Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Revisiting radiative deep-level transitions in CuGaSe{sub 2} by photoluminescence

Recent defect calculations suggest that the open circuit voltage of CuGaSe{sub 2} solar cells can be limited by deep intrinsic electron traps by Ga{sub Cu} antisites and their complexes with Cu-vacancies. To gain experimental evidence, two radiative defect transitions at 1.10 eV and 1.24 eV are characterized by steady-state photoluminescence on epitaxial-grown CuGaSe{sub 2} thin films. Cu-rich samples are studied, since they show highest crystal quality, exciton luminescence, and no potential fluctuations. Variations of the laser intensity and temperature dependent measurements suggest that emission occurs from two deep donor-like levels into the same shallow acceptor. At 10 K, power-law exponents of 1 (low excitation regime) and 1/2 (high excitation regime) are observed identically for both transitions. The theory and a fitting function for the double power law is derived. It is concluded that the acceptor becomes saturated by excess carriers which changes the exponent of all transitions. Activation energies determined from the temperature quenching depend on the excitation level and show unexpected values of 600 meV and higher. The thermal activation of non-radiative processes can explain the distortion of the ionization energies. Both the deep levels play a major role as radiative and non-radiative recombination centers for electrons and can be detrimental for photovoltaic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laboratory report on iodine ( 129 I and 127 I) speciation, transformation and mobility in Handford groundwater, suspended particles and sediments

The Hanford Site in eastern Washington produced plutonium for several decades and in the process generated billions of gallons of radioactive waste. Included in this complex mixture of waste was 50 Ci of iodine-129 ( 129 I). Iodine-129’s high abundance, due to its high fission yield, and extreme toxicity result in iodine-129 becoming a key risk driver at many Department of Energy (DOE) sites. The mobility of radioiodine in arid environments, such as the Hanford Site, depends largely on its chemical speciation and is also greatly affected by many other environmental factors, especially natural sediment organic matter (SOM). Groundwater radioiodine speciation has not been measured in arid regions with major plumes or large disposed 129 I inventories, including the Hanford Site, Idaho National Laboratory, and Nevada Test Site. In this study, stable iodine-127 and radioiodine-129 speciation, pH, and dissolved organic carbon (DOC) of groundwater samples collected from seven wells located in the 200-West Area of the Hanford site were investigated. The most striking finding was that iodate (IO 3 - ) was the most abundant species. Unexpectedly, iodide (I - ), which was likely the form of iodine in the source materials and the expected dominant groundwater species based on thermodynamic considerations, only accounted for 1-2% of the total iodine concentration. It is likely that the relatively high pH and the low abundance of sedimentary organic matter (SOM) that is present at the site slowed down or even inhibited the reduction of iodate, as SOM abiotically reduce iodate into iodide. Moreover, a study on the kinetics of iodide and iodate uptake and aqueous speciation transformation by three representative subsurface Hanford sediments was performed over a period of about one month. This study was carried out by using iodide-125 or iodate-125 at the ambient iodine-127concentration found at the site. Iodate K d values were on average 89% greater than iodide K d values, and the K d values for both species tended to increase with the amount of organic carbon (OC) present in the sediment. It is especially noteworthy that this trend existed at the very low OC concentrations that naturally exist in the Hanford sediments. Iodine and OC can form essentially irreversible covalent bonds, thereby providing a yet unstudied 129 I retardation reaction at the Hanford Site. In addition to the transformation of iodine species, the sediment collected from the vadose zone also released stable iodide into the aqueous phase. It was found that the three sediments all took up the ambient iodate from the groundwater and slowly transformed it into iodide under the laboratory conditions, likely dependent on the abundance of reducing agents such as organic matter and Fe 2+ . Therefore two competitive iodine processes were identified, the tendency for the sediment to reduce iodate to iodide, and the groundwater chemistry to maintain the iodine as iodate, presumably it is largely the result of natural pH and dissolved O 2 /Eh levels. Suspended carbonate (and silica) particles collected from Hanford groundwater contained elevated amounts of iodine (142 ± 8 μg/g iodine), consisting mainly of iodate (>99%). Iodate was likely incorporated into the carbonate structure during calcite precipitation upon degasing of CO 2 as the groundwater samples were removed from the subsurface. This concentration of groundwater iodate in precipitated carbonate has implication to long-term fate and transport of 129 I and on active in-situ 129 I groundwater remediation. This study provides some of the first groundwater radioiodine speciation studies conducted in arid environments and provides much needed mechanistic descriptions to permit making informed decisions about low-cost/high intellectual input remediation options, such as monitored natural attenuation, or long-term stewardship of nuclear waste disposal sites.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Rotational excitation of H2 in collision with H

Rate coefficients for the reactive processes of ortho-para conversion in which the j = 0 rotational level of molecular hydrogen is excited to the j = 1 and j = 3 level by impacts with hydrogen atoms are calculated for temperatures between 30 K and 1000 K using a fully converged complete close-coupled method. Rate coefficients are also obtained for the excitation from the j = 0 to the j = 2 rotational level and from the j = 1 to the j = 3 rotational level. The interference between the direct and reactive channels is taken into account as is the geometric phase resulting from the adiabatic separation of electronic and nuclear motion that generates the potential energy surface. Convenient analytic representations of the rate coefficients are presented.

Sun, Y.↗

High-Quality Factor Microwave Resonators using Rhenium

Coplanar waveguide resonators are a perfect tool to evaluate the losses induced by defects and interfaces in superconducting devices. Even if niobium is the most used superconductor for resonators and qubits, its native oxide at the metal-air (MA) interface limits the device results. Tantalum has recently significantly improved qubit performances due to a thinner and less disordered oxide layer compared to Nb. To further improve the MA interface, we used rhenium, a superconducting material with 1.7 K critical temperature resistant to oxidation: it forms an oxide layer thinner than 1 nm. In this study, we will present a thorough investigation of rhenium CPW resonator measurements with internal quality factors at the single photon level exceeding 2 million. The devices have been fabricated on a sapphire substrate while the processing parameters have been varying and optimized. The measurements have been performed as a function of power and temperature to disentangle different sources of losses, such as two-level systems (TLS) and quasi-particles. A peculiar TLS temperature dependence has been measured and analyzed. In this work, we also vary the participation ratio of the devices to extract the losses introduced by the involved interfaces with higher fidelity and precision. We carried on a deep material characterization effort to link the results to the differences in the fabrication steps, and we will present material characterization measurements performed via AFM, ToF-SIMS, XPS, and TEM.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TRMM Precipitation Radar and Microwave Imager Observations of Convective and Stratiform Rain and Their Theoretical Implications

Theoretical models of radiative transfer are developed to simulate the 85 GHz brightness temperature, T85, observed by the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) radiometer as a function of rain rate. These simulations are performed separately over regions of convective and stratiform rain. For the purpose of constructing vertical profiles of hydrometeors in these regions, guidance is taken from TRMM Precipitation Radar (PR) observations, and from recent investigations of LDR and Z(sub DR) measurements made by land-based polarimetric radars. We find that for a given rain rate, the extinction in 85 GHz due to hydrometeors above the freezing level is relatively weak in convective regions compared to that in stratiform regions. The hydrometeor profile above the freezing level responsible for this weak extinction in convective regions is inferred, from LDR and Z(sub DR) observations and theoretical considerations, to contain two layers: 1) a layer of two km thickness with mixed phase particles, liquid drops and graupel, directly above the freezing level, and 2) a layer of graupel extending from the top of the mixed-phase layer to the cloud top. Strong extinction in the stratiform regions is inferred to result from slowly-falling, low-density ice aggregates (snow) above the freezing level. These theoretical results are consistent with T85 measured by TMI and the rain rate deduced from PR for convective and stratiform rain regions. On the basis of this study we infer that the accuracy of the rain rate sensed by TMI depends critically on the specification of the convective or stratiform nature of the rain.

Prabhakara, C.↗

Profile Evolution Simulation in Etching Systems Using Level Set Methods

Semiconductor device profiles are determined by the characteristics of both etching and deposition processes. In particular, a highly anisotropic etch is required to achieve vertical sidewalls. However, etching is comprised of both anisotropic and isotropic components, due to ion and neutral fluxes, respectively. In Ar/Cl2 plasmas, for example, neutral chlorine reacts with the Si surfaces to form silicon chlorides. These compounds are then removed by the impinging ion fluxes. Hence the directionality of the ions (and thus the ion angular distribution function, or IAD), as well as the relative fluxes of neutrals and ions determines the amount of undercutting. One method of modeling device profile evolution is to simulate the moving solid-gas interface between the semiconductor and the plasma as a string of nodes. The velocity of each node is calculated and then the nodes are advanced accordingly. Although this technique appears to be relatively straightforward, extensive looping schemes are required at the profile corners. An alternate method is to use level set theory, which involves embedding the location of the interface in a field variable. The normal speed is calculated at each mesh point, and the field variable is updated. The profile comers are more accurately modeled as the need for looping algorithms is eliminated. The model we have developed is a 2-D Level Set Profile Evolution Simulation (LSPES). The LSPES calculates etch rates of a substrate in low pressure plasmas due to the incident ion and neutral fluxes. For a Si substrate in an Ar/C12 gas mixture, for example, the predictions of the LSPES are identical to those from a string evolution model for high neutral fluxes and two different ion angular distributions.(2) In the figure shown, the relative neutral to ion flux in the bulk plasma is 100 to 1. For a moderately isotropic ion angular distribution function as shown in the cases in the left hand column, both the LSPES (top row) and rude's string method (bottom row) predict tapered profiles. The LSPES uses an AD with a FWHM = 13.5 degrees, and rude's model uses a ratio of sheath voltage to ion temperature of 50. The more anisotropic IADs produce profiles with more vertical sidewalls and a wider bottom surface, as shown in the right hand column. Here, the LSPES has an AD with a FWHM = 2 degrees, and rude's model uses a ratio of 500 of sheath voltage to ion temperature. The agreement between the LSPES and rude's model is excellent in both cases. We will present etching profiles generated by the LSPES, including calculations of the re-emitted fluxes of both neutrals and ions off of the profile walls. In addition, we will show the effect of geometric structures (overhangs, etc.) on the etching profiles. Other physical aspects, such as surface diffusion, will also be included in the model.

Hwang, Helen H.↗

Dosimetric Implications of an Injection of Hyaluronic Acid for Preserving the Rectal Wall in Prostate Stereotactic Body Radiation Therapy

Purpose: This study assessed the contribution of ahyaluronic acid (HA) injection between the rectum and the prostate to reducing the dose to the rectal wall in stereotactic body radiation therapy (SBRT). Methods and Materials: As part of a phase 2 study of hypofractionated radiation therapy (62 Gy in 20 fractions), the patients received a transperineal injection of 10 cc HA between the rectum and the prostate. A dosimetric computed tomographic (CT) scan was systematically performed before (CT1) and after (CT2) the injection. Two 9-beam intensity modulated radiation therapy-SBRT plans were optimized for the first 10 patients on both CTs according to 2 dosage levels: 5 × 6.5 Gy (PlanA) and 5 × 8.5 Gy (PlanB). Rectal wall parameters were compared with a dose–volume histogram, and the prostate–rectum separation was measured at 7 levels of the prostate on the center line of the organ. Results: For both plans, the average volume of the rectal wall receiving the 90% isodose line (V90%) was reduced up to 90% after injection. There was no significant difference (P=.32) between doses received by the rectal wall on CT1 and CT2 at the base of the prostate. This variation became significant from the median plane to the apex of the prostate (P=.002). No significant differences were found between PlanA without HA and PlanB with HA for each level of the prostate (P=.77, at the isocenter of the prostate). Conclusions: HA injection significantly reduced the dose to the rectal wall and allowed a dose escalation from 6.5 Gy to 8.5 Gy without increasing the dose to the rectum. A phase 2 study is under way in our department to assess the rate of acute and late rectal toxicities when SBRT (5 × 8.5 Gy) is combined with an injection of HA.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Effects of duration and other noise characteristics on the annoyance caused by aircraft-flyover noise

A laboratory experiment was conducted to determine the effects of duration and other noise characteristics on the annoyance caused by aircraft-flyover noise. Duration, doppler shift, and spectra were individually controlled by specifying aircraft operational factors, such as velocity, altitude, and spectrum, in a computer synthesis of the aircraft-noise stimuli. This control allowed the separation of the effects of duration from the other main factors in the experimental design: velocity, tonal content, and sound pressure level. The annoyance of a set of noise stimuli which were comprised of factorial combinations of a 3 durations, 3 velocities, 3 sound pressure levels, and 2 tone conditions were judged. The judgements were made by using a graphical scale procedure similar to numerical category scaling. Each of the main factors except velocity was found to affect the judged annoyance significantly. The interaction of tonal content with sound pressure level was also found to be significant. The duration correction used in the effective-perceived-noise-level procedure, 3 dB per doubling of effective duration, was found to account most accurately for the effect of duration. No significant effect doppler shift was found.

Mccurdy, D. A.↗

DESI and DECaLS (D&D): galaxy–galaxy lensing measurements with 1 per cent survey and its forecast

The shear measurement from the Dark Energy Camera Legacy Survey (DECaLS) provides an excellent opportunity for galaxy–galaxy lensing study with the Dark Energy Spectroscopic Instrument (DESI) galaxies, given the large (~9000 deg 2 ) sky overlap. We explore this potential by combining the DESI 1 per cent survey and DECaLS Data Release 8 (DR8). With ~106 deg 2 sky overlap, we achieve significant detection of galaxy–galaxy lensing for Bright Galaxy Survey (BGS) and luminous red galaxy (LRG) as lenses. Scaled to the full BGS sample, we expect the statistical errors to improve from 18(12)per cent to a promising level of 2(1.3)per cent at θ > 8arcmin(< 8 arcmin) ⁠. This brings stronger requirements for future systematics control. To fully realize such potential, we need to control the residual multiplicative shear bias |m| < 0.006 and the bias in the mean redshift |Δz| < 0.008, requiring the introduced bias in the measurement is <0.31σ. We also expect significant detection of galaxy–galaxy lensing with DESI LRG/emission line galaxy (ELG) full samples as lenses, and cosmic magnification of ELG through cross-correlation with low-redshift DECaLS shear. If such systematical error control can be achieved, we find the advantages of DECaLS, comparing with the Kilo Degree Survey (KiDS) and the Hyper Suprime-Cam (HSC), are at low redshift, large scale, and in measuring the shear ratio (to σ R ~ 0.04) and cosmic magnification.

(cosmology:) large-scale structure of Universe↗

Measuring and unbiasing the BAO shift in the Ly α forest with AbacusSummit

ABSTRACT The Dark Energy Spectroscopic Instrument (DESI) places sub- per cent constraints on measurements of the Baryon Acoustic Oscillation (BAO) scaling parameters from the Ly $\alpha$ forest. However, no systematic error budget stemming from non-linearities in the three-dimensional clustering of the Ly $\alpha$ forest is included in the DESI-Ly $\alpha$ analysis. In this work, we measure the size of the shift of the BAO peak using large Ly $\alpha$ forest mocks produced on the N-body simulation suite AbacusSummit, which adopt the Fluctuating–Gunn–Peterson Approximation (FGPA). Specifically, we measure the Ly $\alpha$ autocorrelation and the Ly $\alpha$-quasar cross-correlation functions. To mitigate the noise, we adopt a linear control variates technique, reducing the error bars by a factor of up to $\sim \sqrt{50}$ on large scales. From the autocorrelation, we detect a small positive shift in radial direction of $\Delta \alpha _{\parallel }= 0.35~{{\ \rm per\ cent}}$ at the 3$\sigma$ level and virtually no shift in the transverse direction, $\alpha _\perp$. From the cross-correlation, we see a similar shift to $\Delta \alpha _\parallel$, albeit with larger error bars, and a small negative shift, $\Delta \alpha _{\perp }=\sim$0.25 per cent, at the 2$\sigma$ level. We also make a connection with the Ly $\alpha$ forest effective field theory (EFT) framework and find that the one-loop EFT power spectrum yields unbiased measurements of the BAO shift parameters in radial and transverse direction for Ly $\alpha$ auto- and the Ly $\alpha$-quasar cross-correlation measurements. When using the one-loop EFT framework, we find that we can recover the BAO parameters without a shift, which has important implications for future Ly $\alpha$ forest analyses based on EFT. This work paves the way for novel full-shape analyses of the currently observing DESI and future surveys such as the PFS, WEAVE-QSO, and 4MOST.

Hadzhiyska, Boryana↗

Global Ethanol-Blended-Fuel Vehicle Compatibility Study

The objective of this study is to understand the impact of ethanol-blended fuel at various blending levels (10%, 15%, and 20% vol.) on "in-operation" vehicles built to differing emissions and manufacturing standards around the world. The study focuses on vehicles used in Canada, China, India, Indonesia, Japan, South Korea, and Mexico. Historical experience in the United States and Brazil informs the analysis. The primary study question is: Are vehicles in targeted countries physically and operationally compatible with ethanol blended fuel? For a fuel to be compatible with a vehicle, the fuel must perform its function as part of the integrated fuel-vehicle system, meaning: the car should start easily and drive normally, the fuel should not cause catastrophic fuel system leaks, the fuel should not cause corrosion or degradation of any engine or fuel system components (including emissions control components). The history of E10 use in the United States, beginning in 1978, was evaluated and shows no reliability or operability issues for cars dating back to pre-emissions-control times -- and likely included many cars manufactured in the 1960s. This strongly supports the contention that fuel chemistry and property differences between E0 and E10 are so small that any car made to international standards in the last 50 years will have a very high probability of being fully compatible with E10. This conclusion is supported by the experience in Brazil in the 1970s, where E10 was also introduced, and ethanol blending for conventional cars rapidly ramped up to even higher blend levels. A limited number of fuel system and component manufacturers supply the global market, including Bosch, Continental, Denso, Delphi, and Visteon. To reduce complexity, ethanol-compatible materials began to be integrated in fuel system designs globally. Fuel systems evolved over the following decades to incorporate ethanol-compatible materials with core subsystem families, such as in-tank fuel pumps used across several global vehicle original equipment manufacturers (OEMs). A similarly compelling case can be made that all cars at the Tier 1 (or equivalent) emissions-control technology level or higher are fully compatible with E15 blends, based on the data evaluated by the U.S. Environmental Protection Agency (EPA) and Ricardo in 2010. For cars at this technology level, the minor differences in fuel chemistry and properties between E10 and E15 are not significant. For E20, studies are not as extensive but are still highly significant. A long-term durability study conducted on mileage accumulation dynamometers presents convincing evidence that Tier 2 technology level cars have materials of construction and engine control authority for compatibility with E20, although this conclusion is not as strong as those drawn for E10 and E15, which are also partly based on real-world experience.

09 BIOMASS FUELS↗

A Cartesian Adaptive Level Set Method for Two-Phase Flows

In the present contribution we develop a level set method based on local anisotropic Cartesian adaptation as described in Ham et al. (2002). Such an approach should allow for the smallest possible Cartesian grid capable of resolving a given flow. The remainder of the paper is organized as follows. In section 2 the level set formulation for free surface calculations is presented and its strengths and weaknesses relative to the other free surface methods reviewed. In section 3 the collocated numerical method is described. In section 4 the method is validated by solving the 2D and 3D drop oscilation problem. In section 5 we present some results from more complex cases including the 3D drop breakup in an impulsively accelerated free stream, and the 3D immiscible Rayleigh-Taylor instability. Conclusions are given in section 6.

Ham, F.↗

Thermoluminescence and optically stimulated luminescence response of Al 2 O 3 coatings deposited by mist-chemical vapor deposition

Aluminum oxide (Al 2 O 3 ) is a widely used ceramic material which can be applied as a protective coating on metallic structures to improve corrosion resistance and mechanical properties. Al 2 O 3 also has great potential as a functional thin film device in optoelectronics. When it is doped with carbon (Al 2 O 3 :C), this material system can serve as a reliable radiation dosimeter. The combination of optoelectronic, dosimetric, and protective properties demonstrated by Al 2 O 3 uniquely positions it for dual use applications in nuclear forensics, nonproliferation and safeguards, emergency response, retrospective dosimetry, and nondestructive inspection. Here, in this study, an innovative ultrasonic mist-chemical vapor deposition (Mist-CVD) system was used to deposit thin (nm level) Al 2 O 3 coatings on 304 stainless steel substrates. The single aliquot regeneration (SAR) and additive dose reconstruction techniques were then used to investigate the thermoluminescence (TL) and optically stimulated luminescence (OSL) response of the coated substrates to increasing doses of β irradiation. This study demonstrates that nm-thick Al 2 O 3 coatings hold promise as novel nano-dosimeters which could be leveraged for a series of applications such as nonproliferation and safeguards, retrospective dosimetry, and nondestructive inspection.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Time-Dependent Photodissociation Regions

We present theoretical models of the time-dependent thermal and chemical structure of molecular gas suddenly exposed to far-ultraviolet (FUV) (6 eV less than hv less than 13.6 eV) radiation fields and the consequent time- dependent infrared emission of the gas. We focus on the response of molecular hydrogen for cloud densities ranging from n = 10(exp 3) to 10(exp 6)/cu cm and FUV fluxes G(sub 0) = 10(exp 3)-10(exp 6) times the local FUV interstellar flux. For G(sub 0)/n greater than 10(exp -2) cu cm, the emergent H(sub 2) vibrational line intensities are initially larger than the final equilibrium values. The H(sub 2) lines are excited by FUV fluorescence and by collisional excitation in warm gas. Most of the H(sub 2) intensity is generated at a characteristic hydrogen column density of N approximately 10(exp 21)/sq cm, which corresponds to an FUV optical depth of unity caused by dust opacity. The time dependence of the H(sub 2) intensities arises because the initial abundances of H(sub 2) at these depths is much higher than the equilibrium values, so that H(sub 2) initially competes more effectively with dust in absorbing FUV photons. Considerable column densities of warm (T approximately 1000) K H(sub 2) gas can be produced by the FUV pumping of H(sub 2) vibrational levels followed by collisional de-excitation, which transfers the energy to heat. In dense (n greater than or approximately 10(exp 5)/cu cm) gas exposed to high (G(sub 0) greater than or approximately 10(exp 4)) fluxes, this warm gas produces a 2-1 S(1)/1-0 S(l) H(sub 2) line ratio of approximately 0.1, which mimics the ratio found in shocked gas. In lower density regions, the FUV pumping produces a pure-fluorescent ratio of approximately 0.5. We also present calculations of the time dependence of the atomic hydrogen column densities and of the intensities of 0 I 6300 A, S II 6730 A, Fe II 1.64 microns, and rotational OH and H20 emission. Potential applications include star-forming regions, clouds near active galactic nuclei, and planetary nebulae. We apply our models to five planetary nebulae and conclude that only BD +30deg3639 shows evidence of enhanced H(sub 2) emission due to (high) nonequilibrium H(sub 2) abundances.

Hollenbach, David↗

Phototoxicity of nano titanium dioxides in HaCaT keratinocytes—Generation of reactive oxygen species and cell damage

Nano-sized titanium dioxide (TiO{sub 2}) is among the top five widely used nanomaterials for various applications. In this study, we determine the phototoxicity of TiO{sub 2} nanoparticles (nano-TiO{sub 2}) with different molecular sizes and crystal forms (anatase and rutile) in human skin keratinocytes under UVA irradiation. Our results show that all nano-TiO{sub 2} particles caused phototoxicity, as determined by the MTS assay and by cell membrane damage measured by the lactate dehydrogenase (LDH) assay, both of which were UVA dose- and nano-TiO{sub 2} dose-dependent. The smaller the particle size of the nano-TiO{sub 2} the higher the cell damage. The rutile form of nano-TiO{sub 2} showed less phototoxicity than anatase nano-TiO{sub 2}. The level of photocytotoxicity and cell membrane damage is mainly dependent on the level of reactive oxygen species (ROS) production. Using polyunsaturated lipids in plasma membranes and human serum albumin as model targets, and employing electron spin resonance (ESR) oximetry and immuno-spin trapping as unique probing methods, we demonstrated that UVA irradiation of nano-TiO{sub 2} can induce significant cell damage, mediated by lipid and protein peroxidation. These overall results suggest that nano-TiO{sub 2} is phototoxic to human skin keratinocytes, and that this phototoxicity is mediated by ROS generated during UVA irradiation. Highlights: ► We evaluate the phototoxicity of nano-TiO{sub 2} with different sizes and crystal forms. ► The smaller the particle size of the nano-TiO{sub 2} the higher the cell damage. ► The rutile form of nano-TiO{sub 2} showed less phototoxicity than anatase nano-TiO{sub 2}. ► ESR oximetry and immuno-spin trapping techniques confirm UVA-induced cell damage. ► Phototoxicity is mediated by ROS generated during UVA irradiation of nano-TiO{sub 2}.

60 APPLIED LIFE SCIENCES↗

Crustal dynamics project session 4 validation and intercomparison experiments 1979-1980 report

As part of the Crustal Dynamics Project, an experiment was performed to verify the ability of Satellite Laser Ranging (SLR), Very Long Baseline interferometry (VLBI) and Doppler Satellite Positioning System (Doppler) techniques to estimate the baseline distances between several locations. The Goddard Space Flight Center (GSFC) lasers were in operation at all five sites available to them. The ten baselines involved were analyzed using monthly orbits and various methods of selecting data. The standard deviation of the monthly SLR baseline lengths was at the 7 cm level. The GSFC VLBI (Mark III) data was obtained during three separate experiments. November 1979 at Haystack and Owens Valley, and April and July 1980 at Haystack, Owens Valley, and Fort Davis. Repeatability of the VLBI in determining baseline lengths was calculated to be at the 2 cm level. Jet Propulsion Laboratory (JPL) VLBI (Mark II) data was acquired on the Owens Valley to Goldstone baseline on ten occasions between August 1979 and November 1980. The repeatability of these baseline length determinations was calculated to be at the 5 cm level. National Geodetic Survey (NGS) Doppler data was acquired at all five sites in January 1980. Repeatability of the Doppler determined baseline lengths results were calculated at approximately 30 cm. An intercomparison between baseline distances and associated parameters was made utilizing SLR, VLBI, and Doppler results on all available baselines. The VLBI and SLR length determinations were compared on four baselines with a resultant mean difference of -1 cm and a maximum difference of 12 cm. The SLR and Doppler length determinations were compared on ten baselines with a resultant mean difference of about 30 cm and a maximum difference of about 60 cm. The VLBI and Doppler lengths from seven baselines showed a resultant mean difference of about 30 cm and maximum difference of about 1 meter. The intercomparison of baseline orientation parameters were consistent with past analysis.

Liebrecht, P.↗

Excited state dynamics of thulium ions in yttrium aluminum garnets

The processes that take place in the excited states of a trivalent Thulium (Tm) ion in an Yttrium Aluminum Garnet (YAG) crystal, being relevant to the use of this system for laser applications, have been the object of several studies. We have reexamined this system focusing our attention on the dynamics of Tm following its excitation in the H-3(sub 4) level. Under these conditions the system relaxes through a cross-relaxation process. H-3(sub 4) yields F-3(sub 4), H-3(sub 6) yields F-3(sub 4), whose rate depends upon both the concentration of the Tm ion and the temperature of the crystal. The excitation spectrum obtained by monitoring the 1.8 micron emission of Tm (due to the F-3(sub 4) yields H-3(sub 6) transition) indicates an increase in the contribution to this emission from the H-3(sub 4) level relative to the H-3(sub 5) level as the Tm concentration increases; this shows the increased role played by the H-3(sub 4) level in pumping the infrared emission. Correspondingly, the duration of the luminescence originating in the H-3(sub 4) level is shortened as the concentration of Tm increases. The concentration quenching of this lifetime can be fit to a model which assumes that the cross-relaxation is due to a dipole-dipole interaction; from this fit, the intrinsic Tm lifetime in the absence of cross relaxation can be derived. We have used this lifetime to calculate the rate of the cross-relaxation process. We have evaluated this rate as a function of the temperature and found it to be fastest at 77 K. We have also calculated the microscopic interaction parameters for the cross-relaxation process by using two independent experimental features: (1) the time evolution of the emission from the H-3(sub 4) level; and (2) the spectral overlap between the H-3(sub 4) yields F-3(sub 4) emission and the H-3(sub 6) yields F-3(sub 4) absorption. We have also considered the migration of excitation among the Tm ions in the F-3(sub 4) level and calculated the relevant microparameter by the use of the relevant spectral overlap. The data are consistent with the model in which the Tm ions, once excited into the H-3(sub 4) level decay by cross-relaxation to the F-3(sub 4), and then transfer rapidly their energy to other Tm ions.

Armagan, G.↗

Small Aperture Telescopes for the Simons Observatory

The Simons Observatory (SO) is an upcoming cosmic microwave background(CMB) experiment located on Cerro Toco, Chile, that will map the microwave sky in temperature and polarization in six frequency bands spanning 27 to 285 GHz. SO will consist of one 6-meter Large Aperture Telescope (LAT) fielding∼30,000 detectors and an array of three 0.42-meter Small Aperture Telescopes (SATs) fielding an additional 30,000 detectors. This synergy will allow for the extremely sensitive characterization of the CMB over an-gular scales ranging from an arcmin to tens of degrees, enabling a wide range of scientific output. Here we focus on the SATs targeting degree angular scales with successive dichroic instruments observing at Mid-Frequency (MF: 93/145 GHz), Ultra-High-Frequency (UHF:225/285 GHz), and Low-Frequency (LF: 27/39 GHz). The three SATs will be able to map∼10% of the sky to a noise level of∼2 μK-arcmin when combining 93 and 145 GHz. The multiple frequency bands will allow the CMB to be separated from galactic foregrounds (primarily synchrotron and dust), with the primary science goal of characterizing the primordial tensor-to-scalar ratio, r, at a target level ofσ(r)≈0.003.

Small aperature telescope↗