Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “beam techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Coded-mask-based wavefront sensing technique for APS nanofocusing beamline diagnostics

Here, we extend our recently developed coded-mask wavefront sensing technique to enable single-shot measurements of nanofocused x-ray beams. This method accurately reconstructs the focal beam profile by backpropagating the wavefront measured downstream of the beam focus. To validate its performance, we benchmarked it against the conventional fluorescence wire scan method, successfully measuring ∼120 nm focal spots at the 28-ID-B beamline of the Advanced Photon Source using a polymeric compound refractive lens. The results highlight the effectiveness of coded-mask wavefront sensing for high-precision beam profiling and its application as a real-time wavefront monitoring tool.

Shi, Xianbo [Argonne National Laboratory (ANL), Ar↗
DOE OSTI2024

Observation of d(t,n) α Neutrons Following d(d,p)t Reactions in a Deuterium Gas Cell: An Attempt to Repeat Ruhlig’s 1938 Observation of Secondary Reactions

In order to benchmark methods used to calculate reaction-in-flight fusion reactions in inertial confinement fusion and address issues related to the first claimed observation of d(t,n)α reactions in 1938, secondary d(t,n)α reactions have been observed following d(d,p)t reactions in deuterium gas. A pulsed 200-nA, 2.2-MeV deuterium beam from the Triangle Universities Nuclear Laboratory FN tandem accelerator was injected into a cylindrical multiatmosphere deuterium gas target. The incident beam traversed along the target cylinder’s 3-cm symmetry axis after its passage through a Havar entrance foil. Two different Havar foil thicknesses were used to obtain 1.5- and 0.6-MeV deuteron beams entering the deuterium cell. The cylinder’s radius was 2 cm to allow for d(d,p)t tritons emitted perpendicular to the beam to range out in the deuterium gas. The neutron emission from the cell was observed via its time of flight to a liquid scintillator placed at various angles to the beam direction, at a distance of 243 cm. Pulse-shape-discrimination techniques were used to separate neutron and gamma-ray signals seen in the liquid scintillator. The observed probability of ~2 × 10 –4 for inducing secondary d(t,n)α fusion in the gas cell per d(d,p)t reaction is consistent with theoretical expectations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Constraining the destruction rate of K 40 in stellar nucleosynthesis through the study of the Ar 40 ( p , n ) K 40 reaction

Background: We present that K 40 plays a significant role in the radiogenic heating of Earth-like exoplanets, which can affect the development of a habitable environment on their surfaces. The initial amount of K 40 in the interior of these planets depends on the composition of the interstellar clouds from which they formed. Within this context, nuclear reactions that regulate the production of K 40 during stellar evolution can play a critical role. Purpose: In this study, we constrain for the first time the astrophysical reaction rate of K 40 ( n , p ) Ar 40 , which is responsible for the destruction of K 40 during stellar nucleosynthesis. We provide to the nuclear physics community high-resolution data on the cross section and angular distribution of the Ar 40 ( p , n ) K 40 reaction. These are important to various applications involving Ar 40 . The associated reaction rate of the Ar 40 ( p , n ) K 40 process addresses a reaction rate gap in the Joint Institute for Nuclear Astrophysics REACLIB database in the region of intermediate-mass isotopes. Methods: We performed differential cross-section measurements on the Ar 40 ( p , n ) K 40 reaction, for six energies in the center-of-mass system between 3.2 and 4.0 MeV and various angles between 0 ° and 135 ° . The experiment took place at the Edwards Accelerator Laboratory at Ohio University using the beam swinger target location and a standard neutron time-of-flight technique. We extracted total and partial cross sections by integrating the double differential cross sections we measured. Results: The total and partial cross sections varied with energy due to the contribution from isobaric analog states and Ericson type fluctuations. The energy-averaged neutron angular distributions were symmetrical relative to 90 ° . Based on the experimental data, local transmission coefficients were extracted and were used to calculate the astrophysical reaction rates of Ar 40 ( p , n ) K 40 and K 40 ( n , p ) Ar 40 reactions. The new rates were found to vary significantly from the theoretical rates in the REACLIB library. We implemented the new rates in network calculations to study nucleosynthesis via the slow neutron capture process, and we found that the produced abundance of K 40 is reduced by up to 10% compared to calculations with the library rates. At the same time, the above result removes a significant portion of the previous theoretical uncertainty on the K 40 yields from stellar evolution calculations. Conclusions: Our results support a destruction rate of K 40 in massive stars via the K 40 ( n , p ) Ar 40 reaction that is larger compared to previous estimates. The rate of K 40 destruction via the K 40 ( n , p ) Ar 40 reaction now has a dramatically reduced uncertainty based on our measurement. Lastly, this result directly affects the predicted stellar yields of K 40 from nucleosynthesis, which is a critical input parameter for the galactic chemical evolution models that are currently employed for the study of significant properties of exoplanets.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Precision Measurement of Neutrino Oscillation Parameters with 10 Years of Data from the NOvA Experiment

This Letter reports measurements of muon-neutrino disappearance and electron-neutrino appearance and the corresponding antineutrino processes between the two NOvA detectors in the NuMI neutrino beam. These measurements use a dataset with double the neutrino mode beam exposure that was previously analyzed, along with improved simulation and analysis techniques. A joint fit to these samples in the three-flavor paradigm results in the most precise single-experiment constraint on the atmospheric neutrino mass-splitting, $Δm^2_{32}= 2.431^{+0.036}_{-0.034} (-2.479^{+0.036}_{-0.036}) \times 10^{-3}$~eV$^2$ if the mass ordering is Normal (Inverted). In both orderings, a region close to maximal mixing with $\sin^2θ_{23}=0.55_{+0.06}^{-0.02}$ is preferred. The NOvA data show a mild preference for the Normal mass ordering with a Bayes factor of 2.4 (corresponding to 70% of the posterior probability), indicating that the Normal ordering is 2.4 times more probable than the Inverted ordering. When incorporating a 2D $Δm^2_{32}\textrm{--}\sin^2 2θ_{13}$ constraint based on Daya Bay data, this preference strengthens to a Bayes factor of 6.6 (87\%).

FOS: Physical sciences↗
DOE OSTI2023

Analysis of furnace contamination on superconducting radio frequency niobium using secondary-ion mass spectrometry

Detection of surface contamination on niobium materials used in superconducting radio frequency (SRF) applications is difficult due to quantitative sensitivity and near-atomic depth resolution needed. Inspection of samples known to have experienced surface contamination was found to have inconsistent nitride coverage after high-temperature nitrogen gas exposure (“doping”). Here we compare contaminating species found on samples treated in several different vacuum furnaces, both “exposed” directly in the chamber and “protected” by containment shielding from evaporative sources with “furnace caps.” Typically, furnace caps are used to impede contamination from reaching the interior surface of cavities during the high-temperature vacuum bake that immediately precedes exposure to nitrogen gas. Although, to date, little is known about the effectiveness of these caps, SIMS results showed that they were effective in limiting contamination arising from the furnace environment. Inspection of sample surfaces by SEM showed a lack of nitrides present on contaminated specimens. TEM with energy dispersive spectroscopy performed on these samples revealed that a carbon-rich layer now existed, indicating that a relatively high contaminant load prevents the nucleation and growth of surface nitrides, while thus inhibiting interstitial nitrogen uptake. Except in extreme cases, subsequent removal of the top several micrometers of the surface via electropolishing appears to effectively eliminate any strong influence on the subsequent SRF cavity performance. With the absence of furnace cleaning, carbon contamination was found to be nearly 10× higher for protected nitrogen-doped and electropolished samples, with minimal metallic contamination detected for both processes. SIMS analysis was also performed to compare the cleanliness of samples fully prepared by such nitrogen “doping” with those prepared by a related process, involving the dissolution of niobium surface oxide and diffusion of oxygen into the surface. This oxygen doping or alloying process offers attractive advantages.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Chemical and physical transformations of carbon-based nanomaterials observed by liquid phase transmission electron microscopy

This article addresses recent advances in liquid phase transmission electron microscopy (LPTEM) for studying nanoscale synthetic processes of carbon-based materials that are independent of the electron beam—those driven by nonradiolytic chemical or thermal reactions. In particular, we focus on chemical/physical formations and the assembly of nanostructures composed of organic monomers/polymers, peptides/DNA, and biominerals. The synthesis of carbon-based nanomaterials generally only occurs at specific conditions, which cannot be mimicked by aqueous solution radiolysis. Carbon-based structures themselves are also acutely sensitive to the damaging effects of the irradiating beam, which make studying their synthesis using LPTEM a unique challenge that is possible when beam effects can be quantifi ed and mitigated. With new direct sensing, high frame rate cameras, and advances in liquid-cell holder designs, combined with a growing understanding of irradiation effects and proper experimental controls, microscopists have been able to make strides in observing traditionally problematic carbon-based materials under conditions where synthesis can be controlled, and imaged free from beam effects, or with beam effects quantified and accounted for. These materials systems and LPTEM experimental techniques are discussed, focusing on nonradiolytic chemical and physical transformations relevant to materials synthesis.

Parent, Lucas R.↗
DOE OSTI2022

Doppler Lidar (DL) Instrument Handbook

The Doppler lidar (DL) is an active remote sensing instrument that provides range- and time-resolved measurements of radial velocity and attenuated backscatter. The principle of operation is similar to radar in that pulses of energy are transmitted into the atmosphere; the energy scattered back to the transceiver is collected and measured as a time-resolved signal. From the time delay between each outgoing transmitted pulse and the backscattered signal, the distance to the scatterer is inferred. The radial or line-of-sight velocity of the scatterers is determined from the Doppler frequency shift of the backscattered radiation. The DL uses a heterodyne detection technique in which the return signal is mixed with a reference laser beam (i.e., local oscillator) of known frequency. An onboard signal processing computer then determines the Doppler frequency shift from the spectra of the heterodyne signal. The energy content of the Doppler spectra can also be used to determine attenuated backscatter.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Harmonic Slip-Stacking

Slip-stacking is a particle acceleration technique used at Fermilab to increase Main Injector intensity by combining two beams at the cost of longitudinal beam quality.In a conventional beam line, a single beam is typically accelerated and delivered to the experimental area without combining it with another beam

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Topological Surface and Bulk States in Dirac Semimetal Alpha-Sn Thin Films

Supported by this DOE grant, we made significant advancements in the study and application of topological surface states (TSS) in topological Dirac semimetal (TDS) α-Sn thin films. Our key findings include: (1) the successful growth of TDS α-Sn thin films via sputtering, an industry-friendly technique, on Si and InSb substrates, marking a breakthrough over previous molecular beam epitaxy methods, (2) the demonstration of enhanced damping in adjacent NiFe thin films due to the TSS of α-Sn, (3) the first observation of a strong bilinear magneto-electric resistance (BMER) effect in TDS materials at room temperature, with responses surpassing previous results, (4) the identification of quantum oscillations in α-Sn thin films associated with the TSS, revealing critical quantum transport characteristics such as Berry phase and quantum mobility, (5) the first experimental observation of negative magnetoresistance in α-Sn, and (6) the demonstration of spinorbit torque-driven, field-free magnetization switching in an α-Sn/Ag/CoFeB trilayer, achieving efficiency levels higher than conventional heavy-metal-based structures, highlighting the essential role of TSS in enabling the switching process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Bent Crystal Channeling for Optimized Beam Shadowing and Proton Extraction at Mu2e

The Mu2e experiment is designed to investigate the CLFV through the observation of a neutrinoless muon-to-electron conversion in the field of an Al nucleus. The observation of such a process would be clear evidence of physics beyond the standard model. Due to the rarity of this process, a cutting-edge, intense muon beam is required to achieve an improvement of the current single-event sensitivity by 4 orders of magnitude. To achieve this goal, a primary proton beam with 8 GeV is extracted from the Fermilab Delivery Ring using the slow resonant extraction technique. Mu2e requires ~3.6x10$^{20}$ protons-on-target to meet its goal; hence, it is crucial to minimize the extraction losses. An important source of such losses are the particles impacting on the electrostatic septum blade. A very promising solution to the problem lies in the beam shadowing scheme tested at CERN SPS. In this approach, a bent crystal is strategically placed upstream of the septum, deflecting particles from the blade at a precise angle via the phenomenon of channeling. As a result, a zone with reduced particle flux is created downstream of the crystal, safeguarding the septum anode by minimizing interactions with the beam. This work explores the optimization of beam shadowing design and the process in the manufacturing and characterization of the bent crystal sample. It emphasizes the promising role of channeling in bent crystals, and it underscores the significant potential of channeling in bent crystals to assist the Mu2e experiment.

Fedeli, Pierluigi [Ferrara U.; INFN, Ferrara] (ORC↗
DOE OSTI2021

Retrieving Tarnished Daguerreotype Content Using X-ray Fluorescence Imaging—Recent Observations on the Effect of Chemical and Electrochemical Cleaning Methods

We report a study on the effect of chemical and electrochemical cleaning of tarnished daguerreotypes observed using X-ray fluorescence (XRF) microscopy with a micro-focussed X-ray beam from a synchrotron source. It has been found that, while both techniques result in some success depending on the condition of the plate and the experimental parameters (chemical concentration, voltage, current, etc.) the effect varies, and cleaning is often incomplete. The XRF images using Hg Lα,β at an excitation energy just above the L3 edge threshold produce fine images, regardless of the treatment. This finding confirms previous observations that if the bulk of the image particles remains intact, the surface tarnish has little effect on the quality of the original daguerreotype image retrievable from XRF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1979

Detection of hairline cracks in textured silicon solar cells

Using a focused laser scanner, the optical technique described in the present paper can be used to detect hairline cracks of the type occurring in solar cells subjected to surface texturing. The technique is capable of detecting cracks of the order of a few microns, which, otherwise, can be observed only under high magnification using an optical microscope. The technique consists of scanning a solar cell with a finely focused laser beam and recording the photoresponse (short circuit current or open circuit voltage) as a function of beam position. The presence of a crack is manifested by a sharp dip in the photoresponse.

Sopori, B. L.↗