Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Methane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

The effect of regional groundwater on carbon dioxide and methane emissions from a lowland rainforest stream in Costa Rica

In the tropical rainforest at La Selva Biological Station in Costa Rica, regional bedrock groundwater high in dissolved carbon discharges into some streams and wetlands, with the potential for multiple cascading effects on ecosystem carbon pools and fluxes. We investigated carbon dioxide (CO 2 ) and methane (CH 4 ) degassing from two streams at La Selva: the Arboleda, where ~1/3 of the streamflow is from regional groundwater, and the Taconazo, fed exclusively by local groundwater recharged within the catchment. The regional groundwater inflow to the Arboleda had no measurable effect on stream gas exchange velocity, dissolved CH 4 concentration, or CH 4 emissions but significantly increased stream CO 2 concentration and degassing. CO 2 evasion from the reach of the Arboleda receiving regional groundwater (lower Arboleda) averaged 5.5 mol C m -2 d -1 , ~7.5x higher than the average (0.7 mol C m -2 d -1 ) from the stream reaches with no regional groundwater inflow (the Taconazo and upper Arboleda). Carbon emissions from both streams were dominated by CO 2 ; CH 4 accounted for only 0.06-1.70% of the total (average of both streams: 5 x10 -3 mol C m -2 d -1 ). Annual stream degassing fluxes normalized by watershed area were 48 and 299 g C m -2 for the Taconazo and Arboleda, respectively. CO 2 degassing from the Arboleda is a significant carbon flux, similar in magnitude to the average net ecosystem exchange estimated by eddy covariance. As a result, examining the effects of catchment connections to underlying hydrogeological systems can help avoid overestimation of ecosystem respiration and advance our understanding of carbon source/sink status and overall terrestrial ecosystem carbon budgets.

54 ENVIRONMENTAL SCIENCES↗

Depressurization-Induced Fines Migration in Sediments Containing Methane Hydrate: X-Ray Computed Tomography Imaging Experiments

Depressurization of hydrate-bearing sediments (HBS) can cause the movement of fine particles, and in turn, such fines migration affects fluid flow and mechanical behavior of sediments, ultimately affecting long-term hydrocarbon production and wellbore stability. In this work, we investigate how and to what extent depressurization of HBS causes fines migration using X-ray computed tomography (CT) imaging. Methane hydrate was synthesized in sediments with 10% fines content (FC), composed of sands with silt and/or clay, and the hydrate-bearing samples were stepwisely depressurized while acquiring CT images. The CT images were analyzed to quantify the spatial changes in FC in the host sediment and thus to capture the fines migration during depressurization. It was found that the FC changes began occurring from the hydrate dissociation regions. This confirms that the multiphase flow caused by depressurization accompanies fines migration. Depressurization of HBS with a hydrate saturation of ~20–40% caused FC reduction from ~10% to ~6–9%, and the extent of fines migration differed with the particle sizes of the host sands and the types of fines. It was found that fines migration was more pronounced with coarse sands and with silty fines. Such observed level of FC reduction is estimated to increase sediment permeability by several factors based on the Kozeny-type permeability model. In conclusion, our results support the notion that the extent of fines migration and its effect on fluid flow behavior need to be assessed in consideration of physical properties of host sediment and fine particles to identify optimum depressurization strategies.

42 ENGINEERING↗

Confined Ultrathin Pd-Ce Nanowires with Outstanding Moisture and SO 2 Tolerance in Methane Combustion

Here, an efficient strategy (enhanced metal oxide interaction and core–shell confinement to inhibit the sintering of noble metal) is presented confined ultrathin Pd-CeO x nanowire (2.4 nm) catalysts for methane combustion, which enable CH 4 total oxidation at a low temperature of 350 °C, much lower than that of a commercial Pd/Al 2 O 3 catalyst (425 °C). Importantly, unexpected stability was observed even under harsh conditions (800 °C, water vapor, and SO 2 ), owing to the confinement and shielding effect of the porous silica shell together with the promotion of CeO 2 . Pd-CeO x solid solution nanowires (Pd-Ce NW) as cores and porous silica as shells (Pd-CeNW@SiO 2 ) were rationally prepared by a facile and direct self-assembly strategy for the first time. Finally, this strategy is expected to inspire more active and stable catalysts for use under severe conditions (vehicle emissions control, reforming, and water–gas shift reaction).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational Identification and Experimental Demonstration of High‐Performance Methane Sorbents

Abstract Remarkable methane uptake is demonstrated experimentally in three metal‐organic frameworks (MOFs) identified by computational screening: UTSA‐76, UMCM‐152 and DUT‐23‐Cu. These MOFs outperform the benchmark sorbent, HKUST‐1, both volumetrically and gravimetrically, under a pressure swing of 80 to 5 bar at 298 K. Although high uptake at elevated pressure is critical for achieving this performance, a low density of high‐affinity sites (coordinatively unsaturated metal centers) also contributes to a more complete release of stored gas at low pressure. The identification of these MOFs facilitates the efficient storage of natural gas via adsorption and provides further evidence of the utility of computational screening in identifying overlooked sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanistic Studies of Continuous Partial Methane Oxidation on Cu−Zeolites Using Kinetic and Spectroscopic Methods

Abstract Over the past few decades, a significant amount of research effort has focused on investigating the active site requirements and reaction mechanisms for partial methane oxidation (PMO) to methanol over copper–exchanged zeolites during stoichiometric and stepwise chemical looping routes. More recently, research efforts have expanded to include investigating the PMO reaction in a continuous catalytic regime, primarily focusing on determining the influence of catalyst composition on Cu speciation and structure and, in turn, on PMO rate and selectivity. The structures of candidate Cu active sites are commonly studied using a combination of ex situ and in situ spectroscopic approaches. In this perspective, we critically examine the prior literature on catalytic PMO over Cu–zeolites to identify key knowledge gaps that remain in our understanding as motivation for future research efforts. We identify opportunities for future research to address these gaps by adapting analogous interrogation techniques that have been successfully used to elucidate the active site requirements and mechanistic details of another catalytic redox reaction cycle on Cu–zeolites, the selective catalytic reduction (SCR) of nitrogen oxides (NO x ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A multitower measurement network estimate of California's methane emissions

In this paper, we present an analysis of methane (CH 4 ) emissions using atmospheric observations from five sites in California's Central Valley across different seasons (September 2010 to June 2011). CH 4 emissions for spatial regions and source sectors are estimated by comparing measured CH 4 mixing ratios with transport model (Weather Research and Forecasting and Stochastic Time-Inverted Lagrangian Transport) predictions based on two 0.1° CH 4 (seasonally varying “California-specific” (California Greenhouse Gas Emission Measurements, CALGEM) and a static global (Emission Database for Global Atmospheric Research, release version 42, EDGAR42)) prior emission models. Region-specific Bayesian analyses indicate that for California's Central Valley, the CALGEM- and EDGAR42-based inversions provide consistent annual total CH 4 emissions (32.87 ± 2.09 versus 31.60 ± 2.17 Tg CO 2 eq yr -1 ; 68% confidence interval (CI), assuming uncorrelated errors between regions). Summing across all regions of California, optimized CH 4 emissions are only marginally consistent between CALGEM- and EDGAR42-based inversions (48.35 ± 6.47 versus 64.97 ± 11.85 Tg CO 2 eq), because emissions from coastal urban regions (where landfill and natural gas emissions are much higher in EDGAR than CALGEM) are not strongly constrained by the measurements. Combining our results with those from a recent study of the South Coast Air Basin narrows the range of estimates to 43–57 Tg CO2eq yr -1 (1.3–1.8 times higher than the current state inventory). Finally, these results suggest that the combination of rural and urban measurements will be necessary to verify future changes in California's total CH 4 emissions.

54 ENVIRONMENTAL SCIENCES↗

Modeling electron beam irradiation of methane

We built a chemical kinetic model for the electron beam irradiation of methane and report simulation results with dose rates ranging from 2 to 200 kGy s -1 at 298 K and 1 atm pressure. The model contains 92 species and 778 gas-phase reactions. We report the time evolution of concentrations of stable products (including H 2 , C 2 H 6 , C 3 H 8 , C 2 H 4 , C 3 H 6 , C 4 H 10 , C 2 H 2 , and C 3 H 4 ) as well as some radicals and ions. Here we discuss how yields of products depend on dose rate and how they change during the course of irradiation. To understand the processes controlling product formation, we quantify the extent to which various reactions produce and destroy major products and the key radicals and ions. Normalized sensitivity coefficients are computed for the production of stable products to gain further insight into factors controlling product yields. We were able to reduce the mechanism to 63 species and 331 reactions while incurring less than 5% error in the final concentrations of stable products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient collection and preparation of methane from low concentration waters for natural abundance radiocarbon analysis

Freshwater and marine environments constitute the largest global reservoirs of the greenhouse gas methane (CH 4 ) and natural abundance radiocarbon measurements ( 14 C-CH 4 ) can allow for high confidence interpretations about CH 4 dynamics operating in these environments. Collecting sufficient amounts of CH 4 sample for a standard, high precision 14 C-accelerator mass spectrometry (AMS) analysis (~ 200 μg carbon (C)) was previously unfeasible when sampling from low CH 4 concentration waters, such as much of the surface ocean (~ 2 nM), which would require collecting the CH 4 from 8500 L of seawater. The method described here involves pumping 20,000–40,000 L of seawater up from depth through a dissolved gas extraction system, which enables the collection of a sample composed of 100s of L of gas in less than 4 h on station. The large volume extracted gas sample is compressed into a 1.7 L cylinder for transport from the ship to the home laboratory. The home laboratory preparation of each sample to a CH 4 -derived carbon dioxide aliquot for 14 C-AMS analysis is carried out in 3 h on a flow-through vacuum line that simultaneously prepares aliquots for stable isotope analyses (δ 13 C-CH 4 and δ 2 H-CH 4 ). The total process blank of the method is small (5.0 μg CH 4 -C) and composes 1.2% of the average collected and prepared sample (424 ± 163 μg, from a recent campaign; n = 16). Finally, the 14 C-CH 4 blanks prepared on the vacuum line have acceptably low 14 C content (0.23 ± 0.07 percent Modern Carbon (pMC); n = 7) relative to the 14 C-dead (0 pMC) CH 4 from which they are prepared.

54 ENVIRONMENTAL SCIENCES↗

Soil incubations reproduce field methane dynamics in a subarctic wetland

A major challenge in peatland carbon cycle modeling is the estimation of subsurface methane (CH 4 ) and carbon dioxide (CO 2 ) production and consumption rates and pathways. The most common methods for modeling these processes are soil incubations and stable isotope modeling, both of which may involve departures from field conditions. To explore the impacts of these departures, we measured CH 4 /CO 2 concentration ratios and 13 C fractionation factors (α C , indicating CH 4 production pathways) in field pore water from a thawing subarctic peatland, and compared these values to those observed in incubations of corresponding peat samples. Incubation CH 4 /CO 2 production ratios were significantly and positively correlated with observed field CH 4 /CO 2 concentration ratios, though observed field ratios were ~20 % of those in incubations due to CH 4 ’s lower solubility in pore water. After correcting the field ratios for CH 4 loss with an isotope mass balance model, the incubation CH 4 /CO 2 ratios and α C were both significantly positively correlated with field ratios and α C (respectively), both with slopes indistinguishable from 1. Finally, although CH 4 /CO 2 ratios and α C were slightly higher in the incubations, these shifts were consistent along the thaw progression, indicating that ex situ incubations can replicate trends in in situ CH 4 production.

54 ENVIRONMENTAL SCIENCES↗

Raman Spectrum of Gaseous Propane in Methane

Pressure effects on the Raman spectrum of gaseous propane in methane are investigated. It is found that propane Raman bands located in the range 2700–3100 cm{sup –1} shift to lower frequencies although Raman bands in the range 300–1600 cm{sup –1} change negligibly as the density of the medium containing the analyzed propane increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A 3D-Printed Microresonator Based on the Quartz-Enhanced Photoacoustic Spectroscopy Sensor for Methane Detection

A 3D-printed microresonator based on a quartz tuning fork has been developed. The sensor performance is evaluated by detection of methane with a fiber-coupled distributed feedback diode laser. In combination with wavelength modulation spectroscopy, a minimum detectable concentration of 15.6 ppb by volume is achieved at atmospheric pressure with an 8-mW average optical excitation power and a lock-in amplifier time constant of 1 s, which corresponds to a 1σ normalized noise equivalent absorption coefficient of 5·10{sup –9} cm{sup –1}·W/Hz{sup 1/2}. An Allan variance analysis shows that the system has long-term stability and can serve as the basis for a portable gas analyzer. Approaches to improve the current sensor performance are also discussed. This design greatly reduces the time of manufacturing the microresonator.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Biocomposite Fiber-Matrix Treatments that Enhance In-Service Performance Can Also Accelerate End-of-Life Fragmentation and Anaerobic Biodegradation to Methane

Biodegradable resins can enhance the environmental sustainability of wood-plastic composites (WPCs) by enabling methane (CH{sub 4}) recovery via anaerobic digestion (AD). An under appreciated step in biocomposite AD is the role of cracking and fragmentation due to moisture uptake by the wood fiber (WF) fraction. Here, we use batch microcosms to simulate AD at end-of-life and to assess the effects of fiber-matrix treatments used to retard in-service moisture uptake. The composites evaluated were injection molded poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) with WF (0, 20%) using two fiber-matrix compatibilization treatments: (1) hydrophobic silane treatment of the wood fiber and (2) grafting of hydrophilic maleic anhydride groups to the PHBV matrix. Both treatments accelerated rates of mass loss and CH{sub 4} production by a factor of 1.2–2.3 compared to neat PHBV. The fragmentation rate, as measured by mass loss, increased significantly for treated samples compared to untreated samples. A ranking of test samples from lowest to highest rates of mass loss gave the following sequence: neat PHBV ≈ maleated PHBV < PHBV plus untreated WF < maleated PHBV plus untreated WF < PHBV plus silane-treated WF. Compared to the untreated samples, maleic anhydride treatment increased the mass loss rate by 30%, and silane treatment increased the mass loss rate by 92%. Onset of cracking in silane-treated composites was observed at 2 weeks (using X-ray micro-computed tomography). At the same time, solid mass loss and CH{sub 4} production peaked, implicating cracking and physical disintegration as the rate-limiting step for accelerated anaerobic degradation. When modified to account for bioplastic matrix degradation, a previously derived moisture-induced damage model could predict the onset of composite fragmentation at end-of-life. These results are significant for design of bio-WPCs and demonstrate that treatments designed to improve in-service performance can also improve end-of-life options.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methane adsorption on various metal-organic frameworks and determination of the average adsorption heats at supercritical temperatures and pressures

Adsorption of methane on three samples of metal-organic framework structures (MOF), which contain copper, aluminum or zinc atoms, was measured at temperatures ranging from 303 to 333 K and pressures up to 40 MPa using a precise volumetric-gravimetric unit. The determined values of adsorption volumes and characteristic energies served to evaluate the average heats of adsorption, which were compared to the average isosteric heats of adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TiO 2 Supported gold–palladium catalyst for effective syngas production from methane partial oxidation

The CO and H 2 (syngas) production from methane partial oxidation (MPO) using TiO 2 supported Au-Pd bimetallic catalysts are discussed. The supported Au, Pd and Au-Pd bimetallic nanoparticles were prepared by an incipient wetness impregnation or co-impregnation method and were characterized. The supported Au-Pd catalyst was selective for reforming and was more active compared to bare TiO 2 , TiO 2 supported Au only, or Pd only catalysts. The catalyst properties before and after MPO reaction were investigated, including the stability of the TiO 2 support, and the stability of Au and Pd nanoparticles. The supported Au-Pd catalyst has the highest TON (TON H2 = 23 at 650 °C), compared to supported Au catalyst (TON H2 < 1) and supported Pd catalyst (TON H2 < 1). Based on the analysis of outlet gases from the MPO reaction in a flow reactor, synergetic effects between Au and Pd, where Pd activates CH bonds while gold modulates the behavior of oxygen at the catalyst surface, are shown to contribute to MPO. Additionally, the Au-Pd/TiO 2 material shows long-term activity (>12 h) for the MPO reaction at 600 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bimetallic Mo-Co/ZSM-5 and Mo-Ni/ZSM-5 catalysts for methane dehydroaromatization: A study of the effect of pretreatment and metal loadings on the catalytic behavior

Here, methane dehydroaromatization is studied using different loadings (0.2 wt%, 0.6 and 1 wt%) of Co and Ni additives on a 6 wt% Mo/ZSM-5 catalyst to evaluate the promoting effect of Ni and Co on reactivity and stability of the catalysts. A synergy between Mo and the additives is observed when combining a reduction/carburization pretreatment with an optimum additive loading: benzene yield and catalytic stability are both improved. The fresh and spent samples were characterized by X-Ray Diffraction, 27 Al Magic-Angle Spinning Solid State Nuclear Magnetic Resonance Spectroscopy, Temperature-Programmed Reduction and Thermogravimetric Analysis. The results suggest that catalytic enhancement in precarburized Mo-Co and Mo-Ni samples is due to a combination of effects: extraction of Al from the ZSM-5 framework to form inactive Al 2 (MoO 4 ) 3 is reduced, interaction of Mo with the additives enhances the retention of Mo species within the zeolite channels, prevents Mo aggregation in reaction and modifies the reducibility of the Mo sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The superior hydrothermal stability of Pd/SSZ-39 in low temperature passive NOx adsorption (PNA) and methane combustion

We successfully synthesized uniform SSZ-39 with an average crystal size of about a micron. Pd (0.7 - 3 wt%) was supported on SSZ-39 with Si/Al ratio ~12. The as-synthesized materials were characterized by FTIR, XRD, Helium Ion Microscopy, HAADF-STEM imaging, 27 Al, 29 Si and H solid state NMR spectroscopic techniques. FTIR studies with CO and NO probe molecules reveal that the 0.7 wt% Pd/SSZ-39 material with Si/Al ~12 has the majority of Pd dispersed atomically as isolated Pd(II) and Pd(II)-OH centers, and thus can be used as a low-temperature passive NOx adsorber. Pd(II)-NO, Pd(II)(OH)(NO) and Pd(II)(CO)(NO) complexes form during PNA in this material. We compare this PNA material directly with the Pd/SSZ-13 system (with Si/Al ratio ~12) and show its superior hydrothermal stability. Remarkably, Pd/SSZ-39 with Si/Al ratio ~12 survives hydrothermal aging up to 815 ºC in 10% H 2 O/Air vapor for 16 hours without significant loss in activity. The SSZ-39 crystal structure remains intact during hydrothermal aging up to 1,000 ºC as we elucidate it with XRD and HAADF-STEM imaging/EDS mapping. However, changes to the framework during such harsh hydrothermal treatment significantly change the NOx release profiles during PNA as evidenced by high-field 27 Al NMR on fresh and aged Pd/SSZ-39 samples as well as PNA performance measurements. Besides PNA application, these hydrothermally very stable materials (3 wt% Pd on SSZ-39 with Si/Al ratio ~12) can be used as a robust methane combustion catalyst under industrially relevant conditions (GHSV~600,000hr -1 ). This catalyst shows minimal deactivation after both harsh hydrothermal aging at 750 and 800 ºC, and prolonged time on stream (105 hrs) at 425 °C. In contrast, both 3wt% Pd/alumina and 3wt% SSZ-13 supported samples lose a significant portion of their activity. Our study opens new avenues to prepare the most hydrothermally stable known Pd/zeolite materials with applications for adsorption and catalytic hydrocarbon combustion under industrially relevant conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ exsolution of bimetallic CoFe nanoparticles on (La,Sr)FeO 3 perovskite: Its effect on electrocatalytic oxidative coupling of methane

This study presents in-situ reduction of lanthanum strontium cobalt ferrite (LSCF) perovskite as an effective method for modifying its surface properties and enhancing its electrocatalytic reactivity for oxidative coupling of methane (OCM). The evolution of hetero-phases during the reduction of LSCF resulted in CoFe nanoparticles being formed at the surface. The in-situ reduced LSCF cell for OCM could be operated in either an ion pump or a fuel cell mode. High selectivity of 63% and 10.2% were reported for C 2+ hydrocarbons and C 3 H 6 , respectively. DFT calculations on LSCF and CoFe revealed that the high selectivity of C 2+ hydrocarbons on the LSCF primarily stems from the presence of CoFe nanoparticles. In-situ DRIFTS conducted under CH 4 proved that complete oxidation of CH 4 can be effectively inhibited by reducing LSCF, and control of oxygen supply is an important parameter for selective conversion of CH 4 to higher order hydrocarbon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical analysis of experimental studies of methane hydrate formation in a sandy porous medium

Here we analyse numerically an earlier experimental study that involved the formation of methane hydrates by the excess water method in a small reactor filled with a sandy porous medium, and seek to address questions about the type of the hydration reaction and the phase heterogeneity in the resulting hydrate-bearing sand. Using a fine discretization describing the reactor assembly, the experimental process is faithfully replicated numerically. The multi-stage process of hydrate formation is subdivided in 7 steps. The experimental data from the continuously-monitored pressure and temperature during each step are used for comparison against the numerical predictions, the identification of the dominant processes and the determination of the associated parameters through a history-matching process that minimizes deviations between observations and simulation results. The results of this first-ever study on this subject demonstrate unequivocally that the hydration reaction is a kinetic (as opposed to an equilibrium) process, and that the spatial distributions of the various phases (aqueous, gas and hydrate) at the end of the formation process are strongly heterogeneous. This has serious implications in simulation studies of hydrate dissociation that assume uniform initial phase saturation distributions. Finally, the history-matching process indicates that (a) the system behaviour is sensitive to some flow parameters (porosity and irreducible water saturation) only during the first water injection, (b) it is insensitive to the sand intrinsic permeability during all steps of the study, and (c) thermal processes dominate after the first water injection, yielding estimates of the thermal properties of the sand and of time-variable key parameters of the kinetic reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗