SEARCH · Engineering Papers

Results for “MITIGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

All sources NASA NTRS DOE OSTI

NASA NTRS2023

Computational Study of Vortex-Induced Separation for a 5-Bladed Rotor

This work computationally investigated the rotor blade vortex-induced separation recently observed during an aerodynamic rotor test campaign in the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel. Two separate approaches (i.e., airfoil modification and blade tip modification) were studied to mitigate the vortex-induced separation. Low-fidelity tools based on blade element momentum theory were shown to mispredict the rotor inflow and were also shown to not capture the vortex-induced separation caused by perpendicular blade-vortex interaction. This misprediction was exploited to isolate the aerodynamic thrust deficit caused by the vortex-induced separation (i.e., 20%) from the thrust deficit due to inflow variation (i.e., 31%). High-fidelity tools were shown to reasonably predict aerodynamic forces within 13% and flow separation when compared to experimental results. The modified airfoil variant of the baseline rotor effectively mitigated the vortex-induced separation while the blade tip modified variant still showed separation, though the size and strength of the vortex was reduced. Acoustic predictions were underpredicted by 10 dB from preliminary measurements taken in the untreated wind tunnel. Broadband noise contributions from different rotor blade sections showed that self-noise due to flow separation and other turbulent boundary layer mechanisms was the dominant noise source for all three rotor cases, followed by blade-wake interaction noise caused by perpendicular blade-vortex interactions.

aerodynamics↗

NASA NTRSDate not supplied

Consequences of Asteroid Characterization on the State of Knowledge about Inferred Physical Properties and Impact Risk

Physical characteristics of Near-Earth Objects (NEOs) are essential inputs to planetary defense assessments. The size, density, and strength of an NEO are critical inputs to modeling behavior during atmospheric entry as well as assessing the risk of impact. Similarly, knowledge of the physical characteristics of an object are necessary to evaluate the probable result of a mitigation mission. Usually, these attributes cannot be directly measured, but increasingly sophisticated methods have been developed to infer physical properties from related measurements of asteroids, meteors, and/or meteorites. Fortuitously, some of these measurements have been obtained for enough NEOs to elucidate the distribution of values across the sampled population. However, the situation becomes more challenging when considering a specific asteroid, since it is unlikely that all the relevant measurements have been made for any given object. We have developed a Bayesian network that can combine available information about a particular NEO with knowledge of the larger population to infer probabilistic values and uncertainties for physical characteristics of interest. Distributions of asteroid population albedos, taxonomic classes, and macroporosities, along with meteorite density distributions and associations between taxonomic classes and meteorite classes, provide the default distributions for the network’s parameter nodes. The inference network links parameters for each virtual asteroid either deterministically or probabilistically as appropriate, and eliminates any unphysical combinations of parameters. Within the context of planetary defense, our Bayesian network can be used to constrain the ranges of likely impactor properties, which can subsequently reduce the uncertainty in modelling of atmospheric entry, mitigation efficacy, and impact risk assessment. When additional measurements become available for a specific object, the network incorporates those measurements to generate virtual asteroids with property distributions that are consistent with the measurements. We will use the 2023 PDC scenario to demonstrate how the inference network can be combined with plausible characterization measurements to refine the state of knowledge about likely combinations of physical parameters and the resulting impact risk.

risk assessment↗

NASA NTRS2020

Life-Limiting Factors of the CMTS for Precision Pointing Observatory Missions

Development of the next generation Colloid Micronewton Thruster System (CMTS) has focused on incorporation of complete redundancy, and extension of life beyond the 3,458 hrs previously demonstrated to the >40,000 hrs necessary for future missions. The present life- limiting factor of the CMTS is impingement of the electrospray beam onto the electrostatic grids, which is mitigated by the use of porous grid structures to adsorb and trap the small fraction (typically <0.5%) of the beam that intercepts the grids. A detailed alignment survey using a single emitter electrospray source has been performed in order to establish thruster production requirements and produce data necessary for lifetime model validation. Capillary emitter tilt (Θ), lateral displacement (X), and source spacing (Z), where independently assessed for their impact on changes in grid interception, as well as combined lateral and tilt displacement. Throughout testing, incremental improvements were made to reduce facility effects that impacted measured results. The data validate the alignment tolerances used in design and fabrication of the CMTS. Increased interception was not observed until emitter tilt exceeded 3X, lateral misalignment exceeded 5X, and emitter spacing >1.5X tolerance requirements. Results also indicate that, at target grid impingement levels <0.5%, facility effects begin to dominate measured grid currents and must be mitigated for more accurate assessments of thruster life.

Ziemer, John K.↗

NASA NTRS2022

Remote Diagnosis and Operational Response to an In-Flight Failure of the Drill Feed Mechanism Onboard the Mars Science Laboratory Rover

On November 30th, 2016 (Sol 1536 of the mission), the Mars Science Laboratory (MSL) flight operations team commanded the Curiosity rover to drill into a Martian rock to acquire the mission’s 16th rock powder sample. The drilling operation was halted when the drill feed mechanism unexpectedly stalled shortly after disengaging its magnetically-actuated friction brake at the start of a long move to extend the drill bit into contact with the target rock. The drilling campaign was put on hold and later abandoned as diagnostic experimentation revealed a tendency for the actuator to transition in and out of a high-drag state in which the mechanism could not actuate. In the subsequent months, the team conducted a variety of in-flight and ground-based investigations to determine root cause and identify mitigation strategies for continued operation. Mechanism reliability continued to degrade and by June 2017, it became clear that the mechanism could not be relied upon to support drilling operations. The team succeeded in fully extending the feed, enabling the development of new sampling techniques that would not rely on the feed mechanism. The first feed-extended drilling sample was successfully collected on Sol 2057, 521 sols after the initial feed stall. This paper discusses the anomaly investigation process, failure analysis, and feed mechanism operation mitigation strategies. It concludes with key lessons learned about mechanism design, mission architecture, and operational best practices.

Lin, Megan Richardson↗

NASA NTRSDate not supplied

Assessment of HAB Particulate Tracing in EMU Helmet in Support of Eva 80

After water was reported in the EMU helmet during ISS US EVA-80, mitigation strategies were created to attempt to arrest the motion of any droplets that enter the helmet for future Extravehicular Activities (EVAs). This included adding absorbent materials into the interior of the helmet. But before a mitigation strategy can be implemented, it must first be proven to be safe. Towards this aim, a computational fluid dynamics (CFD) analysis was done tracing the paths of particulates potentially generated by the absorbent material. The objective was to characterize the risk these particulates pose for inspiration and eye irritation by tracking what percentage of particulates contact the suit-wearer’s face, eyes, or mouth. The model consisted of a human mannikin head and torso inside the EMU suit and helmet. The software used was ANSYS Fluent, with discrete phase modeling enabled to generate and track the particulates within the ventilation flow of the helmet.

Abigail Baukus↗

NASA NTRSDate not supplied

Pressurized Rover Lunar Surface Windows Thermal Trade Study

The pressurized rover (PR) is a habitable lunar vehicle that supports up to two crew members and EVAs. The PR is expected to operate with a crew at the lunar south pole for up to 30 consecutive days. Lunar surface missions represent a significant thermal challenge due in part to the extreme changes in temperature environment. Minimizing heat leaks is essential to be able to survive cold phases of lunar surface missions. Windows in particular can be a significant source of heat leak when designed without thermal performance in mind. In addition, correctly modeling windows, and transparent materials in general, represents a significant thermal challenge. It can also be challenging to obtain accurate radiative properties for modern window materials. This study focuses on the modeling approach, results, and possible window heat leak mitigation techniques for pressurized rover. Mitigation techniques explored in this study include low emissivity coatings and removable internal or external covers. Window layup, geometry, and size are also assessed in this study for their impact to heat leak.

Sydney June Taylor↗

NASA NTRS2023

Southern Rockies Western Slope Agriculture: Identifying Drivers of Rangeland Production for Drought Planning on the Western Slope of the Southern Rockies

Over the last decade, the southern Rocky Mountains of the United States experienced severe and variable drought. Local ranchers and landowners have reported strain on their operations, citing decreasing forage for their cattle and a need to adjust their business models. This study identified Major Land Resource Area-48 (MLRA-48) and northwestern Colorado as the key region for analysis. NASA DEVELOP partnered with the BLM Colorado River Field Office, Colorado State University Extension, USDA Forest Service, and the National Drought Mitigation Center to address concerns regarding the efficacy of remotely sensed rangeland production platforms and identify early warning climatic indicators of drought. The study identified two key platforms, The Rangeland Productivity Monitoring Service (RPMS) and Rangeland Analysis Platform (RAP), which use NASA Landsat 5 TM, Landsat 7 ETM+, Landsat 8 OLI, and Landsat 9 OLI-2 to estimate rangeland biomass. We regressed these with in situ biomass data to validate their efficacy and found that RAP was more effective than RPMS in estimating rangeland biomass, though it presents a tendency to overestimate. Our study performed a random forest analysis, comparing monthly RAP biomass estimates to a variety of climate variables, including mean precipitation, temperature, Palmer Drought Severity Index, snow water equivalent, snow persistence from Terra MODIS, wind speed and direction, and vapor pressure deficit. We determined that vapor pressure deficit and precipitation are key indicators in predicting forage production in MLRA-48. Our climate analysis provided our partners with greater understanding of the influence of various climate variables in determining rangeland production and allows them to assist land managers in drought mitigation.

remote sensing↗

NASA NTRS2022

Near-Earth Object Surveyor Overview

The Near-Earth Object (NEO) Surveyor is designed to detect, categorize and characterize Near-Earth Objects (NEOs) using infrared imaging. The project was approved to enter the preliminary design phase (Phase B) in FY21 after an extended Concept Development Phase (Phase A). The NEO Surveyor project responds to US Public Law 109-155[1], National Research Council’s report “Defending Planet Earth: Near-Earth Object Surveys & Hazard Mitigation Strategies (2010)”[2], the U. S. National Near-Earth Object Preparedness Strategy and Action Plan (June 2018)[3], and the objectives of NASA’s Planetary Defense Coordination Office (PDCO). The goals of the NEO Surveyor project are to: (1) identify impact hazards to the Earth posed by NEOs (defined as asteroids and comets that come within 1.3 AU of the Sun) by performing a comprehensive survey of the NEO population; (2) obtain detailed physical characterization data for individual objects that are likely to pose an impact hazard; (3) characterize the entire population of potentially hazardous NEOs to inform potential mitigation strategies. The mission will make significant progress toward the George E. Brown, Jr. NEO Survey Program objective defined by the U. S. Congress of detecting, tracking, cataloging, and characterizing at least 90% of NEOs equal to or larger than 140 m in diameter. The project is a collaboration between NASA-JPL, the University of Arizona (UA) and industry, with Ball Aerospace notably providing the spacecraft and key instrument elements. This paper will describe the overall NEO Surveyor Project objectives, initial spacecraft and instrument design and development plans and mission concept.

Veto, Michael↗

NASA NTRSDate not supplied

Habitability Assessments And Lessons-learned From 3-day And 11-day Enriched Oxygen Hypobaric Chamber Tests At NASA Johnson Space Center

INTRODUCTION: Decompression sickness (DCS) is a risk to the health and performance of astronauts and high-altitude aircrew. Tolerance to flammability, hypoxia, prebreathe duration, and DCS risk varies across different organizations, vehicles, suits, and destinations, necessitating a variety of DCS risk mitigation approaches. Existing models of altitude DCS risk are often insufficient to enable accurate risk-informed decisions during hardware development, mission planning, and flight operations. METHODS: NASA completed outfitting of a dedicated facility at Johnson Space Center to support testing of up to eight human subjects for multiple days in hypobaric and enriched oxygen atmospheres. The primary purpose of the testing capability is validation of DCS risk mitigation protocols for Artemis missions to the Moon; however, it will also support development and validation of a generalizable altitude DCS risk estimation tool. A 3-day and an 11-day prebreathe validation test were completed in 2022, each with 8 human subjects living at 56.5 kPa (8.2 psia), 34% O2, 66% N2, with 5 simulated EVAs performed on masks at 29.6 kPa (4.3 psi), 85% O2, 15% N2. Facility and organizational lessons-learned and process improvements were recorded during and following the tests, and subjective habitability ratings were recorded daily during the 11-day test. Hypoxia and DCS-related physiological and cognitive outcome measures were recorded during both tests and are reported in companion presentations. RESULTS & DISCUSSION: All subjects completed each of the tests. Primary habitability issues related to mask discomfort during simulated EVAs and poor sleep quality due to thin mattresses. Polybenzimidazole (PBI) clothing was worn by all subjects due to the increased fire risk and may be required for Artemis missions; clothing was found to be acceptable overall with the worst ratings being due to poor fit and inelasticity. Chamber O2 and CO2 sensor inconsistency was observed that did not result in test termination but required post-test follow-up. Forward plans include additional hypobaric testing and integration of existing and future physiological outcome data into an open-source Aerospace Estimation Tool for Hypobaric Exposure Risk (AETHER). NASA is also working to make the testing capability available to commercial companies.

Andrew Abercromby↗

NASA NTRSDate not supplied

CDC Bioreactor Configuration Method for Volume Level Control with Controlled Inlet and Outlet Flow

Environmental Control Life Support Systems and other microbiological biofilm studies often utilize small scale bioreactors. Among these options are the popular BioSurface CDC bioreactors, currently being utilized by Marshall Space Flight Center groups researching the impact of biofilms on life support systems. After a recent experimental regime, it was determined additional equipment could be added to augment the capabilities of the bioreactors. Previous research configurations such as ASTM E3161-21 relied on an outlet stream gravity draining from a side drain port located above sampling coupons. This limited applications to experimental conditions with a controlled inlet and uncontrolled outlet flow. With the introduction of a small single pole single throw (SPST) reed float switch and a peristaltic pump connected to the outlet drain and a chassis controller, the bioreactor is able to maintain a set level. The modification allows additional variables to be tested, including highly adjustable fill and flush cycles, bioreactor volume, draining and filling control. Once the configuration modifications were implemented through the installation of the new equipment, data was collected to ensure the stability of the level measurements. As the level control switch is a float switch, consideration was taken into account for effects of internal stirring speed, along with effects of inlet and outlet flow rate. Data presented in this study will illustrate the stability and effectiveness of the configuration changes in equipment made to the bioreactor. These configuration changes have demonstrated control method to conduct biofilm mitigation techniques for ECLSS hardware research. The controlled level capabilities allow for a constant drip feed flow rate into the bioreactors, a key aspect of the biofilm mitigation testing.

CDC Bioreactor↗

NASA NTRSDate not supplied

Enhancing Autonomous Satellite Communication Systems with Weather-Aware Scheduling and Reconfiguration

NASA currently provides communication support to over 100 satellite missions, and the agency is driving developments in Ka-band communications and network management automation to support additional future missions. At Ka-band frequencies, rain can degrade a communication link by more than 10 dB, which may be mitigated by agile scheduling and data rate control. We present a weather forecasting module for Ka-band communications that is intended to be used in an autonomous network management service that employs machine-to-machine scheduling systems for dynamic user access opportunities. Our forecasting module (NIMBUS) runs on AWS Cloud, consumes the freely and publicly available NOAA MRMS precipitation rate dataset (1km x 1km x 2-min), produces 30-minute Nowcasts using the pySTEPS algorithm, and publishes high level ground station specific link quality predictions. We evaluate two potential NIMBUS outputs, a binary classifier that predicts rain attenuation greater than 3 dB and a rain attenuation estimator, and we backtest these outputs using one year of power measurement data collected from observations of the geostationary ANIK F2 satellite’s Ka-band beacon. We report, with a 30-minute lead time, a binary classifier accuracy of 84% and an estimator RMSE of 1.67 dB. Additionally, we discuss how the NIMBUS module could be incorporated into a user-initiated service framework to enable weather-aware scheduling and reconfiguration. Operating a static link budget with minimal link margin can increase network operation costs by creating additional scheduling tasks due to failed packets, which may require human intervention and/or lead to inefficient asset utilization. The proposed system aims to increase throughput by reducing link margin, while mitigating increases in network operations costs by leveraging autonomous machine-to-machine scheduling, shortened prediction lead times, and advances in precipitation Nowcasting.

satellite communications↗

NASA NTRSDate not supplied

EMU CO2 Washout Comparative Assessments for the HAB/HAP-E in Support of EVA 80

After water was reported in the Extravehicular Mobility Unit (EMU) helmet during ISS US EVA 80, mitigation strategies were created to attempt to arrest the motion of any droplets that enter the helmet for future Extravehicular Activities (EVAs). This included adding absorbent materials into the interior of the helmet. But before a mitigation strategy can be implemented, it must first be proven to be safe. Towards this aim, a computational fluid dynamics (CFD) model was developed to assess the effect that the absorbent material has on the concentration of carbon dioxide in the EMU helmet. Within a small, closed volume such as a helmet, some amount of the carbon dioxide produced by the suit-wearer will be re-inhaled before being cleared from the oral-nasal region. The ability of the suit to remove carbon dioxide is referred to as CO2 washout. Pathological levels of inhaled CO2 (hypercapnia) are associated with dizziness, fatigue, and headaches. The CFD model was built in ANSYS Fluent and adapted to assess CO2 washout in a variety of scenarios grouped into three categories: ventilation cases, varying metabolic rates, and varying sorbent material configurations. The presence of the sorbent material did not prove detrimental to CO2 washout in the helmet.

Moses Navarro↗

NASA NTRS2023

Exploring the Complexities of Drug Formulation Selection, Storage, and Shelf-Life for Exploration Spaceflight

Medications have been a part of space travel dating back as far as the Apollo missions. Currently, medical kits aboard the ISS contain medications and supplies to help crew members cope with a variety of possible medical events. NASA reported that 1,867 medical events occurred from 1981 to 1998 on space shuttle flights, STS-1 to STS-89; 498 out of the 508 crewmembers on those flights reported experiencing a medical event other than space motion sickness. In 2000, the Institute of Medicine (IOM) convened a committee of experts, Committee on Creating a Vision for Space Medicine during Travel beyond Earth Orbit, to examine the issues surrounding astronaut health and safety for long duration space missions. The primary theme of the committee’s final report is that there is not enough known about the risks to human health during long-duration missions beyond Earth’s orbit and ways to effectively mitigate those risks in an environment of deep space. In 2014, the IOM convened the Committee on Ethics Principles and Guidelines for Health Standards for Long Duration and Exploration Spaceflights and released a report emphasizing the importance of prevention, mitigation, and treatment of major risks to human health during exploration spaceflight. NASA’s Human Research Program has organized five distinct categories of spaceflight hazards summarized by the acronym “RIDGE” (Space Radiation, Isolation and Confinement, Distance from Earth, Gravity fields, and Hostile/Closed Environments) that astronauts may encounter during exploration spaceflight. From those hazards, NASA further derived 30 of the most critical human health and performance risks, including limits to medical care resulting from pharmaceutical degradation. As we prepare for more distant exploration missions to Mars and beyond, risk management planning for astronaut healthcare should include the assembly of a medication formulary that is comprehensive enough to prevent or treat anticipated medical events, remains safe and chemically stable, and retains sufficient potency to last for the duration of the mission. The present editorial will summarize the current state of knowledge regarding innovative formulary optimization strategies, pharmaceutical stability assessment techniques, and storage and packaging solutions that could enhance drug safety and efficacy for future exploration spaceflight missions.

drug degradation risk assessment↗

NASA NTRSDate not supplied

Assessment of HAB Particulate Tracing in EMU Helmet in Support of Eva 80

Abigail Baukus↗

NASA NTRSDate not supplied

The ARADS Project as an Astrobiological Survey Mission Prototype

An astrobiological survey prior to human arrival will be important for preservation of signs of any existing or past evidence of Martian life, to reduce the risk of unintentional forward contamination of Martian environments in which terrestrial microbes might be able to gain a foothold (e.g., [1]), and to potentially protect the health of any human crews and enable their safe return to Earth. Evaluating for the presence of life and biosignatures may become a critical-path Mars exploration precursor in the not-so-far future, circa 2030-35. The near-subsurface, with its potential combination of volatiles, vapor exchange with the surface, and shelter from surface radiation, will be a primary initial target for in-situ astrobiological investigation. Sample acquisition, drilling and sample handling are key elements of robotic missions that target the subsurface [2], as well as near-surface ground ice deposits. In the mid 2000s, the Mars Astrobiology Field Laboratory (AFL) was proposed as a follow-on mission concept to the Mars Science Laboratory (MSL)/Curiosity rover mission [3]. The AFL would have included precision drilling to 2m, automated sample handling and remote processing of cores. However, the AFL concept needed further development and maturation. The Atacama Rover Astrobiology Drilling Studies (ARADS) project concept [4] was in part AFL-inspired. The 2014 ARADS concept included a medium sized rover, with habitability instruments, including the Phoenix Wet Chemistry Laboratory (WCL) [5], and an enhanced version of the ExoMars Mars Organic Molecule Analyzer (MOMA) Laser Desorption-Linear Ion Trap Mass Spectrometer (LITMS) [6]. ARADS likewise included two biosignature detection instruments -- the Signs of Life Detector (SOLID) immunoassay instrument [7,8] and the Chemical Laptop-derived [9] Planetary In-Situ Capillary Electrophoresis System (PISCES), while mitigating Planetary Protection-relevant contamination issues [10]. ARADS project objectives were to demonstrate the potential science return for such a mission in the context of the search for evidence of life, and technically to demonstrate the feasibility of roving with drilling missions to Mars. ARADS technology goals targeted analog-site demonstrations of automated drilling and sampling, integrated with its mobile habitability and biosignature detection instruments. And ARADS science operations goals developed remote science, contamination mitigation, and communications methods to enable simulating AFL-like science operations with time delays, directed by a remote science team[11]. Five subsequent Mars analog site field demonstrations (in Chile’s hyperarid Atacama Desert, 2016-19) provided a step-by-step development pathway for the ARADS platform’s science capabilities and systems integration, culminating in an integrated remote roving mission simulation in the final ARADS year (2019).

biosignatures↗

NASA NTRSDate not supplied

CDC Bioreactor Configuration Method for Volume Level Control with Controlled Inlet and Outlet Flow

CDC Bioreactor↗

NASA NTRS2023

IMPACTing Medical System Design with a Risk Analysis Tool [“IMPACT” sur la Conception du Système Médical avec un Outil d'Analyse des Risques]

Background: Following the success of Artemis I, NASA is preparing for human extended duration missions. Ongoing efforts are focused on mitigating mission-related risks, including those affecting crew health and performance. Communication latency, logistics of resupply and time frame of medical evacuation are barriers to provision of healthcare for these missions, especially with respect to constraints in mass, volume, and crew training. An in-depth assessment of medical risks, capabilities and resources for a specific mission design is necessary to determine an optimal balance that maximizes likelihood of mission success. Overview: IMPACT (Informed Mission Planning via Analysis of Complex Tradespaces) is a dynamic tool designed to estimate medical risk and outcomes for a specific mission design. In its current iteration, a list of medical conditions selected based on likelihood of occurrence and/or consequence was linked to a set of clinical capabilities and resources necessary for diagnosis and management. A probabilistic risk analysis tool was then used to identify and estimate the likelihood and consequence of risks through the following outcome metrics: loss of crew life (inflight mortality due to medical conditions), need for medical evacuation (return to definitive care), and crew disability (task time affected based on how medical conditions influence the ability to perform specific exploration mission crew tasks). Finally, the model’s optimization algorithm provides recommendations for medical capabilities that maximize risk mitigation relative to mass and volume constraints. In the Spring of 2023, IMPACT was utilized to estimate outcome metrics for a design reference mission that would be representative of an extended duration Artemis mission. Notional data generated were then used to determine a recommended set of medical capabilities and resources relative to user-defined mass and volume constraints. A multidisciplinary team has also been updating IMPACT to strengthen the model’s fidelity. Figure 1 shows how updates to outcome metric inputs for the conditions resulted in different capability and resource allocation recommendations. Discussion: This presentation will discuss the IMPACT tool and share the latest data generated for a representative extended duration Artemis mission. Efforts to improve the fidelity of data generated by the model’s algorithm will also be discussed.

K A Shair↗

NASA NTRSDate not supplied

Modeling Distributed Situation Awareness in Resilience-based Design of Complex Systems

Human operators play a major role in the resilience of complex systems–while human error is one of the biggest contributors to hazardous events, operators additionally play a critical role in mitigating hazardous events. A key factor underlying this operator resilience is situation awareness–the ability of operators to understand their environment and each other to achieve desired system functions. In contrast to situation awareness-related accident models in the literature, which are largely conceptual in nature, this work proposes the use of a dynamic simulation framework to concretely model both the effects of situation awareness-related human errors and situation awareness-related hazard-mitigating properties using the distributed situation awareness theory. This work then presents specialized model constructs to enable agents’ individual perceptions of the system state and transactions with other agents (and thus distributed situation awareness) to be represented in simulation. To demonstrate this framework, it is then adapted to an aircraft taxiway case study, where it is used to model aircraft conflicts due to lack of vision and poor communications from the air traffic controller. This demonstration shows the potential of using simulation models to rigorously understand situation awareness-related human errors and thus inform the design of resilience.

Resilience Modeling↗