THE MEASUREMENT OF RADIATION CONFIGURATION FACTORS WITH PARABOLIC MIRRORS
Measurement of radiation configuration factors with parabolic mirrors for spacecraft temperature control analysis
RADIATIVE HEAT TRANSFER↗
SEARCH · Engineering Papers
Results for “FACTOR ANALYSIS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Three-dimension heat transfer program
An IBM 7094, three dimensional, heat transfer program for satellite application is discussed. The program may be applied to all phases of spacecraft life, from launch to orbital quasi-steady state. Launch phase heating includes inputs by radiation from the hot fairing and free molecule flow heating after nose cone ejection. Orbital heat fluxes are accounted for by direct sunlight, earth-reflected sunlight, and earth-emitted input to the satellite. Internal heat exchange by conduction and radiation is determined, provided the appropriate conductances, radiation view factors, and effective emittances are known. A simplified analysis of an active thermal controlled spacecraft is incorporated into the program. One or more surfaces may contain shutter systems which have optical properties specified as a function of shutter opening. The program evaluates the feasibility of any configuration based upon maintaining an internal component within its tolerable temperature limits. The program employs a matrix inversion subroutine (Gauss Elimination Method) to solve the heat balance equations.
COMPUTER PROGRAM↗
Flight calibration of compensated and uncompensated pitot-static airspeed probes and application of the probes to supersonic cruise vehicles
Static pressure position error calibrations for a compensated and an uncompensated XB-70 nose boom pitot static probe were obtained in flight. The methods (Pacer, acceleration-deceleration, and total temperature) used to obtain the position errors over a Mach number range from 0.5 to 3.0 and an altitude range from 25,000 feet to 70,000 feet are discussed. The error calibrations are compared with the position error determined from wind tunnel tests, theoretical analysis, and a standard NACA pitot static probe. Factors which influence position errors, such as angle of attack, Reynolds number, probe tip geometry, static orifice location, and probe shape, are discussed. Also included are examples showing how the uncertainties caused by position errors can affect the inlet controls and vertical altitude separation of a supersonic transport.
Webb, L. D.↗
Central Atlantic regional ecological test site
The work of the Central Atlantic Regional Ecological Test Site (CARETS) project is discussed. The primary aim of CARETS is to test the hypothesis that data from ERTS-A can be made an integral part of a regional land resources information system, encompassing both inventory of the resource base and monitoring of changes, along with their effects on the quality of the environment. Another objective of the project is to determine scaling factors for developing land use information and regional analysis for regions of any given size.
Alexander, R. H.↗
Ion masking improves resolution in quadrupole mass spectrometers
Mass spectrometers analyze molecular composition by determining mass-to-charge ratio of ion fragments of molecules. Study adds significantly to quantitative understanding of quadrupole mass filter. It includes development of quantitative theory of ion oscillations, computer analysis of ion behavior, and identification of determining factors in peak tail size.
Ierokomos, N.↗
Analysis of a boron-carbide-drum-controlled critical reactor experiment
In order to validate methods and cross sections used in the neutronic design of compact fast-spectrum reactors for generating electric power in space, an analysis of a boron-carbide-drum-controlled critical reactor was made. For this reactor the transport analysis gave generally satisfactory results. The calculated multiplication factor for the most detailed calculation was only 0.7-percent Delta k too high. Calculated reactivity worth of the control drums was $11.61 compared to measurements of $11.58 by the inverse kinetics methods and $11.98 by the inverse counting method. Calculated radial and axial power distributions were in good agreement with experiment.
Mayo, W. T.↗
Analysis and synthesis of a fluid sonic pulse system
A nonlinear sonic system is described that includes a delay line. Short-lived pulses with a high repetition frequency circulate through the system. The analysis was carried out by defining the reflection factor at the load and then dividing the input pulse according to duration into sections of appropriate width. The response was determined for each section, the response to the whole pulse being given by the sum of the responses at the sections. This makes it possible to broach the synthesis of a sonic system that will give an output pulse of the desired form.
Boita, M.↗
Air pollution source identification
The techniques available for source identification are reviewed: remote sensing, injected tracers, and pollutants themselves as tracers. The use of the large number of trace elements in the ambient airborne particulate matter as a practical means of identifying sources is discussed. Trace constituents are determined by sensitive, inexpensive, nondestructive, multielement analytical methods such as instrumental neutron activation and charged particle X-ray fluorescence. The application to a large data set of pairwise correlation, the more advanced pattern recognition-cluster analysis approach with and without training sets, enrichment factors, and pollutant concentration rose displays for each element is described. It is shown that elemental constituents are related to specific source types: earth crustal, automotive, metallurgical, and more specific industries. A field-ready source identification system based on time and wind direction resolved sampling is described.
Fordyce, J. S.↗
Experience gained from computer processing of physical experimental data during the restoration of measured values
The processing stage in which the restored values of the physical parameters are received is described. The following main steps are discussed: estimation of the state of the telemetry data, processing of the calibration data, and determination of the errors in the data; data decommutation and analysis of the structure of measurement cycles for each instrument; decoding, estimates of the reliability of the restored data, and their agreement with the models adopted for the measurement process; and analysis of errors due to deterministic and random factors. A block diagram of the method is presented.
Mamotko, Z. N.↗
Remote sensing and applications
A brief review of application of remote sensing technology is given. The effectiveness of the multispectral band scanner, color analysis of imagery, and resolution are among the factor's discussed. The users' need for repetitive data, rapid data delivery, and developing digital data techniques are also considered.
Stoney, W.↗
The effects of participatory mode and task workload on the detection of dynamic system failures
The ability of operators to detect step changes in the dynamics of control systems is investigated as a joint function of, (1) participatory mode: whether subjects are actively controlling those dynamics or are monitoring an autopilot controlling them, and (2) concurrent task workload. A theoretical analysis of detection in the two modes identifies factors that will favor detection in either mode. Three subjects detected system failures in either an autopilot or manual controlling mode, under single-task conditions and concurrently with a subcritical tracking task. Latency and accuracy of detection were assessed and related through a speed accuracy tradeoff representation. It was concluded that failure detection performance was better during manual control than during autopilot control, and that the extent of this superiority was enhanced as dual-task load increased. Ensemble averaging and multiple regression techniques were then employed to investigate the cues utilized by the subjects in making their detection decisions.
Wickens, C. D.↗
Analytical design of a high performance stability and control augmentation system for a hingeless rotor helicopter
A stability and control augmentation system (SCAS) was designed based on a set of comprehensive performance criteria. Linear optimal control theory was applied to determine appropriate feedback gains for the stability augmentation system (SAS). The helicopter was represented by six-degree-of-freedom rigid body equations of motion and constant factors were used as weightings for state and control variables. The ratio of these factors was employed as a parameter for SAS analysis and values of the feedback gains were selected on this basis to satisfy three of the performance criteria for full and partial state feedback systems. A least squares design method was then applied to determine control augmentation system (CAS) cross feed gains to satisfy the remaining seven performance criteria. The SCAS gains were then evaluated by nine degree-of-freedom equations which include flapping motion and conclusions drawn concerning the necessity of including the pitch/regressing and roll/regressing modes in SCAS analyses.
Miyajima, K.↗
Flight manager and check-airman training
An analysis of industry incidents, accidents, and related human factors research is given. The need to develop more effective resource management training for the flight deck crewmembers is discussed with specific emphasis on flight manager and check-airman training.
Carroll, J. E.↗
Grain size dependence of silicon solar cell parameters
Measurements of the non-uniform diffusion length of the minority carriers near grain boundaries in polycrystalline silicon have been used to develop an analytical model for the calculation of solar cell output as a function of grain size. Experimental results are presented which verify the theoretical analysis. Variation of open circuit voltage and fill factor with grain size is discussed.
Koliwad, K. M.↗
Statistical summaries of fatigue data for design purposes
Two methods are discussed for constructing a design curve on the safe side of fatigue data. Both the tolerance interval and equivalent prediction interval (EPI) concepts provide such a curve while accounting for both the distribution of the estimators in small samples and the data scatter. The EPI is also useful as a mechanism for providing necessary statistics on S-N data for a full reliability analysis which includes uncertainty in all fatigue design factors. Examples of statistical analyses of the general strain life relationship are presented. The tolerance limit and EPI techniques for defining a design curve are demonstrated. Examples usng WASPALOY B and RQC-100 data demonstrate that a reliability model could be constructed by considering the fatigue strength and fatigue ductility coefficients as two independent random variables. A technique given for establishing the fatigue strength for high cycle lives relies on an extrapolation technique and also accounts for "runners." A reliability model or design value can be specified.
Wirsching, P. H.↗
Propagation of sound in highly porous open-cell elastic foams
This work presents both theoretical predictions and experimental measurements of attenuation and progressive phase constants of sound in open-cell, highly porous, elastic polyurethane foams. The foams are available commercially in graded pore sizes for which information about the static flow resistance, thermal time constant, volume porosity, dynamic structure factor, and speed of sound is known. The analysis is specialized to highly porous foams which can be efficient sound absorbers at audio frequencies. Negligible effect of internal wave coupling on attenuation and phase shift for the frequency range 16-6000 Hz was predicted and no experimentally significant effects were observed in the bulk samples studied. The agreement between predictions and measurements in bulk materials is excellent. The analysis is applicable to both the regular and compressed elastic open-cell foams.
Lambert, R. F.↗
Measurement and Modeling of the Optical Scattering Properties of Crop Canopies
The specular reflection process is shown to be a key aspect of radiation transfer by plant canopies. Polarization measurements are demonstrated as the tool for determining the specular and diffuse portions of the canopy radiance. The magnitude of the specular fraction of the reflectance is significant compared to the magnitude of the diffuse fraction. Therefore, it is necessary to consider specularly reflected light in developing and evaluating light-canopy interaction models for wheat canopies. Models which assume leaves are diffuse reflectors correctly predict only the diffuse fraction of the canopy reflectance factor. The specular reflectance model, when coupled with a diffuse leaf model, would predict both the specular and diffuse portions of the reflectance factor. The specular model predicts and the data analysis confirms that the single variable, angle of incidence of specularly reflected sunlight on the leaf, explains much of variation in the polarization data as a function of view-illumination directions.
Vanderbilt, V. C.↗
The X-ray spectrm of the Coma Cluster of galaxies
The HEAO 1 A-2 and OSO 8 observations of the Coma Cluster of galaxies in the 2-60 keV energy band are presented. The spectrum is not well fitted by an isothermal bremsstrahlung model with an Fe line. To model the spectrum more accurately, we have performed fits of polytropic models and find that the gas is well fitted by an equation of state with polytropic index ranging between 1.38 and 1.6. This analysis reduces the total cluster mass by a factor of 3-5 below the optically derived virial mass. Using the best-fitting parameters, the gas is found to be a significant fraction (25 percent) of the total cluster mass. The Fe K-alpha line blend is strongly detected, from which we infer 0.18-0.36 solar abundance in the X-ray emitting gas. The Fe K-beta line blend is also weakly detected. The spectrum is not consistent with the existence of a hard X-ray tail at the flux level reported by Bazzano el al. (1984). In addition, the HEAO I scanning mode data place strong constraints on possible contaminating sources in the region surrounding Coma.
Henriksen, M. J.↗