Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Locating the Source of Events in Power Distribution Systems Using Micro-PMU Data

A novel method is proposed to locate the source of events in power distribution systems by using distribution-level phasor measurement units, a.k.a., micro-PMUs. An event in this paper is defined rather broadly to include any major change in any component across the distribution feeder. The goal is to enhance situational awareness in distribution grid by keeping track of the operation (or misoperation) of various grid equipment, assets, distribution energy resources, loads, etc. The proposed method is built upon the compensation theorem in circuit theory to generate an equivalent circuit to represent the event by using voltage and current synchrophasors that are captured by micro-PMUs. Importantly, this method makes critical use of not only magnitude but also synchronized phase angle measurements, thus, it justifies the need to use micro-PMUs, as opposed to ordinary RMS-based voltage and current sensors. The proposed method can work with data from as a few as only two micro-PMUs. The effectiveness of the developed method is demonstrated through computer simulations on the IEEE 123-bus test system, and also on micro-PMUs measurements from a real-life 12.47 kV test feeder in Riverside, CA. In conclusion, the results verify that the proposed method is accurate and robust in locating the source of different types of events on power distribution systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Individual Load Model Parameter Estimation in Distribution Systems Using Load Switching Events

There currently exists a mature literature on modeling the aggregate load of a distribution feeder by making use of measurements at its feeder-head at substation. The primary application of such feeder-aggregated load models is in sub-transmission or transmission system analysis. However, there is a growing need in practice also to model each individual load across the feeder. If available, such individual load models have applications in power distribution system analysis, e.g., to better integrate distributed energy resources or to improve power quality and reliability. Motivated by this observation, in this paper, we propose a new method for individual load modeling in power distribution systems. It works by using the measurements only at the feeder-head. It takes an innovative approach to analyzing the load switching events across the distribution feeder itself, instead of or in addition to relying on upstream voltage events that are commonly used in feeder-aggregated load modeling. By tracking the downstream load switching events, the proposed method can make a robust estimation of the ZIP load model parameters for all individual loads. The proposed method is examined on small illustrative test-feeders as well as the IEEE 33-bus test system under various operating scenarios. The adverse impact of errors in measurements and system parameters are also investigated on the performance of the developed load modeling method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Situational Awareness in Distribution Grid Using Micro-PMU Data: A Machine Learning Approach

The recent development of distribution-level phasor measurement units, a.k.a. micro-PMUs, has been an important step towards achieving situational awareness in power distribution networks. The challenge however is to transform the large amount of data that is generated by micro-PMUs to actionable information and then match the information to use cases with practical value to system operators. This open problem is addressed in this paper. First, we introduce a novel data-driven event detection technique to pick out valuable portion of data from extremely large raw micro-PMU data. Subsequently, a datadriven event classifier is developed to effectively classify power quality events. Importantly, we use field expert knowledge and utility records to conduct an extensive data-driven event labeling. Moreover, certain aspects from event detection analysis are adopted as additional features to be fed into the classifier model. In this regard, a multi-class support vector machine (multi-SVM) classifier is trained and tested over 15 days of real-world data from two micro-PMUs on a distribution feeder in Riverside, CA. In total, we analyze 1.2 billion measurement points, and 10,700 events. Here, the effectiveness of the developed event classifier is compared with prevalent multi-class classification methods, including k-nearest neighbor method as well as decision-tree method. Importantly, two real-world use-cases are presented for the proposed data analytics tools, including remote asset monitoring and distribution-level oscillation analysis.

24 POWER TRANSMISSION AND DISTRIBUTION↗

TU-F-201-01: General Aspects of Radiochromic Film Dosimetry

Since the introduction of radiochromic films (RCF) for radiation dosimetry, the scope of RCF dosimetry has expanded steadily to include many medical applications, such as radiation therapy and diagnostic radiology. The AAPM Task Group (TG) 55 published a report on the recommendations for RCF dosimetry in 1998. As the technology is advancing rapidly, and its routine clinical use is expanding, TG 235 has been formed to provide an update to TG-55 on radiochromic film dosimetry. RCF dosimetry applications in clinical radiotherapy have become even more widespread, expanding from primarily brachytherapy and radiosurgery applications, and gravitating towards (but not limited to) external beam therapy (photon, electron and protons), such as quality assurance for IMRT, VMAT, Tomotherapy, SRS/SRT, and SBRT. In addition, RCF applications now extend to measurements of radiation dose in particle beams and patients undergoing medical exams, especially fluoroscopically guided interventional procedures and CT. The densitometers/scanners used for RCF dosimetry have also evolved from the He-Ne laser scanner to CCD-based scanners, including roller-based scanner, light box-based digital camera, and flatbed color scanner. More recently, multichannel RCF dosimetry introduced a new paradigm for external beam dose QA for its high accuracy and efficiency. This course covers in detail the recent advancements in RCF dosimetry. Learning Objectives: Introduce the paradigm shift on multichannel film dosimetry Outline the procedures to achieve accurate dosimetry with a RCF dosimetry system Provide comprehensive guidelines on RCF dosimetry for various clinical applications One of the speakers has a research agreement from Ashland Inc., the manufacturer of Gafchromic film.

60 APPLIED LIFE SCIENCES↗

Measurement of the double-differential inclusive jet cross section in proton–proton collisions at $\sqrt{s} = 13\,\text {TeV} $

A measurement of the double-differential inclusive jet cross section as a function of jet transverse momentum $p_{\mathrm {T}} $ and absolute jet rapidity $|y |$ is presented. The analysis is based on proton–proton collisions collected by the CMS experiment at the LHC at a centre-of-mass energy of 13 $\,\text {TeV}$ . The data samples correspond to integrated luminosities of 71 and 44 $\,\text {pb}^\text {-1}$ for $|y |<3$ and $3.2<|y |<4.7$ , respectively. Jets are reconstructed with the anti- $k_{\mathrm {t}} $ clustering algorithm for two jet sizes, R, of 0.7 and 0.4, in a phase space region covering jet $p_{\mathrm {T}} $ up to 2 $\,\text {TeV}$ and jet rapidity up to $|y |$ = 4.7. Predictions of perturbative quantum chromodynamics at next-to-leading order precision, complemented with electroweak and nonperturbative corrections, are used to compute the absolute scale and the shape of the inclusive jet cross section. The cross section difference in R, when going to a smaller jet size of 0.4, is best described by Monte Carlo event generators with next-to-leading order predictions matched to parton showering, hadronisation, and multiparton interactions. In the phase space accessible with the new data, this measurement provides a first indication that jet physics is as well understood at $\sqrt{s}=13\,\text {TeV} $ as at smaller centre-of-mass energies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the differential cross section and charge asymmetry for inclusive $\mathrm {p}\mathrm {p}\rightarrow \mathrm {W}^{\pm }+X$ production at ${\sqrt{s}} = 8$

The differential cross section and charge asymmetry for inclusive pp → W ± + X → μ ± ν + X production at √s = 8 TeV are measured as a function of muon pseudorapidity. The data sample corresponds to an integrated luminosity of 18.8 inverse femtobarns recorded with the CMS detector at the LHC. Furthermore, these results provide important constraints on the parton distribution functions of the proton in the range of the Bjorken scaling variable x from 10E -3 to 10E -1 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of dijet azimuthal decorrelation in pp collisions at $\sqrt{s}=8\,\mathrm{TeV} $

A measurement of the decorrelation of azimuthal angles between the two jets with the largest transverse momenta is presented for seven regions of leading jet transverse momentum up to 2.2 TeV. The analysis is based on the proton-proton collision data collected with the CMS experiment at a centre-of-mass energy of 8 TeV corresponding to an integrated luminosity of 19.7 fb –1 . The dijet azimuthal decorrelation is caused by the radiation of additional jets and probes the dynamics of multijet production. The results are compared to fixed-order predictions of perturbative quantum chromodynamics (QCD), and to simulations using Monte Carlo event generators that include parton showers, hadronization, and multiparton interactions. Event generators with only two outgoing high transverse momentum partons fail to describe the measurement, even when supplemented with next-to-leading-order QCD corrections and parton showers. Much better agreement is achieved when at least three outgoing partons are complemented through either next-to-leading-order predictions or parton showers. Furthermore, this observation emphasizes the need to improve predictions for multijet production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the production cross section of a W boson in association with two b jets in pp collisions at $\sqrt{s} = 8{\,\mathrm{{TeV}}} $

The production cross section of a W boson in association with two b jets is measured using a sample of proton–proton collisions at $\sqrt{s} = 8{\,\mathrm{{TeV}}} $ collected by the CMS experiment at the CERN LHC. The data sample corresponds to an integrated luminosity of 19.8 $\,\text {fb}^\text {-1}$ . The W bosons are reconstructed via their leptonic decays, $\mathrm {W}\rightarrow \ell \nu $ , where $\ell =\mu $ or $\mathrm {e}$ . The fiducial region studied contains exactly one lepton with transverse momentum $p_{\mathrm {T}} ^{\ell }>30\,\mathrm{{GeV}} $ and pseudorapidity $|\eta ^{\ell } |<2.1$ , with exactly two b jets with $p_{\mathrm {T}} >25\,\mathrm{{GeV}} $ and $|\eta |<2.4$ and no other jets with $p_{\mathrm {T}} >25\,\mathrm{{GeV}} $ and $|\eta |<4.7$ . The cross section is measured to be $\sigma ( {{\mathrm {p}\mathrm {p}}} \rightarrow {\mathrm {W}} (\ell \nu )$ + ${\mathrm{{b}}\mathrm{{\overline{b}}}})= 0.64 \pm 0.03{\,\mathrm{{(stat)}}} \pm 0.10{\,\mathrm{{(syst)}}} \pm 0.06{\,\mathrm{{(theo)}}} \pm 0.02{\,\mathrm{{(lumi)}}}\,{\text {pb}}$ , in agreement with standard model predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the $t\bar{t}$ production cross section using events in the e$\mu$ final state in pp collisions at $\sqrt{s} =$ 13 TeV

The cross section of top quark-antiquark pair production in proton-proton collisions at $\sqrt{s} = 13$ TeV is measured by the CMS experiment at the LHC, using data corresponding to an integrated luminosity of 2.2 inverse femtobarns. The measurement is performed by analyzing events in which the final state includes one electron, one muon, and two or more jets, at least one of which is identified as originating from hadronization of a b quark. The measured cross section is 792 $\pm$ 8 (stat) $\pm$ 37 (syst) $\pm$ 21 (lumi) pb, in agreement with the expectation from the standard model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the WZ production cross section in pp collisions at $\sqrt{s} = 7$ and 8 $\,\text{TeV}$ and search for anomalous triple gauge couplings at $\sqrt{s} = 8\,\text{TeV} $

The WZ production cross section is measured by the CMS experiment at the CERN LHC in proton–proton collision data samples corresponding to integrated luminosities of 4.9 $\,\text{fb}^{-1}$ collected at $\sqrt{s} = 7\,\text{TeV} $ , and 19.6 $\,\text{fb}^{-1}$ at $\sqrt{s} = 8\,\text{TeV} $ . The measurements are performed using the fully-leptonic WZ decay modes with electrons and muons in the final state. The measured cross sections for $71< m_{\mathrm{Z}} < 111\,\text{GeV} $ are $\sigma ({\mathrm{p}\mathrm{p}}\rightarrow {\mathrm{W}\mathrm{Z}},~\sqrt{s} = 7\,\text{TeV}) = 20.14 \pm 1.32\,\text{(stat)} \pm 0.38\,\text{(theo)} \pm 1.06\,\text{(exp)} \pm 0.44\,\text{(lumi)} $ $\,\text{pb}$ and $\sigma ({\mathrm{p}\mathrm{p}}\rightarrow {\mathrm{W}\mathrm{Z}},~\sqrt{s} = 8\,\text{TeV}) = 24.09 \pm 0.87\,\text{(stat)} \pm 0.80\,\text{(theo)} \pm 1.40\,\text{(exp)} \pm 0.63\,\text{(lumi)} $ $\,\text{pb}$ . Differential cross sections with respect to the $\mathrm{Z}$ boson $p_{\mathrm{T}}$ , the leading jet $p_{\mathrm{T}}$ , and the number of jets are obtained using the $\sqrt{s} = 8\,\text{TeV} $ data. The results are consistent with standard model predictions and constraints on anomalous triple gauge couplings are obtained.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Suppression and azimuthal anisotropy of prompt and nonprompt ${\mathrm{J}}/\psi $ production in PbPb collisions at $\sqrt{{s_{_{\text {NN}}}}} =2.76$ $\,\mathrm{TeV}$

The nuclear modification factor $R_{\mathrm{AA}}$ and the azimuthal anisotropy coefficient $v_{2}$ of prompt and nonprompt (i.e. those from decays of b hadrons) ${\mathrm{J}}/\psi $ mesons, measured from PbPb and pp collisions at $\sqrt{{s_{_{\text {NN}}}}} =2.76$ $\,\mathrm{TeV}$ at the LHC, are reported. The results are presented in several event centrality intervals and several kinematic regions, for transverse momenta $p_{\mathrm{T}} >6.5$ $\,{\mathrm{GeV}}/{\mathrm{c}}$ and rapidity $|{y}|<2.4$ , extending down to $p_{\mathrm{T}} =3$ $\,{\mathrm{GeV}}/{\mathrm{c}}$ in the $1.6<|{y}|<2.4$ range. The $v_{2}$ of prompt ${\mathrm{J}}/\psi $ is found to be nonzero, but with no strong dependence on centrality, rapidity, or $p_{\mathrm{T}}$ over the full kinematic range studied. The measured $v_{2}$ of nonprompt ${\mathrm{J}}/\psi $ is consistent with zero. The $R_{\mathrm{AA}}$ of prompt ${\mathrm{J}}/\psi $ exhibits a suppression that increases from peripheral to central collisions but does not vary strongly as a function of either y or $p_{\mathrm{T}}$ in the fiducial range. The nonprompt ${\mathrm{J}}/\psi $ $R_{\mathrm{AA}}$ shows a suppression which becomes stronger as rapidity or $p_{\mathrm{T}}$ increases. The $v_{2}$ and $R_{\mathrm{AA}}$ of open and hidden charm, and of open charm and beauty, are compared.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A search for new phenomena in pp collisions at $\sqrt{s} = 13\,\text {TeV} $ in final states with missing transverse momentum and at least one jet using the $\alpha _{\mathrm {T}}$ variable

A search for new phenomena is performed in final states containing one or more jets and an imbalance in transverse momentum in pp collisions at a centre-of-mass energy of 13 $\,\text {TeV}$ . The analysed data sample, recorded with the CMS detector at the CERN LHC, corresponds to an integrated luminosity of 2.3 $\,\text {fb}^{-1}$ . Several kinematic variables are employed to suppress the dominant background, multijet production, as well as to discriminate between other standard model and new physics processes. The search provides sensitivity to a broad range of new-physics models that yield a stable weakly interacting massive particle. The number of observed candidate events is found to agree with the expected contributions from standard model processes, and the result is interpreted in the mass parameter space of fourteen simplified supersymmetric models that assume the pair production of gluinos or squarks and a range of decay modes. For models that assume gluino pair production, masses up to 1575 and 975 $\,\text {GeV}$ are excluded for gluinos and neutralinos, respectively. For models involving the pair production of top squarks and compressed mass spectra, top squark masses up to 400 $\,\text {GeV}$ are excluded.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗