Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLOTTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Study of noise sources in a subsonic fan using measured blade pressures and acoustic theory

Sources of noise in a 1.4 m (4.6 ft) diameter subsonic tip speed propulsive fan running statically outdoors are studied using a combination of techniques. Signals measured with pressure transducers on a rotor blade are plotted in a format showing the space-time history of inlet distortion. Study of these plots visually and with statistical correlation analysis confirms that the inlet flow contains long, thin eddies of turbulence. Turbulence generated in the boundary layer of the shroud upstream of the rotor tips was not found to be an important noise source. Fan noise is diagnosed by computing narrowband spectra of rotor and stator sound power and comparing these with measured sound power spectra. Rotor noise is computed from spectra of the measured blade pressures and stator noise is computed using the author's stator noise theory. It is concluded that the rotor and stator sources contribute about equally at frequencies in the vicinity of the first three harmonics of blade passing frequency. At higher frequencies, the stator contribution diminishes rapidly and the rotor/inlet turbulence mechanism dominates. Two parametric studies are performed by using the rotor noise calculation procedure which was correlated with test. In the first study, the effects on noise spectrum and directivity are calculated for changes in turbulence properties, rotational Mach number, number of blades, and stagger angle. In the second study the influences of design tip speed and blade number on noise are evaluated.

Hanson, D. B.↗
NASA NTRS1975

Understanding the NASTRAN structural plotter

Functions of the plotting hardware and the operations performed by the NASTRAN structural plotter are summarized to provide the user an insight into how the program works. The processing performed in response to each plot command is described and the interrelationships of the various parameters are explained. To assist in the effective and efficient utilization of the system, examples are provided which also illustrate several not yet documented capabilities of the Level 16 structural plotter.

Kuusinen, L. R.↗
NASA NTRS1975

Recent increase in Jupiter's decimetric radio emission

Observations of the linear polarization properties of Jupiter's decimetric radioemission showed the planet's total intensity to increase between late summer 1973 and July 1974. Measurements were made with the NASA 64-m parabolic antenna operating at a wavelength of 13.1 cm. Data were plotted as a function of the longitude of the central meridian. Both data sets showed similar periodic intensity variation with longitude. However, the 1974 data points were consistently above the corresponding 1973 values. The flux density difference was attributed to the increase in the planet's decimetric radio emission. Measured at wavelengths of 21 cm and 11 to 13 cm the average peak flux densities were plotted as a function of the epoch of each observation.

Klein, M. J.↗
NASA NTRS1975

A study of subsonic fan noise sources

Sources of noise in a 1.4 m (4.6 ft) diameter subsonic tip speed propulsive fan were studied using a combination of theoretical, experimental, and computer plotting techniques developed specially for noise diagnosis. To assess the structure of inlet turbulence, signals measured from pressure transducers on a rotor blade were plotted in a format to show the space-time history of inlet distortion. Ingested turbulence contained long, thin eddies which produce a tone-like noise component. Turbulence generated in the shroud boundary layer upstream of the rotor tips was found not to be an important noise source. However, this boundary layer does contain large amplitude disturbances caused by inlet turbulence which could be important in fans with thicker boundary layers. Theoretical calculations based on measured blade pressures show that rotor/inlet turbulence interaction and rotor/stator interaction are equally important sources of noise near the first three harmonics of blade passing frequency. At higher frequencies (above 2000 Hz) the rotor noise is dominant.

Hanson, D. B.↗
NASA NTRS1974

Quality and use of ERTS radiometric information in geologic applications

Some techniques are described for making full use of the data contained in an ERTS MSS image. Only about one-fourth of the data in a single band can be displayed at one time on a black and white image; therefore, when all four bands are considered, only about 7% of the available data can be used by the interpreter. Selecting the proper subset of information for the photointerpreter is therefore a necessity. Ratio methods exclude the brightness information from the display. A field study in one area using a portable spectrometer has shown only fair correlation with ERTS radiometry after one normalization procedure. Plots of brightness of test areas with sun angle show discrepancies. Plots of ratios show discrepancies of lesser magnitude, although the error limits are large.

Goetz, A. F. H.↗
NASA NTRS1975

Shortgrass prairie spectral measurements

The spectral methods of vegetation analysis not only measure herbage biomass on a nondestructive basis but also can be adapted to aircraft and satellite devices to map the spatial distribution over an area in an efficient and economical fashion. This study reviews the ground-based in situ field spectrometry in the 0.350-0.800 micron region of the spectrum. A statistical analysis of in situ spectroreflectance data from sample plots of the shortgrass prairie shows that green biomass, chlorophyll concentration, and leaf water content are directly interrelated to that composite property of the plot which is called functioning green biomass. Spectrocorrelation data indicate the spectral regions of optimum sensitivity for a remote estimation of the green biomass, chlorophyll, and leaf water content. The near-infrared region of the spectrum shows a high positive spectrocorrelation to these three sample parameters, regardless of the amount of standing dead vegetation.

Tucker, C. J.↗
NASA NTRS1975

Stellar refraction - A tool to monitor the height of the tropopause from space

Calculations of stellar refraction for a setting or rising star as viewed from a spacecraft show that the tropopause is a discernible feature in a plot of refraction vs time. The height of the tropopause is easily obtained from such a plot. Since the refraction suffered by the starlight appears to be measurable with some precision from orbital altitudes, this technique is suggested as a method for remotely monitoring the height of the tropopause. Although limited to nighttime measurements, the method is independent of supporting data or model fitting and easily lends itself to on-line data reduction.

Schuerman, D. W.↗
NASA NTRS1975

A flight investigation of oscillating air forces: Equipment and technique

The equipment and techniques are described which are to be used in a project aimed at measuring oscillating air forces and dynamic aeroelastic response of a swept wing airplane at high subsonic speeds. Electro-hydraulic inertia type shakers installed in the wing tips will excite various elastic airplane modes while the related oscillating chordwise pressures at two spanwise wing stations and the wing mode shapes are recorded on magnetic tape. The data reduction technique, following the principle of a wattmeter harmonic analyzer employed by Bratt, Wight, and Tilly, utilizes magnetic tape and high speed electronic multipliers to record directly the real and imaginary components of oscillatory data signals relative to a simple harmonic reference signal. Through an extension of this technique an automatic flight-flutter-test data analyzer is suggested in which vector plots of mechanical admittance or impedance would be plotted during the flight test.

Reed, W. H., III↗
NASA NTRS1975

MLS airborne antenna research

The geometrical theory of diffraction was used to analyze the elevation plane pattern of on-aircraft antennas. The radiation patterns for basic elements (infinitesimal dipole, circumferential and axial slot) mounted on fuselage of various aircrafts with or without radome included were calculated and compared well with experimental results. Error phase plots were also presented. The effects of radiation patterns and error phase plots on the polarization selection for the MLS airborne antenna are discussed.

Yu, C. L.↗
NASA NTRS1975

Measurements of farfield sound generation from a flow-excited cavity

Results of 1/3-octave-band spectral measurements of internal pressures and the external acoustic field of a tangentially blown rectangular cavity are compared. Proposed mechanisms for sound generation are reviewed, and spectra and directivity plots of cavity noise are presented. Directivity plots show a slightly modified monopole pattern. Frequencies of cavity response are calculated using existing predictions and are compared with those obtained experimentally. The effect of modifying the upstream boundary layer on the noise was investigated, and its effectiveness was found to be a function of cavity geometry and flow velocity.

Block, P. J. W.↗
NASA NTRS1973

IMS/Satellite Situation Center report

Services planned by the Satellite Situation Center during the International Magnetospheric Study are briefly described. User requirements are emphasized. The following data are presented: orbital parameters for ISIS 2, ESRO 4, and HEOS 2; entry exit times for highly elliptical satellites; plots for highly elliptical earth satellites; and plots and flux tube intersection for low altitude satellites.

Source record↗
NASA NTRS1975

A computer program for fitting smooth surfaces to three-dimensional aircraft configurations

A computer program developed to fit smooth surfaces to the component parts of three-dimensional aircraft configurations was described. The resulting equation definition of an aircraft numerical model is useful in obtaining continuous two-dimensional cross section plots in arbitrarily defined planes, local tangents, enriched surface plots and other pertinent geometric information; the geometry organization used as input to the program has become known as the Harris Wave Drag Geometry.

Craidon, C. B.↗
NASA NTRS1976

Infrared emission spectra from operating elastohydrodynamic sliding contacts

Infrared emission spectra from an operating EHD sliding contact were obtained through a diamond window for an aromatic polymer solute present in equal concentration in four different fluids. Three different temperature ranges, three different loads, and three different speeds for every load were examined. Very sensitive Fourier spectrophotometric (Interferometric) techniques were employed. Band Intensities and band intensity ratios found to depend both on the operating parameters and on the fluid. Fluid film and metal surface temperatures were calculated from the spectra and their dependence on the mechanical parameters plotted. The difference between these temperatures could be plotted against shear rate on one curve for all fluids. However, at the same shear rate the difference between bulk fluid temperature and diamond window temperature was much higher for one of the fluids, a traction fluid, than for the others.

Lauer, J. L.↗
NASA NTRS1976

Analysis of structural dynamic data from Skylab. Volume 2: Skylab analytical and test model data

The orbital configuration test modal data, analytical test correlation modal data, and analytical flight configuration modal data are presented. Tables showing the generalized mass contributions (GMCs) for each of the thirty tests modes are given along with the two dimensional mode shape plots and tables of GMCs for the test correlated analytical modes. The two dimensional mode shape plots for the analytical modes and uncoupled and coupled modes of the orbital flight configuration at three development phases of the model are included.

Demchak, L.↗
NASA NTRS1976

Analysis of structural dynamic data from Skylab. Volume 2: Skylab analytical and test modal data

A compendium is presented of orbital configuration test modal data, analytical test modal data, analytical test correlation modal data and analytical flight configuration 1.2 modal data. Section A presents tables showing the generalized mass contributions for each of the thirty test modes. Section B presents the two dimensional mode shape plots for the thirty test modes. Tables of GMC's for the test correlated analytical modes are presented in Section C. These analytical modes were generated from a model that was adjusted to match test results by use of the methodology discussed in Sections 2.3 and 5.4 of Volume I of this report. Section D presents the two dimensional mode shape plots for the analytical modes. Sections E and F contain the uncoupled and coupled modes of the orbital flight configuration 1.2 at three development phases of the model.

Demchak, L.↗
NASA NTRS1975

Preliminary Shuttle payload contamination assessment

The paper discusses the molecular induced atmosphere of the Shuttle Orbiter and a payload carrier (Spacelab) configuration - long module and a 3-m pallet) in the Shuttle Orbiter payload bay and compares it to the ambient atmosphere at various orbital altitudes. The density and flux of the contaminants are expressed as a function of distance out of the payload bay for a line-of-sight perpendicular to the payload bay and payload carrier. Isodensity plots about the Shuttle Orbiter for a side and end view for each major source are presented. The major sources considered are the external surface materials mass loss, pressurized habitation area leakage, attitude control engines, and supplemental flash evaporator venting. The resulting plots provide an insight into the extent and spatial variation of the on-orbit contaminant-induced environment.

Ress, E. B.↗
NASA NTRS1975

Comparison of two methods of performing the Thellier experiment

Two methods for performing the Thellier experiment on paleointensity determinations are compared. The first method is essentially that of Coe (1967) and the second is a slight modification of it. Prepared samples containing different species of magnetic particles are used, and both methods are always performed on the same sample. The study is designed to accent procedural differences between the two methods. It is shown that only the Coe method yields linear PNRM-PTRM (Partial ThermoRemanent Magnetization) plots for single domain and pseudo-single domain particles, because it maintains the symmetry between high-temperature VRM (Viscous Remanent Magnetization) and spontaneous decay, whereas for the modified Coe method the spontaneous decay is enhanced. For multidomain remanence, even the Coe method yields a nonlinear concave-up PNRM-PTRM plot. Paleointensity determinations employing only the ratio NRM/TRM provide no means of evaluating the reliability of the results.

Levi, S.↗
NASA NTRS1976

Sinusoidal input describing function for hysteresis followed by elementary backlash

The author proposes a new sinusoidal input describing function which accounts for the serial combination of hysteresis followed by elementary backlash in a single nonlinear element. The output of the hysteresis element drives the elementary backlash element. Various analytical forms of the describing function are given, depending on the a/A ratio, where a is the half width of the hysteresis band or backlash gap, and A is the amplitude of the assumed input sinusoid, and on the value of the parameter representing the fraction of a attributed to the backlash characteristic. The negative inverse describing function is plotted on a gain-phase plot, and it is seen that a relatively small amount of backlash leads to domination of the backlash character in the describing function. The extent of the region of the gain-phase plane covered by the describing function is such as to guarantee some form of limit cycle behavior in most closed-loop systems.

Ringland, R. F.↗