately stable, it was necessary to conduct these titrations using competitive equilibrium methods, competitive cation omplexing between PDA and diethylenetriaminepentaacetic acid, and competition between ligand protonation and complex formation. Stability constants and ligand protonation constants were determined at 0.1 mol/L ionic strength and at 0.5 mol/L ionic strength nitrate media at 21 ± 1 C. The stability constants are lower than those predicted from first principles and speciation calculations indicate that Am(III) selectivity over Nd(III) is less than that exhibited by 1,10-phenanthroline.

1,10-Phenanthroline-2,9-diacetic acid↗

Structure of Methanol Solvated Iodozinc(II) Complexes in Solution

The structures of the solvated zinc ion and the solvated zinc–iodide complexes in methanol solution have been determined by EXAFS. The zinc ion is six-coordinated in an octahedral fashion with a mean Zn–O bond distance of 2.071(4) Å . According to the stability constants of the zinc–iodide system in methanol solution the first complex, ZnI + , is suppressed, which may indicate that a coordination change takes place at this step. On the other hand, the second complex, ZnI 2 , predominates at excess of iodide. The methanol solvated ZnI 2 complex has a tetrahedral structure with mean Zn–I and Zn–O bond distances of 2.55(1) and 1.99(1) Å , respectively. The mean Zn–I bond distance in a solution containing a maximal content of ZnI + , ca. 12%, strongly indicates that the first complex also has a tetrahedral structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nano-mechanical mapping of the interactions between surface-bound RC-LH1-PufX core complexes and cytochrome c 2 attached to an AFM probe

Electron transfer pathways in photosynthesis involve interactions between membrane-bound complexes such as reaction centres with an extrinsic partner. In this study, the biological specificity of electron transfer between the reaction centre-light-harvesting 1-PufX complex and its extrinsic electron donor, cytochrome c 2 , formed the basis for mapping the location of surface-attached RC-LH1-PufX complexes using atomic force microscopy (AFM). This nano-mechanical mapping method used an AFM probe functionalised with cyt c 2 molecules to quantify the interaction forces involved, at the single-molecule level under native conditions. With surface-bound RC-His 12 -LH1-PufX complexes in the photo-oxidised state, the mean interaction force with cyt c 2 is approximately 480 pN with an interaction frequency of around 66 %. The latter value lowered 5.5-fold when chemically reduced RC-His 12 -LH1-PufX complexes are imaged in the dark to abolish electron transfer from cyt c 2 to the RC. The correspondence between topographic and adhesion images recorded over the same area of the sample shows that affinity-based AFM methods are a useful tool when topology alone is insufficient for spatially locating proteins at the surface of photosynthetic membranes.

14 SOLAR ENERGY↗

Interpreting the Lipidome: Bioinformatic Approaches to Embrace the Complexity

Background Improvements in mass spectrometry (MS) technologies coupled with bioinformatics developments have allowed considerable advancement in the measurement and interpretation of lipidomics data in recent years. Since research areas employing lipidomics are rapidly increasing, there is a great need for bioinformatic tools that capture and utilize the complexity of the data. Currently, the diversity and complexity within the lipidome is often concealed by summing over or averaging individual lipids up to (sub)class-based descriptors, losing valuable information about biological function and interactions with other distinct lipids molecules, proteins and/or metabolites. Aim of review To address this gap in knowledge, novel bioinformatics methods are needed to improve identification, quantification, integration and interpretation of lipidomics data. The purpose of this mini-review is to summarize exemplary methods to explore the complexity of the lipidome. Key scientific concepts of review Here we describe six approaches that capture three core focus areas for lipidomics: (1) lipidome annotation including a resolvable database identifier, (2) interpretation via pathway- and enrichment-based methods, and (3) understanding complex interactions to emphasize specific steps in the analytical process and highlight challenges in analyses associated with the complexity of lipidome data.

Kyle, Jennifer E.↗

Formation Mechanism and Nucleation Effect of Ti{sub 2}O{sub 3}–TiN Complex Nucleus at Solidification Front of 18Cr Ferritic Stainless Steel

Formation mechanism of Ti{sub 2}O{sub 3}–TiN complex nucleus and its nucleation effect on δ-Fe at solidification front of Fe-18Cr ferritic stainless steel was investigated through experimental and theoretical methods. According to the equilibrium calculation, Ti{sub 2}O{sub 3} will crystallize in the molten steel before solidification and TiN will not form until the solid phases appear. However, complex nucleus and equiaxed grains exist in the edge of Ti-bearing ingot, where the solidification velocity and temperature gradient are high. Therefore, complex nucleus is indicated to be formed at solidification front and a non-equilibrium solidification model for multi-component alloy was established to investigate the dendrite tip interface phenomenon. The calculation results exhibit an element enrichment at solidification front and explain well with the formation of complex nucleus before solidification. It is also found that there is approximate lattice matching between TiN, and Ti{sub 2}O{sub 3}, δ-Fe on the basis of disregistry theory. These results are consistent with the observed complex nucleus and the increased equiaxed zone ratio (EZR) of Ti-bearing ferritic stainless steel.

36 MATERIALS SCIENCE↗