Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Optical properties of MgZnO alloys: Excitons and exciton-phonon complexes

The characteristics of the excitonic absorption and emission around the fundamental bandgap of wurtzite Mg{sub x}Zn{sub 1-x}O grown on c-plane sapphire substrates by plasma assisted molecular beam epitaxy with Mg contents between x = 0 and x = 0.23 are studied using spectroscopic ellipsometry and photoluminescence (PL) measurements. The ellipsometric data were analyzed using a multilayer model yielding the dielectric function (DF). The imaginary part of the DF for the alloys exhibits a pronounced feature which is attributed to exciton-phonon coupling (EPC) similar to the previously reported results for ZnO. Thus, in order to determine reliable transition energies, the spectral dependence is analyzed by a model which includes free excitonic lines, the exciton continuum, and the enhanced absorption due to EPC. A line shape analysis of the temperature-dependent PL spectra yielded in particular the emission-related free excitonic transition energies, which are compared to the results from the DF line-shape analysis. The PL linewidth is discussed within the framework of an alloy disorder model.

36 MATERIALS SCIENCE↗

Simulation of optical properties of silicon solar cells textured with penetrating V-shaped grooves

The coefficients of reflection (R), transmission (T), and absorption (A) of light for two wavelengths {lambda} = 1000 and 1100 nm for silicon wafers that have thicknesses t = 50, 100, and 200 {mu}m and are textured with penetrating V-shaped grooves with various geometries have been calculated; the half-width of groove's base w (10, 20, and 30 {mu}m) and the depth of the groove d (0 {<=} d {<=} t) have been varied. In the case of an increase in the aspect ratio d/w (in the case of {lambda} = 1100 nm), the absorption curve A(d/w) monotonically ascends from 6.6 to 67.6%, whereas, for {lambda} = 1000 nm, a nontrivial dependence A(d/w) is observed: the absorption coefficient first increases to 54%, attains then a maximum of 97% at d/w = 3, and then decreases at d > t/2 for all values of w. This effect of a decrease in absorption with an increase in d/w distinguishes texturing with penetrating grooves from conventional surface texturing. Distributions of angles of deviations of photons in the plane of bottoms of grooves are obtained; these distributions are represented by a set of {delta}-type functions.

36 MATERIALS SCIENCE↗

Investigations of electrical and optical properties of low energy ion irradiated α-Fe{sub 2}O{sub 3} (hematite) thin films

Thin films of α-Fe{sub 2}O{sub 3} of thickness ~100 nm were synthesized on Si (100) and glass substrates by thermal evaporation method. The as deposited films were annealed at 400°C in Oxygen environment for 2 hours to obtain the desired phase. The annealed films found to be polycrystalline in nature with an average crystallite size ~7 nm. The direct and indirect band gaps were found to be 2.2 and 1.5 eV respectively for annealed films using. I-V characteristics and Hall-effect measurement of annealed films showed n-type semi conducting behavior. Further, films were irradiated with nitrogen ions of energy 10 keV at an ion fluence of 1×10{sup 18} ions/cm{sup 2}. After irradiation, a decrease in both direct as well as indirect band gap was observed, from 2.2 to 2.1 eV and 1.5 to 1.3 eV respectively. I-V characteristic and Hall-Effect measurement confirmed change in conductivity of the films from n-type to p-type after irradiation, which can have possible applications in semi conducting device fabrications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Uniform Ln{sup 3+} (Eu{sup 3+}, Tb{sup 3+}) doped NaLa(WO{sub 4}){sub 2} nanocrystals: Synthesis, characterization, and optical properties

Uniform shuttle-like Ln{sup 3+} (Eu{sup 3+}, Tb{sup 3+}) doped NaLa(WO{sub 4}){sub 2} nanocrystals have been solvothermally synthesized, and the size of the nanocrystals could be easily controlled by adjusting the volume ratio of ethylene glycol (EG) to water. Doped with 5 mol% Eu{sup 3+} and Tb{sup 3+} ions, the NaLa(WO{sub 4}){sub 2} nanocrystals showed strong red and green emissions with lifetimes of 0.8 and 1.40 ms, respectively. A high quenching concentration of 15 mol% was observed in Eu{sup 3+}-doped NaLa(WO{sub 4}){sub 2} nanocrystals and 35 mol% in Tb{sup 3+}-doped NaLa(WO{sub 4}){sub 2} nanocrystals. The emission intensity measurements of Eu{sup 3+}-doped NaLa(WO{sub 4}){sub 2} with different sizes indicated that the emission intensity of shuttles with length of 300 nm in average was stronger than that of shuttles with length of 900 nm in average, but was weaker than that of needles with length of 4 and 9 {mu}m in average. - Graphical abstract: Uniform shuttle-like Ln{sup 3+}(Eu{sup 3+}, Tb{sup 3+}) doped NaLa(WO{sub 4}){sub 2} nanocrystals have been solvothermally synthesized in the mixed solvent of ethylene glycol (EG) and water at 180 deg. C for 16 h.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The structure and optical properties of Sr{sub 1−x}Ca{sub x}MoO{sub 3}

The solid solution Sr{sub 1−x}Ca{sub x}MoO{sub 3} (x=0.00, 0.05, 0.10, 0.13, 0.15 and 0.17) has successfully been synthesised and X-ray Powder diffraction has revealed the occurrence of structural phase transitions, from cubic Pm−3m to tetragonal I4/mcm, and then to orthorhombic Imma as the value of x increased. Discontinuities were observed in the cell parameters and bond lengths and angles at the transition from tetragonal to orthorhombic symmetry as a result of the switching of the octahedral rotation axis at the tetragonal to orthorhombic transition. The increased octahedral tilting could also be linked to the decrease in the band gap from 2.20 eV to 2.10 eV as x increased from 0 to 0.17. - Graphical abstract: Table of Contents Figure Caption: Ultraviolet-visible absorbance spectra for Sr{sub 1−x}Ca{sub x}MoO{sub 3} showing a reduction in band gap upon increasing x as a result of increased octahedral tilting. - Highlights: • The solid solution Sr{sub 1−x}Ca{sub x}MoO{sub 3} has been synthesised. • Structural phase transitions are observed. • Discontinuities were observed in the cell parameters and bond lengths and angles. • Upon increasing x from 0 to 0.17 the band gap reduces from 2.20 eV to 2.10 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using digital imaging to assess spectral solar-optical properties of complex fenestration materials: A new approach in video-goniophotometry

A large variety of angularly selective fenestration systems have been developed in the past two decades and show great potential in improving visual comfort while reducing energy consumption, especially when combined with spectrally selective properties. Such systems include light-redirecting glazing, shading, film coatings, reflectors and others. To assess the potential of these systems accurately and reliably, one needs to be able to predict in detail how they modify the energy, direction and spectral make-up of solar radiation. For this assessment, spectral (wavelength-dependent) Bidirectional Transmission or Reflection Distribution Functions are used, usually referred to as BTDFs or BRDFs, or more generally BSDFs for Scattering Functions. To enable a faster, cheaper, and continuous investigation of these properties over most of the solar spectrum (400-1700 nm), an innovative goniospectrometric instrument has been created, relying on digital imaging, on light collection by an ellipsoidal half-transparent mirror, and on a filtering method in the visible range to generate spectral radiometric BSDFs. This so-called Heliodome instrument is described in this paper. It enables the performance of new fenestration technologies to be assessed in terms of lighting and solar gains management potential. The rotating table also serves as a heliodon, an architectural design tool for visualizing sunlight distribution inside a scale model and performing analyses on appropriate sun control strategies. The Heliodome's major innovations compared to other devices are to enable an analysis of both the visible and the near-infrared portions of the solar spectrum, to provide spectral as well as photometric light distribution data, and to ensure a continuous investigation of the transmitted or reflected light in a time-efficient way. (author)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Optical properties of oxygen-implanted CdS:O layers in terms of band anticrossing theory

The microcathodoluminescence (MCL) and photoreflection spectra of CdS:O layers implanted with oxygen ions to 4 Multiplication-Sign 10{sup 20} cm{sup -3} are investigated. Used method of MCL spectroscopy yields information only about the implanted-layer volume. Exciton MCL spectra, which allow one to determine the concentration of dissolved oxygen in the CdS:O layers and the influence of deviation of the substrates from stoichiometry, are recorded. The homogeneity of the ion-implanted layers is studied by cathodoluminescence (CL) scanning electron microscopy. The relationship between light-emitting areas and the luminescence band at {approx}630 nm is established. The reason for enhancement of this band upon radiation annealing is revealed and its nature as the luminescence of F{sup +} centers in CdS is confirmed. New photoreflection spectroscopy data are obtained, which describe the specific behavioral features of oxygen on the layer surface as an isoelectronic impurity in highly mismatched alloys (HMAs). It is shown that sulfur completely bonds and removes oxygen from CdS:O. Oxygen-free CdS remains on the surface in the form of nanoparticles, the size of which depends on the oxygen concentration in the CdS:O layer bulk. The results obtained are in agreement with the predictions of band anticrossing theory.

36 MATERIALS SCIENCE↗

Structural and optical properties of GaN and InGaN nanoparticles by chemical co-precipitation method

Highlights: ► First report on InGaN NPs by chemical co-precipitation method. ► There is no phase separation in InGaN NPs. ► Both NPs are suitable for optoelectronic devices in the visible region. ► First experimental observation of phonon mode at 272 cm{sup −1} for GaN NPs. ► First report on μ-Raman analysis for InGaN NPs. -- Abstract: A facile method for the synthesis of gallium nitride (GaN) and indium gallium nitride (InGaN) nanoparticles (NPs) has been reported by simple chemical co-precipitation method. The average diameters of the GaN and InGaN NPs were 12 nm and 38 nm respectively. GaN NPs show high crystalline quality with hexagonal structure while InGaN NPs exhibits some cubic inclusion by X-ray diffraction. Room-temperature photoluminescence analysis shows the near-band edge emission at 3.43 eV for GaN and a strong blue emission at 3.0 eV for In{sub 0.4}Ga{sub 0.6}N NPs. The E{sub 2}{sup H} phonon peaks from micro-Raman scattering at 567 cm{sup −1} for GaN and 564 cm{sup −1} for InGaN confirms the wurtzite nature of both the NPs. In addition, we have also assigned some other phonon modes of GaN associated with zone boundary K point of the Brillouin zone which is not experimentally observed for their bulk counterparts.

36 MATERIALS SCIENCE↗

Synthesis, crystal structure refinement, and nonlinear-optical properties of CaB{sub 3}O{sub 5}(OH): Comparative crystal chemistry of calcium triborates

Calcium triborate CaB{sub 3}O5(OH) obtained by hydrothermal synthesis in the Ca(OH){sub 2}–H{sub 3}BO{sub 3}–Na{sub 2}CO{sub 3}–KCl system is studied by single-crystal X-ray diffraction. The parameters of the orthorhombic unit cell are as follows: a = 13.490(1), b = 6.9576(3), and c = 4.3930(2) Å; V = 412.32(3) Å{sup 3} and space group Pna2{sub 1}. The structure is refined in the anisotropic approximation of the atomic displacement parameters to R = 4.28% using 972 vertical bar F vertical bar > 4σ(F). It is confirmed that the crystal structure of Ca triborate CaB{sub 3}O{sub 5}(OH) is identical to that described earlier. The hydrogen atom is localized. An SHG signal stronger than that of the quartz standard is registered. The phase transition of calcium triborate into calciborite is found on heating. The comparative crystal-chemical analysis of a series of borates with the general chemical formula 2CaO · 3B{sub 2}O{sub 3} · nH{sub 2}O (n = 0–13) with the constant CaO: B{sub 2}O{sub 3}= 2: 3 ratio and variable content of water is performed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NaLa(MoO{sub 4}){sub 2}: RE{sup 3+} (RE{sup 3+} = Eu{sup 3+}, Sm{sup 3+}, Er{sup 3+}/Yb{sup 3+}) microspheres: the synthesis and optical properties

The strong green upconversion (UC) emission were observed in various Er{sup 3+}, Yb{sup 3+} co-doped NaLa(MoO{sub 4}){sub 2} samples synthesized via a hydrothermal route. The UC intensity depends on the dopant concentration, and the optimal UC emission was obtained in NaLa(MoO{sub 4}){sub 2}: 0.02Er{sup 3+}/0.10 Yb{sup 3+}. - Highlights: • The NaLa(MoO{sub 4}){sub 2} microspheres doped with Eu{sup 3+}, Sm{sup 3+} and Er{sup 3+}/Yb{sup 3+} were synthesized by a hydrothermal method. • The effects of the EDTA in the initial solution crystal phase and morphology were studied. • The down-conversion luminescence properties of NaLa(MoO{sub 4}){sub 2}: RE{sup 3+} (RE{sup 3+} = Eu{sup 3+}, Sm{sup 3+}) were investigated. • The UC luminescence properties and mechanism of Er{sup 3+}/Yb{sup 3+} co-doped NaLa(MoO{sub 4}){sub 2} was discussed. - Abstract: NaLa(MoO{sub 4}){sub 2}: RE{sup 3+} (RE{sup 3+} = Eu{sup 3+}, Sm{sup 3+}) microspheres have been synthesized at 180 °C via a facile EDTA-mediated hydrothermal route. X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), photoluminescence (PL) spectra were employed to characterize the samples. It was found that the amount of EDTA in the initial solution was responsible for crystal phase and shape determination. The effect of Eu{sup 3+} and Sm{sup 3+} doping concentrations on the luminescent intensity was also investigated in details. Furthermore, the up-conversion (UC) emissions have been observed in a series of Er{sup 3+}/Yb{sup 3+} co-doped NaLa(MoO{sub 4}){sub 2} samples. Concentration dependent studies revealed that the optimal composition was realized for a 2% Er{sup 3+} and 10% Yb{sup 3+}-doping concentration.

36 MATERIALS SCIENCE↗

Structure and optical properties of Al{sub x}Zn{sub 1-x}O alloys by sol-gel technique

Research highlights: {yields} We propose wide gap semiconductor alloy - Al{sub x}Zn{sub 1-x}O (x = 0-0.5) thin films. {yields} Wurtzite structure of ZnO disappeared as the Al content exceeded 20 at.% and particles of thin films were getting smaller with the increase of Al content, being a formation of compound nanostructure. {yields} Al{sub x}Zn{sub 1-x}O thin films have high transmittance and blue-shift of the absorption edge. {yields} It was found that maximum value of binding energy of Zn3d, ZnLMM, Al2p, O1s was obtained when the Al content was 30 at.%. -- Abstract: Al{sub x}Zn{sub 1-x}O (x = 0-0.5) thin films were prepared on quartz glass substrates by sol-gel technique. X-ray diffraction (XRD), scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS) were employed for microstructure characterization of these thin films. In films with up to 20 at.% Al incorporation, compound nano-crystal phase was observed while wurtzite structure disappeared. Zn3d electron binding energy and Zn LMM's chemical shift were both increased by more than 0.4 eV. Transmittance spectra revealed that these films possessed high transmittance in the visible region, and the end of UV absorption edge shifted to less than 300 nm when Al content exceeds 20 at.% due to quantum confinement effect.

36 MATERIALS SCIENCE↗

Optical properties of metamorphic hybrid heterostuctures for vertical-cavity surface-emitting lasers operating in the 1300-nm spectral range

The possibility of fabricating hybrid metamorphic heterostructures for vertical-cavity surfaceemitting lasers working in the 1300-nm spectral range is demonstrated. The metamorphic semiconductor part of the heterostructure with a GaAs/AlGaAs distributed Bragg reflector and an active region based on InAlGaAs/InGaAs quantum wells is grown by molecular-beam epitaxy on a GaAs (100) substrate. The top dielectric mirror with a SiO{sub 2}/Ta{sub 2}O{sub 5} distributed Bragg reflector is formed by magnetron sputtering. The spectra of the room-temperature microphotoluminescence of these vertical-cavity surface-emitting laser heterostructures are studied under 532-nm excitation in the power range of 0–70 mW (with a focused-beam diameter of ~1 μm). The superlinear dependence of the photoluminescence intensity on the excitation power, narrowing of the photoluminescence peaks, and a change in the modal composition may be indications of lasing. The results obtained give evidence that the technology of the metamorphic growth of heterostructures on GaAs substrates can be used for the fabrication of vertical-cavity surface-emitting lasers working in the 1300- nm spectral range.

36 MATERIALS SCIENCE↗

Growth, microstructure, structural and optical properties of PVP-capped CdS nanoflowers for efficient photocatalytic activity of Rhodamine B

Highlights: • Synthesis of un-capped and PVP-capped CdS microstructures by Hydrothermal. • Growth of both the flower and dendrite microstructures controlled by the growth time. • Phase transition of CdS from cubic zinc blend to hexagonal by the growth time. • CdS flowers enhanced the photocatalytic performance of RhB under visible light. • PVP-capped CdS showed the highest degradation of 95% of RhB within 120 min. - Abstract: Size and structure tunability of polyvinyl pyrolidone (PVP) capped cadmium sulfide (PVP-capped CdS) flowers were synthesized by controlling the reaction time. XRD pattern indicated a phase transition from the cubic zinc blend to the hexagonal phase of CdS powder as the reaction time increased. As per the microstructure analysis with respect to the reaction time, the spherical nanoparticles were transformed in to the flower like morphology consisting of sword like nanorods and confirmed by the bright field images of TEM, while, HR-TEM images showed the uniform lattice spacing. UV-spectra exhibited a red shift due to the excitations of CdS nanoparticles. The near band edge (NBE) peak of PVP-capped CdS was completely diminished which indicated to sulphur vacancies on the surface of flowers. The photocatalytic activity of PVP-capped CdS flowers was detected the fast degradation of Rhodamine B (RhB) dye (95% for 120 min) by irradiation of visible light.

36 MATERIALS SCIENCE↗

Charge transfer and optical properties of wurtzite-type ZnS/(CdS/ZnS){sub n} (n = 2, 4, 8) superlattices

Graphical abstract: (a) Normalized temperature-dependent PL spectra of ZnS/(CdS/ZnS){sub 4} superlattices from 5 to 300 K and (b) schematic of charge transfer at CdS/ZnS interface. - Highlights: • Wurtzite ZnS/(CdS/ZnS){sub n} superlattices were prepared at 100 °C by pulsed laser deposition. • Surface phonon of ZnS and multiple phonons modes of ZnS and CdS were observed. • The charge transfer of electrons from CdS electron to ZnS holes by excitation energy was found. - Abstract: ZnS/(CdS/ZnS){sub n} (n = 2, 4, 8) superlattices were deposited on sapphire substrate by pulsed laser deposition (PLD) with alternate cadmium sulfide (CdS) and zinc sulfide (ZnS) crystals at 100 °C. The prepared samples with an average thickness of ∼30 nm for ZnS layer and ∼60 nm for CdS layer have a wurtzite-type structure. Surface phonon of ZnS and multiple phonons modes for ZnS and CdS were observed from Raman spectra. PL spectra show a strong green emission at ∼496 nm, two weak emission bands at ∼400 and ∼577 nm, where the emission band at 400 nm was attributed to the recombination of surface defects states to valence, the emission band at 577 nm as the recombination of Cd{sub i}–V{sub Cd} centers, and the strong emission at ∼496 nm is from the charge transfer of electrons from CdS electron to ZnS holes by excitation energy.

36 MATERIALS SCIENCE↗

Controllable synthesis, growth mechanism and optical properties of the ZnSe quantum dots and nanoparticles with different crystalline phases

Graphical abstract: The ZnSe quantum dots (3.5 nm) with the wurtzite structure exhibited a strong near band-edge emission (NBE) peak centered at 422 nm. The zinc blende ZnSe nanoparticles (21 nm) exhibited near-band-edge luminescence peak centered at 472 nm. Highlights: ► The results of TEM showed that the ZnSe quantum dots were about 3.5 nm. ► The ZnSe quantum dots exhibited a near band-edge emission peak centered at 422 nm. ► The ZnSe nanoparticles exhibited near-band-edge luminescence peak centered at 472 nm. - Abstract: ZnSe precursors were prepared by a solvothermal method at 180 °C without any surface-active agents. ZnSe quantum dots and nanoparticles were obtained by annealing the precursors at 300 °C for 2 h in argon atmosphere. The ZnSe quantum dots were about 3.5 nm, while the ZnSe nanoparticles were about 21 nm, as observed using TEM. The growth mechanisms for the two samples were discussed; this proved that the high coordination ability of ethylenediamine to zinc played an important role in the final phase of the products. The ZnSe quantum dots with the wurtzite structure exhibited a strong near band-edge emission (NBE) peak centered at 422 nm, which was blue-shifted in comparison to that of the bulk ZnSe, which was mainly caused by the quantum confinement effect. However, the zinc blende ZnSe nanoparticles exhibited a near-band-edge luminescence peak centered at 472 nm.

36 MATERIALS SCIENCE↗

Synthesis by an ionic liquid-assisted method and optical properties of nanoflower Y{sub 2}O{sub 3}

Flower-like Y{sub 2}O{sub 3} nano-/microstructured phosphors without metal activators have successfully been fabricated by an ionic liquid (IL)-assisted method involving temperature (600 {sup o}C) annealing. In this paper, the effect of IL concentration on the morphology of the product has been investigated. The IL plays a crucial role in the formation of various morphologies of Y{sub 2}O{sub 3}. The structural and morphological features of the obtained samples have been characterized by means of X-ray powder diffraction (XRD) analysis, photoluminescence spectra (PL), Fourier-transform infrared (FT-IR) spectra and X-ray photoelectron spectra (XPS). The photoluminescence spectra of the products exhibit an intense bluish-white emission (ranging from 405 to 430 nm and centered at 418 nm). The luminescent mechanisms have been ascribed to the carbon impurities in the Y{sub 2}O{sub 3} host. The effect of the ILs cation and the counter anions on the Y{sub 2}O{sub 3} morphology of these nanostructures was studied experimentally. It was observed that Y{sub 2}O{sub 3} morphology and PL of these nanostructures were strongly influenced by the type of cation and anion. As the length of the subsidiary chain of cation section of IL (imidaziole ione) reduces, the thickness of the nano-sheets increases. It is expected that the present method may easily be extended to similar nano-/microstructures of other oxide materials. Such investigations are currently underway.

36 MATERIALS SCIENCE↗

Formation of {beta}-nickel hydroxide plate-like structures under mild conditions and their optical properties

Nanostructural {beta}-nickel hydroxide ({beta}-Ni(OH){sub 2}) plates were prepared using the microwave-hydrothermal (MH) method at a low temperature and short reaction times. An ammonia solution was employed as the coordinating agent, which reacts with [Ni(H{sub 2}O){sub 6}]{sup 2+} to control the growth of {beta}-Ni(OH){sub 2} nuclei. A trigonal {beta}-Ni(OH){sub 2} single phase was observed by X-ray diffraction (XRD) analyses, and the crystal cell was constructed with structural parameters and atomic coordinates obtained from Rietveld refinement. Field emission scanning electron microscopy (FE-SEM) images revealed that the samples consisted of hexagonal-shaped nanoplates with a different particle size distribution. Broad absorption bands assigned as transitions of Ni{sup 2+} in oxygen octahedral sites were revealed by UV-vis spectra. Photoluminescence (PL) properties observed with a maximum peak centered in the blue-green region were attributed to different defects, which were produced during the nucleation process. We present a growth process scheme of the {beta}-Ni(OH){sub 2} nanoplates. - Graphical abstract: Nanostructural {beta}-Ni(OH){sub 2} crystalline powders were prepared by rapid microwave-hydrothermal method for 1, 8 and 32 min. The hexagonal-shaped nanoplates obtained presented PL emission in the blue-green region and each decomposed component represents a different type of electronic transition, which can be linked to the structural arrangement or surface defects. Highlights: > Ammonia solution to control the growth of {beta}-Ni(OH){sub 2} nuclei. > Regular plates-shape related to crystallization-dissolution-recrystallization. > The surface states and lattice defects generated in growth mechanism of crystals. > Different defects produced in the growth process responsible by photoluminescence. > Each component of photoluminescence curve linked to structural arrangement or surface defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical properties of nearly lattice-matched GaN/(Al,In)N quantum wells

We report a systematic study of the photoluminescence (PL) properties of a series of nearly lattice-matched (LM) GaN/(Al,In)N single quantum well (SQW) samples, with well thickness ranging from 1.5 to 5 nm, grown by metalorganic vapor phase epitaxy. Temperature dependent PL and time-resolved PL measurements reveal similar trends among the studied SQW samples, which also indicate strong localization effects. The observed PL energy behavior, akin to the S-shape, accompanied first by a narrowing and then a broadening of the PL line width with increasing temperature, closely resemble previous observations made on the more established (In,Ga)N/GaN QW system. The similar trends observed in the PL features of those two QW systems imply that the PL properties of LM GaN/(Al,In)N SQW samples are also governed by localized states. The effects of carrier transfer among these localization sites are clearly observed for the 3 nm thick QW, evidenced by an increasing PL intensity in the lower energy spectral window and a concomitant increase in the corresponding PL decay time. Time-resolved data corroborate the picture of strongly localized carriers and also indicate that above a well thickness dependent delocalization temperature carrier distribution across the localized sites reaches thermal equilibrium, as the PL decay times over different spectral regions converge to the same value. Based on the difference between the calculated QW ground state transition energy, obtained using the envelope wave function formalism, and the measured PL energy, a localization energy of at least a few hundreds of meV has been extracted for all of the studied SQW samples. This rather large value also implies that In-related localization effects are more pronounced in the GaN/(Al,In)N system with respect to those in the (In,Ga)N/GaN one for a similar In content.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗