Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LOS ALAMOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

SCALE modeling of foil irradiations at WSU’s TRIGA with sensitivity/uncertainty analysis

We report the Washington State University TRIGA reactor was modeled in the SCALE system’s KENO neutron transport code. The model includes 119 fuel rods, a central boral control rod, 4 control blades, 5 irradiation ports, and 20 graphite reflector blocks within a rectangular aluminum grid box. The model accurately simulated the irradiation of depleted uranium and highly enriched uranium foils and predicted reaction rate ratios for 238 U(n,2n) 237 U / 238 U(n,γ) 239 U and 99 Mo / fission, which compared favorably to empirical values previously measured at Los Alamos. Finally, a sensitivity/uncertainty analysis was performed using the continuous-energy TSUNAMI-3D module of SCALE.

237Np↗

Results from a controlled depleted uranium metal casting experiment designed to investigate nuclear Forensic Radiochronometry Signatures

The accurate interpretation of uranium metal 230 Th/ 234 U and 231 Pa/ 235 U radiochronometry model ages requires an understanding of how uranium parent nuclides and decay progeny ( 230 Th and 231 Pa) behave during uranium metal casting. In order to directly measure the spatial distribution of 230 Th and 231 Pa in uranium metal before and after vacuum induction melting (VIM), Los Alamos National Laboratory identified uranium metal feedstock, characterized the metal feedstock, conducted a controlled casting experiment of an approximately 120 kg uranium metal rod, and characterized the cast metal. Herein this study presents radiochronometry results and quantified 230 Th and 231 Pa VIM separation factors from bulk uranium.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

A Planar Biaxial Experiment Platform for In Situ High-Energy Diffraction Studies

In this work, an experimental platform for multiscale studies of materials subjected to plane stress loads is presented. Specifically, a planar biaxial mechanical load frame with four independent hydraulic actuators capable of applying arbitrary loading paths and ratios of tension and compression was designed and built for in situ diffraction experimentation. The load frame is integrated for use at the Argonne National Laboratory Advanced Photon Source (APS) synchrotron, Sector 1, 1-ID-E endstation and the Los Alamos Neutron Science Center (LANSCE) spallation neutron source, Spectrometer for Materials Research at Temperature and Stress (SMARTS) instrument. Cruciform specimen geometries were designed to experience loading ratios in the gauges commensurate with those applied at the grips, and to minimize interference with diffracted X-rays and neutrons. The finite element models used to design the cruciform specimen geometries were experimentally validated using stereo digital image correlation measurements. This complete planar biaxial in situ diffraction platform provides a new capability for studying multiaxial micromechanics of crystalline materials (e.g., elastic, slip, twinning, phase transformation) and their dependencies on grain size, location, texture, and neighborhood characteristics. The coupling with far-field high energy diffraction microscopy (ff-HEDM) for grain-by-grain measurements provides an additional benefit; provided crystal elastic constants of a material are known, it enables the direct measurement of local and average stress tensors in the gauge sections of cruciform specimens, resolving a long outstanding challenge of planar biaxial mechanical testing.

36 MATERIALS SCIENCE↗

HOSS: an implementation of the combined finite-discrete element method

Nearly thirty years since its inception, the combined finite-discrete element method (FDEM) has made remarkable strides in becoming a mainstream analysis tool within the field of Computational Mechanics. FDEM was developed to effectively “bridge the gap” between two disparate Computational Mechanics approaches known as the finite and discrete element meth-ods. At Los Alamos National Laboratory (LANL) researchers developed the Hybrid Optimization Software Suite (HOSS) as a hybrid multi-physics platform, based on FDEM, for the simulation of solid material behavior complemented with the latest technological enhancements for full fluid–solid interaction. Furthermore, in HOSS, several newly developed FDEM algorithms have been implemented that yield more accurate material deformation formulations, inter-particle interaction solvers, and fracture and fragmentation solutions. Additionally, an explicit computational fluid dynamics solver and a novel fluid–solid interaction algorithms have been fully integrated (as opposed to coupled) into the HOSS’ solid mechanical solver, allowing for the study of an even wider range of problems. Advancements such as this are leading HOSS to become a tool of choice for multi-physics problems. Finally, HOSS has been successfully applied by a myriad of researchers for analysis in rock mechanics, oil and gas industries, engineering application (structural, mechanical and biomedical engineering), mining, blast loading, high velocity impact, as well as seismic and acoustic analysis. This paper intends to summarize the latest development and application efforts for HOSS.

58 GEOSCIENCES↗

Interactive web mapping tools and custom subsurface cross-sections for interdisciplinary geologic investigation

Using Python-based geospatial analytics, open-source web mapping technologies, geophysical data models, and subsurface stratigraphy models from the Regional Geology Geologic Framework Model database assembled by Los Alamos National Laboratory, we developed a suite of web-based geologic investigation tools to identify and understand subsurface structures and geophysical properties concerning salt and shale formations within the contiguous United States. Coupled with a web map interface, these tools allow for the interactive visualization of various geologic data and demonstrate the ability to quickly generate custom subsurface cross-sections, borehole charts, and diagrams for azimuthal orientation data. These capabilities were developed for stakeholder and researcher use to facilitate informed decision making for spent nuclear waste disposition. However, these capabilities provide a flexible model for a variety of subsurface investigation needs, and we have demonstrated this flexibility by adapting these tools to meet visualization needs for various subsurface models within a web-based platform.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing

The fabrication of 3-D parts from CAD models by additive manufacturing (AM) is a disruptive technology that is transforming the metal manufacturing industry. The correlation between solidification microstructure and mechanical properties has been well understood in the casting and welding processes over the years. This paper focuses on extending these principles to additive manufacturing to understand the transient phenomena of repeated melting and solidification during electron beam powder melting process to achieve site-specific microstructure control within a fabricated component. In this paper, we have developed a novel melt scan strategy for electron beam melting of nickel-base superalloy (Inconel 718) and also analyzed 3-D heat transfer conditions using a parallel numerical solidification code (Truchas) developed at Los Alamos National Laboratory. The spatial and temporal variations of temperature gradient (G) and growth velocity (R) at the liquid-solid interface of the melt pool were calculated as a function of electron beam parameters. By manipulating the relative number of voxels that lie in the columnar or equiaxed region, the crystallographic texture of the components can be controlled to an extent. The analysis of the parameters provided optimum processing conditions that will result in columnar to equiaxed transition (CET) during the solidification. Furthermore, the results from the numerical simulations were validated by experimental processing and characterization thereby proving the potential of additive manufacturing process to achieve site-specific crystallographic texture control within a fabricated component.

43 PARTICLE ACCELERATORS↗

Development of integrated screening, cultivar optimization, and verification research (DISCOVR): A coordinated research-driven approach to improve microalgal productivity, composition, and culture stability for commercially viable biofuels production

To address major knowledge gaps and barriers to the commercial development of algal biomass for biofuels and co-products, a collaborative consortium, Development of Integrated Screening, Cultivar Optimization, and Verification Research (DISCOVR), was established in 2016. Funded by the U.S. Department of Energy (DOE) Bioenergy Technologies Office (BETO), this consortium constitutes a partnership between four DOE national laboratories - Pacific Northwest National Laboratory (PNNL), Los Alamos National Laboratory (LANL), the National Renewable Energy Laboratory (NREL), and Sandia National Laboratories (SNL) - and the Arizona Center for Algae Technology and Innovation (AzCATI) at Arizona State University. To address the barriers of strain selection for achieving high seasonal productivities with a suitable composition and culture resilience, a tiered strain down-selection pipeline is implemented. At Tier I, the temperature and salinity tolerance of strains is determined in flask cultures; at Tier II, the areal biomass productivity and composition is determined in climate-simulation photobioreactors; at Tier III, the productivity and culture stability are determined in outdoor raceways. The top performing strains move forward to long-term testing at the algae testbed site at AzCATI to generate annual biomass productivity data. Concurrent to the strain down-selection in the DISCOVR pipeline, hypotheses for increasing biomass productivity, shifting biomass composition to enhance intrinsic value, and improving culture stability and resistance to pests are also tested. Techno-economic analyses are carried out to determine whether promising findings from laboratory studies or proposed modifications in outdoor pond cultivation conditions translate into reductions in the minimum biomass selling price (MBSP). Notably, in the three years following the launch of DISCOVR, annual biomass productivity has increased from 11.7 to 17.6 g m -2 day -1 , resulting in an MBSP decrease from 824 to 611 $ ton -1 .

09 BIOMASS FUELS↗

A quasi-static Monte Carlo algorithm for the simulation of sub-prompt critical transients

A pseudo-time-dependent Monte Carlo algorithm suitable for simulating thermal reactor transients with timescales on the order of seconds is presented. An initial experimental implementation has been written into the Monte Carlo Application ToolKit (MCATK) developed at Los Alamos National Laboratory. The algorithm is essentially a combination of the fully time-dependent Monte Carlo algorithm, including the explicit simulation of delayed neutron precursors, and a quasi-static algorithm that does not use the point-kinetics equations. The fully time-dependent calculation is performed for some number of inactive and active micro time steps. The dynamic reactor time constant and delayed neutron precursor production rates are calculated directly from the active cycles, rather than from point-kinetics parameters. These quantities are then used to advance the neutron population and delayed neutron precursors forward in time across a macro time step. As a result, the method is applied to the C5G7-TD benchmark operating in steady state and in transient mode.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Quasi-differential neutron induced neutron emissions from 235 U, and 239 Pu

Uncertainty in nuclear reaction cross sections, angular distributions, and other nuclear data directly impact how well simulations of nuclear systems represent physical observations. Here, to determine how well the nuclear data in ENDF/B-VIII.0, JEFF-3.3, and JENDL-4.0 evaluations describe the physical behaviour of 235 U, and 239 Pu when subjected to a neutron flux, the neutron emission spectrum was measured for carbon, 93.0% 235 U, and 93.9% 239 Pu samples, and compared against detailed MCNP6 simulations. The measurements were performed at the Los Alamos Neutron Science Center using a quasi-differential method previously developed at Rensselaer Polytechnic Institute. The measurement spanned 0.82–20 MeV and 30–150 degrees. The measurements show there are a significant number of discrepancies between library predictions of the neutron yield and physical observation. A few of the main discrepancies found are described in this paper. Based on these results a new evaluation utilizing these results for carbon, 235 U, and 239 Pu is recommended.

235U↗

Utilization of ACE nuclear data file toolkit ACEtk to calculate relative sensitivity coefficients of point-kinetics parameters

Sensitivity and uncertainty methods are quintessential for nuclear criticality safety and experiment design. This type of analysis relies on calculations of sensitivity coefficients; sensitivity coefficients of the effective neutron multiplication factor with respect to some nuclear data are predominantly calculated and used. As a part of the Laboratory Directed Research & Development project EUCLID (Experiments Underpinned by Computational Learning for Improvements in nuclear Data) at Los Alamos National Laboratory, sensitivity coefficients of many radiation detector measurement responses with respect to nuclear data were investigated. Specifically, this paper outlines a method to calculate point-kinetics parameters relative sensitivity coefficients with respect to nuclear data. Point-kinetics parameters such as the prompt neutron decay constant, effective delayed neutron fraction, and neutron generation time are especially important to experimenters and reactor operators designing systems with dynamic neutron populations. This method couples capabilities of the ACE (A Compact ENDF) nuclear data file toolkit, ACEtk, with the ability to load cross sections into the radiation transport code Monte Carlo N-Particle (MCNP). In conclusion, key aspects of optimizing this method for a particular application and sensitivity profiles of the Jezebel criticality experiment are examined and discussed.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Large scale accelerator production of 225Ac: Effective cross sections for 78–192 MeV protons incident on 232Th targets

Actinium-225 and 213 Bi have been used successfully in targeted alpha therapy (TAT) in preclinical and clinical research. This paper is a continuation of research activities aiming to expand the availability of 225 Ac. The high energy proton spallation reaction on natural thorium metal target has been utilized to produce millicurie quantities of 225 Ac. The results of sixteen irradiation experiments of Th metal at beam energies between 78 and 200 MeV are summarized in this work. Irradiations have been conducted at Brookhaven National Laboratory (BNL) and Los Alamos National Laboratory (LANL), while target dissolution and processing was carried out at Oak Ridge National Laboratory (ORNL). Excitation functions for actinium and thorium isotopes as well as for some of the fission products are presented. The cross sections for production of 225 Ac range from 3.6 to 16.7 mb in the incident proton energy range of 78 to 192 MeV. Based on these data, production of Curie quantities of 225Ac is possible by irradiating a 5.0 g cm -2232 Th target for 10 days in either BNL or LANL proton irradiation facilities.

139Ce↗

Production of 230 Pa by proton irradiation of 232 Th at the LANL isotope production facility: Precursor of 230 U for targeted alpha therapy

Uranium-230 ( t 1/2 = 20.8 d) is an alpha-emitting radionuclide that has potential application in targeted alpha therapy (TAT) of cancer. Its parent isotope 230 Pa ( t 1/2 = 17.4 d), can be produced by proton irradiation of thorium metal targets. Preliminary 230 Pa production runs were performed at the Los Alamos National Laboratory Isotope Production Facility (LANL-IPF) using thin thorium metal targets and a proton beam energy of 15–30 MeV, followed by radiochemical separation of 230 Pa from the irradiated target matrix. The measured 230 Pa production yields were found to exceed the predicted values in most of the experiments that were performed. Furthermore, this data will inform further production efforts for providing 230 Pa/ 230 U for clinical trials.

07 ISOTOPE AND RADIATION SOURCES↗

Signatures of substorm related overshielding electric field at equatorial latitudes under steady southward IMF Bz during main phase of magnetic storm

During the geomagnetic storm periods, the convection electric field penetrates promptly to equatorial latitudes, causing an eastward electric field in the dayside ionosphere. Occasionally, the polarity of the dayside ionospheric electric field is inverted when the Interplanetary Magnetic Field (IMF) turns northward. Here, in this work, interesting observations of the strong westward electric field in the day side equatorial latitudes are presented, as evidenced by strong Counter Electrojet (CEJ) at Indian and Japanese sectors under the steady southward IMF Bz. The westward electric field perturbations are quite large with CEJ amplitude of ~-120 nT over the Indian sector (14–15 December 2006) and ~-220 nT for Japanese sector (7–8 November 2004). The plausible mechanisms for the observed overshielding electric fields under steady southward IMF Bz have been investigated in light of the possible role of substorm activity. The clear signatures of substorm were observed at geosynchronous particle flux measurements from LANL (Los Alamos National Laboratory) satellite and associated with sudden decrease in AL index. The observed variations of asymmetric ring current shows the enhancement of Partial Ring Current (PRC) at the dusk sector further supporting the substorm onset during that period which will probably enhance the overshielding due to increased Region 2 Field-Aligned Currents (R2 FACs). Finally, the observations of such significantly large amplitudes of CEJ associated with the substorm related overshielding events are sparse and the results bring out the important role of substorm onset and the development of PRC in accordance with the R2 FACs during intense magnetic storms which alter the day time equatorial electric field perturbations.

54 ENVIRONMENTAL SCIENCES↗

Characterization of SimulCam, a standoff Raman system for scientific support of SuperCam operations on Mars

During the development activities of SuperCam Calibration Target, target intended for one of the two first Raman instruments to be deployed on another planetary body, our group developed a laboratory instrument that could simulate to some extent the Raman capabilities of one of such instruments and could provide data with similar quality. The use of this kind of laboratory instruments has demonstrated its utility in the evaluation of potential calibration targets or anticipating the science outcome that an instrument could provide. The present work describes our laboratory setup to support SuperCam, evaluating similarities between both instruments, despite of differences in the hardware. Evaluation of data gathered by SuperCam on Mars and the availability of one replica of SuperCam’s Calibration Target allowed the comparison on the same set of targets, demonstrating how similar Signal-to-Noise Ratio (SNR) could be achieved from both instruments. The higher energy per pulse on SimulCam is compensated by a greater analytical footprint and the use of smaller collection optics. The results show how spectra obtained at representative distances of SuperCam are comparable. Operational principles are also comparable in terms of time resolution, and close in terms of spectral resolution. This similarity has allowed different science support works using SimulCam data, as well as the support to Mars detections using our setup. We provide examples of this support that will be shared with the community in different papers, as well as examples of possible operations activities that could benefit from experiments performed with SimulCam. We show how this setup can complement the two laboratory replicas in Los Alamos and Toulouse in providing support data to different experiments.

47 OTHER INSTRUMENTATION↗

Low hygroscopicity of ambient fresh carbonaceous aerosols from pyrotechnics smoke

Pyrotechnics (fireworks) displays are common for many cultures worldwide, with Independence Day celebrations occurring annually on July 4th as the most notable in the U.S. Given an episodic nature, fireworks aerosol properties are poorly characterized. Here we report observations of optical properties of fresh smoke emissions from Independence Day fireworks smoke sampled at Los Alamos National Laboratory, New Mexico U.S.A. on 4–5 July 2016. Aerosol optical properties were measured with a photoacoustic extinctiometer (PAX, DMT, Inc., Model 870 nm) at low RH < 30% and a humidity controlled nephelometry system (Ecotech, Inc., 450 nm Aurora). ‘Dry’ light scattering coefficient (σsp) increased from background < 15 Mm –1 reaching 120 Mm –1 (450 nm) as a 2-min event peak, while the absorption coefficient increased from background of 0.5–4.4 Mm –1 (870 nm). The event peak occurred at 00:35 on 5 July 2016, ~3 h after local fireworks events, and decreased to background by 04:00 on 5 July 2016, showing well mixed aerosol properties. A notable result is that the aerosol hygroscopic response, as characterized by the ratio of wet to dry light scattering or f (RH = 85%), declined to 1.02 at the peak fireworks influence from a background ~1.7. Strong wavelength dependence of light scattering with Ångström exponent ~2.2 throughout the event showed a size distribution dominated by sub-micrometer particles. Likewise, single scattering albedo at 870 nm remained constant throughout the event with ω = 0.86 ± 0.03, indicating light absorbing carbon, though not dominant, was mixed with organic carbon. Subsequent laboratory testing with ground-level sparklers showed that pyrotechnics smoke can generate a strong hygroscopic response, however. As confirmed with chemical analysis, the chemistry of the fireworks was key to defining the hygroscopic response. As a result, sparkler smoke was dominated by salt species such as hygroscopic potassium chloride while it lacked the black powder explosives in aerial fireworks that contribute organic and elemental carbon to its non-hygroscopic smoke.

54 ENVIRONMENTAL SCIENCES↗

Avian communities are decreasing with piñon pine mortality in the southwest

An increase in tree mortality is expected to occur worldwide due to climate-induced drought and increasing temperatures. The 2000–2002 drought in the southwestern United States was one of the most severe in the last 50 years. It led to a severe outbreak of bark beetles that resulted in high mortality of piñon pine ( Pinus edulis ) trees on the Pajarito Plateau in Northern New Mexico beginning in 2002. Many areas in piñon-juniper habitat had entire stands of piñon die leaving only juniper ( Juniperus spp.). Point count surveys were used to determine avian responses to tree mortality from 2003 to 2013. We also tested whether birds responded differently in sites that were mechanically thinned in 2002 and 2003 on Los Alamos National Laboratory property compared to sites not thinned. Junipers and dead piñon pines due to bark beetles and drought were removed on thinned sites. Richness, diversity, and abundance steadily declined after 2003. There was a 73% decrease in abundance and a 45% decrease in richness from 2003 to 2013. There was no difference in community composition between thinned and unthinned sites. Bird abundance and species richness declined faster in thinned sites than unthinned sites, but diversity decreased similarly in both treatments. Several species disappeared over time and some declined substantially. Finally, our results suggest a delay in bird responses to tree mortality on the Pajarito Plateau. Piñon mortality may be a significant threat to bird communities in the southwestern U.S., and tree thinning to control fire may be an added risk.

60 APPLIED LIFE SCIENCES↗

dfnWorks: A discrete fracture network framework for modeling subsurface flow and transport

DFNWORKS is a parallelized computational suite to generate three-dimensional discrete fracture networks (DFN) and simulate flow and transport. Developed at Los Alamos National Laboratory over the past five years, it has been used to study flow and transport in fractured media at scales ranging from millimeters to kilometers. The networks are created and meshed using DFNGEN, which combines FRAM (the feature rejection algorithm for meshing) methodology to stochastically generate three-dimensional DFNs with the LaGriT meshing toolbox to create a high-quality computational mesh representation. The representation produces a conforming Delaunay triangulation suitable for high performance computing finite volume solvers in an intrinsically parallel fashion. Flow through the network is simulated in dfnFlow, which utilizes the massively parallel subsurface flow and reactive transport finite volume code PFLOTRAN. A Lagrangian approach to simulating transport through the DFN is adopted within DFNTRANS to determine pathlines and solute transport through the DFN. Example applications of this suite in the areas of nuclear waste repository science, hydraulic fracturing and CO 2 sequestration are also included.

42 ENGINEERING↗

A Field Demonstration of an Active Reservoir Pressure Management through Fluid Injection and Displaced Fluid Extraction at the Rock Springs Uplift a Priority Geologic CO 2 Storage Site for Wyoming

Here, the University of Wyoming is partnered with Los Alamos National Laboratory, Lawrence Livermore National Laboratory, Battelle, and Water system Specialists Inc. to carry out a DOE funded brine extraction storage test (BEST) project at the Rock Springs Uplift (RSU), southwest Wyoming. The BEST projects are envisioned using a two-phased approach. The initial phase is to predict and monitor the differential pressure and injected fluid movement, and manage changes in formation pressure, and to develop a test-bed for deploying treatment technologies for extracted brines.

58 GEOSCIENCES↗