Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experimental Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Ion-specific effects influencing the dissolution of tricalcium silicate

It has been recently demonstrated that the dissolution kinetics of tricalcium silicate (C{sub 3}S) is driven by the deviation from its solubility equilibrium. In this article, special attention is paid to ions relevant in cement chemistry likely to interact with C{sub 3}S. In order to determine whether specific effects occur at the interface C{sub 3}S–water, particular efforts have been made to model ion activities using Pitzer's model. It has been found that monovalent cations and monovalent anions interact very little with the surface of C{sub 3}S. On the other side, divalent anions like sulfate slow down the dissolution more strongly by modifying the surface charging of C{sub 3}S. Third, aluminate ions covalently bind to surface silicate monomers and inhibit the dissolution in mildly alkaline conditions. The formation and the breaking of these bonds depend on pH and on [Ca{sup 2+}]. Thermodynamic calculations performed using DFT combined with the COSMO-RS solvation method support the experimental findings.

36 MATERIALS SCIENCE↗

Computational methods in solution-based plastics purification

Plastic waste can be recycled into resins with near-virgin properties by solution-based purification processes that selectively dissolve polymers, remove contaminants, or detach printing residues. Here, in this review, we examine computational methods for predicting the behavior governing solution-based plastic purification, motivated by the vast polymer–solvent–contaminant compositional space. We discuss thermodynamic and machine learning methods for predicting polymer–solvent and polymer–contaminant interaction and review physics-based molecular dynamics simulations that resolve molecular-scale phenomena within polymer matrices inaccessible to screening methods. We highlight how these methods have informed experimental design for dissolution-based recycling and solvent-based contaminant removal. Finally, we discuss the prospective role of agentic AI in integrating these computational tools with real-time sorting data to adapt purification conditions to the compositional variability of real post-consumer feedstocks. This review charts a path toward computationally guided solution-based purification workflows that can respond to the complexity inherent in plastic waste streams.

Altamimi, Ali [Univ. of Wisconsin, Madison, WI (Un↗

Study on coalescence dynamics of unequal-sized microbubbles captive on solid substrate

The dynamics of bubble coalescence are of importance for a number of industrial processes, in which the size inequality of the parent bubbles plays a significant role in mass transport, topological change and overall motion. In this study, coalescence of unequal-sized microbubbles captive on a solid substrate was observed from cross-section view using synchrotron high-speed imaging technique and a microfluidic gas generation device. The bridging neck growth and surface wave propagation at the early stage of coalescence were investigated by experimental and numerical methods. The results show that theoretical half-power-law of neck growth rate is still valid when viscous effect is neglected. However, the inertial-capillary time scale is associated with the initial radius of the smaller parent microbubble. Furthermore the surface wave propagation rate on the larger parent microbubble is proportional to the inertial-capillary time scale.

42 ENGINEERING↗

Heat transfer augmentation of natural convection heat sink through notched fin design

A novel notched fin heat sink with a central opening is proposed in the present study to augment the heat transfer performance of the natural convection heat sink under horizontal configuration. Thermal and airflow behavior in the heat sinks were studied using both experimental and numerical methods. The results showed that the performance of the conventional heat sink can be enhanced by optimizing its fin design. The basic heat sink model provided a 17% reduction in thermal resistance when its fin height and fin spacing were doubled, and it was accompanied by a 21% increase in surface area. The heat sink with a notched fin design with a less surface area offered a 13% lower thermal resistance compared to the basic model by entraining more airflow into the interior fin region. Providing a central opening in the notched fin heat sink can further reduce the thermal resistance by about 13%. Further, this study also analyzed the influence of emissivity of the heat sink on natural convection conditions. The findings demonstrated that the heat sink with an emissivity of 0.9 can reduce the thermal resistance by nearly 23% compared to one with an emissivity of 0.15.

42 ENGINEERING↗

Comparative investigations of multi-fidelity modeling on performance of electrostatically-actuated cracked micro-beams

Silicon is a commonly used material for the fabrication of beams for use in micro-electrical-mechanical systems (MEMS). Although silicon is a brittle material, it has been shown to accumulate fatigue damage at the micro-scale. Understanding the effect this has on the overall device performance is critical to the design of reliable devices. Analytical methods for modeling damage provide expedient results but are limited by broad modeling assumptions. Numerical models account for more detailed physical phenomena but can be computationally intensive. In this work, two different crack scenarios are modeled using both analytical techniques and 3D computational simulations. First, the effects of a single surface crack on the static deflection and natural frequency of an electrostatically actuated micro-beam are formulated and compared. Then, a new method for approximating damage associated with realistic distributed crack networks is formulated for use in an analytical model and numerical simulations. A method for utilizing experimentally derived crack statistics to inform the analytical and numerical distributed crack models is developed. Good agreement between the analytical and numerical models is obtained for both crack scenarios. Altogether, these models can be used to effectively simulate a variety of damage and fatigue behaviors in silicon-based MEMS devices.

42 ENGINEERING↗

Radioprotective Effect of Lidocaine on Function and Ultrastructure of Salivary Glands Receiving Fractionated Radiation

Purpose: Radiation-induced xerostomia still represents a common side effect after radiotherapy for head-and-neck malignancies. The aim of the present study was to examine the radioprotective effect of lidocaine hydrochloride during fractionated radiation in an experimental animal model. Methods and Materials: To evaluate the influence of different radiation doses on salivary gland function and the radioprotective effect of lidocaine, rabbits were irradiated with 15, 25, 30, and 35 Gy (equivalent doses in 2-Gy fractions equivalent to 24, 40, 48, and 56 Gy, respectively). Lidocaine hydrochloride (10 and 12 mg/kg) was administered before every radiation fraction in the treatment groups. Salivary gland function was assessed by flow sialometry and sialoscintigraphy, and the morphologic changes were evaluated using transmission electron microscopy. Results: Functional impairment was first observed after 35 Gy and pretreatment with lidocaine improved radiation tolerance of both parotid and submandibular glands. The use of 12 mg/kg lidocaine was superior and displayed significant radioprotection with regard to flow sialometry and sialoscintigraphy. The ultrastructure was largely preserved after pretreatment with both lidocaine doses. Conclusions: Lidocaine represents an effective radioprotective agent and a promising approach for clinical application to avoid radiation-induced functional impairment of salivary glands.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Adsorption mechanism of alkyl hydroxamic acid onto bastnäsite: Fundamental steps toward rational collector design for rare earth elements

Rare earth element (REE) production is limited in part by inefficient strategies for beneficiation. Hydroxamic acid ligands are promising reagents for the selective flotation of bastnäsite [(Ce,La)FCO 3 ], a major REE ore mineral, but the mechanism and energetics of adsorption are not understood, interfering with the design of new, more efficient reagents. In this work, the adsorption of octyl hydroxamic acid onto bastnäsite was calculated using a combination of experimental and computational methods. In-situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy revealed changes in the hydroxamate functional group vibrational frequencies, corresponding to chelation with cerium cations at the bastnäsite surface. The results indicate a monodentate chemisorption mechanism at low surface loading that changes to bidentate chemisorption at higher concentrations. This interpretation is supported by molecular vibrational frequency shifts calculated using density functional theory (DFT), and orientation of the hydrocarbon chain measured by sum frequency generation (SFG) vibrational spectroscopy. The binding enthalpies of octyl hydroxamic acid interacting with La and Ce-bastnäsite surfaces were measured using isothermal titration calorimetry (ITC) revealing a stronger coordinating ability with bastnäsite than with a common gangue mineral, calcite (CaCO 3 ). Because octyl hydroxamate favors monodentate adsorption at low surface coverages, the relative chelating strength of metal ions could be a poor predictor for selectivity under monolayer adsorption conditions. At higher surface loadings, where the bidentate mode of adsorption is active, selectivity is likely to be limited by increased flotation of gangue ores.

58 GEOSCIENCES↗

Channeling analysis in studying ion irradiation damage in materials containing various types of defects

We present that ion channeling is a powerful quantitative technique for studying ion-irradiation induced defect evolution in single crystalline materials. An iterative procedure to determine dechanneling yields has been developed for decades, serving as a major method for analyzing experimental channeling data. The applicability of such procedure is, however, generally limited to the crystalline damage with only point defects and local amorphous domains. For the other cases, such as irradiated metals, the assumption of direct-backscattering free has usually been made. In the present study, Ni, TiAl, MgO, and SrTiO 3 single crystals are selected as four model materials, representing metals, intermetallic alloys, and ceramic compounds with different defect evolution processes under irradiation, to investigate the fidelity of applying dechanneling analysis on various types of defects. The pure dechanneling assumption is shown oversimplified in Ni irradiated with low fluence self-ions and may result in error on the derived damage profile. Moreover, the iterative procedure of dechanneling analysis is shown valid for more general situations than the randomly distributed atoms, including those not exhibiting a peak in channeling spectra. The disappearance of damage peak in channeling spectra is attributed to the combined effects of small (but non-zero) scattering factor, long-range damage effects, and non-ignorable damage level in pristine crystals. Furthermore, the ratio of direct backscattering to dechanneling areas provides information on defect configurations in the materials containing a well-defined damage peak in channeling spectra. Finally, the contribution from dechanneling sources increases from SrTiO 3 , TiAl, to MgO, according to the derived scattering and dechanneling factors.

36 MATERIALS SCIENCE↗

Characterization of supersonic radiation diffusion waves

Supersonic and diffusive radiation flow is an important test problem for the radiative transfer models used in radiation-hydrodynamics computer codes owing to solutions being accessible via analytic and numeric methods. We present experimental results with which we compare these solutions by studying supersonic and diffusive flow in the laboratory. Here, we present results of higher-accuracy experiments than previously possible studying radiation flow through up to 7 high-temperature mean free paths of low-density, chlorine-doped polystyrene foam and silicon dioxide aerogel contained by an Au tube. Measurements of the heat front position and absolute measurements of the x-ray emission arrival at the end of the tube are used to test numerical and analytical models. We find excellent absolute agreement with simulations provided that the opacity and the equation of state are adjusted within expected uncertainties; analytical models provide a good phenomenological match to measurements but are not in quantitative agreement due to their limited scope.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Heat capacity, enthalpy and entropy of ternary bismuth tantalum oxides

Heat capacity and enthalpy increments of ternary bismuth tantalum oxides Bi{sub 4}Ta{sub 2}O{sub 11}, Bi{sub 7}Ta{sub 3}O{sub 18} and Bi{sub 3}TaO{sub 7} were measured by the relaxation time method (2-280 K), DSC (265-353 K) and drop calorimetry (622-1322 K). Temperature dependencies of the molar heat capacity in the form C{sub pm}=445.8+0.005451T-7.489x10{sup 6}/T{sup 2} J K{sup -1} mol{sup -1}, C{sub pm}=699.0+0.05276T-9.956x10{sup 6}/T{sup 2} J K{sup -1} mol{sup -1} and C{sub pm}=251.6+0.06705T-3.237x10{sup 6}/T{sup 2} J K{sup -1} mol{sup -1} for Bi{sub 3}TaO{sub 7}, Bi{sub 4}Ta{sub 2}O{sub 11} and for Bi{sub 7}Ta{sub 3}O{sub 18}, respectively, were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S{sup o}{sub m}(298.15 K)=449.6{+-}2.3 J K{sup -1} mol{sup -1} for Bi{sub 4}Ta{sub 2}O{sub 11}, S{sup o}{sub m}(298.15 K)=743.0{+-}3.8 J K{sup -1} mol{sup -1} for Bi{sub 7}Ta{sub 3}O{sub 18} and S{sup o}{sub m}(298.15 K)=304.3{+-}1.6 J K{sup -1} mol{sup -1} for Bi{sub 3}TaO{sub 7}, were evaluated from the low-temperature heat capacity measurements. -- Graphical Abstract: Temperature dependence of {Delta}{sub ox}C{sub pm} for bismuth tantalum mixed oxides. Display Omitted Research highlights: > Heat capacity, enthalpy and entropy of ternary bismuth tantalum oxides Bi{sub 4}Ta{sub 2}O{sub 11}, Bi{sub 7}Ta{sub 3}O{sub 18} and Bi{sub 3}TaO{sub 7}. > Heat capacity by DSC calorimetry and heat-pulsed calorimetry. > Enthalpy increments by drop calorimetry. > Einstein-Debye model for low-temperature dependence of the heat capacity. > Application of Neumann-Kopp rule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structures and thermoelectric properties of double-filled (Ca{sub x}Ce{sub 1−x})Fe{sub 4}Sb{sub 12} skutterudites

The structures and thermoelectric properties of the double-filled (Ca{sub x}Ce{sub 1−x})Fe{sub 4}Sb{sub 12} series (x=0, 0.25, 0.5, 0.75, and 1) have been studied using a combined experimental and computational methods. Compounds of (Ca{sub x}Ce{sub 1−x})Fe{sub 4}Sb{sub 12} were obtained only for x=0, 0.5, and 1. Composition with x=0.25 was found to be a mixture of x=0 and 0.5 compounds, and composition with x=0.75 was found to be a mixture of x=1 and 0.5 compounds, respectively. Our conclusions on phase formation are supported by density functional theory (DFT) calculations. In Ca{sub 0.5}Ce{sub 0.5}Fe{sub 4}Sb{sub 12,} Ca substitution in the Ce site of CeFe{sub 4}Sb{sub 12} leads to high hole concentrations, resulting in stronger semimetal transport as compared to CeFe{sub 4}Sb{sub 12}. Ca{sub 0.5}Ce{sub 0.5}Fe{sub 4}Sb{sub 12} yields a slightly higher ZT value than that of CeFe{sub 4}Sb{sub 12}, which is attributed to its lower lattice thermal conductivity. Phonon mode calculations adopting a three-particle bending model suggest that thermal conductivity is reduced upon Ca substitution because of an additional vibration mode which involves both Ca and Ce atoms. - Graphical abstract: Detailed structural information to correlate with thermoelectric properties in a series of double-filled (Ca{sub x}Ce{sub 1−x})Fe{sub 4}Sb{sub 12} skutterudite samples were obtained using synchrotron X-ray diffraction and first principle calculations. - Highlights: • Research focus on phase stability of CaCe double-filled p-type skutterudite. • Stable structure forms for an equiatomic occupancy of the voids by Ca and Ce. • Samples feature two-phase mixtures with variations of filling atoms ratio. • Phase stablility is investigated by DFT total energy calculations. • Sample with Equiatomic occupancy of Ca and Ce show higher ZT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solution-processable copper(I) iodide-based inorganic-organic hybrid semiconductors composed of both coordinate and ionic bonds

Three new one-dimensional (1D) All-In-One (AIO) type CuI-based hybrid semiconductors with both dative and ionic bonds between the inorganic and organic components have been successfully designed and synthesized by using the ligands containing both cationic center and coordination available sites. Structural analysis confirms that all compounds share the same formula of Cu 4 I 6 (L) 2 (L = ligand) and are composed of 1D-Cu 4 I 6 2- anionic chains that coordinate to cationic ligands. Additionally, these materials demonstrate high stability towards heat and moisture and excellent solution processability due to their unique bonding nature. They emit low energy light ranging from green to orange color (530-590 nm). The origin and mechanism of their emissions were studied by both experimental and theoretical methods. More importantly, all compounds can be easily fabricated into films by solution process, a desired but rare feature for most of CuI-based hybrids built of extended networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A complex approach to assessing porous structure of structured ceramics obtained by SPS technique

Highlights: • A complex approach to microstructural analysis of nanostructured SPS ceramics was presented. • A bunch of gas, intrusion and microscopic methods were applied for open/closed porosity determination in nanoceramics. • Kinetic TPR analysis for structural changes in nanoceramic was carried out. • 3D pore visualization for nanoceramics was provided via SEM/FIB tomography • Porosity calculations were performed via BET, BJH, t-plot, Washburn equation, FEI Avizo 9.1 software results. - Abstract: Spark plasma sintering (SPS) is a highly prospective technology providing rapid consolidation of nano-disperse compositions into structured ceramics with complex structural organization. Characterizing pore structure of such systems remains a challenge due to different types, size and shape of the pores as well as structural defects occurring in the material, thus requiring special methods to quantify certain porosity type. The paper presents a complex approach to studying structure of SPS hematite-based structured ceramics. The method involves a number of gas, intrusion and electron microscopy probing techniques to characterize open and closed pores in the ceramics bulk. Low temperature nitrogen sorption has been implemented to estimate open micro- and mesoporosity in the size range 0.7–50 nm using BET, BJH and t-plot methods to process experimental data. Additionally, structural peculiarities of consolidated structured ceramics have been studied using temperature-programmed reduction (TPR) with the kinetic analysis of the results being carried out. Volume of macropores sized above 50 nm has been measured with mercury intrusion. Closed pores and structural defects have been quantified with SEM and FIB/SEM tomography. By comparing experimental and estimated results we have shown that addressing all porosity types provides a highly precise structural characterization of the material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Kinetics of hydrogen adsorption on MgH{sub 2}/CNT composite

Highlights: • Hydrogen adsorption comparisons of commercial, milled, and MgH{sub 2} composite. • Hydrogen adsorption capacity and kinetics improves tremendously by CNT embedding. • Unsteady state modeling and simulation of adsorption kinetics. - Abstract: Magnesium hydride (MgH{sub 2})–carbon nanotubes (CNT) composite has been prepared by high-energy ball milling method and their experimental and kinetic hydrogen adsorption studies was assessed. Hydrogen adsorption studies were performed by Sievert’s volumetric apparatus and kinetic evaluation was conducted by surface chemistry and Langmuir–Hinshelwood–Hougen–Watson (LHHW) type mode. Powder X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) were performed. Hydrogen adsorption capacity of commercial MgH{sub 2}, milled MgH{sub 2}, and MgH{sub 2}/CNT composite are found to be 0.04, 0.057, and 0.059 g (H{sub 2})/g (MgH{sub 2}) at 673 K and hydrogen pressure of 4.6 MPa. Addition of 5 wt% of CNTs to MgH{sub 2} proved to be very critical to enhance hydrogen adsorption as well as to improve its kinetics. It was observed that hydrogen adsorption is not in quasi-state equilibrium and is modeled using kinetic rate laws.

36 MATERIALS SCIENCE↗

Controllable preparation of flower-like brookite TiO{sub 2} nanostructures via one-step hydrothermal method

Highlights: • Flower-like brookite TiO{sub 2} structures were prepared by hydrothermal method. • PVP not only acted as a dispersant but also stabilized the layered structure. • The resulted brookite TiO{sub 2} showed high photocatalytic activity under UV irradiation. - Abstract: Flower-like brookite TiO{sub 2} nanostructures were controllable prepared by a one-step hydrothermal method by changing experimental conditions, such as hydrothermal temperature, reaction time and the amount of polyvinylpyrrolidone. The photocatalytic activities of the samples were investigated by degradation of methylene blue (MB) in aqueous solution under UV light irradiation. It was found that the formation of brookite TiO{sub 2} nanostructures with various morphologies could be well controlled by the adjustment of hydrothermal temperature, reaction time and the amount of surfactant, and the morphology of the products changed from spindle-like structures to flower-like structures with the increase of hydrothermal temperature, reaction time and the amount of surfactant. The photocatalytic tests indicate that the flower-like brookite TiO{sub 2} nanostructures shows high photocatalytic activity in degradation of methylene blue (MB) under UV light irradiation. The formation mechanism of flower-like brookite TiO{sub 2} nanostructures was also discussed in detail based on the above investigations.

36 MATERIALS SCIENCE↗

Anomalous behavior of the quasi-one-dimensional quantum material Na 2 OsO 4 at high pressure

Na 2 OsO 4 is an unusual quantum material that, in contrast to the common 5d 2 oxides with spins = 1, owns a magnetically silent ground state with spin = 0 and a band gap at Fermi level attributed to a distortion in the OsO 6 octahedral sites. In this semiconductor, our low-temperature electrical transport measurements indicate an anomaly at 6.3 K with a power-law behavior inclining through the semiconductor-to-metal transition observed at 23 GPa. Even more peculiarly, we discover that before this transition, the material becomes more insulating instead of merely turning into a metal according to the conventional wisdom. Furthermore, to investigate the underlying mechanisms, we applied experimental and theoretical methods to examine the electronic and crystal structures comprehensively, and conclude that the enhanced insulating state at high pressure originates from the enlarged distortion of the OsO 6 . It is such a distortion that widens the band gap and decreases the electron occupancy in Os’s t 2 g orbital through an interplay of the lattice, charge, and orbital in the material, which is responsible for the changes observed in our experiments.

36 MATERIALS SCIENCE↗

Covariances of Evaluated Nuclear Cross Section Data for (232)Th, (180,182,183,184,186)W and (55)Mn

The EMPIRE code system is a versatile package for nuclear model calculations that is often used for nuclear data evaluation. Its capabilities include random sampling of model parameters, which can be utilized to generate a full covariance matrix of all scattering cross sections, including cross-reaction correlations. The EMPIRE system was used to prepare the prior covariance matrices of reaction cross sections of (232)Th, (180,182,183,184,186)W and (55)Mn nuclei for incident neutron energies up to 60 MeV. The obtained modeling prior was fed to the GANDR system, which is a package for a global assessment of nuclear data, based on the Generalized Least-Squares method. By introducing experimental data from the EXFOR database into GANDR, the constrained covariance matrices and cross section adjustment functions were obtained. Applying the correction functions on the cross sections and formatting the covariance matrices, the final evaluations in ENDF-6 format including covariances were derived. In the resonance energy range, separate analyses were performed to determine the resonance parameters with their respective covariances. The data files thus obtained were then subjected to detailed testing and validation. Described evaluations with covariances of (232)Th, (180,182,183,184,186)W and (55)Mn nuclei are included into the ENDF/B-VII.1 library release.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗