Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Floating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

A Metric Space with LCOE Isolines for Research Guidance in wind and hydrokinetic energy systems

This paper introduces a new Metric Space to guide the design of advanced wind energy systems and hydrokinetic energy converters such as tidal, ocean current and riverine turbines. The Metric Space can analyse farms that combine different or identical turbines and stand-alone turbines. The first metric (M1) of the space considers the efficiency of the turbines in the farm, which is also proportional to the specific power per swept area at a given wind/water velocity (W/m 2 ). The second metric (M2) describes the specific rotor area per unit of mass of the turbines (m 2 /kg). Both metrics depend on the primary design characteristics of the turbines, such as swept area, system size and mass, materials and efficiency, and are independent at first from external characteristics, such as atmospheric and ocean site conditions, cost of materials and economic factors. Combining both metrics, and for a given set of external characteristics, the resulting Metric Space M2/M1 displays the Levelized Cost of Energy (LCOE) standards as isolines. This graphical representation provides a quick understanding of the cost and state of the technology. It also offers a practical guidance to choose the research tasks and strategy to design advanced wind and hydrokinetic energy systems. The paper applies the new Metric Space to several case studies, including large and small onshore wind turbines, floating and bottom-fixed offshore wind turbines, downwind rotors, multi-rotor and hybrid systems, airborne wind energy systems, wind farms and tidal energy converters.

17 WIND ENERGY↗
DOE OSTI2021

Challenges, opportunities, and a research roadmap for downwind wind turbines

This study investigates the challenges and opportunities presented by downwind wind turbines and offers a roadmap of future research pathways to maximize their potential. Multidisciplinary design, analysis, and optimization comparison studies between upwind and downwind configurations on a modern 10-MW offshore wind turbine are presented to support the discussion. On one hand, the downwind rotor is found to consistently have a smaller swept area under loading. As a result, the downwind design produces less annual energy production (-1.2%). On the other hand, lighter blades for the downwind configuration lead to lower capital costs (-1.7%), so there is little difference in the levelized cost of energy between the two. Key ultimate and fatigue loads are compared, with some values increasing in the downwind configuration, while others decrease. The impact of a downwind configuration on the tower and the impacts of cone and tilt angles and free-yaw system on the levelized cost of energy are also investigated. The results show a mix of some advantages and disadvantages. Given these results, four areas of research in advanced controls, highly tilted rotors, higher fidelity aerodynamic models, and floating wind are proposed for downwind wind turbines.

17 WIND ENERGY↗
DOE OSTI2023

Development of a wind turbine model and simulation platform using an acausal approach: Multiphysics modeling, validation, and control

This article presents the development of the Control-oriented, Reconfigurable, and Acausal Floating Turbine Simulator (CRAFTS). CRAFTS has a modular, hierarchical model architecture that enables rapid and accurate simulation of wind turbines. The architecture facilitates the incorporation of model variants, and its system reconfiguration features help simulate multiple design variants. CRAFTS also supports the integration of models developed on a causality-free platform (e.g., Modelica®) with existing causal models. This article focuses on the validation of a land-based wind turbine models against OpenFAST, an industry-standard platform, for several test cases. Closed-loop scenarios are also tested using the standard ROSCO controller and compared against OpenFAST. In addition, a nonlinear controller developed in our prior work is also evaluated. The test cases demonstrate the user-friendly and computationally efficient capabilities of CRAFTS to facilitate control co-design, assist in incorporating multiphysics models, be adaptable to design variants, and allow for rapid simulations to validate models and evaluate controllers.

17 WIND ENERGY↗
DOE OSTI2022

Computational Methodology to Simulate Pyrometallurgical Processes in a Secondary Lead Furnace

Pyrometallurgical recovery of nonferrous metals involves a combination of thermally intensive transformations during exothermic gas-phase reactions, endothermic decomposition of solid charge, and melting of simpler solids. In the recovery of secondary lead, simultaneous thermal effects in a reverberatory-style furnace cause a melt pool to accumulate at the bottom, with lighter solids (slag) floating above and gaseous products from decomposition of the charge diffusing through the gas–slag interface. Species from oxy-fuel combustion of natural gas, species profiles from smelting reactions, and the formation of a melt pool consisting primarily of lead are simulated via a time-averaged formulation. Predictions of outflow are compared with preset inflow profiles to ensure conservation of mass. Thermal profiles for solid, liquid, and gas phases are presented by species. A novel method is implemented to model the latent heat of fusion using a heterogeneous chemical reaction. The simulation is conducted in Simcenter STAR-CCM+ v. 16.02.009-R8.

Rao, Vivek↗
DOE OSTI2018

Tungsten isotopic constraints on the origin and evolution of the Moon

Here we report the Moon most likely formed as the result of a collision between the proto-Earth and a differentiated body possibly the size of Mars (Cameron and Benz, 1991; Hartmann and Davis, 1975). The enormous amount of energy released by this giant impact caused widespread melting on the proto-Earth and the ejection of material into Earth’s orbit from which the Moon subsequently accreted. Upon accretion of the Moon, the lunar mantle underwent global silicate differentiation most likely facilitated by a lunar magma ocean (e.g. Wood et al., 1970). Magma ocean crystallization likely produced the wide diversity of lunar source rocks and involved the successive crystallization of mafic cumulates consisting of olivine and pyroxene, followed by crystallization of plagioclase which floated to the lunar surface to form the lunar crust consisting of ferroan anorthosites (FAN). Lastly, the residual liquid of the lunar magma ocean represents a separate component within the Moon termed KREEP (enriched in Potassium K, Rare Earth Elements, and Phosphorous). Re-melting of these magma ocean crystallization products of the low-Ti and high-Ti mare basalt source regions as well as the formation of Mg-suite lunar highland rocks.

58 GEOSCIENCES↗
DOE OSTI2016

Data Movement in Data-Intensive High Performance Computing.

The cost of executing a floating point operation has been decreasing for decades at a much higher rate than that of moving data. Bandwidth and latency, two key metrics that determine the cost of moving data, have degraded significantly relative to processor cycle time and execution rate. Despite the limitation of sub-micron processor technology and the end of Dennard scaling, this trend will continue in the short-term making data movement a performance-limiting factor and an energy/power efficiency concern. Even more so in the context of large-scale and data-intensive systems and workloads. This chapter gives an overview of the aspects of moving data across a system, from the storage system to the computing system down to the node and processor level, with case study and contributions from researchers at the San Diego Supercomputer Center, the Oak Ridge National Laboratory, the Pacific Northwest National Laboratory, and the University of Delaware.

Data Movement↗
DOE OSTI2017

Performance Characterization of De Novo Genome Assembly on Leading Parallel Systems.

De novo genome assembly is one of the most important and challenging computational problems in modern genomics; further, it shares algorithms and communication patterns important to other graph analytic and irregular applications. Unlike simulations, it has no floating point arithmetic and is dominated by small memory transactions within and between computing nodes. In this work, we focus on the highly scalable HipMer assembler and identify the dominant algorithms and communication patterns, also using microbenchmarks to capture the workload. We evaluate HipMer on a variety of platforms from the latest HPC systems to ethernet clusters. HipMer performs well on all single node systems, including the Xeon Phi manycore architecture. Given large enough problems, it also demonstrates excellent scaling across nodes in an HPC system, but requires a high speed network with low overhead and high injection rates. Our results shed light on the architectural features that are most important for achieving good parallel efficiency on this and related problems.

Ellis, Marquita↗
DOE OSTI2024

Inscribing geodesic circles on the face of the superstratum

Abstract We use families of circular null geodesics as probes of a family of microstate geometries, known as (1,0, n) superstrata. These geometries carry a left-moving momentum wave and the behavior of some of the geodesic probes is very sensitive to this background wave. The left-moving geodesics behave like BPS particles and so can be placed in circular orbits anywhere in the geometry and actually “float” at fixed radius and angle in the three-dimensional “capped BTZ” geometry. The right-moving geodesics behave like non-BPS particles. We show that they provide a simple geometric characterization of the black-hole bound: when the momentum charge of the geometry is below this bound, such geodesics can be placed anywhere, but exceeding the bound, even by a small amount, means these geodesics are restricted to the deep interior of the geometry. We also show that for left-moving string probes, the tidal forces remain comparable with those of global AdS 3 . Nevertheless, for some of these probes, the “bumps” in the geometry induce an oscillatory mass term and we discuss how this can lead to chaotic scrambling of the state of the string.

Physics↗
DOE OSTI2018

Measurements of Higgs boson properties in the diphoton decay channel in proton-proton collisions at $\sqrt{s} =$ 13 TeV

Measurements of Higgs boson properties in the H → γγ decay channel are reported. The analysis is based on data collected by the CMS experiment in proton-proton collisions at $ \sqrt{s}=13 $ TeV during the 2016 LHC running period, corresponding to an integrated luminosity of 35.9 fb$^{−1}$. Allowing the Higgs mass to float, the measurement yields a signal strength relative to the standard model prediction of 1.18$_{− 0.14}^{+ 0.17}$ = 1.18$_{− 0.11}^{+ 0.12}$ (stat)$_{− 0.07}^{+ 0.09}$ (syst)$_{− 0.06}^{+ 0.07}$ (theo), which is largely insensitive to the exact Higgs mass around 125 GeV. Signal strengths associated with the different Higgs boson production mechanisms, couplings to bosons and fermions, and effective couplings to photons and gluons are also measured.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

Development of Friction Stir Welding Technologies for In-Space Manufacturing

Friction stir welding (FSW) has emerged as an attractive process for fabricating aerospace vehicles. Current FSW state-of-the-art uses large machines that are not portable. However, there is a growing need for fabrication and repair operations associated with in-space manufacturing. This need stems from a desire for prolonged missions and travel beyond low-earth orbit. To address this need, research and development is presented regarding two enabling technologies. The first is a self-adjusting and aligning (SAA) FSW tool that drastically reduces the axial force that has historically been quite large. The SAA-FSW tool is a bobbin style tool that floats freely, without any external actuators, along its vertical axis to adjust and align with the workpiece s position and orientation. Successful butt welding of 1/8 in. (3.175 mm) thick aluminum 1100 was achieved in conjunction with a drastic reduction and near elimination of the axial process force. Along with the SAA-FSW, an innovative in-process monitor technique is presented in which a magnetoelastic force rate-of-change sensor is employed. The sensor consists of a magnetized FSW tool that is used to induce a voltage in a coil surrounding the tool when changes to the process forces occur. The sensor was able to detect 1/16 in. (1.5875 mm) diameter voids. It is concluded that these technologies could be applied toward the development of a portable FSW machine for use in space.

42 ENGINEERING↗
DOE OSTI2025

Isolated vesicles in submarine pumice: insights from the 2019 Volcano F eruption, Kingdom of Tonga

No reliable method can distinguish between subaerial and submarine pumice, but recent work shows that highly vesicular (total porosity, φ > 65%) submarine pumice from the 2012 Havre and 2021 Fukutoku Oka-no-Ba eruptions contains abundant isolated porosity (connectivity, C < 0.6). This differs from textural measurements of subaerial pumice with similarly high vesicularities, where high connectivities (C > 0.8) are often measured. To investigate the implications of this under-studied texture for bubble nucleation, growth, and coalescence dynamics at submarine eruptions, we analyze the textural characteristics of rafted pumice clasts from the 2019 submarine eruption of Volcano F, located along the Tonga-Kermadec Arc. We examined clasts collected while floating near the vent (50–200 km) and distally on the shores of Fiji (900 km). Using helium pycnometry and X-ray tomography (XRT), we quantified porosity and connectivity in 45 pumice lapilli, classifying them by vesicle macrotexture and edge morphology. Microvesicular clasts, the majority of which have breadcrust and cauliflower textures, exhibit the lowest connectivities (C = 0.61 ± 0.2), while macrovesicular clasts have high connectivities with C ~ 1. We propose that isolated porosity abundance varies according to clast location in the eruption column post-fragmentation. Microvesicular clasts erupted on the edges of the column and experienced high levels of seawater ingestion and subsequent quenching of the entire clast. Macrovesicular clasts, in contrast, erupted in the center of the eruption column and were thus thermally insulated, allowing magmatic bubbles in the molten pumice to nucleate, grow, and coalesce for longer. Our results and interpretation imply that low connectivity, microvesicular clasts preserve pre and syn-eruptive bubble processes at the 2019 Volcano F eruption.

Permeability↗
DOE OSTI2016

Taxonomy of the order Mononegavirales : update 2016

In 2016, the order Mononegavirales was emended through the addition of two new families ( Mymonaviridae and Sunviridae ), the elevation of the paramyxoviral subfamily Pneumovirinae to family status ( Pneumoviridae ), the addition of five free-floating genera ( Anphevirus, Arlivirus, Chengtivirus, Crustavirus , and Wastrivirus ), and several other changes at the genus and species levels. In this article we present the updated taxonomy of the order Mononegavirales as now accepted by the International Committee on Taxonomy of Viruses (ICTV).

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

A genetic meta-algorithm-assisted inversion approach: hydrogeological study for the determination of volumetric rock properties and matrix and fluid parameters in unsaturated formations

An evolutionary inversion approach is suggested for the interpretation of nuclear and resistivity logs measured by direct-push tools in shallow unsaturated sediments. The efficiency of formation evaluation is improved by estimating simultaneously (1) the petrophysical properties that vary rapidly along a drill hole with depth and (2) the zone parameters that can be treated as constant, in one inversion procedure. In the workflow, the fractional volumes of water, air, matrix and clay are estimated in adjacent depths by linearized inversion, whereas the clay and matrix properties are updated using a float-encoded genetic meta-algorithm. The proposed inversion method provides an objective estimate of the zone parameters that appear in the tool response equations applied to solve the forward problem, which can significantly increase the reliability of the petrophysical model as opposed to setting these parameters arbitrarily. The global optimization meta-algorithm not only assures the best fit between the measured and calculated data but also gives a reliable solution, practically independent of the initial model, as laboratory data are unnecessary in the inversion procedure. The feasibility test uses engineering geophysical sounding logs observed in an unsaturated loessy-sandy formation in Hungary. The multi-borehole extension of the inversion technique is developed to determine the petrophysical properties and their estimation errors along a profile of drill holes. The genetic meta-algorithmic inversion method is recommended for hydrogeophysical logging applications of various kinds to automatically extract the volumetric ratios of rock and fluid constituents as well as the most important zone parameters in a reliable inversion procedure.

58 GEOSCIENCES↗
DOE OSTI2018

Development of a Computer-Aided Differential Diagnosis System to Distinguish Between Usual Interstitial Pneumonia and Non-specific Interstitial Pneumonia Using Texture- and Shape-Based Hierarchical Classifiers on HRCT Images

A computer-aided differential diagnosis (CADD) system that distinguishes between usual interstitial pneumonia (UIP) and non-specific interstitial pneumonia (NSIP) using high-resolution computed tomography (HRCT) images was developed, and its results compared against the decision of a radiologist. Six local interstitial lung disease patterns in the images were determined, and 900 typical regions of interest were marked by an experienced radiologist. A support vector machine classifier was used to train and label the regions of interest of the lung parenchyma based on the texture and shape characteristics. Based on the regional classifications of the entire lung using HRCT, the distributions and extents of the six regional patterns were characterized through their CADD features. The disease division index of every area fraction combination and the asymmetric index between the left and right lungs were also evaluated. A second SVM classifier was employed to classify the UIP and NSIP, and features were selected through sequential-forward floating feature selection. For the evaluation, 54 HRCT images of UIP (n = 26) and NSIP (n = 28) patients clinically diagnosed by a pulmonologist were included and evaluated. The classification accuracy was measured based on a fivefold cross-validation with 20 repetitions using random shuffling. For comparison, thoracic radiologists assessed each case using HRCT images without clinical information or diagnosis. The accuracies of the radiologists’ decisions were 75 and 87%. The accuracies of the CADD system using different features ranged from 70 to 81%. Finally, the accuracy of the proposed CADD system after sequential-forward feature selection was 91%.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2016

Chamber measurements of high CO 2 emissions from a rainforest stream receiving old C-rich regional groundwater

Carbon emissions from fluvial systems are a key component of local and regional carbon cycles. We used floating chambers to investigate the CO 2 flux from stream water to air (f CO 2 ) in the Arboleda, a stream in the lowland rainforest of Costa Rica, fed partly by old regional groundwater high in dissolved inorganic carbon (DIC). Drifting and static chambers showed f CO 2 averaging 35.5 and 72.7 μmol C m –2 s –1 , respectively, bracketing the previously-published f CO 2 value of 56 μmol C m –2 s –1 obtained using tracer methods in this stream. These values are much higher than most f CO 2 data in the literature and reflect a large flux of deep crustal (non-biogenic) CO 2 out of the Arboleda, a flux that does not represent a component of ecosystem respiration. Static chambers appeared to overestimate f CO 2 by creating artificial turbulence, while drifting chambers may have underestimated f CO 2 by under-sampling areas of potentially high gas exchange (e.g., riffles around coarse woody debris obstructions). Both static and drifting chambers revealed high spatial heterogeneity in f CO 2 at the scale of 5–30 m reaches. Some observed temporal trends were localized, e.g., among three reaches with repeated measurements through the wet and dry seasons, (1) only the reach located between the other two showed significantly lower f CO 2 during the dry season, and (2) the highest and lowest f CO 2 were consistently observed in the reaches farthest upstream and downstream, respectively. As a result, streams like the Arboleda receiving significant inputs of high-DIC regional groundwater merit additional study as hotspots for C emissions from terrestrial ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Determination of Ice Characteristics for Marine Hydroengineering Structures

Problems and potential approaches to determining ice characteristics for sea hydroengineering structures design are considered. A system for numerical modeling of ice dynamics is presented. The system may be used to define ice characteristics on approaches to structures with due regard for local hydrometeorological conditions and ice loads on structures. System application examples are presented for determining computational scenarios for ice loads at structures of the Pevek floating nuclear power plant (FNPP), as well as for the breakwater pier under reconstruction in Vanino. A scenario approach is used to determined ice loads.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Signature of Ferromagnetic Phase at Low Temperature in Low-Doped La{sub 0.88}Ca{sub 0.12}MnO{sub 3} Single Crystal

The confirmation of ferromagnetism at low temperature in a low-doped manganites system is always debatable. It is for the first time, electrical, magnetic, and thermal properties have been measured for manganites single crystal of La{sub 0.88}Ca{sub 0.12}MnO{sub 3} by using a floating-zone method. The electrical resistivity shows a perceptible change of resistance at a low temperature which can be viewed as a signature of the ferromagnetic phase. The ferromagnetic phase of the investigated La{sub 0.88}Ca{sub 0.12}MnO{sub 3} single crystal with Curie temperature of T{sub C} = 120 K which is in closed agreement with ac-susceptibility measurement. An analysis of the specific heat suggests the transition peak (T{sub P}) coincides with the T{sub C} and attains 1.2 J mol{sup −1} K at 116 K. The magnetoresistance (MR) and temperature coefficient of resistance (TCR) were found to be 69% and 10% respectively, which expands its subtle potential for applications in spintronics and thermistor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Optimal size of the block in block GMRES on GPUs: computational model and experiments

The block version of GMRES (BGMRES) is most advantageous over the single right hand side (RHS) counterpart when the cost of communication is high while the cost of floating point operations is not. This is the particular case on modern graphics processing units (GPUs), while it is generally not the case on traditional central processing units (CPUs). Here, in this paper, experiments on both GPUs and CPUs are shown that compare the performance of BGMRES against GMRES as the number of RHS increases, with a particular focus on GPU performance. The experiments indicate that there are many cases in which BGMRES is slower than GMRES on CPUs, but faster on GPUs. Furthermore, when varying the number of RHS on the GPU, there is an optimal number of RHS where BGMRES is clearly most advantageous over GMRES. A computational model for the GPU is developed using hardware specific parameters, providing insight towards how the qualitative behavior of BGMRES changes as the number of RHS increase, and this model also helps explain the phenomena observed in the experiments.

97 MATHEMATICS AND COMPUTING↗