Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pressure effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Low pressure direct injection strategies effect on a small SI natural gas two-stroke engine’s energy distribution and emissions

This paper examines methods to simultaneously improve efficiency and reduce emissions from a 34 cc air-cooled two-stroke engine configured to operate on natural gas, using tuned intake plus exhaust resonators designed from Helmholtz resonance theory to promote effective scavenging. The engine was developed for novel application in a small, free piston engine for decentralized power generation. Operation occurred at wide-open-throttle at a speed of 5400 RPM for both port injection (PI) and low-pressure direct injection (LPDI). In both cases, the electronic ignition timing was adjusted for maximum brake torque, while the fuel was adjusted such that both rich and lean combustion were examined. The LPDI engine was then operated over a variety of engine speeds. An energy balance was completed for both PI and LPDI operation, which quantified all energy pathways, as engine operating regimes changed. Results showed that exhaust chemical energy (ECE) for LPDI was reduced significantly when compared to PI, mostly due to less fuel slip. The fuel slip rate ranged from 35 to 40% for PI operation while it was in the range of 6–20% for LPDI operation. However, mixture stratification with LPDI operation increased carbon monoxide emissions. The start-of-injection (SOI) was also examined, targeting a SOI to provide the highest trapping efficiency and most stable combustion. For LPDI operation, trapping efficiency, which is function of engine speed, showed significant effects on overall efficiency and fuel slip. Air volumetric efficiency increased due to the absence of gaseous fuel within the intake manifold. It was shown that, relative to PI, the overall engine indicated efficiency increased by 90% to a maximum indicated efficiency of 30% for LPDI operation with a SOI of 180 CAD BTDC.

42 ENGINEERING↗

Viscoelastic properties of pressure overload hypertrophied myocardium: effect of serine protease treatment

To determine whether and to what extent one component of the extracellular matrix, fibrillar collagen, contributes causally to abnormalities in viscoelasticity, collagen was acutely degraded by activation of endogenous matrix metalloproteinases (MMPs) with the serine protease plasmin. Papillary muscles were isolated from normal cats and cats with right ventricular pressure overload hypertrophy (POH) induced by pulmonary artery banding. Plasmin treatment caused MMP activation, collagen degradation, decreased the elastic stiffness constant, and decreased the viscosity constant in both normal and POH muscles. Thus, whereas many mechanisms may contribute to the abnormalities in myocardial viscoelasticity in the POH myocardium, changes in fibrillar collagen appear to play a predominant role.

NASA Discipline Cardiopulmonary↗

Anharmonic theory of superconductivity in the high-pressure materials

Electron-phonon superconductors at high pressures have displayed the highest values of critical superconducting temperature Tc on record, now rapidly approaching room temperature. Despite the importance of high-P superconductivity in the quest for room-temperature superconductors, a mechanistic understanding of the effect of pressure and its complex interplay with phonon anharmonicity and superconductivity is missing, as numerical simulations can bring only system-specific details, clouding out key players controlling the physics. In this work, we develop a minimal model of electron-phonon superconductivity under an applied pressure which takes into account the anharmonic decoherence of the optical phonons. We find that T c behaves nonmonotonically as a function of the ratio Γ/ω 0 , where Γ is the optical phonon damping and ω 0 is the optical phonon energy at zero pressure and momentum. Optimal pairing occurs for a critical ratio Γ/ω 0 when the phonons are on the verge of decoherence (“diffusonlike” limit). Our framework gives insights into recent experimental observations of T c as a function of pressure in the complex BCS material TlInTe 2 .

36 MATERIALS SCIENCE↗

Intracellular effects of atmospheric-pressure plasmas on melanoma cancer cells

Gas discharge plasmas formed at atmospheric pressure and near room temperature have recently been shown as a promising tool for cancer treatment. The mechanism of the plasma action is attributed to generation of reactive oxygen and nitrogen species, electric fields, charges, and photons. The relative importance of different modes of action of atmospheric-pressure plasmas depends on the process parameters and specific treatment objects. Hence, an in-depth understanding of biological mechanisms that underpin plasma-induced death in cancer cells is required to optimise plasma processing conditions. Here, the intracellular factors involved in the observed anti-cancer activity in melanoma Mel007 cells are studied, focusing on the effect of the plasma treatment dose on the expression of tumour suppressor protein TP73. Over-expression of TP73 causes cell growth arrest and/or apoptosis, and hence can potentially be targeted to enhance killing efficacy and selectivity of the plasma treatment. It is shown that the plasma treatment induces dose-dependent up-regulation of TP73 gene expression, resulting in significantly elevated levels of TP73 RNA and protein in plasma-treated melanoma cells. Silencing of TP73 expression by means of RNA interference inhibited the anticancer effects of the plasma, similar to the effect of caspase inhibitor z-VAD or ROS scavenger N-acetyl cysteine. These results confirm the role of TP73 protein in dose-dependent regulation of anticancer activity of atmospheric-pressure plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A computational analysis of under-expanded jets in the hypersonic regime

Underexpanded axisymmetric jets are studied numerically using a full Navier-Stokes solver. Emphasis has been given to supersonic and hypersonic jets in supersonic and hypersonic ambient flows, a phenomenon previously overlooked. It is demonstrated that the shear layers and shock patterns in a jet plume can be captured without complicated viscous/inviscid and subsonic/supersonic coupling schemes. In addition, a supersonic pressure relief effect has been identified for underexpanded jets in supersonic ambient flows. While it is well known that an underexpanded jet in a quiescent ambience (or subsonic ambience) contains multiple shock cells, the present study shows that because of the supersonic pressure relief effect, an underexpanded jet in a supersonic or hypersonic ambience contains only one major shock cell.

Hsu, Andrew T.↗

A computational analysis of under-expanded jets in the hypersonic regime

Underexpanded axisymmetric jets are studied numerically using a full Navier-Stokes solver. Emphasis has been given to supersonic and hypersonic jets in supersonic and hypersonic ambient flows, a phehomenon previously being overlooked for the most part. The present work demonstrates that the shear layers and shock patterns in a jet plume can be captured without complicated viscous/inviscid and subsonic/supersonic coupling schemes. In addition, a supersonic pressure relief effect has been identified for underexpanded jets in supersonic ambient flows. While it is well known that an underexpanded jet in a quiescent ambience (or subsonic ambience) contains multiple shock cells, the present study shows that because of the supersonic pressure relief effect, an underexpanded jet in a supersonic or hypersonic ambience contains only one major shock cell.

Hsu, Andrew T.↗

Magnetic instability in Ce heavy fermion compounds

Different types of cerium heavy fermion compounds are discussed: cubic antiferromagnetic ground states (CeAl 2 , CePb 3 , Celn 3 ) and Pauli paramagnetic ground states (CeSn 3 , CeRu 2 Si 2 ). Applying external variables such as pressure or magnetic field restores a localized Fermi liquid state. Special attention is paid to CeRu 2 Si 2 which is approaching a singular magnetic instability for T→ 0. Comparison between pressure and alloying effects emphasize the important role of the itineracy of the 4f electrons at the magnetic instability.

36 MATERIALS SCIENCE↗

Probabilistic Assessment of Hypobaric Decompression Sickness Treatment Success

The Hypobaric Decompression Sickness (DCS) Treatment Model links a decrease in computed bubble volume from increased pressure (DeltaP), increased oxygen (O2) partial pressure, and passage of time during treatment to the probability of symptom resolution [P(symptom resolution)]. The decrease in offending volume is realized in 2 stages: a) during compression via Boyle's Law and b) during subsequent dissolution of the gas phase via the O2 window. We established an empirical model for the P(symptom resolution) while accounting for multiple symptoms within subjects. The data consisted of 154 cases of hypobaric DCS symptoms along with ancillary information from tests on 56 men and 18 women. Our best estimated model is P(symptom resolution) = 1 / (1+exp(-(ln(Delta P) - 1.510 + 0.795×AMB - 0.00308×Ts) / 0.478)), where (DeltaP) is pressure difference (psid), AMB = 1 if ambulation took place during part of the altitude exposure, otherwise AMB = 0; and where Ts is the elapsed time in mins from start of the altitude exposure to recognition of a DCS symptom. To apply this model in future scenarios, values of DeltaP as inputs to the model would be calculated from the Tissue Bubble Dynamics Model based on the effective treatment pressure: (DeltaP) = P2 - P1 | = P1×V1/V2 - P1, where V1 is the computed volume of a spherical bubble in a unit volume of tissue at low pressure P1 and V2 is computed volume after a change to a higher pressure P2. If 100% ground level O2 (GLO) was breathed in place of air, then V2 continues to decrease through time at P2 at a faster rate. This calculated value of (DeltaP then represents the effective treatment pressure at any point in time. Simulation of a "pain-only" symptom at 203 min into an ambulatory extravehicular activity (EVA) at 4.3 psia on Mars resulted in a P(symptom resolution) of 0.49 (0.36 to 0.62 95% confidence intervals) on immediate return to 8.2 psia in the Multi-Mission Space Exploration Vehicle. The P(symptom resolution) increased to near certainty (0.99) after 2 hrs of GLO at 8.2 psia or with less certainty on immediate pressurization to 14.7 psia [0.90 (0.83 - 0.95)]. Given the low probability of DCS during EVA and the prompt treatment of a symptom with guidance from the model, it is likely that the symptom and gas phase will resolve with minimum resources and minimal impact on astronaut health, safety, and productivity.

Conkin, Johnny↗

A Priori Analysis of a Compressible Flamelet Model using RANS Data for a Dual-Mode Scramjet Combustor

In an effort to make large eddy simulation of hydrocarbon-fueled scramjet combustors more computationally accessible using realistic chemical reaction mechanisms, a compressible flamelet/progress variable (FPV) model was proposed that extends current FPV model formulations to high-speed, compressible flows. Development of this model relied on observations garnered from an a priori analysis of the Reynolds-Averaged Navier-Stokes (RANS) data obtained for the Hypersonic International Flight Research and Experimentation (HI-FiRE) dual-mode scramjet combustor. The RANS data were obtained using a reduced chemical mechanism for the combustion of a JP-7 surrogate and were validated using avail- able experimental data. These RANS data were then post-processed to obtain, in an a priori fashion, the scalar fields corresponding to an FPV-based modeling approach. In the current work, in addition to the proposed compressible flamelet model, a standard incompressible FPV model was also considered. Several candidate progress variables were investigated for their ability to recover static temperature and major and minor product species. The effects of pressure and temperature on the tabulated progress variable source term were characterized, and model coupling terms embedded in the Reynolds- averaged Navier-Stokes equations were studied. Finally, results for the novel compressible flamelet/progress variable model were presented to demonstrate the improvement attained by modeling the effects of pressure and flamelet boundary conditions on the combustion.

Quinlan, Jesse R.↗

Advanced turbo-prop airplane interior noise reduction-source definition

Acoustic pressure amplitudes and phases were measured in model scale on the surface of a rigid semicylinder mounted in an acoustically treated wind tunnel near a prop-fan (an advanced turboprop with many swept blades) model. Operating conditions during the test simulated those of a prop-fan at 0.8 Mach number cruise. Acoustic pressure amplitude and phase contours were defined on the semicylinder surface. Measurements obtained without the semi-cylinder in place were used to establish the magnitude of pressure doubling for an aircraft fuselage located near a prop-fan. Pressure doubling effects were found to be 6dB at 90 deg incidence decreasing to no effect at grazing incidence. Comparisons of measurements with predictions made using a recently developed prop-fan noise prediction theory which includes linear and non-linear source terms showed good agreement in phase and in peak noise amplitude. Predictions of noise amplitude and phase contours, including pressure doubling effects derived from test, are included for a full scale prop-fan installation.

Magliozzi, B.↗

VISSTPX2DRECTG16V4MINNIS (c1)

Satellite-based retrievals of cloud and radiation properties are available in this value-added product provided by Bill Smith’s group at NASA/Langley using the VISST (Visible Infrared Solar-Infrared Split Window Technique) algorithm. This product contains VISST-derived pixel-level products from the GOES-16 satellite, rectilinear projection 2-D array.

broadband LW flux↗

The effects of equal-pressure fixed slots on the characteristics of a Clark Y Airfoil

A type of fixed open slot so arranged that no flow would pass through it at a lift coefficient corresponding to high-speed flight was investigated in the N.A.C.A. 7 by 10 foot wind tunnel to determine the possibilities of such a high-lift device for increasing the speed-range ratio of a wing. The condition of no through flow was achieved by locating the slot openings at points of equal static pressure at the design lift coefficient as determined from the pressure distribution about the plain wing. Two models of Clark Y wings with such equal-pressure slots were tested and the smoke-flow patterns about them observed. The results of this investigation show that the condition of no air flow through the slot at the desired lift coefficient is attainable. The surface discontinuities produced by the slot openings have, however, such a large effect on the drag that such slots show little promise. An appreciable increase is produced in the maximum lift and the speed-range can be as high as for the plain wing.

Harris, Thomas A↗

Effect of negative chemical pressure on the prototypical itinerant magnet MnSi

The evolution of the magnetic and charge transport properties of the itinerant magnetic metal MnSi with the substitution of Al and Ga on the Si site is investigated. We observe an increase in unit cell volume indicating that both Al and Ga substitutions create negative chemical pressure. There are substantial increases in the Curie temperature and the ordered moment demonstrating that the substitutions give the magnetism a stronger itinerant character. The substitutions also increase the range of temperature and field where the skyrmion phase is stable due to a change in the character of the magnetism. In contrast to the behavior of pure MnSi and expectations for the intrinsic anomalous Hall effect, we find a significant temperature dependence to the magnitude and sign of anomalous Hall conductivity constant in Al or Ga substituted samples. This temperature dependence likely reflects changes in the spin-orbit coupling strength with temperature, which may have significant consequences on the helical and skyrmion states. Finally, we observe a continuous evolution of magnetic and charge transport properties through positive to negative pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Model to Account for the Effects of Load Ratio and Hydrogen Pressure on the Fatigue Crack Growth Behavior of Pressure Vessel Steels

A phenomenological model for estimating the effects of load ratio R and hydrogen pressure P H2 on the hydrogen-assisted fatigue crack growth rate (HA–FCGR) behavior in the transient and steady-state regimes of pressure vessel steels is described. The “transient regime” is identified with crack growth within a severely embrittled zone of intense plasticity at the crack tip. The “steady-state” behavior is associated with the crack growing into a region of comparatively lower hydrogen concentration located further away from the crack tip. The model treats the effects of R and P H2 as being functionally separable. In the transient regime, the effects of the hydrogen pressure on the HA–FCGR behavior were negligible but were significant in the steady-state regime. The hydrogen concentration in the steady-state region is modeled as being dependent on the kinetics of lattice diffusion, which is sensitive to pressure. Experimental HA–FCGR data from the literature were used to validate the model. The new model was shown to be valid over a wide range of conditions that ranged between –1 ≤ R ≤ 0.8 and 0.02 ≤ P H2 ≤ 103 MPa for pressure vessel steels.

36 MATERIALS SCIENCE↗

Apparatus and method for generating large mass flow of high temperature air at hypersonic speeds

High temperature, high mass air flow and a high Reynolds number test air flow in the Mach number 8-10 regime of adequate test flow duration is attained by pressurizing a ceramic-lined storage tank with air to a pressure of about 100 to 200 atmospheres. The air is heated to temperatures of 7,000 to 8,000 R prior to introduction into the tank by passing the air over an electric arc heater means. The air cools to 5,500 to 6,000 R while in the tank. A decomposable gas such as nitrous oxide or a combustible gas such as propane is injected into the tank after pressurization and the heated pressurized air in the tank is rapidly released through a Mach number 8-10 nozzle. The injected gas medium upon contact with the heated pressurized air effects an exothermic reaction which maintains the pressure and temperature of the pressurized air during the rapid release.

Sabol, A. P.↗