Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Segregation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Melt and Solid-State Structures of Polydisperse Polyolefin Multiblock Copolymers

Crystallization in polydisperse ethylene-octene multiblock copolymers, polymerized via chain shuttling chemistry, is examined using two-dimensional synchrotron small- and wide-angle X-ray scattering on flow-aligned specimens. The multiblocks are composed of alternating crystalline (hard) blocks of low 1-octene content and amorphous (soft) blocks of high 1-octene content; the block lengths and the number of blocks per chain are characterized by most-probable distributions. These polymers self-assemble into lamellar domain morphologies in the melt, and the melt morphology is retained in the solid state. Despite extensive mixing between hard and soft blocks, the high crystallinity (>50%) of the hard blocks leads to an alignment of the crystallites within the domain structure, with the orthorhombic polyethylene c-axis generally perpendicular to the lamellar domain normal. The interlamellar domain spacings exhibited by the multiblocks, which exceed 100 nm, are estimated to be 5 times larger than those in near-monodisperse block copolymers having a similar chemical composition and a number-average molecular weight equivalent to the multiblock's 'constituent diblock' repeating unit. This swelling factor exceeds the value of 3 previously reported for analogous polydisperse olefin diblock copolymers, due to the lower segregation strength and enhanced phase mixing of the multiblocks studied here.

36 MATERIALS SCIENCE↗

Manipulating Interfaces through Surface Confinement of Poly(glycidyl methacrylate)-block-poly(vinyldimethylazlactone), a Dually Reactive Block Copolymer

The assembly of dually reactive, well-defined diblock copolymers incorporating the chemoselective/functional monomer, 4,4-dimethyl-2-vinylazlactone (VDMA) and the surface-reactive monomer glycidyl methacrylate (GMA) is examined to understand how competition between surface attachment and microphase segregation influences interfacial structure. Reaction of the PGMA block with surface hydroxyl groups not only anchors the copolymer to the surface, but limits chain mobility, creating brush-like structures comprising PVDMA blocks, which contain reactive azlactone groups. The block copolymers are spin coated at various solution concentrations and annealed at elevated temperature to optimize film deposition to achieve a molecularly uniform layer. The thickness and structure of the polymer thin films are investigated by ellipsometry, infrared spectroscopy, and neutron reflectometry. The results show that deposition of PGMA-b-PVDMA provides a useful route to control film thickness while preserving azlactone groups that can be further modified with biotin-poly(ethylene glycol)amine to generate designer surfaces. The method described herein offers guidance for creating highly functional surfaces, films, or coatings through the use of dually reactive block copolymers and postpolymerization modification.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Polydispersity-Driven Block Copolymer Amphiphile Self-Assembly into Prolate-Spheroid Micelles

The aqueous self-assembly behavior of polydisperse poly(ethylene oxide-b-1,4-butadiene-b-ethylene oxide) (OBO) macromolecular triblock amphiphiles is examined to discern the implications of continuous polydispersity in the hydrophobic block on the resulting aqueous micellar morphologies of otherwise monodisperse polymer surfactants. The chain length polydispersity and implicit composition polydispersity of these samples furnishes a distribution of preferred interfacial curvatures, resulting in dilute aqueous block copolymer dispersions exhibiting coexisting spherical and rod-like micelles with vesicles in a single sample with a O weight fraction, w{sub O}, of 0.18. At higher w{sub O} = 0.51-0.68, the peak in the interfacial curvature distribution shifts and we observe the formation of only American football-shaped micelles. We rationalize the formation of these anisotropically shaped aggregates based on the intrinsic distribution of preferred curvatures adopted by the polydisperse copolymer amphiphiles and on the relief of core block chain stretching by chain-length-dependent intramicellar segregation.

36 MATERIALS SCIENCE↗

Facet Dependent Disorder in the Pristine High Voltage Lithium-Manganese-Rich Cathode Material

Defects and surface reconstructions are thought to be crucial for the long term stability of high-voltage lithium-manganese-rich cathodes. Unfortunately, many of these defects arise only after electrochemical cycling which occur under harsh conditions making it difficult to fully comprehend the role they play in degrading material performance. Recently, it has been observed that defects are present even in the pristine material. This study, therefore, focuses on examining the nature of the disorder observed in pristine Li$_{1.2}$Ni$_{0.175}$Mn$_{0.525}$Co$_{0.1}$O$_2$ (LNMCO) particles. Using atomic resolution Z-contrast imaging and electron energy-loss spectroscopy measurements we show that there are indeed a significant amount of anti-site defects present in this material; with transition metals substituting on Li metal sites. Furthermore, we find a strong tendency of segregation of these types of defects towards open facets (surfaces perpendicular to the layered arrangement of atoms), rather than closed facets (surfaces parallel to the layered arrangement of atoms). First principles calculations identify anti-site defect pairs of Ni swapping with Li ions as the predominant defect in the material. Furthermore, energetically favorable swapping of Ni on the Mn sites were observed to lead to Mn depletion at open facets. Relatively, low Ni migration barriers also support the notion that Ni are the predominant cause of disorder. These insights suggests that certain facets of the LNMCO particles may be more useful for inhibiting surface reconstruction and improving the stability of these materials through careful consideration of the exposed surface.

25 ENERGY STORAGE↗

Molecular mechanism by which the nucleoid occlusion factor, SlmA, keeps cytokinesis in check

In Escherichia coli, cytokinesis is orchestrated by FtsZ, which forms a Z-ring to drive septation. Spatial and temporal control of Z-ring formation is achieved by the Min and nucleoid occlusion (NO) systems. Unlike the wellstudied Min system, less is known about the anti-DNA guillotining NO process. Here, we describe studies addressing the molecular mechanism of SlmA (synthetic lethal with a defective Min system)-mediated NO. SlmA contains a TetR-like DNA-binding fold, and chromatin immunoprecipitation analyses show that SlmA-binding sites are dispersed on the chromosome except the Ter region, which segregates immediately before septation. SlmA binds DNA and FtsZ simultaneously, and the SlmA–FtsZ structure reveals that two FtsZ molecules sandwich a SlmA dimer. In this complex, FtsZ can still bind GTP and form protofilaments, but the separated protofilaments are forced into an anti-parallel arrangement. This suggests that SlmA may alter FtsZ polymer assembly. Indeed, electron microscopy data, showing that SlmA–DNA disrupts the formation of normal FtsZ polymers and induces distinct spiral structures, supports this. Thus, the combined data reveal how SlmA derails Z-ring formation at the correct place and time to effect NO.

59 BASIC BIOLOGICAL SCIENCES↗

Structural analysis of sonochemically prepared PtRu versus Johnson Matthey PtRu in operating direct methanol fuel cells

Sonochemically prepared PtRu (3 : 1) and Johnson Matthey PtRu (1 : 1) were analyzed by X-ray absorption spectroscopy in operating liquid feed direct methanol fuel cells. The total metal loadings were 4 mg cm{sup -2} unsupported catalysts at the anode and cathode of the membrane electrode assembly. Ex situ XRD lattice parameter analysis indicates partial segregation of the Ru from the PtRu fcc alloy in both catalysts. A comparison of the in situ DMFC EXAFS to that of the as-received catalyst shows that catalyst restructuring during DMFC operation increases the total metal coordination numbers. A combined analysis of XRD determined grain sizes and lattice parameters, ex situ and in situ EXAFS analysis, and XRF of the as-received catalysts enables determination of the catalyst shell composition. The multi-spectrum analysis shows that the core size increases during DMFC operation by reduction of Pt oxides and incorporation of Pt into the core. This increases the mole fraction of Ru in the catalyst shell structure.

30 DIRECT ENERGY CONVERSION↗

Using supported Au nanoparticles as starting material for preparing uniform Au/Pd bimetallic catalysts

One of the best methods for producing bulk homogeneous (composition) supported bimetallic AuPd clusters involves the immobilization of a protected Au seed followed by the addition of Pd. This paper investigates the importance of this gold seed in controlling the resulting bimetallic AuPd clusters structures, sizes and catalytic activities by investigating three different gold seeds. Uniform Au-Pd alloy were obtained when a steric/electrostatic protecting group, poly(vinyl alcohol) (PVA), was used to form the gold clusters on activated carbon (AC). In contrast Au/AC precursors prepared using Au nanoparticles with only electrostatic stabilization (tetrakis(hydroxypropyl)phosphonium chloride (THPC)), or no stabilization (magnetron sputtering) produced inhomogeneous alloys and segregation of the gold and palladium. The uniform alloyed catalyst (Pd{at}Au{sub PVA}/AC) is the most active and selective catalyst, while the inhomogenous catalysts are less active and selective. Further study of the PVA protected Au clusters revealed that the amount of PVA used is also critical for the preparation of uniform alloyed catalyst, their stability, and their catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Directed Self-assembly of Nanoparticles at the Polymer Surface by Highly Compressible Supercritical Carbon Dioxide

We report a versatile route for self-assembly of polymer-soluble nanoparticles at the polymer surface using highly compressible supercritical carbon dioxide (scCO{sub 2}). Polystyrene and poly(methyl methacrylate)-based nanocomposite thin films with functionalized polyhedral oligomeric silsesquioxane and phenyl C{sub 61} butyric acid methyl ester nanoparticles were prepared on Si substrates and exposed to scCO{sub 2} at different pressures under the isothermal condition of 36 C. The resultant structures could be then preserved by the vitrification process of the glassy polymers via quick pressure quench to atmospheric pressure and subsequently characterized by using various surface sensitive experimental techniques in air. We found that the surface segregation of these nanoparticles is induced in the close vicinity of P = 8.2 MPa where the excess absorption of the fluid into the polymers maximizes. However, when the film thickness becomes less than about 4R{sub g} thick (where R{sub g} is the radius of polymer gyration), the uniform dispersion of the nanoparticles is favorable instead even at the same CO{sub 2} conditions. We clarify that the phase transition is correlated with the emergence of a concentration gradient of the fluid at the polymer/CO{sub 2} interface and is a general phenomenon for different polymer-nanoparticle interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of Shocked Beryllium

Beryllium metal has many excellent structural properties in addition to its unique radiation characteristics, including: high elastic modulus, low Poisson's ratio, low density, and high melting point. However, it suffers from several major mechanical drawbacks: 1) high anisotropy - due to its hexagonal lattice structure and its susceptibility to crystallographic texturing; 2) susceptibility to impurity-induced fracture - due to grain boundary segregation; and 3) low intrinsic ductility at ambient temperatures thereby limiting fabricability. While large ductility results from deformation under the conditions of compression, the material can exhibit a brittle behavior under tension. Furthermore, there is a brittle to ductile transition at approximately 200 C under tensile conditions. While numerous studies have investigated the low-strain-rate constitutive response of beryllium, the combined influence of high strain rate and temperature on the mechanical behavior and microstructure of beryllium has received limited attention over the last 40 years. Prior studies have focused on tensile loading behavior, or limited conditions of dynamic strain rate and/or temperature. The beryllium used in this study was Grade S200-F (Brush Wellman, Inc., Elmore, OH) material. The work focused on high strain rate deformation and examine the validity of constitutive models in deformation rate regimes, including shock, the experiments were modeled using a Lagrangian hydrocode. Two constitutive strength (plasticity) models, the Preston-Tonks-Wallace (PTW) and Mechanical Threshold Stress (MTS) models, were calibrated using the same set of quasi-static and Hopkinson bar data taken at temperatures from 77K to 873K and strain rates from 0.001/sec to 4300/sec. In spite of being calibrated on the same data, the two models give noticeably different results when compared with the measured wave profiles. These high strain rate tests were conducted using both explosive drive and a gas gun to accelerate the material. Preliminary analysis of the results appears to indicate that, if fractured by the initial shock loading, the S200F Be remains sufficiently intact to support a shear stress following partial release and subsequent shock re-loading of the material. Additional 'arrested' drive shots were designed and tested to minimize the reflected tensile pulse in the sample. These tests were done to both validate the model and to put large shock induced compressive loads into the beryllium sample.

36 MATERIALS SCIENCE↗

P-Induced Nanocrystallite Dispersion in Amorphous-Nanocrystalline Mixed-Phase Si:H Thin Films

The effects of P doping on the nanocrystalline formation in mixed-phase Si:H thin films were investigated using secondary-ion mass spectrometry, Raman spectroscopy, atomic force microscopy, cross-sectional transmission electron microscopy, and scanning Kelvin probe microscopy. We found that Si nanocrystallites in the intrinsic and weakly P-doped materials aggregate to form cone-shaped structures. The local work function of the nanocrystalline aggregation areas is larger than the surrounding amorphous areas. Increasing the P-doping level requires an increased hydrogen dilution to reach the similar Raman crystallinity. The nanocrystalline aggregation disappears in the heavily P-doped materials, but isolated nanocrystallites appear. The effect of P-doping on the nanostructure is explained with the coverage of P-related radicals on the existing nanocrystalline surface during the deposition and the P segregation in grain boundaries, which prevent new nucleation on the surface of existing nanocrystallites.

14 SOLAR ENERGY↗

Electronic and atomic structures of Ti{sub 1-x}Al{sub x}N thin films related to their damage behavior

Ti and Al K-edge x-ray absorption spectroscopy is used to investigate the electronic structure of Ti{sub 1-x}Al{sub x}N thin films deposited by reactive magnetron sputtering. The experimental near edge spectra of TiN and AlN are interpreted in the light of unoccupied density of state band structure calculations. The comparison of the structural parameters derived from x-ray absorption fine structure and x-ray diffraction reveals segregation between Al-rich and Ti-rich domains within the Ti{sub 1-x}Al{sub x}N films. Whereas x-ray diffraction probes only the crystallized domains, the structural information derived from extended x-ray absorption fine structure analysis turns on both crystalline and grain boundaries. The results are discussed by considering the damage behavior of the films depending on the composition.

36 MATERIALS SCIENCE↗

Structural features of bicomponent dust Coulomb balls formed by the superposition of fields of different origin in plasma

A binary mixture of dust particles in plasma which are in an external electrostatic harmonic confining field as well as in the field consisting of gravitational, thermophoretic, and electrostatic force is simulated. The interparticle interaction is described by the Yukawa isotropic pair potential. The structural properties of the binary mixture of particles depending on composition are investigated. The segregation features of a system of particles of two species under the conditions of recent experiments on Coulomb ball formation are studied. It is shown that particles form a shell structure in which every shell contains only its own species of particles; in so doing, smaller-sized particles make up outer shells with respect to larger-sized particles. When the size difference between the particles becomes more and more pronounced, they are spatially separated up to the formation of two independent Coulomb balls.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of molecular beam epitaxy growth conditions on the Bi content of GaAs{sub 1-x}Bi{sub x}

We describe how the Bi content of GaAs{sub 1-x}Bi{sub x} epilayers grown on GaAs can be controlled by the growth conditions in molecular beam epitaxy. Nonstandard growth conditions are required because of the strong tendency for Bi to surface segregate under usual growth conditions for GaAs. A maximum Bi content of 10% is achieved at low substrate temperature and low arsenic pressure, as inferred from x-ray diffraction measurements. A model for bismuth incorporation is proposed that fits a large body of experimental data on Bi content for a wide range of growth conditions. Low growth rates are found to facilitate the growth of bismide alloys with a low density of Bi droplets.

36 MATERIALS SCIENCE↗

On PbTiO{sub 3}-(111)-Pt interfacial layers and their x-ray photoelectron spectroscopy signature

In this work emphasis is placed on the investigation of interfacial layers between sol-gel processed PbTiO{sub 3} (PTO) thin films and (111)Pt terminated silicon substrates. The methods used are x-ray diffraction, x-ray photoelectron spectroscopy (XPS) combined with depth profiling, and atomic force microscopy (AFM). In order to avoid artifacts related to ion bombardment, e.g., reduction of Pb ions and preferential sputtering, gentle argon ion bombardment conditions were first derived. AFM investigations of native and ion bombarded films at different stages of depth profiling show that the films are homogenously sputtered, whereby the film roughness remains practically unchanged in the course of sputtering. An annealing treatment at 550 deg. C under reducing atmosphere was used to provoke the formation of an interfacial intermetallic (111)Pt{sub x}Pb phase, which is shown to coexist with an amorphous oxide film. This could allow us to establish the XPS signature of the intermetallic phase. A negative shift of the Pt (4f) binding energy and a large full width at half maximum of the Pb (4f) peak are the attributes of this signature. PTO-film annealing in air at temperatures between 350 and 600 deg. C leads to the formation of the perovskite phase, starting at 500 deg. C, directly from the amorphous phase. Based on its derived XPS signature it is shown that the intermetallic phase still exists at the interface with variable thickness depending on the annealing temperature. The pronounced (111) texture of the PTO-crystallized films is thought to be the direct consequence of this intermetallic template layer. It is also shown that the outermost surface of the PTO film is enriched with PbO as a result of segregation phenomena.

36 MATERIALS SCIENCE↗

Phase separation in SiGe nanocrystals embedded in SiO{sub 2} matrix during high temperature annealing

SiGe nanocrystals have been formed in SiO{sub 2} matrix by cosputtering Si, Ge, and SiO{sub 2} independently on Si substrate. Effects of the annealing time and temperature on structural and compositional properties are studied by transmission electron microscopy, x-ray diffraction (XRD), and Raman spectroscopy measurements. It is observed that Ge-rich Si{sub (1-x)}Ge{sub x} nanocrystals do not hold their compositional uniformity when annealed at high temperatures for enough long time. A segregation process leading to separation of Ge and Si atoms from each other takes place. This process has been evidenced by a double peak formation in the XRD and Raman spectra. We attributed this phase separation to the differences in atomic size, surface energy, and surface diffusion disparity between Si and Ge atoms leading to the formation of nonhomogenous structure consist of a Si-rich SiGe core covered by a Ge-rich SiGe shell. This experimental observation is consistent with the result of reported theoretical and simulation methods.

36 MATERIALS SCIENCE↗

Origin of high strength and nanophotonic properties of crab shell (Paralithodes camtschaticus)

Understanding biomaterial is very important for superior material development. Here, we report structural and nanophotonic properties of crab shell. The fibrous shell is composed of nanocrystalline calcite, which gives the structure very high strength. Scanning electron microscope cross section and energy dispersive x-ray shows top surface (reddish) is fibrous with metal nanoparticle segregation, while the bottom layer is composed of layered nanohole array similar to air-dielectric photonic lattice structure. The air-dielectric nanohole arrays are disordered but correlated with fractal dimension >1 and able to block infrared. Nanocrystalline calcite and metal nanoparticles can also block extreme level of UV.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Room-temperature ferromagneticlike behavior in Mn-implanted and postannealed InAs layers deposited by molecular beam epitaxy

We report on the magnetic and structural properties of Ar- and Mn-implanted InAs epitaxial films grown on GaAs (100) by molecular beam epitaxy and the effect of rapid thermal annealing (RTA) for 30 s at 750 deg. C. Channeling particle induced x-ray emission (PIXE) experiments reveal that after Mn implantation almost all Mn atoms are substitutional in the In site of the InAs lattice, like in a diluted magnetic semiconductor. All of these samples show diamagnetic behavior. However, after RTA treatment the Mn-InAs films exhibit room-temperature magnetism. According to PIXE measurements the Mn atoms are no longer substitutional. When the same set of experiments was performed with Ar as implantation ion, all of the layers present diamagnetism without exception. This indicates that the appearance of room-temperature ferromagneticlike behavior in the Mn-InAs-RTA layer is not related to lattice disorder produced during implantation but to a Mn reaction produced after a short thermal treatment. X-ray diffraction patterns and Rutherford backscattering measurements evidence the segregation of an oxygen-deficient MnO{sub 2} phase (nominally MnO{sub 1.94}) in the Mn-InAs-RTA epitaxial layers which might be the origin of the room-temperature ferromagneticlike response observed.

36 MATERIALS SCIENCE↗

Effect of hydration on the structure of caveolae membranes

In situ energy dispersive x-ray diffraction was used to investigate the effect of hydration on the structure of caveolae membranes. The structure of caveolae membrane was found to be strongly dependent on hydration. At low hydration two lamellar phases with distinct repeat spacings were found to coexist with segregated cholesterol crystallites. Upon hydration, the lamellar phases did swell, while diffraction peak of cholesterol crystals disappeared suggesting that cholesterol molecules redistributed homogeneously within the caveolae membrane. At full hydration, unbinding of caveolae membrane occurred. Upon dehydration the system returned to the bound state, demonstrating that the unbinding transition is fully reversible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗