Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Standards”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Experimental analysis of thermal performance of flat plate and evacuated tube solar collectors in stationary standard and daily conditions

New comparative tests on two different types of solar collectors are presented in this paper. A standard glazed flat plate collector and an evacuated tube collector are installed in parallel and tested at the same working conditions; the evacuated collector is a direct flow through type with external compound parabolic concentrator (CPC) reflectors. Efficiency in steady-state and quasi-dynamic conditions is measured following the standard and it is compared with the input/output curves measured for the whole day. The first purpose of the present work is the comparison of results in steady-state and quasi-dynamic test methods both for flat plate and evacuated tube collectors. Besides this, the objective is to characterize and to compare the daily energy performance of these two types of collectors. An effective mean for describing and analyzing the daily performance is the so called input/output diagram, in which the collected solar energy is plotted against the daily incident solar radiation. Test runs have been performed in several conditions to reproduce different conventional uses (hot water, space heating, solar cooling). Results are also presented in terms of daily efficiency versus daily average reduced temperature difference: this allows to represent the comparative characteristics of the two collectors when operating under variable conditions, especially with wide range of incidence angles. (author)

14 SOLAR ENERGY↗

A better renewable portfolio standard

It's time to throw out our RPS, throw out our Energy Efficiency Resource Standard, throw out all our definitions of eligible technologies, and replace them all with a single, clear incentive paid to any power plant that reduces our demand for fossil resources, pro rata with the fossil energy reduction: a Fossil Energy Reduction Standard. (author)

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Restoring Faith in the bulk-power system: an early assessment of mandatory reliability standards

The driving force underlying creation of mandatory reliability standards was the prevention of widespread outages, such as those that occurred in 1965, 1977 and 2003. So far, no similar outage has occurred when an entity is in full compliance with the standards, and NERC and FERC have demonstrated that they will actively enforce compliance while aggressively pursuing entities alleged to be non-compliant. (author)

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Standardized benchmarking in the quest for orthologs

Achieving high accuracy in orthology inference is essential for many comparative, evolutionary and functional genomic analyses, yet the true evolutionary history of genes is generally unknown and orthologs are used for very different applications across phyla, requiring different precision–recall trade-offs. As a result, it is difficult to assess the performance of orthology inference methods. Here, we present a community effort to establish standards and an automated web-based service to facilitate orthology benchmarking. Using this service, we characterize 15 well-established inference methods and resources on a battery of 20 different benchmarks. Standardized benchmarking provides a way for users to identify the most effective methods for the problem at hand, sets a minimum requirement for new tools and resources, and guides the development of more accurate orthology inference methods.

59 BASIC BIOLOGICAL SCIENCES↗

Cohort-based learning for microbiome research community standards

Microbiome data standards are key to enabling data reuse, yet awareness and community adoption continue to be significant barriers to their broad implementation. The National Microbiome Data Collaborative launched an Ambassador Program based around a community learning model to broaden foundational knowledge and technical skills regarding microbiome metadata standards and best practices in data stewardship.

59 BASIC BIOLOGICAL SCIENCES↗

Search for non-standard SUSY signatures in CMS

New studies of the CMS collaboration are presented on the sensitivity to searches for non-standard signatures of particular SUSY scenarios. These signatures include non-pointing photons as well as pairs of prompt photons as expected GMSB SUSY models, as well as heavy stable charged particles produced in split supersymmetry models, long lived staus from GMSB SUSY and long lived stops in other SUSY scenarios. Detailed detector simulation is used for the study, and all relevant Standard Model background and detector effects that can mimic these special signatures are included. It is shown that with already with less than 100 pb{sup -1} the CMS sensitivity will probe an interesting as yet by data unexplored parameter range of these models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Standard electrode potential, Tafel equation, and the solvation thermodynamics

Equilibrium in the electronic subsystem across the solution-metal interface is considered to connect the standard electrode potential to the statistics of localized electronic states in solution. We argue that a correct derivation of the Nernst equation for the electrode potential requires a careful separation of the relevant time scales. An equation for the standard metal potential is derived linking it to the thermodynamics of solvation. The Anderson-Newns model for electronic delocalization between the solution and the electrode is combined with a bilinear model of solute-solvent coupling introducing nonlinear solvation into the theory of heterogeneous electron transfer. We therefore are capable of addressing the question of how nonlinear solvation affects electrochemical observables. The transfer coefficient of electrode kinetics is shown to be equal to the derivative of the free energy, or generalized force, required to shift the unoccupied electronic level in the bulk. The transfer coefficient thus directly quantifies the extent of nonlinear solvation of the redox couple. The current model allows the transfer coefficient to deviate from the value of 0.5 of the linear solvation models at zero electrode overpotential. The electrode current curves become asymmetric in respect to the change in the sign of the electrode overpotential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On Site Generation Of Low Level Odorous Standards For Validation Of FTICR-MS Gas Detector In Ambient Air

Gas sensors and analyzers can be externally calibrated with standard gases. These gas cylinders are usually difficult to obtain when it comes to low concentration standards, and their lifetime may be questionable. Starting from high concentration and diluting on site to desired lower concentrations allows to set up multi-point calibrations of the analytical device, such as an electronic nose. Volatile Organic Compounds (VOCs), including odorous chemicals, have been analyzed using Gas Chromatography (GC) often coupled with Mass Spectrometry (GC-MS), or specific olfactometric sensors. Proton Transfer Reaction (PTR) coupled with Fourier Transorm Ion Cyclotron Resonance (FTICR) MS is proposed to analyse low level of VOCs in air. FTICR MS is the most accurate and has the highest mass resolution of the MS techniques. B-Trap is a miniaturized FTICR instrument meant for real time VOCs analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Q{sub weak}{sup p} Experiment A Test for Physics Beyond the Standard Model via a Precision Measurement of the Proton Weak Charge

The Qweak collaboration is currently preparing a measurement of the proton's weak charge Q{sub w}{sup p} = (1-4 sin{sup 2} {theta}{sub w}) at the Thomas Jefferson National Accelerator Facility (TJNAF). The experiment has been designed to produce a 4.1% measurement of the weak charge, via a 2.5% measurement of the parity violating asymmetry in the number of elastically scattered 1 GeV electrons from protons, at forward angles. At the proposed precision, the experiment would produce a 0.3% measurement of the weak mixing angle at a momentum transfer of {approx_equal}0.16 GeV, making it the most precise stand alone measurement of the weak mixing angle at low momentum transfer. In combination with other parity measurements, Qweak will also provide a high precision determination of the weak charges of the up and down quarks. Our proposed measurement of Q{sub w}{sup 2} will be performed with significantly smaller statistical and systematic errors than existing low Q{sup 2} data. Any significant deviation from the Standard Model prediction at low momentum transfer (Q{sup 2}) would be a signal of new physics, whereas agreement would place new and significant constraints on possible Standard Model extensions. The experiment is currently being prepared for installation, beginning in late 2009, and data taking beginning in mid 2010.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

(g-2){sub {mu}} and physics beyond the Standard Model

A 3 {sigma} deviation has been firmly established between the experimental and the Standard Model value of the muon magnetic moment. The reliability of this deviation is emphasized. Potential contributions of very different types of physics beyond the Standard Model (SM) are compared. Supersymmetry fits particularly well. Examples of the impact and the importance of (g-2){sub {mu}} for understanding new physics in the LHC era are reviewed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Fourth Generation t-prime in Extensions of the Standard Model

We study the effects of a fourth generation t' quark in various extensions of the standard model. In the Randall-Sundrum model, the decay t'->tZ has a large branching ratio that could be detected at the Large Hadron Collider (LHC). We also look at the two-Higgs doublet models I, II and III, and note that, in the latter, the branching ratio of t'->toe, where oe is a Higgs scalar or pseudoscalar, is huge and we discuss detection at the LHC. A few comments about the minimal supersymmetric standard model are also included.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-precision Penning trap mass measurements for tests of the Standard Model

With the nowadays achievable accuracy in Penning trap mass spectrometry on short-lived exotic nuclides as well as stable atoms, precision fundamental tests can be performed, among them a test of the Standard Model, in particular with regard to the weak interaction, the CPT symmetry conservation, and the unitarity of the Cabibbo-Kobayashi-Maskawa quark mixing matrix. In addition, accurate mass values of specific nuclides are important for neutrino physics. The presently best tests of the Standard Model with high-precision Penning trap mass spectrometry will be reviewed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Extended spin symmetry and the standard model

We review unification ideas and explain the spin-extended model in this context. Its consideration is also motivated by the standard-model puzzles. With the aim of constructing a common description of discrete degrees of freedom, as spin and gauge quantum numbers, the model departs from q-bits and generalized Hilbert spaces. Physical requirements reduce the space to one that is represented by matrices. The classification of the representations is performed through Clifford algebras, with its generators associated with Lorentz and scalar symmetries. We study a reduced space with up to two spinor elements within a matrix direct product. At given dimension, the demand that Lorentz symmetry be maintained, determines the scalar symmetries, which connect to vector-and-chiral gauge-interacting fields; we review the standard-model information in each dimension. We obtain fermions and bosons, with matter fields in the fundamental representation, radiation fields in the adjoint, and scalar particles with the Higgs quantum numbers. We relate the fields' representation in such spaces to the quantum-field-theory one, and the Lagrangian. The model provides a coupling-constant definition.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The neutrino charge radius as a probe of physics beyond the standard model

In this paper, we review the search of possible physics effects beyond the standard model on the electromagnetic charge and anapole form factors, f{sub Q}(q{sup 2}) and f{sub A}(q{sup 2}), for a no massive Dirac neutrino, when these quantities are calculated in the frame of an effective electroweak Yang-Mills theory, which induces the most general SU{sub L}(2)-invariant Lorentz tensor structure of nonrenormalizable type for the WW{gamma} vertex. We found that in this frame, besides the standard model contribution, the additional contribution to f{sub Q}(q{sup 2}) and f{sub A}(q{sup 2}) (f{sub Q}{sup O{sub W}}(q{sup 2}) and f{sub A}{sup O{sub W}}(q{sup 2}), respectively) are gauge independent and finite functions of q{sup 2} after adopting a renormalization scheme. These form factors, f{sub Q}{sup O{sub W}}(q{sup 2}) and f{sub A}{sup O{sub W}}(q{sup 2}), get contribution at the one loop level only from the proper neutrino electromagnetic vertex. Besides, the relation f{sub Q}{sup eff}(q{sup 2}) = q{sup 2}f{sub A}{sup eff}(q{sup 2})(f{sub Q}{sup eff}(q{sup 2}) = f{sub Q}{sup SM}(q{sup 2})+f{sub Q}{sup O{sub W}}(q{sup 2}),f{sub A}{sup eff}(q{sup 2}) = f{sub A}{sup SM}(q{sup 2})+f{sub A}{sup O{sub W}}(q{sup 2})) is still fulfilled and hence the relation a{sub v}{sup eff} = {sup eff}/6(a{sub v}{sup eff} = a{sub v}{sup SM}+a{sub v}{sup O{sub W}}, {sup eff} = {sup SM}+ {sup O{sub W}}) is obtained, just as in the SM. Using the experimental constraint on the anomalous WW{gamma} vertex, a value for the additional contribution to the charge radius of Double-Vertical-Line {sup O{sub W}} Double-Vertical-Line Less-Than-Or-Equivalent-To 10{sup -34} cm{sup 2} is gotten, which is one order of magnitude lower than the SM value.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Radiation thermometry standards at NMIJ from −30 °C to 2800 °C

NMIJ has established a national standard scale in radiation thermometry from −30 °C to 2800 °C. At low temperatures from 160 °C down to −30 °C large aperture fluid-bath blackbodies have been constructed for the calibration of thermal infrared thermometers. In the range from 160 °C to 420 °C, the standard scale has been realized on 1.6 μm thermometers calibrated against In, Sn, and Zn blackbodies. A variable temperature blackbody using an air-bath furnace has recently been developed for direct comparison measurements of a 10 μm thermometer with a 1.6 μm thermometers up to 500 °C. In the higher range of the temperature scale, dissemination consists of three schemes: the range from 400 °C to 1100 °C by Zn, Al, Ag and Cu fixed-point blackbodies: above the Ag point by 0.9 μm and 0.65 μm thermometers: and above the Cu point by metal-carbon high-temperature fixed points.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Production and characterization of a nitrogen-implanted Fe standard to calibrate PIGE measurements

Three calibration standard was produced by ion implantation of nitrogen in samples of Armco iron (99.7% iron). The samples was irradiated with nitrogen ion beams at several different energies (between 4 keV and 40 keV), and the ion doses were adjusted to obtain an uniform depth profile, using simulations with SRIM code. Two standards, one thick and other a foil (1.62mg/cm{sup 2}), was irradiated at same time with total nominal dose of 6.6×10{sup −16} atoms/cm{sup 2} distributed in a region of 100 nm in depth, with an average concentration of 9.0% nitrogen in iron. The third sample uses the same profile, but with a small dose, 1.1×10{sup −16} atoms/cm{sup 2} and average concentration of 1.5% nitrogen. The characterization of the implanted samples was done using RBS and NRA techniques to quantification of nitrogen.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Penguin-like diagrams from the standard model

The Standard Model is highly successful in describing the interactions of leptons and quarks. There are, however, rare processes that involve higher order effects in electroweak interactions. One specific class of processes is the penguin-like diagram. Such class of diagrams involves the neutral change of quark flavours accompanied by the emission of a gluon (gluon penguin), a photon (photon penguin), a gluon and a photon (gluon-photon penguin), a Z-boson (Z penguin), or a Higgs-boson (Higgs penguin). Such diagrams do not arise at the tree level in the Standard Model. They are, however, induced by one-loop effects. In this paper, we present an exact calculation of the penguin diagram vertices in the ‘tHooft-Feynman gauge. Renormalization of the vertex is effected by a prescription by Chia and Chong which gives an expression for the counter term identical to that obtained by employing Ward-Takahashi identity. The on-shell vertex functions for the penguin diagram vertices are obtained. The various penguin diagram vertex functions are related to one another via Ward-Takahashi identity. From these, a set of relations is obtained connecting the vertex form factors of various penguin diagrams. Explicit expressions for the gluon-photon penguin vertex form factors are obtained, and their contributions to the flavor changing processes estimated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Validation of galvanomagnetic and thermomagnetic transport measurements using Standard Reference Material 3451

In the “method of four coefficients,” electrical resistivity (ρ), Seebeck coefficient (S), Hall coefficient (RH), and Nernst coefficient (Q) of a material are measured and typically fit or modeled with theoretical expressions based on Boltzmann transport theory to glean experimental insights into features of electronic structure and/or charge carrier scattering mechanisms in materials. Although well-defined and readily available reference materials exist for validating measurements of ρ and S, none currently exists for R H or Q. We show that measurements of all four transport coefficients—ρ, S, R H , and Q—can be validated using a single reference sample, namely, the low-temperature Seebeck coefficient Standard Reference Material® (SRM) 3451 (composition Bi 2 Te 3+x ) available from the National Institute for Standards and Technology (NIST) without the need for inter-laboratory sample exchange. Here, R H and Q data for NIST SRM 3451 reported here for the temperature range 80–400 K complement the data already available for ρ and S and will therefore be of interest to researchers desiring to validate new or existing galvanomagnetic and thermomagnetic transport properties measurement systems.

47 OTHER INSTRUMENTATION↗