SEARCH · Engineering Papers

Results for “Reporting Format”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Process Feasibility Study in Support of Silicon Material, Task 1

During this reporting period, major activies were devoted to process system properties, chemical engineering and economic analyses. Analyses of process system properties was continued for materials involved in the alternate processes under consideration for solar cell grade silicon. The following property data are reported for silicon tetrafluoride: critical constants, vapor pressure, heat of varporization, heat capacity, density, surface tension, viscosity, thermal conductivity, heat of formation and Gibb's free energy of formation. Chemical engineering analysis of the BCL process was continued with primary efforts being devoted to the preliminary process design. Status and progress are reported for base case conditions; process flow diagram; reaction chemistry; material and energy balances; and major process equipment design.

Li, K. Y.↗

NASA NTRS1997

Nitrogen sulfide in giant molecular clouds

We report a survey for nitrogen sulfide (NS) toward regions of massive star formation. NS was observed by means of its 2 pi 1/2, J = 3/2 --> 1/2, J = 5/2 --> 3/2, and J = 7/2 --> 5/2 transitions at 69, 115, and 161 GHz, respectively, and was detected toward 12 of 14 giant molecular clouds (GMCs) observed. Analysis of the hyperfine component relative line strengths suggests that NS emission is optically thin toward these sources, with the possible exception of Sgr B2(M). The fractional abundance of NS relative to molecular hydrogen is best defined for the Orion molecular cloud, where it is typically (1-4) x 10(-10), which is about an order of magnitude larger than found by some recent gas-phase chemistry models developed for quiescent clouds. Toward OMC-1, the NS integrated intensity is strongly peaked toward KL, but also extends all along the Orion ridge, resembling the distribution of SO and CH3OH. We have identified a spectral feature seen toward several sources as the ortho-NKK = 4(04) --> 3(13) J = 3 --> 2, fine-structure component of methylene (CH2; cf. Hollis, Jewell, & Lovas). We also report the first detection of the SO+ 2 pi 1/2, J = 3/2 --> 1/2, parity-e transition toward W51(MS) and L134N.

NASA Discipline Exobiology↗

NASA NTRS2020

2MASS J15491331-3539118: a new low-mass wide companionof the GQ Lup system

Substellar companions at wide separation around stars hosting planets or brown dwarfs (BDs) yet close enough for their formation in the circumstellar disc are of special interest. In this Letter we report the discovery of a wide (projected separation ~16".0, or 2400AU, and position angle 114.61°) companion of the GQLup A-B system, most likely gravitationally bound to it. A VLT/X-shooter spectrum shows that this star, 2MASS J15491331-3539118, is a bonafide low-mass (~0.15 M(ʘ) ) young stellar object (YSO) with stellar and accretion/ejection properties typical of Lupus YSOs of similar mass, and with kinematics consistent with that of the GQLup A-B system. A possible scenario for the formation of the triple system is that GQ Lup A and 2MASS J15491331-3539118 formed by fragmentation of a turbulent core in the Lup I filament, while GQ Lup B, the BD companion of GQ Lup A at 0".7, formed in situ by the fragmentation of the circumprimary disc. The recent discoveries that stars form along cloud filaments would favour the scenario of turbulent fragmentation for the formation of GQ Lup A and 2MASS J15491331-3539118.

J. M. Alcalá↗

NASA NTRS2007

"Bursty" Reconnection Following Solar Eruptions: MHD Simulations and Comparison with Observations

Posteruptive arcades are frequently seen in the aftermath of coronal mass ejections (CMEs). The formation of these loops at successively higher altitudes, coupled with the classic "two-ribbon" flare seen in H-alpha, are interpreted as reconnection of the coronal magnetic field that has been dragged outward by the CME. White-light observations of "rays," which have been interpreted as being coincident with the current sheet at the reconnection site underneath the erupting CME, also provide evidence for its occurrence. "Blobs" occasionally seen within these rays suggest an even richer level of structure. In this report, we present numerical simulations that reproduce both the observed rays and the formation and evolution of the blobs. We compare their properties with SOHO/LASCO observations of similar structures, and relate their formation to standard theories of reconnection,

Riley, Pete↗

NASA NTRS2008

"Built-In" Action/Issues Tracking and Post-Ops Analysis Tool for Realtime Console Operations

Marshall Space Flight Center's (MSFC) Payload Operations Integration Center (POIC) for the International Space Station (ISS) uses a number of formal databases to manage and track flight plan changes, onboard and ground equipment anomalies, and other events. However, individual console positions encounter many action items and/or occurrences that don't fit neatly into the databases, and while console logs are comprehensive, manual or automated searches do not always yield consistent results. The Payload Communications Manager (PAYCOM) team, whose members speak directly with the ISS onboard crew with respect to NASA payload operations, has found a creative way to reformat a mandatory Daily Report to organize action items, standing reminders, significant events, and other comments. While the report keeps others appraised of PAYCOMs activities and issues of the moment, the format makes it easy to capture very brief summaries of the items in a "Roll Off Matrix", including start and stop dates, resolution, and possible applicability to future ops. The matrix provides accountability for all action items, gives direct insight into the issues surrounding various payloads and methods of dealing with them, yields indirect information on PAYCOM priorities and processes, and provides a roadmap that makes it easier to get back to extensive details if needed. This paper describes how the ISS PAYCOM Daily Report and Roll Off Matrix are organized, used, and inter-related to each other and the PAYCOM operations log. While the application is for a manned vehicle, the concepts could apply in a wide spectrum of operational settings.

Scott, David W.↗

NASA NTRS2005

Ar-Ar and I-Xe Ages and the Thermal History of IAB Meteorites

Studies of several samples of the large Caddo County IAB iron meteorite reveal andesitic material, enriched in Si, Na, Al and Ca, which is essentially unique among meteorites. This material is believed to have formed from a chondritic source by partial melting and to have further segregated by grain coarsening. Such an origin implies extended metamorphism of the IAB parent body. New Ar-39- Ar-40 ages for silicate from three different Caddo samples are consistent with a common age of 4.50-4.51 Gyr ago. Less well defined Ar-Ar degassing ages for inclusions from two other IABs, EET8333 and Udei Station, are approx.4.32 Gyr, whereas the age for Campo del Cielo varies considerably over approx.3.23-4.56 Gyr. New I-129-Xe-129 ages for Caddo County and EET8333 are 4557.9+/-0.1 Myr and 4557-4560 Myr, respectively, relative to an age of 4562.3 Myr for Shallowater. Considering all reported Ar-Ar degassing ages for IABs and related winonaites, the range is approx.4.32-4.53 Gyr, but several IABs give similar Ar ages of 4.50-4.52 Gyr. We interpret these older Ar ages to represent cooling after the time of last significant metamorphism on the parent body, and the younger ages to represent later 40Ar diffusion loss. The older Ar-Ar ages for IABs are similar to Sm-Nd and Rb-Sr isochron ages reported in the literature for Caddo County. Considering the possibility that IAB parent body formation was followed by impact disruption, reassembly, and metamorphism (e.g., Benedix et al. 2000), the Ar-Ar ages and IAB cooling rates deduced from Ni concentration profiles in IAB metal (Herpfer et al., 1994) are consistent if the time of the post-assembly metamorphism was as late as approx.4.53 Gyr ago. However, I-Xe ages reported for some IABs define much older ages of approx.4558-4566 Myr, which cannot easily be reconciled with the much younger Ar-Ar and Sm-Nd ages. An explanation for the difference in radiometric ages of IABs may reside in combinations of the following: a) I-Xe ages have very high closure temperatures and were not reset during metamorphism approx.4.53 Gyr ago; b) a bias exists in the 40K decay constants which makes these Ar-Ar ages approx.30 Myr too young; c) the reported Sm-Nd and Rb-Sr ages for Caddo are in error by amounts equal to or exceeding their reported 2-sigma uncertainties; and d) about 30 Myr after the initial heating that produced differentiation of Caddo silicate and mixing of silicate and metal, a mild metamorphism of the IAB parent body reset the Ar-Ar ages.

Bogard, Donald D.↗

DOE OSTI2025

Ligand‐Induced Crystallization Control in MAPbBr 3 Hybrid Perovskites for High Quality Nanostructured Films

AbstractControlling the formation of hybrid perovskite thin films is crucial in obtaining high‐performance optoelectronic devices, since factors like morphology and film thickness have a profound impact on a film's functionality. For light‐emitting applications grain sizes in the sub‐micrometer‐range have previously shown enhanced brightness. It is therefore crucial to develop simple, yet reliable methods to produce such films. Here, a solution‐based synthesis protocol for the on‐substrate formation of MAPbBr3 (MA = methylammonium) nanostructures by adding the bifunctional rac‐3‐aminobutyric acid to the precursor solution is reported. This synthesis route improves key optical properties such as photoluminescence quantum yields and life times of excited states by inducing a controlled slow‐down of the film formation and suppressing agglomeration effects. In situ spectroscopy reveals a delayed and slowed down crystallization process, which achieves synthesis of perovskite structures with much reduced defect densities. Further, aggregation can be controlled by the amount of amino acid added and adjusting the synthesis protocol allows to produce cubic crystallites with targeted size from nanometer to micrometer scales. The nanocrystalline MAPbBr3 samples show enhanced amplified spontaneous emission (ASE) intensities, reduced ASE thresholds and purer ASE signals, compared to pristine films, even under intense optical driving, making them promising structures for lasing applications.

36 MATERIALS SCIENCE↗

NASA NTRS1993

X ray emission from Wolf-Rayet stars with recurrent dust formation

We were granted a ROSAT observation of the Wolf-Rayet star WR 137 (equals HD 192641) to test a proposed mechanism for producing the infrared variability reported by Williams et al. (1987). These studies showed one clear infrared outburst preceded by what may be the dimming of a previous outburst. The recurrent dust formation model was put forward by Williams et al. (1990) to account for similar variability seen in WR 140, which varies in both the infrared and X-ray bands. The detected X-ray flux from WR 140 was observed to decrease from its normally high (for Wolf-Rayet stars) level as the infrared flux increased. Observation of two apparently-periodic infrared outbursts led to the hypothesis that WR 140 had an O star companion in an eccentric orbit, and that the increase in infrared flux came from a dust formation episode triggered by the compression of the O star and Wolf-Rayet star winds. The absorption of the X-rays by the increased material explained the decrease in flux at those wavelengths. If the infrared variability in WR 137 were caused by a similar interaction of the Wolf-Rayet star with a companion, we might expect that WR 137 would show corresponding X-ray variability and an X-ray luminosity somewhat higher than typical WC stars, as well as a phase-dependent non-thermal X-ray spectrum. Our goals in this study were to obtain luminosity estimates from our counting rates for comparison with previous observations of WR 137 and other WC class stars, especially WR 140; to compare the luminosity with the IR lightcurve; and to characterize the spectral shape of the X-ray emission, including the column density.

Rawley, Gayle L.↗

DOE OSTI2021

Unraveling the formation mechanism of NaCoPO 4 polymorphs

Phosphate compounds are one of the attractive classes of cathodes for their potential application in rechargeable Na-ion batteries (NIBs) due to their high insertion voltages and stabilities. Unlike olivine-LiMPO 4 (M = Fe, Mn, Co, Ni) cathodes, maricite-NaMPO 4 phases are electrochemically inactive due to lack of sodium diffusion channels. Interestingly, cobalt bearing compounds exhibit rich polymorphism (α-, β-, ABW- and Red-NaCoPO 4 ). However, the preparation of NaCoPO 4 single phases is challenging due to their closer enthalpies of formation. In this study, we have attempted to understand the formation mechanism of NaCoPO 4 polymorphs during solid state reaction using two different cobalt precursors (Co(OH) 2 and CoCO 3 ). The temperature dependent in-situ powder X-ray Diffraction (PXRD) studies showed the formation of β-NaCoPO 4 at a much lower temperature compared to the one reported in the literature, whilst we have discovered a new high temperature polymorph gamma-NaCoPO 4 . The choice of precursors was also found to be important for the preparation of ABW-NaCoPO 4 , i.e., the rapid decomposition of Co(OH) 2 has resulted in its formation whilst the high stability of CoCO 3 prohibited the same. The order of the formation of the NaCoPO 4 polymorphs during heating was found to be ABW→β→α →$\gamma$. During normal cooling, gamma-NaCoPO 4 transformed primarily into alpha-polymorph whilst quenching in liquid N-2 resulted in the formation of β-NaCoPO 4 The as-synthesized beta- and ABW-NaCoPO 4 phases exhibited high sodium (de)-intercalation voltages (similar to 4.2 and 4.5 V vs. Na + /Na 0 , respectively), albeit with limited reversible capacities. This study is expected to open new avenues to harvest metastable polymorphs based on other transition metals (Fe, Mn and Ni).

25 ENERGY STORAGE↗

DOE OSTI2024

Comparisons Between Resolved Star Formation Rate and Gas Tracers in the Strongly Lensed Galaxy SDSS J0901+1814 at Cosmic Noon

We report new radio observations of SDSS J090122.37+181432.3, a strongly lensed star-forming galaxy at $z=2.26$. We image 1.4 GHz (L-band) and 3 GHz (S-band) continuum using the VLA and 1.2 mm (band 6) continuum with ALMA, in addition to the CO(7-6) and CI(${\rm ^3P_2\rightarrow ^3\!P_1}$) lines, all at $\lesssim1.^{\prime\prime}7$ resolution. Based on the VLA integrated flux densities, we decompose the radio spectrum into its free-free (FF) and non-thermal components. The infrared-radio correlation (IRRC) parameter $q_{\rm TIR}=2.65_{-0.31}^{+0.24}$ is consistent with expectations for star forming galaxies. We obtain radio continuum-derived SFRs that are free of dust extinction, finding $\rm {620}_{-220}^{+280}\,M_\odot\,yr^{-1}$, $\rm {230}_{-160}^{+570}\,M_\odot\,yr^{-1}$, and $\rm {280}_{-120}^{+460}\,M_\odot\,yr^{-1}$ from the FF emission, non-thermal emission, and when accounting for both emission processes, respectively, in agreement with previous results. We estimate the gas mass from the CI(${\rm ^3P_2\rightarrow ^3\!P_1}$) line as $M_{\rm gas}=(1.2\pm0.2)\times10^{11}\,M_\odot$, which is consistent with prior CO(1-0)-derived gas masses. Using our new IR and radio continuum data to map the SFR, we assess the dependence of the Schmidt-Kennicutt relation on choices of SFR and gas tracer for $\sim{\rm kpc}$ scales. The different SFR tracers yield different slopes, with the IR being the steepest, potentially due to highly obscured star formation in J0901. The radio continuum maps have the lowest slopes and overall fidelity for mapping the SFR, despite producing consistent total SFRs. We also find that the Schmidt-Kennicutt relation slope is flattest when using CO(7-6) or CI(${\rm ^3P_2\rightarrow ^3\!P_1}$) to trace gas mass, suggesting that those transitions are not suitable for tracing the bulk molecular gas in galaxies like J0901.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS2002

The effect of exercise and rest duration on the generation of venous gas bubbles at altitude

BACKGROUND: Decompression, as occurs with aviators and astronauts undergoing high altitude operations or with deep-sea divers returning to surface, can cause gas bubbles to form within the organism. Pressure changes to evoke bubble formation in vivo during depressurization are several orders of magnitude less than those required for gas phase formation in vitro in quiescent liquids. Preformed micronuclei acting as "seeds" have been proposed, dating back to the 1940's. These tissue gas micronuclei have been attributed to a minute gas phase located in hydrophobic cavities, surfactant-stabilized microbubbles, or arising from musculoskeletal activity. The lifetimes of these micronuclei have been presumed to be from a few minutes to several weeks. HYPOTHESIS: The greatest incidence of venous gas emboli (VGE) will be detected by precordial Doppler ultrasound with depressurization immediately following lower extremity exercise, with progressively reduced levels of VGE observed as the interval from exercise to depressurization lengthens. METHODS: In a blinded cross-over design, 20 individuals (15 men, 5 women) at sea level exercised by performing knee-bend squats (150 knee flexes over 10 min, 235-kcal x h(-1)) either at the beginning, middle, or end of a 2-h chair-rest period without an oxygen prebreathe. Seated subjects were then depressurized to 6.2 psia (6,706 m or 22,000 ft altitude equivalent) for 120 min with no exercise performed at altitude. RESULTS: Of the 20 subjects with VGE in the pulmonary artery, 10 demonstrated a greater incidence of bubbles with exercise performed just prior to depressurization, compared with decreasing bubble grades and incidence as the interval of rest increased prior to depressurization. No decompression illness was reported. CONCLUSIONS: There is a significant increase in decompression-induced bubble formation at 6.2 psia when lower extremity exercise is performed just prior to depressurization as compared with longer rest intervals. Analysis indicated that micronuclei half-life is on the order of an hour under these hypobaric conditions.

Controlled Clinical Trial↗

DOE OSTI2020

The timing of lunar solidification and mantle overturn recorded in ferroan anorthosite 62237

Ferroan anorthosite suite (FAS) rocks are widely interpreted to represent primordial lunar crust. Despite their importance in pinpointing the timing of lunar crust formation, robust chronological investigations for this rock type are scarce. Here, we report the Ar-Ar, Rb-Sr, and Sm-Nd isotopic systematics for the FAS troctolitic anorthosite 62237. The Ar-Ar isotopic system has been reset by a thermal event at 3710 ± 48 Ma, and the Rb-Sr isotopic systematics has been disturbed such that a Rb-Sr isochron age cannot be determined. However, an internal isochron for the Sm-Nd isotopic system has yielded an age of 4350 ± 73 Ma (MSWD = 2.0) with an initial ε 143 Nd CHUR of -0.53 ± 0.26. The mineral and whole-rock fractions of 62237 plot on the same internal isochron as FAS sample 60025. The combined datasets define an age of 4372 ± 35 Ma (MSWD = 4.0) with an initial ε 143 Nd CHUR of -0.17 ± 0.22. Literature Sm-Nd data for FAS and Mg-suite whole-rocks also plot on the 60025-62237 isochron. The coherence of data from both FAS and Mg-suite rocks examined thus far suggests that both rock suites formed contemporaneously from identical, or nearly identical, sources. In addition, the concordance of FAS and Mg-suite ages suggests that primordial crust solidification either involved both magmatic suites, or that Mg-suite magmatism was contemporaneous with FAS magmatism within resolution of the Sm-Nd chronometer. The ages for FAS and Mg-suite also coincide with the formation ages of the mare basalt source regions and urKREEP. Ferroan anorthosite suite rocks and urKREEP are thought to represent primordial LMO solidification products, whereas Mg-suite and the mare basalt source regions are argued to represent mixtures of various LMO crystallization products that were formed during density-driven overturn of the LMO. The concordance of ages implies that the 4372 ± 35 Ma Sm-Nd isochron records the age of mantle overturn, and that overturn occurred during, or shortly after, solidification of the LMO.

58 GEOSCIENCES↗

NASA NTRSDate not supplied

The Nucleosynthetic Heritage of Bennu

The OSIRIS-REx mission sampled the B-type asteroid Bennu and delivered 121.6 g of material to Earth in September 2023. Nucleosynthetic isotope variations are powerful tracers that can be used to establish relationships between different meteorite groups and the returned samples. They can also constrain the samples’ nucleosynthetic heritage, as well as mixing and reservoir formation in the protoplanetary disk. Nucleosynthetic variations reflect the heterogeneous distribution of isotopically distinct dust in the disk, and as such, they provide evidence for the formation of meteorite parent bodies from isotopically distinct dust reservoirs. They are thus also a means to identify exogenous clasts in Bennu materials. Here, we report Ti and Fe isotope data obtained from Bennu samples and carbonaceous chondrites. We also present Ti isotope data for hand-picked matrix from CV and CR chondrites. An isotopic dataset was obtained on aggregate sample OREX-803015-100 consisting of particles typically <500 μm; therefore, its composition represents an average for Bennu materials. A 20.66 mg aliquot was dissolved at Washington University, St. Louis. From this, 5 mg was analysed for Ti and Fe isotopes on a NeptunePlus MC-ICPMS at ETH Zurich; data from a separate aliquot, analysed at Lawrence Livermore National Laboratory, are reported in a companion abstract. Our results demonstrate a close relationship of Bennu to CI and Ryugu samples and therefore a formation outside the snowline, as hypothesized by the mission. Furthermore, the 50 Ti data from the CV and CR matrix fall consistently below the CI and Bennu values, indicating the presence of a uniform matrix mixed with ⁓0.1–0.7% of refractory inclusions in CIs and Bennu.

M. Schönbächler↗

DOE OSTI2023

Colloidal Clusters and Networks Formed by Oppositely Charged Nanoparticles with Varying Stiffnesses

Colloidal clusters and gels are ubiquitous in science and technology. Particle softness has a strong effect on interparticle interactions; however, our understanding of the role of this factor in the formation of colloidal clusters and gels is only beginning to evolve. Here, we report the results of experimental and simulation studies of the impact of particle softness on the assembly of clusters and networks from mixtures of oppositely charged polymer nanoparticles (NPs). Experiments were performed below or above the polymer glass transition temperature, at which the interaction potential and adhesive forces between the NPs were significantly varied. Hard NPs assembled in fractal clusters that subsequently organized in a kinetically arrested colloidal gel, while soft NPs formed dense precipitating aggregates, due to the NP deformation and the decreased interparticle distance. Importantly, interactions of hard and soft NPs led to the formation of discrete precipitating NP aggregates at a relatively low volume fraction of soft NPs. A phenomenological model was developed for interactions of oppositely charged NPs with varying softnesses. Furthermore, the experimental results were in agreement with molecular dynamics simulations based on the model. This work provides insight on interparticle interactions before, during, and after the formation of hard–hard, hard–soft, and soft–soft contacts and has impact for numerous applications of reversible colloidal gels, including their use as inks for additive manufacturing.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2022

Electrochemical Aging and Halogen Oxides Formation on Multiwalled Carbon Nanotubes and Fe 3 O 4 @g-C 3 N 4 Coated Conductive Membranes

Electrochemical membrane filtration is widely reported to enhance water contaminants' degradation or rejection via anodic oxidation or cathodic repulsion. Despite their advances, electrochemical membranes or electrocatalysts often suffer from corrosion or passivation, especially under strong electrode potentials or reactions. Moreover, the formation of toxic byproducts, such as chlorinated organic compounds and oxyhalides (e.g., ClO 4 - ) is another major concern. This study investigated the membrane aging processes of two types of conductive membranes, multiwalled carbon nanotubes (MWCNTs) and ferrite/graphitic carbon nitride hybrids (Fe 3 O 4 @g-C 3 N 4 ) coated on ceramic membranes. Under high current densities (~ 20 mA∙cm -2 ) with anodic potentials (~10 V), MWCNTs and Fe 3 O 4 @g-C 3 N 4 catalysts underwent evident oxidation as indicated by an increase of the intensity ratio of the Raman spectral bands (I D /I G ) and charge transfer resistance (R ct ) of two electrochemical membranes. Under variations of electrode potentials, chloride or bromide were shown to be oxidized to bromate (BrO 3 - ) and chlorate (ClO 3 - ) at levels of 1-10 mmol∙L -1 . The formation of BrO 3 - and ClO 3 - was dependent on the solution pH, current densities (1-20 mA∙cm -2 ), and initial concentrations of Br or Cl ions. Finally, to warrant a safe and rational design and operation of electrochemically reactive membrane processes, membrane aging and toxic byproduct's formation deserve careful characterization under relevant water filtration environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2014

Complete Decoding and Reporting of Aviation Routine Weather Reports (METARs)

Aviation Routine Weather Report (METAR) provides surface weather information at and around observation stations, including airport terminals. These weather observations are used by pilots for flight planning and by air traffic service providers for managing departure and arrival flights. The METARs are also an important source of weather data for Air Traffic Management (ATM) analysts and researchers at NASA and elsewhere. These researchers use METAR to correlate severe weather events with local or national air traffic actions that restrict air traffic, as one example. A METAR is made up of multiple groups of coded text, each with a specific standard coding format. These groups of coded text are located in two sections of a report: Body and Remarks. The coded text groups in a U.S. METAR are intended to follow the coding standards set by National Oceanic and Atmospheric Administration (NOAA). However, manual data entry and edits made by a human report observer may result in coded text elements that do not follow the standards, especially in the Remarks section. And contrary to the standards, some significant weather observations are noted only in the Remarks section and not in the Body section of the reports. While human readers can infer the intended meaning of non-standard coding of weather conditions, doing so with a computer program is far more challenging. However such programmatic pre-processing is necessary to enable efficient and faster database query when researchers need to perform any significant historical weather analysis. Therefore, to support such analysis, a computer algorithm was developed to identify groups of coded text anywhere in a report and to perform subsequent decoding in software. The algorithm considers common deviations from the standards and data entry mistakes made by observers. The implemented software code was tested to decode 12 million reports and the decoding process was able to completely interpret 99.93 of the reports. This document presents the deviations from the standards and the decoding algorithm. Storing all decoded data in a database allows users to quickly query a large amount of data and to perform data mining on the data. Users can specify complex query criteria not only on date or airport but also on weather condition. This document also describes the design of a database schema for storing the decoded data, and a Data Warehouse web application that allows users to perform reporting and analysis on the decoded data. Finally, this document presents a case study correlating dust storms reported in METARs from the Phoenix International airport with Ground Stops issued by Air Route Traffic Control Centers (ATCSCC). Blowing widespread dust is one of the weather conditions when dust storm occurs. By querying the database, 294 METARs were found to report blowing widespread dust at the Phoenix airport and 41 of them reported such condition only in the Remarks section of the reports. When METAR is a data source for an ATM research, it is important to include weather conditions not only from the Body section but also from the Remarks section of METARs.

METAR Decoder/Parser↗

NASA NTRS2011

The SEDs and Host Galaxies of the Dustiest GRB Afterglows

The afterglows and host galaxies of long gamma-ray bursts (GRBs) offer unique opportunities to study star-forming galaxies in the high-z Universe, Until recently, however. the information inferred from GRB follow-up observations was mostly limited to optically bright afterglows. biasing all demographic studies against sight-lines that contain large amounts of dust. Aims. Here we present afterglow and host observations for a sample of bursts that are exemplary of previously missed ones because of high visual extinction (A(sub v) (Sup GRB) approx > 1 mag) along the sight-line. This facilitates an investigation of the properties, geometry and location of the absorbing dust of these poorly-explored host galaxies. and a comparison to hosts from optically-selected samples. Methods. This work is based on GROND optical/NIR and Swift/XRT X-ray observations of the afterglows, and multi-color imaging for eight GRB hosts. The afterglow and galaxy spectral energy distributions yield detailed insight into physical properties such as the dust and metal content along the GRB sight-line as well as galaxy-integrated characteristics like the host's stellar mass, luminosity. color-excess and star-formation rate. Results. For the eight afterglows considered in this study we report for the first time the redshift of GRBs 081109 (z = 0.97S7 +/- 0.0005). and the visual extinction towards GRBs 0801109 (A(sub v) (Sup GRB) = 3.4(sup +0.4) (sub -0.3) mag) and l00621A (A(sub v) (Sup GRB) = 3.8 +/- 0.2 mag), which are among the largest ever derived for GRB afterglows. Combined with non-extinguished GRBs. there is a strong anti-correlation between the afterglow's metals-to-dust ratio and visual extinction. The hosts of the dustiest afterglows are diverse in their properties, but on average redder(((R - K)(sub AB)) approximates 1.6 mag), more luminous ( approximates 0.9 L (sup *)) and massive ((log M(sup *) [M(solar]) approximates 9.8) than the hosts of optically-bright events. We hence probe a different galaxy population. suggesting that previous host samples miss most of the massive. chemically-evolved and metal-rich members. This also indicates that the dust along the sight-line is often related to host properties, and thus probably located in the diffuse ISM or interstellar clouds and not in the immediate GRB environment. Some of the hosts in our sample. are blue, young or of small stellar mass illustrating that even apparently non-extinguished galaxies possess very dusty sight-lines due to a patchy dust distribution. Conclusions. The afterglows and host galaxies of the dustiest GRBs provide evidence for a complex dust geometry in star-forming galaxies. In addition, they establish a population of luminous. massive and correspondingly chemically-evolved GRB hosts. This suggests that GRBs trace the global star-formation rate better than studies based on optically-selected host samples indicate, and the previously-claimed deficiency of high-mass host galaxies was at least partially a selection effect.

Kruhler, T.↗

NASA NTRS2001

Magnetized Target Fusion: Prospects for Low-Cost Fusion Energy

Magnetized Target Fusion (MTF) has attracted renewed interest in recent years because it has the potential to resolve one of the major problems with conventional fusion energy research - the high cost of facilities to do experiments and in general develop practical fusion energy. The requirement for costly facilities can be traced to fundamental constraints. The Lawson condition implies large system size in the case of conventional magnetic confinement, or large heating power in the case of conventional inertial confinement. The MTF approach is to use much higher fuel density than with conventional magnetic confinement (corresponding to megabar pressures), which results in a much-reduced system size to achieve Lawson conditions. Intrinsically the system must be pulsed because the pressures exceed the strength of any known material. To facilitate heating the fuel (or "target") to thermonuclear conditions with a high-power high-intensity source of energy, magnetic fields are used to insulate the high-pressure fuel from material surroundings (thus "magnetized target"). Because of magnetic insulation, the required heating power intensity is reduced by many orders of magnitude compared to conventional inertial fusion, even with relatively poor energy confinement in the magnetic field, such as that characterized by Bohm diffusion. In this paper we show semi-quantitatively why MTF-should allow fusion energy production without costly facilities within the same generally accepted physical constraints used for conventional magnetic and inertial fusion. We also briefly discuss potential applications of this technology ranging from nuclear rockets for space propulsion to a practical commercial energy system. Finally, we report on the exploratory research underway, and the interesting physics issues that arise in the MTF regime of parameters. Experiments at Los Alamos are focused on formation of a suitable plasma target for compression, utilizing the knowledge base for compact toroids called Field-Reversed Configurations. As reported earlier, it appears that the existing pulsed-power Shiva Star facility at the Air Force Research Laboratory in Albuquerque, NM can satisfy the heating requirements by means of imploding a thin metal cylinder (called a "liner") surrounding an FRC of the type presently being developed. The proposed next step is an integrated liner-on-plasma experiment in which an FRC would be heated to 10 keV by the imploding liner.

Siemon, Richard E.↗