Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MULTIPLICATION FACTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Shape Optimization of Supersonic Turbines Using Response Surface and Neural Network Methods

Turbine performance directly affects engine specific impulse, thrust-to-weight ratio, and cost in a rocket propulsion system. A global optimization framework combining the radial basis neural network (RBNN) and the polynomial-based response surface method (RSM) is constructed for shape optimization of a supersonic turbine. Based on the optimized preliminary design, shape optimization is performed for the first vane and blade of a 2-stage supersonic turbine, involving O(10) design variables. The design of experiment approach is adopted to reduce the data size needed by the optimization task. It is demonstrated that a major merit of the global optimization approach is that it enables one to adaptively revise the design space to perform multiple optimization cycles. This benefit is realized when an optimal design approaches the boundary of a pre-defined design space. Furthermore, by inspecting the influence of each design variable, one can also gain insight into the existence of multiple design choices and select the optimum design based on other factors such as stress and materials considerations.

Papila, Nilay↗

Viral carcinogenesis: revelation of molecular mechanisms and etiology of human disease

The RNA and DNA tumor viruses have made fundamental contributions to two major areas of cancer research. Viruses were vital, first, to the discovery and analysis of cellular growth control pathways and the synthesis of current concepts of cancer biology and, second, to the recognition of the etiology of some human cancers. Transforming retroviruses carry oncogenes derived from cellular genes that are involved in mitogenic signalling and growth control. DNA tumor viruses encode oncogenes of viral origin that are essential for viral replication and cell transformation; viral oncoproteins complex with cellular proteins to stimulate cell cycle progression and led to the discovery of tumor suppressors. Viral systems support the concept that cancer development occurs by the accumulation of multiple cooperating events. Viruses are now accepted as bona fide etiologic factors of human cancer; these include hepatitis B virus, Epstein-Barr virus, human papillomaviruses, human T-cell leukemia virus type I and hepatitis C virus, plus several candidate human cancer viruses. It is estimated that 15% of all human tumors worldwide are caused by viruses. The infectious nature of viruses distinguishes them from all other cancer-causing factors; tumor viruses establish long-term persistent infections in humans, with cancer an accidental side effect of viral replication strategies. Viruses are usually not complete carcinogens, and the known human cancer viruses display different roles in transformation. Many years may pass between initial infection and tumor appearance and most infected individuals do not develop cancer, although immunocompromised individuals are at elevated risk of viral-associated cancers. Variable factors that influence viral carcinogenesis are reviewed, including possible synergy between viruses and environmental cofactors. The difficulties in establishing an etiologic role for a virus in human cancer are discussed, as well as the different approaches that proved viral links to cancer. Future directions for tumor virus studies are considered.

NASA Program Biomedical Research and Countermeasur↗

Simulation of Avifauna Distributions Using Remote Sensing

Remote sensing has proved a fruitful tool for understanding the distribution and functioning of plant communities at multiple scales and to understand their coupling to bioclimatic and anthropogenic factors. But a similar approach to understanding the distribution and abundance of bird species as well as many other animal organisms is lacking. The increasing need for such understanding is evident with the recent examples of threats to human health via avian vector transmission and the increasing emphasis on global conservation biology. From experimental observations we know that species richness tends to track biological or environmental gradients. In this paper, we explore the fundamental idea that thermal and water-relation environments of birds, as estimated from satellite data and biophysical models, can define the constraints on their Occurrences and richness. We develop individual bird energy budget models and use these models to define the climate space niche of birds. Using satellite data assimilation products to drive our models, we disperse a distribution of virtual or actual bird species across the landscape in accordance to the limits expressed by their climate space niche. Here, we focus on the North American summer breeding season and give two examples to illustrate our approach. The first is a tundra loving bird, e.g. corresponding to the Culidris genus, and a second genus example, Myiurchus, that corresponds to arid or semi-arid regions. We define these birds in terms of their basic physiology and morphological characteristics, construct avian energetic simulations to predict their allowable metabolic ranges and climate space limits.

Smith, James A.↗

Absolute Position of Targets Measured Through a Chamber Window Using Lidar Metrology Systems

Lidar is a useful tool for taking metrology measurements without the need for physical contact with the parts under test. Lidar instruments are aimed at a target using azimuth and elevation stages, then focus a beam of coherent, frequency modulated laser energy onto the target, such as the surface of a mechanical structure. Energy from the reflected beam is mixed with an optical reference signal that travels in a fiber path internal to the instrument, and the range to the target is calculated based on the difference in the frequency of the returned and reference signals. In cases when the parts are in extreme environments, additional steps need to be taken to separate the operator and lidar from that environment. A model has been developed that accurately reduces the lidar data to an absolute position and accounts for the three media in the testbed air, fused silica, and vacuum but the approach can be adapted for any environment or material. The accuracy of laser metrology measurements depends upon knowing the parameters of the media through which the measurement beam travels. Under normal conditions, this means knowledge of the temperature, pressure, and humidity of the air in the measurement volume. In the past, chamber windows have been used to separate the measuring device from the extreme environment within the chamber and still permit optical measurement, but, so far, only relative changes have been diagnosed. The ability to make accurate measurements through a window presents a challenge as there are a number of factors to consider. In the case of the lidar, the window will increase the time-of-flight of the laser beam causing a ranging error, and refract the direction of the beam causing angular positioning errors. In addition, differences in pressure, temperature, and humidity on each side of the window will cause slight atmospheric index changes and induce deformation and a refractive index gradient within the window. Also, since the window is a dispersive media, the effect of both phase and group indices have to be considered. Taking all these factors into account, a method was developed to measure targets through multiple regions of different materials and produce results that are absolute measurements of target position in three-dimensional space, rather than simply relative position. The environment in which the lidar measurements are taken must be broken down into separate regions of interest and each region solved for separately. In this case, there were three regions of interest: air, fused silica, and vacuum. The angular position of the target inside the chamber is solved using only phase index and phase velocity, while the ranging effects due to travel from air to glass to vacuum/air are solved with group index and group velocity. When all parameters are solved simultaneously, an absolute knowledge of the position of each target within an environmental chamber can be derived. Novel features of this innovation include measuring absolute position of targets through multiple dispersive and non-dispersive media, deconstruction of lidar raw data from a commercial off-the-shelf unit into reworkable parameters, and use of group velocities to reduce range data. Measurement of structures within a vacuum chamber or other harsh environment, such as a furnace, may now be measured as easily as if they were in an ambient laboratory. This analysis permits transformation of the raw data into absolute spatial units (e.g., mm). This technique has also been extended to laser tracker, theodolite, and cathetometer measurements through refractive media.

Kubalak, David↗

A Multiple Sphere T-Matrix Fortran Code for Use on Parallel Computer Clusters

A general-purpose Fortran-90 code for calculation of the electromagnetic scattering and absorption properties of multiple sphere clusters is described. The code can calculate the efficiency factors and scattering matrix elements of the cluster for either fixed or random orientation with respect to the incident beam and for plane wave or localized- approximation Gaussian incident fields. In addition, the code can calculate maps of the electric field both interior and exterior to the spheres.The code is written with message passing interface instructions to enable the use on distributed memory compute clusters, and for such platforms the code can make feasible the calculation of absorption, scattering, and general EM characteristics of systems containing several thousand spheres.

Mackowski, D. W.↗

A Theoretical Model of Static and Dynamic Field-of-View (FOV) using NASA's Neutral Buoyancy Laboratory (NBL)

Developing an objective field-of-view methodology for studying vehicle window placement has been somewhat difficult. It is not surprising that considerable effort has been directed at specific problems of visibility from vehicles. Aeronautical design engineers know when designing an aircraft cockpit, the pilot must have an adequate view for approaching and landing on an airfield. However, compromise between the ergonomic preference for the largest possible viewing envelope and the practicalities of arranging a structure that is lightweight and strong will always plague the cockpit’s transparent area’s size and shape. The human’s visual sense, when operating any kind of vehicle, is the main source of the vast majority of information needed to drive or fly safely. However, vehicle design can affect a driver’s visual performance for satisfying their need for information. For any vehicle, be it an automobile or a spacecraft, the visibility quantity is the sum total of the visual access to the environment as defined by the window placement of that vehicle. The Alternate Multiple Mission Space Exploration Vehicle (AMMSEV) configuration is much like a large cargo truck where there is no direct visual access to the rear of the vehicle or the rear sides of the vehicle; thus, making the forward and side views of greater importance to the situational awareness of the crew if obstructions are creating visual issues. The National Aeronautics and Space Administration (NASA) tested a new theoretical model for Field-of-View (FOV) of spacecraft windows in NASA’s own Neutral Buoyancy Laboratory (NBL). The NBL is an essential tool for design, testing and development of future space exploration hardware for upcoming NASA operational missions. Using water, with its natural propensity for giving a human the perception of dynamic body motion under a weightless or partial gravity conditions, gives human factors investigators a vigorous space-like environment to study new methods of collecting dynamic field-of-view for future exploration vehicle designs.

Human Factors↗

Electric Vehicles for Fleets

Electric vehicles (EVs) can fulfill many daily driving needs, making them a great solution for fleets. They offer several benefits and can fill roles in light-duty, medium-/heavy-duty (MD/HD), and even off-road applications. The unique fleet environment presents considerations beyond those that consumers must address before going electric. For example, fleet managers must understand the impacts of charging multiple vehicles while maintaining fleet operations. Larger MD/HD vehicles bring additional factors to consider.

ADVANCED PROPULSION SYSTEMS↗

Electric Vehicles for Fleets

Electric vehicles can fulfill many daily driving needs, making them a great solution for fleets. They offer several benefits and can fill roles in light-duty, medium-/heavy-duty (MD/HD), and even off-road applications. The unique fleet environment presents considerations beyond those that consumers must address before going electric. For example, fleet managers must understand the impacts of charging multiple vehicles while maintaining fleet operations. Larger MD/HD vehicles bring additional factors to consider.

charging↗

SAHA-induced TRAIL-sensitisation of Multiple Myeloma cells is enhanced in 3D cell culture

Background: Multiple Myeloma (MM) is currently incurable despite many novel therapies. Tumour Necrosis Factor-Related Apoptosis-Inducing Ligand (TRAIL) is a potential anti-tumour agent although effects as a single agent are limited. In this study, we investigated whether the Histone Deacetylase (HDAC) inhibitor SAHA can enhance TRAIL-induced apoptosis and target TRAIL resistance in both suspension culture, and 3D cell culture as a model of disseminated MM lesions that form in bone. Methods: The effects of SAHA and/or TRAIL in 6 Multiple Myeloma cell lines were assessed in both suspension cultures and in an Alginate-based 3D cell culture model. The effect of SAHA and/or TRAIL was assessed on apoptosis by assessment of nuclear morphology using Hoechst 33342/Propidium Iodide staining. Viable cell number was assessed by CellTiter-Glo luminescence assay, Caspase-8 and -9 activities were measured by Caspase-Glo™ assay kit. TRAIL-resistant cells were generated by culture of RPMI 8226 and NCI-H929 by acute exposure to TRAIL followed by selection of TRAIL-resistant cells. Results: TRAIL significantly induced apoptosis in a dose-dependent manner in OPM-2, RPMI 8226, NCI-H929, U266, JJN-3 MM cell lines and ADC-1 plasma cell leukaemia cells. SAHA amplified TRAIL responses in all lines except OPM-2, and enhanced TRAIL responses were both via Caspase-8 and -9. SAHA treatment induced growth inhibition that further increased in the combination treatment with TRAIL in MM cells. The co-treatment of TRAIL and SAHA reduced viable cell numbers all cell lines. TRAIL responses were further potentiated by SAHA in 3D cell culture in NCI-H929, RPMI 8226 and U266 at lower TRAIL + SAHA doses than in suspension culture. However TRAIL responses in cells that had been selected for TRAIL resistance were not further enhanced by SAHA treatment. Conclusions: SAHA is a potent sensitizer of TRAIL responses in both TRAIL sensitive and resistant cell lines, in both suspension and 3D culture, however SAHA did not sensitise TRAIL-sensitive cell populations that had been selected for TRAIL-resistance from initially TRAIL-sensitive populations. SAHA may increase TRAIL sensitivity in insensitive cells, but not in cells that have specifically been selected for acquired TRAIL-resistance. - Highlights: • The HDAC inhibitor SAHA sensitised Myeloma cells to TRAIL-induced apoptosis. • TRAIL, SAHA and combination apoptotic responses are potentiated in 3D cell culture. • TRAIL-resistant cells are not further sensitised to TRAIL-induced apoptosis by SAHA.

60 APPLIED LIFE SCIENCES↗

An Application of a Modified Beta Factor Method for the Analysis of Software Common Cause Failures

This paper presents an approach for modeling software common cause failures (CCFs) within digital instrumentation and control (I&C) systems. CCFs consist of a concurrent failure between two or more components due to a shared failure cause and coupling mechanism. This work emphasizes the importance of identifying software-centric attributes related to the coupling mechanisms necessary for simultaneous failures of redundant software components. The groups of components that share coupling mechanisms are called common cause component groups (CCCGs). Most CCF models rely on operational data as the basis for establishing CCCG parameters and predicting CCFs. This work is motivated by two primary concerns: (1) a lack of operational and CCF data for estimating software CCF model parameters; and (2) the need to model single components as part of multiple CCCGs simultaneously. A hybrid approach was developed to account for these concerns by leveraging existing techniques: a modified beta factor model allows single components to be placed within multiple CCCGs, while a second technique provides software-specific model parameters for each CCCG. This hybrid approach provides a means to overcome the limitations of conventional methods while offering support for design decisions under the limited data scenario.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Toward Establishing Uniqueness of Experimentally Determined Transference Numbers

The passage of current through a battery results in the development of concentration gradients in the electrolytic phase. For a fully characterized binary electrolyte, where the conductivity, salt diffusion coefficient, cation transference number, and the thermodynamic factor are known, concentration and potential gradients in the electrolytic phase can be modeled using Newman’s concentrated solution theory. We report two methods for measuring the transference number: the standard method based on electrochemical measurements ( t + , echem 0 ) and electrophoretic NMR ( t + , eNMR 0 ). The electrochemical approach requires combining measurements from multiple experiments; the equations used to determine the cation transference number and the thermodynamic factor are coupled, nonlinear algebraic equations. In the electrophoretic-NMR-based approach, however, the equations used to determine the cation transference number and the thermodynamic factor are decoupled. We find for a liquid electrolyte comprised of a lithium salt dissolved in tetraglyme, the values of the transference numbers obtained by these two methods are distinct. For example, at 30 °C, t + , echem 0 = −1.02 ± 1.11 and t + , eNMR 0 = 0.25 ± 0.04. The corresponding thermodynamic factors are also different. While the magnitude of the predicted concentration gradients based on the two sets of parameters are different, the predicted current-voltage relationships are similar.

Hickson, Darby T. (ORCID:0000000251339755)↗

Using solar eclipse events to validate VIIRS reflective solar band calibration at multiple radiance levels

The VIIRS instruments aboard the SNPP and NOAA-20 (N20) satellites have 14 reflective solar bands (RSB) covering a spectral range from 412 nm to 2250 nm. The radiance of each VIIRS RSB is calculated from a quadratic function of the background-subtracted digital count, 𝑑𝑛, with the quadratic coefficients determined during pre-launch testing. On orbit, calibration is maintained using observations of a sunlit solar diffuser (SD), which views the Sun every orbit through a fixed attenuation screen. The SD observations, which are at nearly the same radiance level every orbit, provide a time varying overall calibration adjustment factor, the F-factor. But there is no designed on-orbit mechanism for calibration at multiple radiance levels, so the relative strengths of the quadratic coefficients continue to be fixed at the pre-launch values. On a few rare occasions, the VIIRS instruments have passed through a partial solar eclipse during the part of the satellite orbit when the SD is illuminated by the Sun (near the South Pole). As of August 2019, the SNPP and N20 VIIRS SDs have observed five and three partial solar eclipses, respectively. While these events are rare, they offer a unique opportunity to test the RSB calibration using the SD at different radiance levels. In this paper, we compare the reduction in the measured SD signals during an eclipse to the predicted radiance reduction based on the Sun-Moon geometry and a solar radiance model. We find good agreement between the data and model for all events, indicating that the VIIRS RSB gain linearity has remained fairly stable on-orbit. The most significant deviation is for the N20 short-wave infrared bands, which had non-linearity concerns during pre-launch testing. We also investigate the SNPP results using different versions of the prelaunch quadratic gain coefficients.

solar eclipse↗

A SEARCH FOR C II 158 {mu}m LINE EMISSION IN HCM 6A, A Ly{alpha} EMITTER AT z = 6.56

We report a Plateau de Bure Interferometer search for C II 158 {mu}m emission from HCM 6A, a lensed Ly{alpha} emitter (LAE) at z = 6.56. Our non-detections of C II 158 {mu}m line emission and 1.2 mm radio continuum emission yield 3{sigma} limits of L{sub CII} < 6.4 x 10{sup 7} x ({Delta}V/100 km s{sup -1}){sup 1/2} L{sub Sun} for the C II 158 {mu}m line luminosity and S{sub 1.2mm} < 0.68 mJy for the 1.2 mm flux density. The local conversion factor between L{sub CII} and the star formation rate (SFR) yields an SFR < 4.7 M{sub Sun} yr{sup -1}, Almost-Equal-To 2 times lower than that inferred from the ultraviolet (UV) continuum, suggesting that the local factor may not be applicable in high-z LAEs. The non-detection of 1.2 mm continuum emission yields a total SFR < 28 M{sub Sun} yr{sup -1}; any obscured star formation is thus within a factor of two of the visible star formation. Our best-fit model to the rest-frame UV/optical spectral energy distribution of HCM 6A yields a stellar mass of 1.3 Multiplication-Sign 10{sup 9} M{sub Sun} and an SFR of Almost-Equal-To 10 M{sub Sun} yr{sup -1}, with negligible dust obscuration. We fortuitously detect CO J = 3-2 emission from a z = 0.375 galaxy in the foreground cluster A370, and obtain a CO line luminosity of L'(CO) > (8.95 {+-} 0.79) Multiplication-Sign 10{sup 8} K km s{sup -1} pc{sup 2} and a molecular gas mass of M(H{sub 2}) > (4.12 {+-} 0.36) Multiplication-Sign 10{sup 9} M{sub Sun }, for a CO-to-H{sub 2} conversion factor of 4.6 M{sub Sun} (K km s{sup -1} pc{sup 2}){sup -1}.

79 ASTRONOMY AND ASTROPHYSICS↗

Data sharing and retrieval using OAI-PMH

There is a growing consensus for the need to store and archive digital data, particularly for publicly funded research. Long-term preservation of that data generally requires some form of institutional archive, such as those directed to particular scientific communities of practice. Given that data is often of use to multiple communities of practice, which may have differing norms for data and metadata structure and semantics, effective standards for data and metadata exchange are important factors for users to be able to find and retrieve data. Toolsets that provide a coherent presentation of information across multiple standards are important for data search and access. One such toolset, Mercury, is a open-source metadata harvesting, data discovery, and access system, built for researchers to search for, share and obtain spatiotemporal data used across a range of climate and ecological sciences. Mercury is used across multiple projects to provide a coherent search interface for spatiotemporal data described in any of several metadata formats. Mercury has recently been extended to enable harvesting and distribution of metadata using the Open Archive Initiative Protocol for Metadata Handling (OAI-PMH). In this paper we describe Mercury s capabilities with multiple metadata formats, in general, and, more specifically, the results of our OAI-PMH implementations and the lessons learned.

99 GENERAL AND MISCELLANEOUS↗

In-flight radiometric calibration of the airborne visible/infrared imaging spectrometer (AVIRIS)

A reflectance-based method was used to provide an analysis of the in-flight radiometric performance of AVIRIS. Field spectral reflectance measurements of the surface and extinction measurements of the atmosphere using solar radiation were used as input to atmospheric radiative transfer calculations. Five separate codes were used in the analysis. Four include multiple scattering, and the computed radiances from these for flight conditions were in good agreement. Code-generated radiances were compared with AVIRIS-predicted radiances based on two laboratory calibrations for a uniform highly reflecting natural dry lake target. For one spectrometer, the pre- and post-season calibration factors were found to give identical results, and to be in agreement with the atmospheric models that include multiple scattering. Results for the other spectrometers were widely at variance with the models no matter which calibration factors were used. Potential causes of these discrepancies are discussed.

Conel, James E.↗

Temperature gradients for thermophysical and thermochemical property measurements to 3000 °C for an aerodynamically levitated spheroid

This study examines thermal gradients in ceramic oxide spheroids being aerodynamically levitated in a conical nozzle levitator (CNL) system equipped with a CO 2 laser (10.6 μm wavelength). The CNL system is a versatile piece of equipment that can easily be coupled with advanced thermophysical and thermochemical measuring devices, such as diffraction/scattering (X-ray and neutron), nuclear magnetic resonance, and calorimetry, for the analysis of bulk spheroidal solids and liquids. The thermal gradients of a series of single crystal, polycrystalline solids, and liquid spheroids have been measured spatially in the CNL system, by means of a disappearing filament pyrometer (800-3000 °C) and by X-ray diffraction with reference to an internal standard (Pt: 800-1600 °C). The thermal gradient in a levitated sample being heated by a laser from the top can be minimized by: (i) maximizing the sphericity, (ii) maximizing the density, and (iii) minimizing microstructural features. A spheroid with these properties can be manufactured via machining a perfect sphere from a highly dense, chemically and phase pure pellet. These properties promote rotation of the sample about multiple axes in the air stream, enabling homogeneous heating. This homogeneous heating is the dominant factor in reducing thermal gradients in solid state samples. It was found that the thermal gradient in an similar to 3 mm diameter solid sample could be reduced from 1000 °C to 30 °C, by having a perfectly spherical shape that could rotate on multiple axes in a high velocity gas stream (similar to 1500-2000 cm 3 /min). As a result, these findings will allow accurate thermophysical and thermochemical property measurements of solids in situ at high temperatures, using the CNL system.

47 OTHER INSTRUMENTATION↗

Mechanistic roles of microRNAs in hepatocarcinogenesis: A study of thioacetamide with multiple doses and time-points of rats

Environmental chemicals exposure is one of the primary factors for liver toxicity and hepatocarcinoma. Thioacetamide (TAA) is a well-known hepatotoxicant and could be a liver carcinogen in humans. The discovery of early and sensitive microRNA (miRNA) biomarkers in liver injury and tumor progression could improve cancer diagnosis, prognosis, and management. To study this, we performed next generation sequencing of the livers of Sprague-Dawley rats treated with TAA at three doses (4.5, 15 and 45 mg/kg) and four time points (3-, 7-, 14- and 28-days). Overall, 330 unique differentially expressed miRNAs (DEMs) were identified in the entire TAA-treatment course. Of these, 129 DEMs were found significantly enriched for the “liver cancer” annotation. These results were further complemented by pathway analysis (Molecular Mechanisms of Cancer, p53-, TGF-β-, MAPK- and Wnt-signaling). Two miRNAs (rno-miR-34a-5p and rno-miR-455-3p) out of 48 overlapping DEMs were identified to be early and sensitive biomarkers for TAA-induced hepatocarcinogenicity. We have shown significant regulatory associations between DEMs and TAA-induced liver carcinogenesis at an earlier stage than histopathological features. Most importantly, miR-34a-5p is the most suitable early and sensitive biomarker for TAA-induced hepatocarcinogenesis due to its consistent elevation during the entire treatment course.

60 APPLIED LIFE SCIENCES↗

Representation of the Physiological Factors Contributing to Postflight Changes in Functional Performance Using Motion Analysis Software

Astronauts experience changes in multiple physiological systems due to exposure to the microgravity conditions of space flight. To understand how changes in physiological function influence functional performance, a testing procedure has been developed that evaluates both astronaut postflight functional performance and related physiological changes. Astronauts complete seven functional and physiological tests. The objective of this project is to use motion tracking and digitizing software to visually display the postflight decrement in the functional performance of the astronauts. The motion analysis software will be used to digitize astronaut data videos into stick figure videos to represent the astronauts as they perform the Functional Tasks Tests. This project will benefit NASA by allowing NASA scientists to present data of their neurological studies without revealing the identities of the astronauts.

Parks, Kelsey↗