Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “circular”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Reconfigurable Wideband Circularly Polarized Stacked Square Patch Antenna for Cognitive Radios

An almost square patch, a square patch and a stacked square patch with corner truncation for circular polarization (CP) are researched and developed at X-band for cognitive radios. Experimental results indicate, first, that the impedance bandwidth of a CP almost square patch fed from the edge by a 50 ohm line is 1.70 percent and second, that of a CP square patch fed from the ground plane side by a surface launch connector is 1.87 percent. Third, the impedance bandwidth of a CP stacked square patch fed by a surface launch connector is 2.22 percent. The measured center frequency for the CP square patch fed by a surface launch connector without and with an identical stacked patch is 8.45 and 8.1017 GHz, respectively. By stacking a patch, separated by a fixed air gap of 0.254 mm, the center frequency is observed to shift by as much as 348.3 MHz. The shift in the center frequency can be exploited to reconfigure the operating frequency by mechanically increasing the air gap. The results indicate that a tuning bandwidth of about 100 MHz can be achieved when the distance of separation between the driven patch and the stacked patch is increased from its initial setting of 0.254 to 1.016 mm.

Cognitive↗
NASA NTRS2018

Vortex Shedding Characteristics of the Wake of a Thin Flat Plate with a Circular Trailing Edge

The near and very near wake of a thin flat plate with a circular trailing edge are investigated with direct numerical simulations (DNS). Data obtained for two different Reynolds numbers (based on plate thickness, D) are the main focus of this study. The separating boundary layers are turbulent in both cases. An earlier investigation of one of the cases (Case F) showed shed vortices in the wake that were about 1.0 D to 4.0 D in spanwise length. Considerable variation in both the strength and frequency of these shed vortices was observed. One objective of the present investigation is to determine the important contributors to this variability in strength and frequency of shed vortices and their finite spanwise extent. Analysis of the data shows that streamwise vortices in the separating boundary layer play an important role in strengthening/weakening of the shed vortices and that high/low-speed streaks in the boundary layer are important contributors to variability in shedding frequency. Both these features of the boundary layer contribute to the finite extent of the vortices in the spanwise direction. The second plate DNS (Case G, with 40 percent of the plate thickness of Case F) shows that while shedding intensity is weaker than obtained in Case F, many of the wake features are similar to that of Case F. This is important in understanding the path to the wake of the thin plate with a sharp trailing edge where shedding is absent. Here we also test the efficacy of a functional relationship between the shedding frequency and the Reynolds numbers based on the boundary layer momentum thickness (Re (sub theta) and D (Re (sub D)); data for developing this behavioral model is from Cases F & G and five earlier DNSs of the flat plate wake.

Turbulent wakes↗
NASA NTRS2019

The Intermediate Wake of a Thin Flat Plate with a Circular Trailing Edge

The intermediate wakes of thin flat plates with circular trailing edges (TEs) are investigated here with direct numerical simulations (DNSs). The separating boundary layers are turbulent in all cases. The near wake in two thin-plate cases (IN & NS), with a focus on the vortex shedding process, was explored in a recent article. Intermittent shedding was observed in Case IN. Case NS, with half the TE diameter of Case IN, was an essentially non-shedding case. A third case (ST) with a sharp trailing edge was also investigated and found to exhibit an intermittent wake instability. The objectives of the present study are twofold. The first is to determine if the wake instability found in Case ST exists in Cases IN and NS as well. The second is to provide the distributions of the turbulent normal intensities and shear stress in the wake and to understand these distributions via the budget terms in the corresponding transport equations. The results show that both Cases IN & NS exhibit a wake instability in the intermediate wake region, that is similar to that found earlier in Case ST. We note that in Case IN, the presence of an intermediate-wake instability results in the co-existence of two different types of instability within a single wake. The distributions of the turbulent normal intensities and shear stress, and the budget terms for the streamwise intensity are included and discussed here. All the budget terms contribute appreciably to the overall budget in the transport equation for streamwise normal intensity.

Rai, Man Mohan↗
NASA NTRS2020

Buckling of Thin-Walled Circular Cylinders

Recent industry and NASA experience with the development of launch vehicle structures have indicated a need for updated monographs for the design of buckling-critical structures that account for state-of-the-art structural configurations, material systems, and computational tools. This monograph provides an update to NASA SP-8007 (circa 1965, and 1968) and was prepared under the cognizance of the NASA Engineering and Safety Center (NESC). It summarizes all significant knowledge and experience accumulated from the NESC Shell Buckling Knockdown Factor (SBKF) Assessment (NESC Assessment #: 07-010-E) to date for use in the design of buckling-critical thin-walled circular cylinders. The format and terminology used in this monograph is similar to previous versions of NASA SP-8007 for ease of understanding and implementation. In addition, as with the design recommendations contained in the previous versions of NASA SP-8007, this monograph is to be regarded as a guideline to design and not as a NASA requirement, unless specified in formal program requirements. Furthermore, it is expected that the guidelines presented in this monograph will be updated as appropriate. Designers are advised to stay abreast of updates in the state-of-the-art and corresponding design criteria.

Buckling↗
NASA NTRS1992

Orbit Maintenance For Low Altitude Near-Circular Lunar Orbits

The behavior of low altitude near-circular lunar orbits is a key design issue for some missions in the proposed Space Exploration Initiative. The Lunar gravity field strongly perturbs low altitude orits, so an effective orbit maintenance strategy is needed.

Near-Ciucular↗
NASA NTRS2021

The Near and Intermediate Wake of a Thick Flat Plate with a Circular Trailing Edge

The near and intermediate wake regions of a thick flat plate with a circular trailing edge (TE) are investigated with a direct numerical simulation (DNS). The focus is on the region x/D < 43.0(D is the diameter of the TE). The upper and lower separating boundary layers are both turbulent and are statistically identical; the resulting wake is symmetric in the mean. The present study is a continuation of an earlier investigation (Case AX). The earlier research dealt with shed vortex structure, in particular the persistence of the coherence of these vortices with increasing streamwise distance (except for infrequent, random disruption/rupture). In addition, across-centerline movement (ACM)of shed vortices, that is prevalent past x/D = 20.0 in a cylinder case at a comparable Reynolds number, was found to be essentially absent in Case AX. In the present investigation, an underlying cause for the occasional disruption/rupture of shed vortices is explored. Strong interactions between subsequent shed vortices in the trailing edge region is found to be an important contributor to this phenomenon. The distributions of phase-averaged streamwise and cross-stream components of intensity and the corresponding budget terms in the near wake are compared with those obtained in the intermediate wake here. In addition, the main features of the distribution of the phase-averaged velocity pressure-gradient term are compared with those of the production term, for the two intensity components. Except for a change in sign, the important features in the two budget terms are qualitatively similar for both components.

Direct Numerical Simulations of Flat Plate Wake↗
NASA NTRS2020

Rapid and Accurate Computation of Invariant Tori, Manifolds, and Connections Near Mean Motion Resonances in the Periodically Perturbed Planar Circular Restricted 3-Body Problem Models

When the planar circular restricted 3-body problem (RTBP) is periodically perturbed, most unstable resonant periodic orbits become invariant tori. In this study, we 1) develop a quasi-Newton method which simultaneously solves for the tori and their center, stable, and unstable directions; 2) implement continuation by both perturbation as well as rotation numbers; 3) compute Fourier-Taylor parameterizations of the stable and unstable manifolds; 4) globalize these manifolds; 5) compute homoclinic and heteroclinic connections. Our methodology improves on efficiency and accuracy compared to prior studies, and applies to a variety of periodic perturbations. We demonstrate the tools on the planar elliptic RTBP.

de la Llave, Rafael↗
NASA NTRS2021

Using GPUs and the Parameterization Method for Rapid Search and Refinement of Connections between Tori in Periodically Perturbed Planar Circular Restricted 3-Body Problems

When the planar circular restricted 3-body problem is periodically perturbed, most unstable periodic orbits become invariant tori. However, 2D Poincare ́ sections no longer work to find their manifolds’ intersections; new methods are needed. In this study, we first review a method of restricting the intersection search to only certain manifold subsets. We then implement this search using Julia and OpenCL, representing the manifolds as triangular meshes and gaining a 30x speedup using GPUs. We finally show how to use manifold parametrizations to refine the ap- proximate connections found in the mesh search. We demonstrate the tools on the planar elliptic RTBP.

de la Llave, Rafael↗
NASA NTRSDate not supplied

Flat-Panel Wideband Dual-Circularly Polarized 8X8 Phased Array Antenna for SATCOM Applications

A wideband, dual-circularly polarized (CP) 8×8 phased array is designed for operation at K-/Ka-band, which exhibits wide impedance and axial ratio (AR) bandwidths that encompass both of the desired satellite communication (SATCOM) bands of 22.55–23.55 GHz and 25.5–27.5 GHz. The array has a scan range of ±50° and ±36° at 23.05 GHz and 26.5 GHz, which are the center frequencies of the two aforementioned bands. The array has been integrated with a beamforming network utilizing 5G silicon RFICs, and the measurement results will be presented during the conference.

phased array antenna↗
NASA NTRSDate not supplied

Summary of Shock Wave Turbulent Boundary Layer Interaction Experiments In a Circular Test Section

A series of experiments were performed at Mach 2.5 in a 17 cm diameter circular test section to characterize an impinging/reflected shock wave turbulent boundary layer interaction generated by a cone-cylinder centerbody. The cone-cylinder centerbody generates a conical shock wave that interacts with the naturally occurring boundary layer developing on the test section wall. Three different cone angles were used in the experiment to study unseparated, incipiently separated, and separated interactions. When the cone-cylinder centerbody is positioned on the centerline, a flowfield which is two-dimensional in the mean is generated. Three dimensional interactions were also created by offsetting the cone-cylinder centerbody from the test section centerline. The results are intended to provide benchmark quality datasets for computational fluid dynamics (CFD) validation without the pitfalls inherent in rectangular configurations where corner effects prohibit a truly two-dimensional flow in the mean. The experimental measurements included surface flow visualization, wall static pressure, flowfield Pitot tube pressure, constant-voltage anemometry (CVA) normal hot-wire, and particle image velocimetry (PIV) measurements. The hot-wire measurements were used to calculate mean mass flux and total temperature profiles, mass flux and total temperature turbulence intensities, and the mass flux-total temperature correlation. The PIV measurements provide three-dimensional mean velocity measurements. Agreement between the pressure, hot-wire, and PIV measurements is established in the undisturbed upstream flowfield.

Supersonic↗
NASA NTRSDate not supplied

Summary of Shock Wave Turbulent Boundary Layer Interaction Experiments in a Circular Test Section

A series of experiments were performed at Mach 2.5 in a 17 cm diameter circular test section to characterize an impinging/reflected shock wave turbulent boundary layer interaction generated by a cone-cylinder centerbody. The cone-cylinder centerbody generates a conical shock wave that interacts with the naturally occurring boundary layer developing on the test section wall. Three different cone angles were used in the experiment to study unseparated, incipiently separated, and separated interactions. When the cone-cylinder centerbody is positioned on the centerline, a flowfield which is two-dimensional in the mean is generated. Three dimensional interactions were also created by offsetting the cone-cylinder centerbody from the test section centerline. The results are intended to provide benchmark quality datasets for computational fluid dynamics (CFD) validation without the pitfalls inherent in rectangular configurations where corner effects prohibit a truly two-dimensional flow in the mean. The experimental measurements included surface flow visualization, wall static pressure, flowfield Pitot tube pressure, constant-voltage anemometry (CVA) normal hot-wire, and particle image velocimetry (PIV) measurements. The hot-wire measurements were used to calculate mean mass flux and total temperature profiles, mass flux and total temperature turbulence intensities, and the mass flux-total temperature correlation. The PIV measurements provide three-dimensional mean velocity measurements. Agreement between the pressure, hot-wire, and PIV measurements is established in the undisturbed upstream flowfield.

compressible flow↗
NASA NTRSDate not supplied

Efficient Power Management of an Active Phased Array Antenna Via Circular Aperture Reduction

Significant commercial investments in terrestrial 5G communication systems have matured state-of-the-art Ka-band active phased array (APA) antennas, and their entrance into integrated SATCOM terminals provides space mission designers with new trades and considerations. Newly available Ka-band APAs could provide future missions with a small form factor terminal (<1000 cm3) that can perform rapid beam steering without any moving components. However, APA systems generally consume more power than alternative terminal configurations, which motivates our investigation into a power management technique that leverages the APA’s ability to disable individual antenna elements to rapidly trade excess signal strength for reduced power consumption. Our algorithm strategically maps a desired transmitter effective isotropic radiated power (EIRP) to a binary element mask that simultaneously minimizes the number of active elements and circularizes the antenna’s aperture. We deployed our algorithm on a Cesium Nightingale 1 terminal and emulated a 1.05 Gbps constant-rate link between a low Earth orbit (LEO) satellite and a ground station in an over-the-air test. During the 7m42s pass, the aperture reduction algorithm reduced the average power consumption of the terminal by 27%, the average number of active elements by 56%, and saved 3.9 Wh of energy.

satellite communications↗
NASA NTRSDate not supplied

PIV Measurements of Shock-Wave/Boundary-Layer Interactions at Mach 2.5 in a Circular Test Section

The particle image velocimetry (PIV) measurement technique has been applied to make detailed measurements in an impinging shock-wave/boundary-layer interaction (SWBLI) flowfield in a test section of circular cross-section. By virtue of this test section geometry, the flowfields studied are free from effects of the complex coupling of sidewall and corner interaction into the primary impinging shock interaction typical of a rectangular test section. The cone-cylinder shock generator hardware was arranged in both coaxial alignment with the test section to generate axisymmetric SWBLIs and in offset positions to generate swept SWBLIs. The angle of the conical section was also varied to alter the strength of the impinging shock wave. The application of the PIV technique in this test section required meticulous design to provide adequate optical access without disturbing the SWBLI flow. Details of the stereoscopic PIV apparatus and the velocity measurements obtained for a Mach 2.5 freestream are presented. Key features of the mean velocity and turbulent stress fields are highlighted. This data set should enable validation of computational fluid dynamics results for these flowfields.

Shockwave Boundary Layer Interaction↗
NASA NTRSDate not supplied

PIV Measurements of Shock-Wave/Boundary-Layer Interactions at Mach 2.5 in a Circular Test Section

The particle image velocimetry (PIV) measurement technique has been applied to make detailed measurements in an impinging shock-wave/boundary-layer interaction (SWBLI) flowfield in a test section of circular cross-section. By virtue of this test section geometry, the flowfields studied are free from effects of the complex coupling of sidewall and corner interaction into the primary impinging shock interaction typical of a rectangular test section. The cone-cylinder shock generator hardware was arranged in both coaxial alignment with the test section to generate axisymmetric SWBLIs and in offset positions to generate swept SWBLIs. The angle of the conical section was also varied to alter the strength of the impinging shock wave. The application of the PIV technique in this test section required meticulous design to provide adequate optical access without disturbing the SWBLI flow. Details of the stereoscopic PIV apparatus and the velocity measurements obtained for a Mach 2.5 freestream are presented. Key features of the mean velocity and turbulent stress fields are highlighted. This data set should enable validation of computational fluid dynamics results for these flowfields.

Shockwave Boundary Layer Interaction↗
DOE OSTI2015

Combustor with non-circular head end

The present application provides a combustor for use with a gas turbine engine. The combustor may include a head end with a non-circular configuration, a number of fuel nozzles positioned about the head end, and a transition piece extending downstream of the head end.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2015

Harmonic Resonant Kicker Design for the MEIC Electron Circular Cooler Ring

Bunched-beam electron cooling of the high-energy ion beam emittance may be a crucial technology for the proposed Medium energy Electron Ion Collider (MEIC) to achieve its design luminosity. A critical component is a fast kicker system in the Circular Ring (CR) that periodically switches electron bunches in and out of the ring from and to the driver Energy Recovery Linac (ERL). Compared to a conventional strip-line type kicker, a quarter-wave resonator (QWR)-based deflecting structure has a much higher shunt impedance and so requires much less RF power. The cavity has been designed to resonate simultaneously at many harmonic modes that are integer multiples of the fundamental mode. In this way the resulting waveform will kick only a subset of the circulating bunches. In this paper, analytical shunt impedance optimization, the electromagnetic simulations of this type of cavity, as well as tuner and coupler concept designs to produce 5 odd and 5 even harmonics of 47.63MHz will be presented, in order to kick every 10th bunch in a 476.3 MHz bunch train.

43 PARTICLE ACCELERATORS↗