Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Energy loss of keV fluorine ions scattered off a missing-row reconstructed Au(110) surface under grazing incidence

A joint experimental and theoretical study of energy loss is presented for 1-to-4-keV fluorine negative ions in grazing scattering on a missing-row reconstructed Au(110) surface. Measurements of energy losses for various azimuthal orientations of the crystal have been performed by means of a time-of-flight method with a pulsed beam. The dependence of the fraction of surviving negative ions on azimuthal angles, was determined. Our energy-loss data are discussed in light of trajectory and stopping-power calculations, where the explicit inclusion of the nonuniform electron density at the surface provides good agreement with the experimental data. The simulation allows us to delineate various trajectory classes that correspond to different contributions in the energy-loss spectra for various azimuthal orientations of the surface.

74 ATOMIC AND MOLECULAR PHYSICS↗

Fragmentation of light nuclei by intermediate energy photons

New data on the fragmentation of carbon nuclei by photons with energies from 800 to 1500 MeV, obtained in the collaboration GRAAL, are presented. These data include the yields of heavier fragments than nucleons. Comparison of new results with literature data, obtained with real and virtual photons in reactions with electrons and relativistic ions (Coulomb dissociation) is done using a general approach in frame of the Weizsäcker-Williams model. Possible reasons for the observed differences between them are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Motors Data Collection Form

Part of a series of 34 energy efficiency checklists, data collection forms, and how-to guides, this Motor Data Collection Form facilitates data entry.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Building Performance Database API (BPD API) v2.1

The Building Performance Database (BPD) is the largest publicly-available source of measured energy performance data for buildings in the United States. It contains information about the building's energy use, location, and physical and operational characteristics. The BPD can be used by building owners, operators, architects and engineers to compare a building's energy efficiency against customized peer groups, identify energy efficiency opportunities, and set energy efficiency targets. It can also be used by energy efficiency program implementers and policymakers to analyze energy efficiency features and trends in the building stock. The BPD compiles data from various data sources, converts it into a standard format, cleanses and quality checks the data, and provides users with access to the data in a way that maintains anonymity for data providers. This software is the database and the Application Programming Interface (API). Users can utilize the BPD's data to develop their own applications using the API. Version 2.1 included a major update for multiple years of data and refactoring of code for faster queries.

Mathew, Paul↗

Report on Wind Turbine Subsystem Reliability - A Survey of Various Databases (Presentation)

Wind industry has been challenged by premature subsystem/component failures. Various reliability data collection efforts have demonstrated their values in supporting wind turbine reliability and availability research & development and industrial activities. However, most information on these data collection efforts are scattered and not in a centralized place. With the objective of getting updated reliability statistics of wind turbines and/or subsystems so as to benefit future wind reliability and availability activities, this report is put together based on a survey of various reliability databases that are accessible directly or indirectly by NREL. For each database, whenever feasible, a brief description summarizing database population, life span, and data collected is given along with its features & status. Then selective results deemed beneficial to the industry and generated based on the database are highlighted. This report concludes with several observations obtained throughout the survey and several reliability data collection opportunities in the future.

17 WIND ENERGY↗

Charge-exchange resonances and restoration of Wigner’s supersymmetry in heavy and superheavy nuclei

Various facets of the question of whether Wigner’s supersymmetry [SU(4) symmetry] may be restored in heavy and superheavy nuclei are analyzed on the basis of a comparison of the results of calculations with experimental data. The energy difference between the giant Gamow–Teller resonance and the analog resonance (the difference of E{sub G} and E{sub A}) according to calculations based on the theory of finite Fermi systems is presented for the case of 33 nuclei for which experimental data are available. The calculated difference ΔE{sub G–A} of E{sub G} and E{sub A} tends to zero in heavier nuclei, showing evidence of the restoration of Wigner’s SU(4) symmetry. Also, the isotopic dependence of the Coulomb energy difference between neighboring isobaric nuclei is analyzed within the SU(4) approach for more than 400 nuclei in the mass-number range of A = 5–244. The restoration of Wigner’s SU(4) symmetry in heavy nuclei is confirmed. It is shown that the restoration of SU(4) symmetry is compatible with the possible existence of the stability island in the region of superheavy nuclei.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Current status of MCNP6 as a simulation tool useful for space and accelerator applications

For the past several years, a major effort has been undertaken at Los Alamos National Laboratory (LANL) to develop the transport code MCNP6, the latest LANL Monte-Carlo transport code representing a merger and improvement of MCNP5 and MCNPX. We emphasize a description of the latest developments of MCNP6 at higher energies to improve its reliability in calculating rare-isotope production, high-energy cumulative particle production, and a gamut of reactions important for space-radiation shielding, cosmic-ray propagation, and accelerator applications. We present several examples of validation and verification of MCNP6 compared to a wide variety of intermediate- and high-energy experimental data on reactions induced by photons, mesons, nucleons, and nuclei at energies from tens of MeV to about 1 TeV/nucleon, and compare to results from other modern simulation tools.

ACCELERATORS↗

Experimentally constrained ( p , γ ) Y 89 and ( n , γ ) Y 89 reaction rates relevant to p -process nucleosynthesis

The nuclear level density and the g-ray strength function have been extracted for 89 Y, using the Oslo Method on 89 Y(p,p'γ) 89 Y coincidence data. The g-ray strength function displays a low-energy enhancement consistent with previous observations in this mass region ( 93-98 Mo). Shell-model calculations give support that the observed enhancement is due to strong, low-energy M1 transitions at high excitation energies. The data were further used as input for calculations of the 88 Sr(p,γ) 89 Y and 88 Y(n,γ) 89 Y cross sections with the TALYS reaction code. Lastly, comparison with cross-section data, where available, as well as with values from the BRUSLIB library, shows a satisfying agreement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron-unbound excited states of N 23

Neutron unbound states in 23 N were populated via proton knockout from an 83.4 MeV/nucleon 24 O beam on a liquid deuterium target. The two-body decay energy displays two peaks at E 1 ~ 100 keV and E 2 ~ 1MeV with respect to the neutron separation energy. The data are consistent with shell model calculations predicting resonances at excitation energies of ~3.6MeV and ~4.5MeV. The selectivity of the reaction implies that these states correspond to the first and second 3/2 - states. Furthermore, the energy of the first state is about 1.3 MeV lower than the first excited 2 + in 24 O. This decrease is largely due to coupling with the πp $-1\atop{3/2}$ hole along with a small reduction of the N = 16 shell gap in 2 3N.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Integrating Energy-Efficient Computing with Computational Research to Accelerate Energy Technology

NREL's computational sciences center hosts the largest high performance computing (HPC) capabilities dedicated to energy research while functioning as a living laboratory for energy-efficient computing. NREL's HPC capabilities support the research needs of the Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE). In ten years of operation, HPC use in EERE-sponsored research has grown by a factor of 30, including work in electricity generation, energy efficiency, transportation, and energy system modeling. This paper analyzes this research portfolio, providing examples of individual use cases. The paper documents NREL's history of operating one of the world's most energy-efficient data centers while examining pathways to reduce economic and environmental impact beyond reduction of Power Usage Efficiency (PUE). This paper concludes by examining the unique opportunities created for accelerating improvements in data center efficiency created by combining an HPC system dedicated to energy research and a research program in energy-efficient computing.

97 MATHEMATICS AND COMPUTING↗

Measurement of cyclotron masses of spin-orbit-split quasi-two-dimensional holes in GaAs(100) narrow quantum wells

The magnetic field dependence of the cyclotron mass of heavy holes in asymmetric GaAs(100) quantum wells is measured by optical detection of resonant microwave absorption for various concentrations of quasi-two-dimensional holes. The effect of spin-orbit splitting on the cyclotron masses of heavy holes is discovered and investigated. The energy spectrum of holes is calculated on the basis of experimental data. The energy range in which spin-plasmon oscillations are observed in hole systems with various concentrations is predicted.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Novel IR Phosphor Based on Sr{sub 3}La{sub 2}(Ge{sub 3}O{sub 9}){sub 2} : Nd{sup 3+},Ho{sup 3+} Germanate

Cyclogermanate Sr{sub 3}La{sub 2}(Ge{sub 3}O{sub 9}){sub 2}, isostructural to silicate Sr{sub 3}Er{sub 2}(Si{sub 3}O{sub 9}){sub 2}, activated by neodymium and holmium is obtained for the first time by the precursor method. Ion Nd{sup 3+} in the structure of Sr{sub 3}La{sub 2}(Ge{sub 3}O{sub 9}){sub 2} is a sensitizer of the infrared luminescence of Ho{sup 3+}. Excitation by radiation with a wavelength of 808 nm leads to a series of emission lines in the luminescence spectra of Sr{sub 3}La{sub 2-x}Nd{sub x}(Ge{sub 3}O{sub 9}){sub 2} : Ho{sup 3+} in the short-wave and middle-IR ranges (1.0–3.4 μm). The highest intensity of lines at 2.1 and 2.7 μm, associated with the {sup 5}I{sub 7} → {sup 5}I{sub 8} and {sup 5}I{sub 6} → {sup 5}I{sub 7} transitions in the Ho{sup 3+} ion, is found for compositions containing traces of holmium. Based on the analysis of the concentration dependences of the luminescence intensity, an optimal composition of the phosphor is determined, which ensures the maximum efficiency of conversion of laser radiation energy. The data obtained are interpreted in the assumption of cross-relaxation energy transfer from Nd{sup 3+} to Ho{sup 3+}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Empirical Model of Puncture Energy for Metals

The purpose of this work is to fit a previously developed empirical equation for puncture energy to simulation data. The conservative puncture energy equation could be used to expedite the process of performing calculations in the development of safety measures, avoiding the need to create complex finite element models for specific puncture scenarios. A total of 108 simulations are developed by varying coupon thickness, coupon material, probe shape, and probe diameter. The simulations are comprised of a low-velocity probe puncturing the coupons, from which the probe kinetic energy change is calculated. The empirical equation is fit to the dimensions, material properties, and energy results using a non-linear least-squares regression method within Python, which determines the two constant parameters for each fit. More statistically significant fit results are achieved by separating the data by probe shape and coupon material.

42 ENGINEERING↗

Studies of acceleration processes in the corona using ion measurements on the solar probe mission

The energy spectra and composition of particles escaping from the Sun provide essential information on mechanisms responsible for their acceleration, and may also be used to characterize the regions where they are accelerated and confined and through which they propagate. The suprathermal energy range, which extends from solar wind energies (approximately 1 KeV) to about 1 MeV/nucleon, is of special interest to studies of nonthermal acceleration processes because a large fraction of particles is likely to be accelerated into this energy range. Data obtained from near earth observations of particles in the suprathermal energy range are reviewed. The necessary capabilities of an a ion composition experiment in the solar probe mission and the required ion measurements are discussed. A possible configuration of an instrument consisting of an electrostatic deflection system, modest post acceleration, and a time of flight versus energy system is described as well as its possible location on the spacecraft.

Gloeckler, G.↗

A fifty channel electrically scanned pressure module

A unique miniature pressure sensor system consisting of an array of fifty integrated sensor pressure transducers with integral electronic logic and switching is described. Solid state processing of the piezoresistive array is combined with hybrid microelectronics to produce a very small, dense (80 cc displacement), high reliability pressure measuring system. Application to high speed data acquisition, energy conservation in wind tunnels and flight test is discussed. Test data are presented typifying system performance.

Mallon, J. R.↗

Differential and Integral Data Evaluation for Titanium: An Application to Criticality Safety

The intent of this work is to highlight the role of differential and integral data evaluation to address issues in connection with criticality safety applications. Demonstration is made by using, as an example, differential data measurements and evaluation, and the benchmark integral experiments for titanium. Energy differential data are measured analyzed and evaluated to produce nuclear data libraries for criticality safety applications. Alternatively, integral experiments are performed at critical facilities, small experimental reactors, and play an important part in the validation of the differential nuclear data. The demonstration provided here for titanium gives its importance to criticality safety. Titanium is an effective neutron absorber that serves as baseline material for chemical separation in high-activity waste solutions in US. Titanium has not been considered for use in nuclear applications such as reactor design and analysis. Rather, it appears as a structural material that may be present in fuel cycle facilities or canisters for transport and disposition of nuclear waste. Criticality safety evaluations of systems in which titanium is present require an understanding of the nuclear data and its uncertainty.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Estimating the National Carbon Abatement Potential of City Policies: A Data- Driven Approach

Cities are increasingly taking actions such as building code enforcement, urban planning, and public transit expansion to reduce emissions of carbon dioxide in their communities and municipal operations. However, many cities lack the quantitative information needed to estimate policy impacts and prioritize city actions in terms of carbon abatement potential and cost effectiveness. This report fills this research gap by providing methodologies to assess the carbon abatement potential of a variety of city actions. The methodologies are applied to an energy use data set of 23,458 cities compiled for the U.S. Department of Energy’s City Energy Profile tool. The analysis estimates the national carbon abatement potential of the most commonly implemented actions in six specific policy areas. The results of this analysis suggest that, in aggregate, cities could reduce nationwide carbon emissions by about 210 million metric tons of carbon dioxide (MMT CO 2 ) per year in a "moderate abatement scenario" by 2035 and 480 MMT CO 2 /year in a "high abatement scenario" by 2035 through these common actions typically within a city’s control in the six policy areas. The aggregate carbon abatement potential of these specific areas equates to a reduction of 3%-7% relative to 2013 U.S. emissions. At the city level, the results suggest the average city could reduce carbon emissions by 7% (moderate) to 19% (high) relative to current city-level emissions. City carbon abatement potential is sensitive to national and state policies that affect the carbon intensity of electricity and transportation. Specifically, the U.S. Clean Power Plan and further renewable energy cost reductions could reduce city carbon emissions overall, helping cities achieve their carbon reduction goals.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Calculation of energy levels, lifetimes and radiative data for La XXIX to Sm XXXIV

Highlights: • Lowest 27 levels for La XXIX to Sm XXXIV are calculated. • Radiative data for E1, E2, M1 and M2 transitions within lowest 27 levels are presented. • Effect of nuclear charge on the transition wavelength of allowed EUV transitions is studied graphically. • Effect of nuclear charge on transition probability of allowed EUV transitions is studied graphically. • Lifetimes for lowest 27 fine structure levels are provided. We present the most comprehensive atomic data for La XXIX to Sm XXXIV with single electron excitation from M-shell to N-shell and N-shell to higher shells. We have presented energy levels, lifetimes and radiative data using Multi-configuration Dirac–Fock (MCDF) method for the lowest 27 states belonging to the configuration 3d{sup 10}4l (l=0,1,2,3), 3d{sup 10}5l (l=0,1,2,3,4), 3d{sup 10}6l (l=0,1,2,3,4) and 3d{sup 9}4s{sup 2}. We have also considered relativistic effects by incorporating quantum electrodynamics (QED) and Breit corrections. We have made comparisons of our presented results with available theoretical as well as experimental results and a good agreement is achieved. Further, we have also reported energy levels by performing distorted wave calculations with fully relativistic flexible atomic code (FAC). The calculations match well with MCDF results. Additionally, we have investigated the effect of nuclear charge on transition wavelength and radiative rates for strong Extreme Ultraviolet (EUV) transitions from n=4→4. We believe that our reported data in this work may be useful in various applications of lanthanide ions related to broad area of research such as applied physics, laser physics and astrophysics etc.

74 ATOMIC AND MOLECULAR PHYSICS↗