Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GRAPHITIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Reorganization of graphite surfaces into carbon micro- and nanoparticles under high flux hydrogen plasma bombardment

Fine-grain graphite samples were exposed to high density low temperature (n{sub e}{approx}10{sup 20} m{sup -3}, T{sub e}{approx}1 eV) hydrogen plasmas in the Pilot-PSI linear plasma generator. Redeposition of eroded carbon is so strong that no external precursor gas injection is necessary for deposits to form on the exposed surface during the bombardment. In fact, up to 90% of carbon is redeposited, most noticeably in the region of the highest particle flux. The redeposits appear in the form of carbon microparticles of various sizes and structures. Discharge parameters influence the efficiency of the redeposition processes and the particle growth rate. Under favorable conditions, the growth rate reaches 0.15 {mu}m/s. The authors used high resolution scanning electron microscopy and transmission electron microscopy to study the particle growth mode. The columnar structure of some of the large particles points toward surface growth, while observation of the spherical carbon nanoparticles indicates growth in the plasma phase. Multiple nanoparticles can agglomerate and form bigger particles. The spherical shape of the agglomerates suggests that nanoparticles coalesce in the gas phase. The erosion and redeposition patterns on the samples are likely determined by the gradients in plasma flux density and surface temperature across the surface.

36 MATERIALS SCIENCE↗

SU-E-T-408: Determination of KQ,Q0-Factors From Water and Graphite Calorimetry in a 60 MeV Proton Beam

Purpose: To reduce the uncertainty of the beam quality correction factor k Q,Q0 , for scattered proton beams (SPB). This factor is used in dosimetry protocols, to determine absorbed dose-to-water with ionization chambers. For the Roos plane parallel chambers (RPPICs), the IAEA TRS-398 protocol estimates k Q,Q0 -factor to be 1.004(for a beam quality Rres=2 g.cm{sup 2}), with an uncertainty of 2.1%. Methods: A graphite calorimeter (GCal), a water calorimeter (WCal) and RPPICs were exposed, in a single experiment, to a 60 MeV non-modulated SPB. RPPICs were calibrated in terms of absorbed dose-to-water in a 20 MeV electron beam. The calibration coefficient is traceable to NPL's absorbed dose standards. Chamber measurements were corrected for environmental conditions, recombination and polarity. The WCal corrections include heat loss, heat defect and vessel perturbation. The GCal corrections include heat loss and absorbed dose conversion. Except for heat loss correction and its uncertainty in the WCal system, all major corrections were included in the analysis. Other minor corrections, such as beam profile non-uniformity, are still to be evaluated. Experimental k Q,Q0 -factors were derived by comparing the results obtained with both calorimeters and ionometry. Results: The absorbed dose-to-water from both calorimeters was found to be within 1.3% with an uncertainty of 1.2%. k Q,Q0 -factor for a RPPIC was found to be 0.998 and 1.011, with a standard uncertainty of 1.4% and 0.9% when the dose is based on the GCal and the WCal, respectively. Conclusion: Results suggest the possibility to determine k Q,Q0 -values for PPICs in SPB with a lower uncertainty than specified in the TRS-398 thereby helping to reduce uncertainty on absorbed dose-to-water. The agreement between calorimeters confirms the possibility to use GCal or WCal as primary standard in SPB. Because of the dose conversion, the use of GCal may lead to slightly higher uncertainty, but is, at present, considerably easier to operate.

07 ISOTOPE AND RADIATION SOURCES↗

Conductive composites based on exfoliated graphite

Conductive composites of exfoliated graphite (EG) and coal-tar pitch have been prepared by mixing the components. The electrical properties of the composites have been studied, and the results have been interpreted in terms of the percolation theory. The threshold EG content for electrical conduction is determined to be similar or equal to 1.5 wt %, independent of the properties of the pitch and EG.

01 COAL, LIGNITE, AND PEAT↗

Carbon nanoscrolls on the surface of nanocrystalline graphite and diamond films

Nanocrystalline graphite and diamond films with needlelike nanostructures on their surface have been obtained by plasma-enhanced chemical vapor deposition. According to the experimental data, these aggregates have the same nature for films of both types: they are tubular carbon nanoscrolls with a polygonal cross section. Nanoscrolls are formed by a helically folded graphene sheet; they look like twisted prisms. The needlelike prismatic structures have an average diameter in the range of 50‒500 nm, and their length reaches several micrometers. Possible mechanisms of formation of carbon nanostructures are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation defect clustering in graphite studied by synchrotron radiation scattering

The formation of radiation defect clusters as interstitial dislocation loops in pyrographite irradiated by 20-MeV carbon ions in a cyclotron has been studied by means of synchrotron radiation scattering. The experimental data are interpreted in terms of the Krivoglaz model and the model of deformation domain formation by dislocation loops. Parameters of the pyrographite crystal lattice in the deformed state upon ion irradiation have been determined using experimental data on the shift and broadening of the Bragg peaks. The results of experiments and their theoretical analysis indicate that the phenomena of the crystal lattice densification (shrinkage) and the radiation-induced swelling (increase in volume) observed for graphite irradiated by fast neutrons in a nuclear reactor can be studied in model experiments on charged particle accelerators using irradiation of the samples with carbon ions at much lower doses and significantly shorter exposure times.

36 MATERIALS SCIENCE↗

Evolution of the electronic properties of transition metal nanoclusters on graphite surface

The electronic properties of nanoclusters of transition (Ni, Co, Cr) and noble (Au, Cu) metals deposited on the surface of highly oriented pyrolytic graphite (HOPG) are studied using the method of X-ray photoelectron spectroscopy. The laws of variation of a change {Delta}E{sub b} in the binding energies of core-level electrons in the initial ({Delta}E{sub i}) and final ({Delta}E{sub f}) states of atoms in nanoclusters, the intrinsic widths {gamma} of photoelectron lines, and their singularity indices {alpha} as functions of the metal cluster size d are determined. A qualitative difference in behavior of the {Delta}E{sub i}(d) and {alpha}(d) values in metals of the two groups (Ni, Cr versus Co, Cu) is found. The values of the final-state energy ({Delta}E{sub f} < 0) and the line width ({Delta}{gamma} > 0) in the clusters of all metals studied vary in a similar manner. It is shown that a significant contribution to E{sub i} is due to a transfer of the valence-shell electrons at the cluster-substrate interface, which is caused by the contact potential difference. The value of an uncompensated charge per nanocluster is determined as a function of the cluster size and the number of atoms in the cluster. The behavior of {Delta}E{sub f}(d) is controlled by the Coulomb energy of a charged cluster and by a decrease in the efficiency of electron screening, which is different in the metals studied. The broadening of photoelectron lines is determined by a spread of the cluster sizes and by lower electron screening in the final Fermi system. An asymmetry of the core-level electron spectra of nanoclusters can be explained using notions about the electron-hole pair excitation near the Fermi level. The effect of the structure of the density of electron states in the d band of transition metals on the asymmetry of photoelectron lines is considered and it is concluded that this structure near the Fermi level qualitatively changes with a decrease in the nanocluster size. The obtained results indicate that the behavior of the electron subsystem of clusters of the d-metals in a size range of 2-10 nm under consideration is close to the behavior of a normal Fermi system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum magneto-optics of the graphite family

The optical conductivity of graphene, bilayer graphene, and graphite in quantizing magnetic fields is studied. Both dynamical conductivities, longitudinal and Hall's, are evaluated analytically. The conductivity peaks are explained in terms of electron transitions. Correspondences between the transition frequencies and the magneto-optical features are established using the theoretical results. We show that trigonal warping can be considered within the perturbation theory for strong magnetic fields larger than 1 T. The semiclassical approach is applied for weak fields when the Fermi energy is much larger than the cyclotron frequency. The main optical transitions obey the selection rule with {Delta}n = 1 for the Landau number n, but the {Delta}n = 2 transitions due to the trigonal warping are also possible. The Faraday/Kerr rotation and light transmission/reflection in quantizing magnetic fields are calculated. Parameters of the Slonczewski-Weiss-McClure model are used in the fit taking the previous de Haas-van Alphen measurements into account and correcting some of them in the case of strong magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The morphology, electron structure, and optical properties of self-assembled silicon nanostructures on the surface of highly oriented pyrolytic graphite

The results of studies of the morphology, electronic structure, and optical properties of self-assembled silicon nanostructures on the surface of highly oriented pyrolytic graphite are reported. The structures are fabricated by electron-beam-assisted evaporation in high-vacuum conditions. It is found that, at thicknesses of about one monolayer, the atomic structure of the layer is similar to that of graphene with the interatomic spacing {approx}2.4 A. At film thicknesses larger than one monolayer, clusters about 5 nm in dimensions are formed on the substrate surface.

36 MATERIALS SCIENCE↗

Graphite/p-SiC Schottky Diodes Prepared by Transferring Drawn Graphite Films onto SiC

Graphite/p-SiC Schottky diodes are fabricated using the recently suggested technique of transferring drawn graphite films onto p-SiC single-crystal substrates. The current–voltage and capacitance–voltage characteristics are measured at different temperatures and at different frequencies of a small-signal AC signal, respectively. The temperature dependences of the potential-barrier height and of the series resistance of the graphite/p-SiC junctions are measured and analyzed. The dominant mechanisms of the charge–carrier transport through the diodes are determined. It is shown that the dominant mechanisms of the transport of charge carriers through the graphite/p-Si Schottky diodes at a forward bias are multi-step tunneling recombination and tunneling described by the Newman formula (at high bias voltages). At reverse biases, the dominant mechanisms of charge transport are the Frenkel–Poole emission and tunneling. It is shown that the graphite/p-SiC Schottky diodes can be used as detectors of ultraviolet radiation since they have the open-circuit voltage V{sub oc} = 1.84 V and the short-circuit current density I{sub sc} = 2.9 mA/cm{sup 2} under illumination from a DRL 250-3 mercury–quartz lamp located 3 cm from the sample.

36 MATERIALS SCIENCE↗

Numerical Simulation of the Structure and Mechanical Properties of Silicene Layers on Graphite during the Lithium Ion Motion

The molecular dynamics method is applied to study structural and mechanical effects appearing during the lithium ion motion in a dc electric field along a planar channel formed by perfect silicene sheets and sheets containing vacancy-type defects. Mono-, di-, tri-, and hexavacancies of rather densely and uniformly filled silicene sheets are arranged one above the other on a graphite substrate. The times of Li{sup +} ion passage through silicene channels with various gaps are determined. The construction of Voronoi polyhedra and truncated polyhedrons, whose centers coincide with the moving ion position allowed revealing the structural features inherent to the two-dimensional layered structure. The nature of stresses appearing in silicene sheets most critical to ion motion over the channel is determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of Ordered Silicon Structures on a Graphite Surface

The possibility of formation of ordered silicon structures, including silicene, on the graphite substrate surface has been studied. The effect of various conditions of depositing silicon atoms on a finite structure has also been studied. The data on the surface morphology has been obtained by atomic force microscopy, and the electronic structure has been studied by Auger electron spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge Transfer Processes in a Sodium-Doped Carbon Composite Based on Fullerenes and Thermally Exfoliated Graphite

The results of doping of a carbon composite material, in which fullerenes are located in a conductive matrix based on thermally exfoliated graphite, with a sodium dopant are presented. Charge transfer processes taking place in samples with different initial ratios of components are studied. It turns out that the electrical resistivity of the samples increases with the introduction of sodium and an increase in its content, since the mobility of the main charge carriers, which are holes as in the undoped material, decreases. The concentration of charge carriers in different types of samples varies in both directions and can increase by more than an order of magnitude. It is concluded that Na plays an ambiguous role. It can contribute not only to the generation of free electrons, but also to an additional increase in the concentration of various defects that can generate free holes and can affect, being effective traps and scattering centers, all types of charge carriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Properties of Fullerene–Thermally Exfoliated Graphite Composites Doped with Sodium

The magnetic properties (field range H = 0–50 kOe, temperature range T = 3–300 K), and structural features of a sodium-doped carbon composite material based on fullerene C{sub 60} and thermally exfoliated graphite (TEG) are studied. The material is obtained with different ratios of the components by sintering at a pressure of 7 GPa and T = 600°C, at which it is found that significant amorphization of the crystal lattice of the initial C{sub 60} occurs. The dia-, para-, and ferromagnetic components (M{sub D}, M{sub PM}, and M{sub FM}) were separated from the total magnetic moment of the samples under study. It is found that a sodium dopant has no effect on the magnetic properties of the composite. Analysis of the M{sub PM}(H) field dependences by using the Brillouin function for the fullerene-containing sample (i.e., without TEG) makes it possible to determine the quantum number of the total angular momentum of paramagnetic (PM) centers. Its value is found to be J = 1, which corresponds to elementary magnetic moment μ{sub PM} = 2μ{sub B} of a PM center. The concentration of PM centers is estimated at the level of N{sub PM} ≈ (2–5) × 10{sup 18} g{sup –1} for most samples, including the material without TEG. The introduction of TEG into the initial composition and an increase in its proportion in the composite leads to a strong increase in the magnetic moment, which is explained by an increase in both the J value and the concentration of PM centers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Unoccupied Electronic States of the Ultrathin Diphenylphthalide Films on the Surface of the Highly Oriented Pyrolytic Graphite

The results of diagnostics of the atomic composition of a diphenylphthalide (DPP) film thermally precipitated in vacuum by the of X-ray photoelectric spectroscopy (XPS) method are presented. The results of examination of the unoccupied electronic states of the ultrathin DPP films with the thickness up to 10 nm on the surface of the highly oriented pyrolytic graphite (HOPG) by the total current spectroscopy (TCS) method in the energy range from 5 to 20 eV above E{sub F} are presented. In this range, the main maxima in the total current spectra are identified. The analysis of the TCS results with consideration of the theoretical calculation results has shown that the low-energy maxima observed at the energies from 6 to 7.5 eV are induced predominately by π* electron orbitals of DPP films. The values of the energy E{sub vac} in relation to E{sub F}, i.e., of the electron work function in the DPP films at the film thickness of 5–10 nm, are found experimentally at a level of 4.3 ± 0.1 eV. The negative charge transfer from an organic film to the substrate corresponds to the formation of the HOPG/DPP boundary potential barrier during the thermal deposition of the DPP film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intercepting Grids Made of Anisotropic Pyrolytic Graphite in Electron Guns with a Dispenser Cathode

The results of experimental studies into the application of anisotropic pyrolytic graphite (APG) as grid structures in power microwave devices with a dispenser cathode are detailed. The dependences of emission characteristics of molybdenum, hafnium, and APG in diodes and electron guns on the electron-flow power dissipated at the studied samples and on cathode temperature are presented. It is demonstrated that the power dissipation capacity of APG grid structures (without parasitic thermionic emission) is up to 20 and 9 times higher than that of molybdenum and hafnium grids, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of Oxygen-Doped Graphitic Carbon Nitride from Thiourea

We have synthesized oxygen-doped graphite-like carbon nitride (g-C{sub 3}N{sub 4}) by the thermal treatment of the thiourea at 450–550°C. With an increase in the annealing temperature, the oxygen concentration in g-C{sub 3}N{sub 4} increases, and the band-gap of the material decreases from 2.64 to 2.47 eV. The semiconductor properties of g-C{sub 3}N{sub 4} doped with oxygen are confirmed by its high photocatalytic activity, determined by decoloration of a Rhodamine B aqueous solution in the presence of g-C{sub 3}N{sub 4} upon irradiation with visible light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗