Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Room temperature photoluminescence from In{sub x}Al{sub (1−x)}N films deposited by plasma-assisted molecular beam epitaxy

InAlN films deposited by plasma-assisted molecular beam epitaxy exhibited a lateral composition modulation characterized by 10–12 nm diameter, honeycomb-shaped, columnar domains with Al-rich cores and In-rich boundaries. To ascertain the effect of this microstructure on its optical properties, room temperature absorption and photoluminescence characteristics of In{sub x}Al{sub (1−x)}N were comparatively investigated for indium compositions ranging from x = 0.092 to 0.235, including x = 0.166 lattice matched to GaN. The Stokes shift of the emission was significantly greater than reported for films grown by metalorganic chemical vapor deposition, possibly due to the phase separation in these nanocolumnar domains. The room temperature photoluminescence also provided evidence of carrier transfer from the InAlN film to the GaN template.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Combustion-process derived comparable performances of Zn-(In:Sn)-O thin-film transistors with a complete miscibility

Amorphous zinc-indium-tin oxide (a-ZITO) thin-film transistors (TFTs) have been prepared using a low-temperature combustion process, with an emphasis on complete miscibility of In and Sn contents. The a-ZITO TFTs were comparatively studied in detail, especially for the working stability. The a-ZITO TFTs all exhibited acceptable and excellent behaviors from Sn-free TFTs to In-free TFTs. The obtained a-ZTO TFTs presented a field-effect mobility of 1.20 cm{sup 2} V{sup −1} s{sup −1}, an on/off current ratio of 4.89 × 10{sup 6}, and a long-term stability under positive bias stress, which are comparable with those of the a-ZIO TFTs. The In-free a-ZTO TFTs are very potential for electrical applications with a low cost.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of nanostructure by physical vapor deposition with glancing angle deposition technique and its applications

A nanostructural thin film is one of the highly exploiting research areas particularly in applications in sensor, photocatalytic, and solar-cell technologies. In the past two decades, the integration of glancing-angle deposition (GLAD) technique to physical vapor deposition (PVD) process has gained significant attention for well-controlled multidimensional nanomorphologies because of fast, simple, cost-effective, and mass-production capability. The performance and functional properties of the coated thin films generally depend upon their nanostructural compositions, i.e., large aspect ratio, controllable porosity, and shape. Such structural platforms make the fabricated thin films very practical for several realistic applications. We therefore present morphological and nanostructural properties of various deposited materials, which included metals, i.e., silver (Ag), and oxide compounds, i.e., tungsten oxide (WO{sub 3}), titanium dioxide (TiO{sub 2}), and indium tin oxide (ITO). Different PVD techniques based on DC magnetron sputtering and electron-beam evaporation, both with the integrated GLAD component, were discussed. We further explore engineered nanostructures which enable controls of optical, electrical, and mechanical properties. These improvements led to several practical applications in surface-enhanced Raman, smart windows, gas sensors, self-cleaning materials and transparent conductive oxides (TCO)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of an anomalous dimension effect on thermal instability in amorphous-InGaZnO thin-film transistors

This paper investigates abnormal dimension-dependent thermal instability in amorphous indium-gallium-zinc-oxide (a-IGZO) thin-film transistors. Device dimension should theoretically have no effects on threshold voltage, except for in short channel devices. Unlike short channel drain-induced source barrier lowering effect, threshold voltage increases with increasing drain voltage. Furthermore, for devices with either a relatively large channel width or a short channel length, the output drain current decreases instead of saturating with an increase in drain voltage. Moreover, the wider the channel and the shorter the channel length, the larger the threshold voltage and output on-state current degradation that is observed. Because of the surrounding oxide and other thermal insulating material and the low thermal conductivity of the IGZO layer, the self-heating effect will be pronounced in wider/shorter channel length devices and those with a larger operating drain bias. To further clarify the physical mechanism, fast I{sub D}-V{sub G} and modulated peak/base pulse time I{sub D}-V{sub D} measurements are utilized to demonstrate the self-heating induced anomalous dimension-dependent threshold voltage variation and on-state current degradation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Height control of self-assembled quantum dots by strain engineering during capping

Strain engineering during the capping of III-V quantum dots has been explored as a means to control the height of strained self-assembled quantum dots. Results of Kinetic Monte Carlo simulations are confronted with cross-sectional Scanning Tunnel Microscopy (STM) measurements performed on InAs quantum dots grown by molecular beam epitaxy. We studied InAs quantum dots that are capped by In{sub x}Ga{sub (1−x)}As layers of different indium compositions. Both from our realistic 3D kinetic Monte Carlo simulations and the X-STM measurements on real samples, a trend in the height of the capped quantum dot is found as a function of the lattice mismatch between the quantum dot material and the capping layer. Results obtained on additional material combinations show a generic role of the elastic energy in the control of the quantum dot morphology by strain engineering during capping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical detection of spin hyperpolarization in InP

The electrical detection of surface spin polarization in Indium Phosphide (InP) is demonstrated. Using a planar four-terminal architecture on top of semi-insulating Fe:InP (001) wafers, optical orientation is separated from electrical detection. Spin filter tunnel contacts consisting of InP/oxide/Co reveal significant asymmetries in the differential resistance upon helicity change of the optical pumping. The iron-rich tunnel oxide provides the main spin selection mechanism. A reproducible helicity-dependent asymmetry as high as 18% could be observed at T = 55 K and an external induction field μ{sub 0}H = 1 T. At room temperature and zero external field, a helicity-dependent asymmetry of 6% suggests the stand-alone applicability of the device either as an electronic spin sensor or as an optical helicity sensor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studies on Nd{sub x}In{sub 1−x}O{sub 3} semiconducting thin films prepared by rf magnetron sputtering

Neodymium-substituted indium oxide (Nd{sub x}In{sub 1−x}O{sub 3}, NIO) semiconducting thin films fabricated by rf sputtering were investigated. It was found that the incorporation of Nd atoms would lead to broadening the optical band gap, suppressing the grain growth, and reducing the free carrier concentration. The field-effect transistors with different NIO (5%, 15%, and 25% Nd concentration of the targets) channel layers exhibited similar electrical stability under positive gate-bias-stress, but the ones with 15% and 25% Nd concentration displayed much better stability under negative gate-bias-stress. Detailed studies showed that the content of |Nd3d{sub 5/2}{sup 5}4f{sup 4}O2p{sup −1}> electron configuration decreased as the Nd concentration increased, resulting in the reduction of holes during negative-bias-stress. And the reduction of the |Nd3d{sub 5/2}{sup 5}4f{sup 4}O2p{sup −1}> content as the Nd concentration increased was ascribed to less overlap between the metal and ligand orbitals arose from large lattice expansion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of sputtering power on the optical properties of ITO thin films

Tin doped indium oxide films are widely used in transparent conducting coatings such as flat panel displays, crystal displays and in optical devices such as solar cells and organic light emitting diodes due to the high electrical resistivity and optical transparency in the visible region of solar spectrum. The deposition parameters have a commendable influence on the optical and electrical properties of the thin films. In this study, ITO thin films were prepared by RF magnetron sputtering. The properties of the films prepared under varying sputtering power were compared using UV- visible spectrophotometry. Effect of sputtering power on the energy band gap, absorption coefficient and refractive index are investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of annealing on graphene incorporated poly-(3-hexylthiophene):CuInS{sub 2} photovoltaic device

The effect of thermal annealing on the power conversion efficiency (PCE) of poly(3-hexylthiophene) (P3HT):CuInS{sub 2} quantum dot:graphene photovoltaic device has been studied by analyzing optical characteristics of composite films and electrical characteristics of the device with structure indium tin oxide/poly[ethylene dioxythiophene]:poly[styrene sulfonate] (ITO/PEDOT:PSS)/P3HT:CIS:graphene/LiF/aluminum. It was observed that after annealing at 120°C for 15 min a typical device containing 0.005 % w/w of graphene shows the best performance with a PCE of 1.3%, an open-circuit voltage of 0.44V, a short-circuit current density of 7.6 mA/cm{sup 2}, and a fill factor of 0.39. It is observed that the thermal annealing considerably enhances the efficiency of solar cells. However, an annealing at higher temperature such as at 140°C results in a decrease in the device efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface plasmon polariton assisted red shift in excitonic emission of semiconductor microflowers

We report on the study of metal nanoparticle-semiconductor hybrid system composed of β-indium sulfide (β-In{sub 2}S{sub 3}) and gold (Au) nanoparticles. β-In{sub 2}S{sub 3} micron sized flower like structures (∼1 μm) and Au nanoparticles (∼10 nm) were synthesized by chemical route. These Au nanoparticles have surface plasmon resonance at ∼ 520 nm. We study the influence of Au surface plasmon polaritons on the radiative properties of the β-In{sub 2}S{sub 3} microflowers. As a result of the coupling between the surface plasmon polaritons and the excitons there is a red shift ∼ 50 nm in emission spectrum of hybrid β-In{sub 2}S{sub 3}-Au system. Such hybrid systems provide scope for a control on the optical properties of semiconductor microstructures, thus rendering them suitable for specific device applications in optoelectronics and photovoltaics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of Au-Ag nanowire mesh fabrication by UV-induced approach

In an attempt to overcome the limitations of the presently prevailing transparent conducting electrode (TCE) - indium tin oxide (ITO) - many materials have been considered for replacing ITO. Recently, a novel method has been reported for the synthesis of Au-Ag nanowire (NW) mesh, and tested successfully for organic-light-emitting-diodes (OLEDs). It employs UV-induced reduction of gold- and silver- precursors to form Au-Ag NW mesh. In this report, Au-Ag NW mesh thin films are synthesized on glass substrates with an objective for use as facing-electrode for Organic Photovoltaics. Various issues and factors affecting the fabrication-process have been improved, and are also discussed here. The electrode showed good transmitivity, of around 95% (excluding that of glass substrate). The advantage of the technique is its simple processing method and cost-effectiveness.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of different tunneling mechanisms of In{sub x}Ga{sub 1−x}As/AlGaAs tunnel junction light-emitting transistors

The electrical and optical characteristics of tunnel junction light-emitting transistors (TJLETs) with different indium mole fractions (x = 5% and 2.5%) of the In{sub x}Ga{sub 1−x}As base-collector tunnel junctions have been investigated. Two electron tunneling mechanisms (photon-assisted or direct tunneling) provide additional currents to electrical output and resupply holes back to the base region, resulting in the upward slope of I-V curves and enhanced optical output under forward-active operation. The larger direct tunneling probability and stronger Franz-Keldysh absorption for 5% TJLET lead to higher collector current slope and less optical intensity enhancement when base-collector junction is under reverse-biased.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physical properties of Al{sub x}In{sub 1–x}N thin film alloys sputtered at low temperature

In this paper, we report on the structural, optical, and electrical properties of a wide compositional range of Al{sub x}In{sub 1–x}N thin layers deposited on glass and polyethylene terephthalate substrates. Al{sub x}In{sub 1–x}N layers of controlled composition were obtained by a simple reactive magnetron co-sputtering protocol, using a single aluminium target with indium insets, by varying the Al/In target surface area ratio, and the composition of the deposition atmosphere. The relevant physical properties were investigated and discussed. It is shown that the texture of the thin films is dependent on the cation ratio, while the bowing parameters of lattice constants and band gap values are larger than those of epitaxial layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Visible-light-induced instability in amorphous metal-oxide based TFTs for transparent electronics

We investigate the origin of visible-light-induced instability in amorphous metal-oxide based thin film transistors (oxide-TFTs) for transparent electronics by exploring the shift in threshold voltage (V{sub th}). A large hysteresis window in amorphous indium-gallium-zinc-oxide (a-IGZO) TFTs possessing large optical band-gap (≈3 eV) was observed in a visible-light illuminated condition whereas no hysteresis window was shown in a dark measuring condition. We also report the instability caused by photo irradiation and prolonged gate bias stress in oxide-TFTs. Larger V{sub th} shift was observed after photo-induced stress combined with a negative gate bias than the sum of that after only illumination stress and only negative gate bias stress. Such results can be explained by trapped charges at the interface of semiconductor/dielectric and/or in the gate dielectric which play a role in a screen effect on the electric field applied by gate voltage, for which we propose that the localized-states-assisted transitions by visible-light absorption can be responsible.

36 MATERIALS SCIENCE↗

Composite modulation of Fano resonance in plasmonic microstructures by electric-field and microcavity

Composite modulation of Fano resonance by using electric-field and microcavity simultaneously is realized in a plasmonic microstructure, which consists of a gold nanowire grating inserted into a Fabry-Perot microcavity composited of a liquid crystal layer sandwiched between two indium tin oxide layers. The Fano resonance wavelength varies with the applied voltage and the microcavity resonance. A large shift of 48 nm in the Fano resonance wavelength is achieved when the applied voltage is 20 V. This may provide a new way for the study of multi-functional integrated photonic circuits and chips based on plasmonic microstructures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Field emission properties of ZnO nanosheet arrays

Electron emission properties of electrodeposited ZnO nanosheet arrays grown on Indium tin oxide coated glass substrates have been studied. Influence of oxygen vacancies on electronic structures and field emission properties of ZnO nanosheets are investigated using density functional theory. The oxygen vacancies produce unshared d electrons which form an impurity energy state; this causes shifting of Fermi level towards the vacuum, and so the barrier energy for electron extraction reduces. The ZnO nanosheet arrays exhibit a low turn-on field of 2.4 V/μm at 0.1 μA/cm{sup 2} and current density of 50.1 μA/cm{sup 2} at an applied field of 6.4 V/μm with field enhancement factor, β = 5812 and good field emission current stability. The nanosheet arrays grown by a facile electrodeposition process have great potential as robust high performance vertical structure electron emitters for future flat panel displays and vacuum electronic device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Relation between the electroforming voltage in alkali halide-polymer diodes and the bandgap of the alkali halide

Electroforming of indium-tin-oxide/alkali halide/poly(spirofluorene)/Ba/Al diodes has been investigated by bias dependent reflectivity measurements. The threshold voltages for electrocoloration and electroforming are independent of layer thickness and correlate with the bandgap of the alkali halide. We argue that the origin is voltage induced defect formation. Frenkel defect pairs are formed by electron–hole recombination in the alkali halide. This self-accelerating process mitigates injection barriers. The dynamic junction formation is compared to that of a light emitting electrochemical cell. A critical defect density for electroforming is 10{sup 25}/m{sup 3}. The electroformed alkali halide layer can be considered as a highly doped semiconductor with metallic transport characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High In-content InGaN layers synthesized by plasma-assisted molecular-beam epitaxy: Growth conditions, strain relaxation, and In incorporation kinetics

We report the interplay between In incorporation and strain relaxation kinetics in high-In-content In{sub x}Ga{sub 1-x}N (x = 0.3) layers grown by plasma-assisted molecular-beam epitaxy. For In mole fractions x = 0.13–0.48, best structural and morphological qualities are obtained under In excess conditions, at In accumulation limit, and at a growth temperature where InGaN decomposition is active. Under such conditions, in situ and ex situ analyses of the evolution of the crystalline structure with the layer thickness point to an onset of misfit relaxation after the growth of 40 nm, and a gradual relaxation during more than 200 nm, which results in an inhomogeneous strain distribution along the growth axis. This process is associated with a compositional pulling effect, i.e., indium incorporation is partially inhibited in presence of compressive strain, resulting in a compositional gradient with increasing In mole fraction towards the surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗