Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multiplicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

A Catalog of Wide Binary and Multiple Systems of Bright Stars from Gaia-DR2 and the Virtual Observatory

Binary and multiple stars have long provided an effective empirical method of testing stellar formation and evolution theories. In particular, the existence of wide binary systems (separations >20,000 au) is particularly challenging to binary formation models as their physical separations are beyond the typical size of a collapsing cloud core (~5000–10,000 au). We mined the recently published Gaia-DR2 catalog to identify bright comoving systems in the five-dimensional space (sky position, parallax, and proper motion). We identified 3741 comoving binary and multiple stellar candidate systems, out of which 575 have compatible radial velocities for all the members of the system. The candidate systems have separations between ~400 and 500,000 au. We used the analysis tools of the Virtual Observatory to characterize the comoving system members and to assess their reliability. The comparison with previous comoving systems catalogs obtained from TGAS showed that these catalogs contain a large number of false systems. In addition, we were not able to confirm the ultra-wide binary population presented in these catalogs. The robustness of our methodology is demonstrated by the identification of well known comoving star clusters and by the low contamination rate for comoving binary systems with projected physical separations <50,000 au. These last constitute a reliable sample for further studies. The catalog is available online at the Spanish Virtual Observatory portal (http://svo2.cab.inta-csic.es/vocats/v2/comovingGaiaDR2/).

79 ASTRONOMY AND ASTROPHYSICS↗

Spectroscopy and Photometry of Multiple Populations along the Asymptotic Giant Branch of NGC 2808 and NGC 6121 (M4)

We present a photometric and spectroscopic study of multiple populations along the asymptotic giant branch (AGB) of the intermediate-metallicity globular clusters (GCs) NGC 2808 and NGC 6121 (M4). Chemical abundances of O, Na, Mg, Al, Si, Ca, Sc, Ti, V, Cr, Fe, Co, Ni, Zn, Y, and Ce in AGB stars from high-resolution FLAMES+UVES@VLT spectra are reported for both clusters. Our spectroscopic results have been combined with multiwavelength photometry from the Hubble Space Telescope UV survey of Galactic GCs and ground-based photometry, as well as proper motions derived by combining stellar positions from ground-based images and Gaia DR1. Our analysis reveals that the AGBs of both clusters host multiple populations with different chemical compositions. In M4, we have identified two main populations of stars with different Na/O content lying on distinct AGBs in the m{sub F438W} versus C{sub F275W,F336W,F438W} and the V versus C{sub U,B,I} pseudo-color–magnitude diagrams. In the more massive and complex GC NGC 2808, three groups of stars with different chemical abundances occupy different locations on the so-called “chromosome map” photometric diagram constructed for AGB stars. The spectroscopic + photometric comparison of stellar populations along the AGB and the red giants of this GC suggests that the AGB hosts stellar populations with a range in helium abundances from primordial to high contents of Y∼0.32. By contrast, from our data set, there is no evidence for stars with extreme helium abundance (Y∼0.38) on the AGB, suggesting that the most He-rich stars of NGC 2808 do not reach this phase.

79 ASTRONOMY AND ASTROPHYSICS↗

Quasars with Proper Motions and the Link to Double and Multiple AGNs

Gaia used a large sample of photometrically selected active galactic nuclei (AGNs) and quasars to remove the residual spin of its global proper motion system in order to achieve a maximally inertial reference frame. A small fraction of these reference objects have statistically significant astrometric proper motions in Gaia EDR3. We compile a source sample of 105,593 high-fidelity AGNs with accurate spectroscopically determined redshifts above 0.5 from the SDSS and normalized proper motions below 4. The rate of genuinely perturbed proper motions is at least 0.17%. A smaller high completeness sample of 152 quasars with excess proper motions at a confidence level of 0.9995 is examined in detail. Pan-STARRS images and Gaia-resolved pairs reveal that 29% of the sample are either double sources or gravitationally lensed quasars. An Anderson–Darling test on parameters of a smaller high-reliability sample and their statistical controls reveals 17 significant factors that favor multiplicity and multi-source structure as the main cause of perturbed astrometry. Using a nearest-neighbor distance statistical analysis and counts of close companions in Gaia on a much larger initial sample of AGNs, an excess of closely separated sources in Gaia is detected. At least 0.33% of all optical quasars are genuinely double or multiply imaged. We provide a list of 44 candidate double or multiple AGNs and four previously known gravitational lenses. Many proper motion quasars may be more closely separated, unresolved doubles exhibiting the variability imposed motion effect, and a smaller fraction may be chance alignments with foreground stars causing weak gravitational lensing.

Astrometric microlensing effect↗

Structural phylogeny by profile extraction and multiple superimposition using electrostatic congruence as a discriminator

Phylogenetic analysis of proteins using multiple sequence alignment (MSA) assumes an underlying evolutionary relationship in these proteins which occasionally remains undetected due to considerable sequence divergence. Structural alignment programs have been developed to unravel such fuzzy relationships. However, none of these structure based methods have used electrostatic properties to discriminate between spatially equivalent residues. We present a methodology for MSA of a set of related proteins with known structures using electrostatic properties as an additional discriminator (STEEP). STEEP first extracts a profile, then generates a multiple structural superimposition providing a consolidated spatial framework for comparing residues and finally emits the MSA. Residues that are aligned differently by including or excluding electrostatic properties can be targeted by directed evolution experiments to transform the enzymatic properties of one protein into another. We have compared STEEP results to those obtained from a MSA program (ClustalW) and a structural alignment method (MUSTANG) for chymotrypsin serine proteases. Subsequently, we used PhyML to generate phylogenetic trees for the serine and metallo-β-lactamase superfamilies from the STEEP generated MSA, and corroborated the accepted relationships in these superfamilies. We have observed that STEEP acts as a functional classifier when electrostatic congruence is used as a discriminator, and thus identifies potential targets for directed evolution experiments. In summary, STEEP is unique among phylogenetic methods for its ability to use electrostatic congruence to specify mutations that might be the source of the functional divergence in a protein family. Based on our results, we also hypothesize that the active site and its close vicinity contains enough information to infer the correct phylogeny for related proteins.

59 BASIC BIOLOGICAL SCIENCES↗

First experimental study of multiple orientation muon tomography, with image optimization in sparse data environments

Due to the high penetrating power of cosmic ray muons, they can be used to probe very thick and dense objects. As charged particles, they can be tracked by ionization detectors, determining the position and direction of the muons. With detectors on either side of an object, particle direction changes can be used to extract scattering information within an object. This can be used to produce a scattering intensity image within the object related to density and atomic number. Such imaging is typically performed with a single detector-object orientation, taking advantage of the more intense downward flux of muons, producing planar imaging with some depth-of-field information in the third dimension. Several simulation studies have been published with multi-orientation tomography, which can form a three-dimensional representation faster than a single orientation view. In this work we present the first experimental multiple orientation muon tomography study. Experimental muon-scatter based tomography was performed using a concrete filled steel drum with several different metal wedges inside, between detector planes. Data was collected from different detector-object orientations by rotating the steel drum. The data collected from each orientation were then combined using two different tomographic methods. Results showed that using a combination of multiple depth-of-field reconstructions, rather than a traditional inverse Radon transform approach used for CT, resulted in more useful images for sparser data. As cosmic ray muon flux imaging is rate limited, the imaging techniques were compared for sparse data. Using the combined depth-of-field reconstruction technique, fewer detector-object orientations were needed to reconstruct images that could be used to differentiate the metal wedge compositions.

Applied Physics (physics.app-ph)↗

Multiple-amplifier sensing charged-coupled device: model and improvement of the node removal efficiency

The multiple-amplifier sensing charge-coupled device (MAS-CCD) has emerged as a promising technology for astronomical observation, quantum imaging, and low-energy particle detection due to its ability to reduce the readout time for the same readout noise level compared with its predecessor, the skipper-CCD, by reading out the same charge packet through multiple inline amplifiers. Previous works identified a new parameter in this sensor, called node removal inefficiency (NRI), related to inefficiencies in charge transfer and residual charge removal from the sense node of each amplifier after readout. These inefficiencies can lead to distortions in the measured signals similar to those produced by the charge transfer inefficiencies in standard CCDs. We introduce more details in the mathematical model of the NRI mechanism and provide techniques to quantify its magnitude from the measured data. It also proposes a new operation strategy that significantly reduces its effect with minimal alterations of the timing sequences or voltage settings for the other signals of the sensor. The proposed technique is demonstrated experimentally on a 16-amplifier MAS-CCD. At the same time, the experimental data demonstrate that this approach minimizes the NRI effect to levels comparable with other sources of distortion such as the charge transfer inefficiency in scientific devices.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Technical note: Simultaneous fully dynamic characterization of multiple input–output relationships in climate models

We introduce system identification techniques to climate science wherein multiple dynamic input–output relationships can be simultaneously characterized in a single simulation. This method, involving multiple small perturbations (in space and time) of an input field while monitoring output fields to quantify responses, allows for identification of different timescales of climate response to forcing without substantially pushing the climate far away from a steady state. We use this technique to determine the steady-state responses of low cloud fraction and latent heat flux to heating perturbations over 22 regions spanning Earth's oceans. We show that the response characteristics are similar to those of step-change simulations, but in this new method the responses for 22 regions can be characterized simultaneously. Moreover, we can estimate the timescale over which the steady-state response emerges. The proposed methodology could be useful for a wide variety of purposes in climate science, including characterization of teleconnections and uncertainty quantification to identify the effects of climate model tuning parameters.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of a quasi-steady-state approximation of the cloud droplet growth equation (QDGE) scheme for aerosol activation in global models using multiple aircraft data over both continental and marine environments

This research introduces a numerically efficient aerosol activation scheme and evaluates it by using stratus and stratocumulus cloud data sampled during multiple aircraft campaigns in Canada, Chile, Brazil, and China. The scheme employs a quasi-steady-state approximation of the cloud droplet growth equation (QDGE) to efficiently simulate aerosol activation, the vertical profile of supersaturation, and the activated cloud droplet number concentration (CDNC) near the cloud base. The calculated maximum supersaturation values using the QDGE scheme were compared with multiple parcel model simulations under various aerosol and environmental conditions. The differences are all below 0.18 %, indicating good performance and accuracy of the QDGE scheme. We evaluated the QDGE scheme by specifying observed environmental thermodynamic variables and aerosol information from 31 cloud cases as input and comparing the simulated CDNC with cloud observations. The average of mean relative error ($\overline{MRE}$) of the simulated CDNC for cloud cases in each campaign ranges from 17.30 % in Brazil to 25.90 % in China, indicating that the QDGE scheme successfully reproduces observed variations in CDNC over a wide range of different meteorological conditions and aerosol regimes. Additionally, we carried out an error analysis by calculating the maximum information coefficient (MIC) between the MRE and input variables for the individual campaigns and all cloud cases. MIC values were then sorted by aerosol properties, pollution level, environmental humidity, and dynamic condition according to their relative importance to MRE. Based on the error analysis, we found that the magnitude of MRE is more relevant to the specification of input aerosol pollution level in marine regions and aerosol hygroscopicity in continental regions than to other variables in the simulation.

54 ENVIRONMENTAL SCIENCES↗

Circuit provides accurate four-quadrant multiplication

Solid state circuit provides four-quadrant multiplication at frequencies ranging from dc to 100 cps using pulse-width and -height multiplication techniques. The circuit consumes little power and has an accuracy of approximately one percent.

Mc Gowan, G. F.↗

A multiple-beam spherical reflector antenna

A spherical reflector with multiple feeds is considered for application in communications satellite systems. Data are presented which show that spherical reflectors possessing relatively high gain (40 db) and very small phase path error are feasible. A design of a spherical reflector utilizing corrugated horn feeds is considered. Radiation patterns are computed using the physical-optics technique. The designed antenna is approximately 60 lambda in diameter. Calculations performed for this antenna with three beams indicate that each beam has a gain of about 42 db, a beamwidth of 1.4 deg, and sidelobes that can be expected to be at least 28 db down. These results indicate that the feature of low sidelobes makes the spherical reflector a consideration for a multiple-beam communications satellite antenna.

Woo, R.↗

Multiple-orifice liquid injection into hypersonic airstreams and applications to ram C-3 flight

Experimental data are presented for the oblique injection of water and three electrophilic liquids (fluorocarbon compounds) through multiple-orifice nozzles from a flat plate and the sides of a hemisphere-cone (0.375 scale of RAM C spacecraft) into hypersonic airstreams. The nozzle patterns included single and multiple orifices, single rows of nozzles, and duplicates of the RAM C-III nozzles. The flat-plate tests were made at Mach 8. Total pressure was varied from 3.45 MN/m2 to 10.34 MN/m2, Reynolds number was varied form 9,840,000 per meter to 19,700,000 per meter, and liquid injection pressure was varied from 0.69 MN/m2 to 3.5 MN/m2. The hemisphere-cone tests were made at Mach 7.3. Total pressure was varied from 1.38 MN/m2, to 6.89 MN/m2, Reynolds number was varied from 3,540,000 per meter to 17,700,000 per meter, and liquid-injection pressure was varied from 0.34 MN/m2 to 4.14 MN/m2. Photographs of the tests and plots of liquid-penetration and spray cross-section area are presented. Maximum penetration was found to vary as the square root of the dynamic-pressure ratio and the square root of the total injection nozzle area. Spray cross-section area was linear with maximum penetration. The test results are used to compute injection parameters for the RAM C-3 flight injection experiment.

Weaver, W. L.↗

A feedback control model for network flow with multiple pure time delays

A control model describing a network flow hindered by multiple pure time (or transport) delays is formulated. Feedbacks connect each desired output with a single control sector situated at the origin. The dynamic formulation invokes the use of differential difference equations. This causes the characteristic equation of the model to consist of transcendental functions instead of a common algebraic polynomial. A general graphical criterion is developed to evaluate the stability of such a problem. A digital computer simulation confirms the validity of such criterion. An optimal decision making process with multiple delays is presented.

Press, J.↗

The theoretical and experimental investigations on multiple pure tone noise.

An investigation on multiple pure tone (MPT) noise is described. The model fan is operated, in Freon 12, in a closed loop acoustical facility. It has been found experimentally that the rotor relative Mach number and incidence angle are parameters important to the evolution of the MPT sound and the inlet duct length has a significant influence on the MPT sound emission. The experimental results are compared with a previous analysis. From the known blade nonuniformities of the model fan, the MPT distributions are computed. The analysis correctly predicts the frequency of the dominant multiple pure tone and sound pressures of the blade passing frequency noise and the dominant MPT that are in the same range as the experimental values.

Kantola, R. A.↗

X-ray and gamma-ray imaging with multiple-pinhole cameras using a posteriori image synthesis.

In 1968, Dicke had suggested that multiple-pinhole camera systems would have significant advantages concerning the SNR in X-ray and gamma-ray astronomy if the multiple images could be somehow synthesized into a single image. The practical development of an image-synthesis method based on these suggestions is discussed. A formulation of the SNR gain theory which is particularly suited for dealing with the proposal by Dicke is considered. It is found that the SNR gain is by no means uniform in all X-ray astronomy applications.

Groh, G.↗

SERT 2 hollow cathode multiple restarts in space

Future missions, both station keeping and primary electric propulsion, will require multiple thrust restarts after periods of inactivity from a few hours to over one year. Although not a part of the original SERT 2 (Space Electric Rocket Test) flight objective, the opportunity to demonstrate multiple cathode restarts in space became available following completion of thruster running. Both neutralizer and main cathodes of each flight thruster were restarted repeatedly following storage periods up to 490 days. No deterioration of cathode heaters was noted nor was any change required in starting voltages or currents.

Kerslake, W. R.↗

Optimization of multiple target electric propulsion trajectories.

Development of the mathematical basis for the generation of multiple target low-thrust trajectories. The unique trajectory shaping capabilities of electric propulsion make it ideally suited for modifying the path of the spacecraft to effect close encounters of selected asteroids with only slight penalties in performance. Each intermediate encounter with an asteroid involves the optimization of four parameters, the encounter time and the three components of the relative velocity at encounter. A second type of mission amenable to this analysis is that of asteroid or comet sample return missions. For missions of this type, both launch date and division of departure and return flight times are capable of being optimized. Use is made of the traditional calculus of variations to derive the necessary conditions that must be satisfied for both types of missions. In addition, examples are presented of both a Comet Encke rendezvous mission with multiple encounters of the asteroids Aschera and Alekto and also a sample return mission from the asteroid Flora.

Sauer, C. G., Jr.↗