Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Finite element model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

SC Wall-to-RC Basemat Over-Strength Connection: Behavior and Design

This paper presents results from experimental and analytical investigations conducted to evaluate the lateral load behavior and capacity of steel-plate composite (SC) wall-to-reinforced concrete (RC) basemat connections. Two SC wall-to-reinforced concrete basemat connection specimens were tested. These SC wall specimens had a height-to-length ratio of 0.6 and did not include boundary elements. The experimental results include the lateral force-displacement (V-Δ) responses of the specimens and observations of local damage such as steel plate local buckling and concrete crushing. 3D finite element models were developed and benchmarked using the experimental results. The benchmarked models were used to conduct analytical parametric studies, expand the database, and gain additional insights into the behavior of SC wall-to-RC basemat connections. The parameters included in analytical investigations were the wall aspect ratio (h/lw), reinforcement ratio (ρ), and wall thickness (T).

Kurt, Efe G.↗
DOE OSTI2021

Boride-Carbon Hybrid Technology for Ultra-Wear and Corrosive Conditions

This work discusses a study on a surface treatment for creating extremely durable low-friction, wear and corrosion-resistant surfaces for tribological components in harsh conditions. A duplex surface treatment was developed that combines the advantages of ultra-fast electrochemical boriding with those of hard tetrahedral amorphous carbon coatings. The friction and wear properties of the duplex treatment are compared to the boride-only treatment of AISI 1045 steel, while corrosion and contact fatigue behaviors of the duplex layer are compared to that of the single-layer carbon coating on low carbon steel. The duplex treatment yields wear rates as low as 6 × 10−8 mm3·N−1·m−1 and a coefficient of friction of 0.14 when tested against a steel counter face. The contact fatigue impact tests reveal that the high hardness of 1200 HV0.05 of the borided layer in the duplex treatment leads to higher resistance against indentation but is accompanied by a higher incidence of crack initiation, being in good agreement with the finite-element modeling of nanoindentation results. The duplex coatings exhibit resistance to pinhole corrosion as evidenced by a 3 h exposure to 15% HCl at room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Heat Diffusion in High-Cp Nb3Sn Composite Superconducting Wires

A major focus of Nb3Sn accelerator magnets is on significantly reducing or eliminating their training. Demonstration of an approach to increase the Cp of Nb3Sn magnets using new materials and technologies is very important both for particle accelerators and light sources. It would improve thermal stability and lead to much shorter magnet training, with substantial savings in machines’ commissioning costs. Both Hypertech and Bruker-OST have attempted to introduce high-Cp elements in their wire design. This paper includes a description of these advanced wires, the finite element model of their heat diffusion properties as compared with the standard wires, and whenever available, a comparison between the minimum quench energy (MQE) calculated by the model and actual MQE measurements on wires.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Sensitivity Analysis of Modal Parameters of a Jacket Offshore Wind Turbine to Operational Conditions

Accurate estimation of offshore wind turbine (OWT) modal parameters has a prominent effect on the design loads, lifetime prediction, and dynamic response of the system. Modal parameters can vary during the operation of OWTs. This paper studies the variation and sensitivity analysis of an OWT’s modal parameters with respect to operational and environmental conditions. Three finite element models of a jacket-supported OWT at the Block Island Wind Farm are created within the OpenSees, SAP2000, and OpenFAST platforms and validated using experimental measurements. The OpenFAST model is used to simulate the modal parameters of the turbine under various wind speed, rotor speed, power, yaw angle, mean sea level, blade pitch angle, and soil spring values. The model-predicted modal parameters of the first fore–aft (FA) and side–side (SS) modes are compared to those identified from experimental measurements. Results from the simulations show that the first FA natural frequency and damping ratio mostly depend on the rotor speed and wind speed, respectively, while yaw angle and mean sea level do not have a visible effect. It is observed that there is about 8% stiffening in the first FA frequency and an aerodynamic damping of 7.5% during the operation of the OWT.

17 WIND ENERGY↗
DOE OSTI2024

Stress Relaxation Cracking in 347H Stainless Steel Arc Welds: Susceptibility Evaluation of Heat-Affected Zone

Stress relaxation cracking (SRC) is considered one of the major failure mechanisms for 347H stainless steel welds at elevated service temperatures or during post weld heat treatment (PWHT), especially within the heat-affected zone (HAZ). This work focuses on the characterization of SRC susceptibility within 347H physically simulated arc welded HAZ at elevated temperatures. A four-step SRC thermomechanical test in combination with finite element modeling (FEM) of the welding and testing processes is developed to establish a susceptibility map for HAZ. The test first runs a thermal cycle with three different peak temperatures (1335, 1275, and 1150 °C) to duplicate representative HAZ subzone microstructures, followed by time-to-failure examination under a variety of pre-stress (260–600 MPa) and pre-strain conditions (0.03–0.19) as a function of reheat temperatures between 750 and 1050 °C. With the aid of FEM, SRC susceptibility maps are generated to identify the threshold stress, plastic strain, and creep strain as a function of test temperature. It was found out that HAZ subzone with a lower peak temperature (1150 °C) appears to be slightly less susceptible to SRC than the other two subzones that experienced higher peak temperatures. Generally, time-to-fracture reduces with increasing initially applied stress and strain for all test temperatures. The pre-stress thresholds decrease from about 500 to 330 MPa as the testing temperature increases from 800 to 1050 °C, while the corresponding initial plastic strain thresholds reduces from 0.15 to 0.06. The SRC susceptibility was also evaluated through the Larson–Miller Parameter (LMP) analysis as a function of plastic strain, initial stress and starting stress upon reaching the testing temperature, respectively. The 1050 °C test with a high pre-applied strain (0.1) exhibits an extremely short time to failure (t = 3 s) that lies outside the general trend in LMP analysis. Additionally, it was identified that a plastic strain above 0.07 is identified to significantly reduce the bulk creep strain tolerance to fracture and therefore increases SRC susceptibility. Hardness measurement and fractography analysis indicated that the strain aging of niobium carbonitrides and other potential phases in conjunction with intergranular precipitates contributes to an increase in microhardness and increased intergranular cracking susceptibility.

14 SOLAR ENERGY↗
DOE OSTI2026

Embedded Ferroelectric Nanoclusters can drive Polarization Reversal in a Non-Ferroelectric Polar Film via the Proximity Effect

Heterogeneous nucleation from defects dominates the electric field required for polarization switching of ferroelectrics. Here, we consider the switching of a nominally non-switchable polar thin film of AlN due to the proximity effect arising from embedded ferroelectric nanoclusters of Al 1-x Sc x N. Using a Landau-Ginzburg-Devonshire thermodynamic approach and finite element modeling, we study the influence of nanocluster shape on polarization switching and domain nucleation emerging in AlN. The ferroelectric nanocluster boundary is modeled as a thin layer transitioning from Al 1-x Sc x N to AlN. We analyze the conditions under which polarization switching in the AlN film occurs at coercive fields significantly lower than its dielectric breakdown field. In the presence of spike-like Al 1-x Sc x N nanoclusters, the proximity effect enables switching of the spontaneous polarization in AlN and significantly reduces the corresponding coercive field. The internal field, which is depolarizing inside the AlN (due to its larger spontaneous polarization) and polarizing within the ferroelectric Al 1-x Sc x N nanoclusters (due to its smaller spontaneous polarization), lowers the potential barrier in the clusters and nucleates nanodomains at the Al 1-x Sc x N-AlN interface, forming localized regions of reversed polarization. Proximity effect can thus provide a pathway towards "thawing" previously "frozen" ferroelectrics through engineered nucleation for memory, actuation and optical technologies.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Substructuring techniques

The substructure function generator program is discussed. Input to this program consists of a definition of a finite element model of a substructure, and specification of the type and number of displacement functions to be generated. Primary output is a substructure data file containing the substructure mass and stiffness matrices expressing kinetic and potential energies as quadratic forms in coefficients of the displacement functions, etc. The substructure synthesis program forms complete system mass, stiffness, and damping matrices, computes system modes and frequencies, and executes transient response calculations. Input to this program consists of the array of substructure data files generated by the function generator program for individual substructures, and data cards defining the position and interconnection of the substructures, damping data, forcing function details, and function control parameters.

Whetstone, W. D.↗
NASA NTRS1971

Response of aerospace structures to reentry aerodynamic excitation

A bibliography on aerodynamic excitation and associated structural response is presented. Very little applicable data under actual reentry conditions was found, but many wind tunnel tests and some in-flight data were. Aerodynamic excitation and proposed space shuttle configurations and reentry trajectories were studied. Attached turbulent boundary layer, separated turbulent boundary layer, and base pressure fluctuations are the region of aerodynamic excitation most applicable to exterior panels of space shuttle-type vehicles; prediction techniques are presented for these environments. Methods for predicting the response of panel structures to acoustic excitation were investigated. A normal mode approach was developed for the low frequency response and a statistical energy approach was utilized for the high frequency response. A finite element model was made of a thermal protective system test panel. Computer programs were used to determine the natural frequencies and mode shapes of the panel and to calculate the response of the panel to a reverberant acoustic field. Power spectral densities of response displacement and acceleration are presented.

Carlin, D., Jr.↗
NASA NTRS1972

Automated procedures for sizing aerospace vehicle structures /SAVES/

Results from a continuing effort to develop automated methods for structural design are described. A system of computer programs presently under development called SAVES is intended to automate the preliminary structural design of a complete aerospace vehicle. Each step in the automated design process of the SAVES system of programs is discussed, with emphasis placed on use of automated routines for generation of finite-element models. The versatility of these routines is demonstrated by structural models generated for a space shuttle orbiter, an advanced technology transport,n hydrogen fueled Mach 3 transport. Illustrative numerical results are presented for the Mach 3 transport wing.

Giles, G. L.↗
NASA NTRS1973

Parametric studies of the wing flutter behavior of a STOL transport.

A computer study was conducted to evaluate the effects of variations in the principal structural parameters on the wing flutter behavior of a four-engine STOL transport configuration having relatively low inplane wing stiffness and heavy engines. The wing structure was represented by a finite-element model which included the coupling between inplane and out-of-plane motion of the wing induced by the offset engine masses. The parameters which were varied were engine mass, pylon stiffness, and the inplane stiffness of the wing. It was found that the value of inplane stiffness for best flutter performance lies substantially below the range encountered in conventional designs. For engine weights in the medium-to-heavy range, the best inplane stiffness provided a dramatic improvement in flutter performance over that for infinite inplane stiffness, while for the lightest engines the improvement was moderate.

Kyser, A. C.↗
NASA NTRS1974

Cyclic-stress analysis of notches for supersonic transport conditions

The feasibility of using the finite element method to account for the effects of cyclic load and temperature on local stresses and strains at a notch was demonstrated. The behavior of a notched titanium panel was studied under variable loads and temperatures representative of flight conditions for the lower wing surface of a Supersonic Transport (SST). The analysis was performed with the use of the BOPACE finite-element computer program which provides capability to determine high temperature and large viscoplastic effects caused by cyclic thermal and mechanical loads. The analysis involves the development of the finite-element model as well as determination of the structural behavior of the notched panel. Results are presented for twelve SST flights comprised of five different load-temperature cycles. The results show the approach is feasible, but material response to cyclic loads, temperatures, and hold times requires improved understanding to allow proper modeling of the material.

Source record↗
NASA NTRS1974

Creep response of the lunar crust in mare regions from an analysis of crater deformation

The settling trends of 318 lunar mare craters are compared with predictions of numerical finite-element models in order to determine the creep response of the upper lunar mare crust. No settling is evident in craters smaller than 5 km in diameter. Settling rates of larger craters increase as function of crater size in a manner suggesting a nonlinear lunar creep response corresponding to the power law epsilon = 8.3 x 10 to the minus 34th sigma squared where epsilon is the strain rate and sigma is the differential stress. However, the observed nonlinearity is probably an apparent nonlinearity resulting from the temperature-induced viscosity decrease with depth due to a lunar crustal temperature gradient of 3 C/km and a creep activation energy of 20 kcal/mole. It is concluded that creep in the lunar medium is essentially Newtonian, and that the effective viscosity of the upper lunar mare is (1.6 plus or minus 0.3) x 10 to the 25th poise.

Kunze, A. W. G.↗
NASA NTRS1975

Structural evaluation of candidate designs for the large space telescope primary mirror

Structural performance analyses were conducted on two candidate designs (Itek and Perkin-Elmer designs) for the large space telescope three-meter mirror. The mirror designs and the finite-element models used in the analyses evaluation are described. The results of the structural analyses for several different types of loading are presented in tabular and graphic forms. Several additional analyses are also reported: the evaluation of a mirror design concept proposed by the Boeing Co., a study of the global effects of local cell plate deflections, and an investigation of the fracture mechanics problems likely to occur with Cervit and ULE. Flexibility matrices were obtained for the Itek and Perkin-Elmer mirrors to be used in active figure control studies. Summary, conclusions, and recommendations are included.

Soosaar, K.↗