Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron Accelerators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Review of recent theories and experiments for improving high-power microwave window breakdown thresholds

Dielectric window breakdown is a serious challenge in high-power microwave (HPM) transmission and radiation. Breakdown at the vacuum/dielectric interface is triggered by multipactor and finally realized by plasma avalanche in the ambient desorbed or evaporated gas layer above the dielectric. Methods of improving breakdown thresholds are key challenges in HPM systems. First, the main theoretical and experimental progress is reviewed. Next, the mechanisms of multipactor suppression for periodic rectangular and triangular surface profiles by dynamic analysis and particle-in-cell simulations are surveyed. Improved HPM breakdown thresholds are demonstrated by proof-of-principle and multigigawatt experiments. The current theories and experiments of using dc magnetic field to resonantly accelerate electrons to suppress multipactor are also synthesized. These methods of periodic profiles and magnetic field may solve the key issues of HPM vacuum dielectric breakdown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microtron MT 25 as a source of neutrons

The objective was to describe Microtron MT25 as a source of neutrons generated by bremsstrahlung induced photonuclear reactions in U and Pb targets. Bremsstrahlung photons were produced by electrons accelerated at energy 21.6 MeV. Spectral fluence of the generated neutrons was calculated with MCNPX code and then experimentally determined at two positions by means of a Bonner spheres spectrometer in which the detector of thermal neutrons was replaced by activation Mn tablets or track detectors CR-39 with a {sup 10}B radiator. The measured neutron spectral fluence and the calculated anisotropy served for the estimation of neutron yield from the targets and for the determination of ambient dose equivalent rate at the place of measurement. Microtron MT25 is intended as one of the sources for testing neutron sensitive devices which will be sent into the space.

43 PARTICLE ACCELERATORS↗

Performance of a hybrid pyroelectric LiNbO{sub 3} and TiO{sub 2} nanotubes X-ray source

Effects of crystal length and temperature on performance and degradation properties of LiNbO{sub 3}/TiO{sub 2} pyroelectric/nanotube X-ray source were studied. Such hybrid LiNbO{sub 3}/TiO{sub 2} X-ray source was fabricated by bonding electrochemically grown TiO{sub 2} nanotubes on −z face of pyroelectric LiNbO{sub 3} crystal. In particular, it was found that maximum accelerated electron energy increased with height for both pure and hybrid LiNbO{sub 3}/TiO{sub 2} system for both heating and cooling cycles. For example, for 2 cm long hybrid structure the resulting maximum energy during heating cycle was 97 keV as compared to 74 keV for 1 cm long structure. The maximum energy for the pure sample without nanotubes increased from 45 keV to 66 keV. Increased endpoint energy of nanotube based X-ray source is attributed to electric field amplification on nanotube tips increasing the efficiency of residual gas ionization, leading to improved charge carrier transmission efficiency. The degradation properties were studied by performing multiple thermal cycles and results revealed that cluster nanotips erode over time. After 20 cycles they become flat as was evidenced from scanning electron microscope analysis.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Few-cycle optical probe-pulse for investigation of relativistic laser-plasma interactions

The development of a few-cycle optical probe-pulse for the investigation of laser-plasma interactions driven by a Ti:sapphire, 30 Terawatt (TW) laser system is described. The probe is seeded by a fraction of the driving laser's energy and is spectrally broadened via self-phase modulation in a hollow core fiber filled with a rare gas, then temporally compressed to a few optical cycles via chirped mirrors. Shadowgrams of the laser-driven plasma wave created in relativistic electron acceleration experiments are presented with few-fs temporal resolution, which is shown to be independent of post-interaction spectral filtering of the probe-beam.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Array of surface-confined glow discharges in atmospheric pressure helium: Modes and dynamics

Array of atmospheric pressure surface discharges confined by a two-dimensional hexagon electrode mesh is studied for its discharge modes and temporal evolution so as to a theoretical underpinning to their growing applications in medicine, aerodynamic control, and environmental remediation. Helium plasma surface-confined by one hexagon-shaped rim electrode is shown to evolve from a Townsend mode to a normal and abnormal glow mode, and its evolution develops from the rim electrodes as six individual microdischarges merging in the middle of the hexagon mesh element. Within one hexagon element, microdischarges remain largely static with the mesh electrode being the instantaneous cathode, but move towards the hexagon center when the electrode is the instantaneous anode. On the entire array electrode surface, plasma ignition is found to beat an unspecific hexagon element and then spreads to ignite surrounding hexagon elements. The spreading of microdischarges is in the form of an expanding circle at a speed of about 3 × 10{sup 4} m/s, and their quenching starts in the location of the initial plasma ignition. Plasma modes influence how input electrical power is used to generate and accelerate electrons and as such the reaction chemistry, whereas plasma dynamics are central to understand and control plasma instabilities. The present study provides an important aspect of plasma physics of the atmospheric surface-confined discharge array and a theoretical underpinning to its future technological innovation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the dispersion relation of the transit time instability in inverted fireballs

Recently discovered inverted fireballs are non-linear plasma phenomena, which are formed in hollow grid anodes with high transparency in an existing background plasma. If a sufficiently large potential is applied, accelerated electrons from the bulk start to oscillate through the grid. Experimental investigations have shown that they produce different types of plasma instabilities. One of those oscillations is a transit time instability which originates from strong electron beams that travel through the inverted fireball. This type of instability is similar to vircator reflex oscillations and produces radio frequency waves. Hence, it is suitable to convert DC signals into signals oscillating in the MHz range. This paper analyses the dispersion relation of the transit time instability for three different plasma regimes. The regimes can be divided into a collision less regime, a regime with high collisionality and one in between those former two. It is demonstrated that the plasma properties of the surrounding background plasma have a strong influence on the behavior of the instability itself.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microwave induced plasma discharge in multi-cell superconducting radio-frequency cavity

A R&D effort for in situ cleaning of 1.5 GHz Superconducting Radio Frequency (SRF) cavities at room temperature using the plasma processing technique has been initiated at Jefferson Lab. This is a step toward the cleaning of cryomodules installed in the Continuous Electron Beam Accelerator Facility (CEBAF). For this purpose, we have developed an understanding of plasma discharge in a 5-cell CEBAF-type SRF cavity having configurations similar to those in the main accelerator. The focus of this study involves the detailed investigations of developing a plasma discharge inside the cavity volume and avoids the breakdown condition in the vicinity of the ceramic RF window. A plasma discharge of the gas mixture Ar–O{sub 2} (90%:10%) can be established inside the cavity volume by the excitation of a resonant 4π/5 TM{sub 010}-mode driven by a klystron. The absence of any external magnetic field for generating the plasma is suitable for cleaning cavities installed in a complex cryomodule assembly. The procedures developed in these experimental investigations can be applied to any complex cavity structure. Details of these experimental measurements and the observations are discussed in the paper.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurements of high energy photons in Z-pinch experiments on primary test stand

High energy photons are measured for the first time in wire-array Z-pinch experiments on the Primary Test Stand (PTS) which delivers a current up to 8 MA with a rise time of 70 ns. A special designed detecting system composed of three types of detectors is used to measure the average energy, intensity, and pulse waveform of high energy photons. Results from Pb-TLD (thermoluminescence dosimeter) detector indicate that the average energy is 480 keV (±15%). Pulse shape of high energy photons is measured by the photodiode detector consisted of scintillator coupled with a photodiode, and it is correlated with soft x-ray power by the same timing signal. Intensity is measured by both TLD and the photodiode detector, showing good accordance with each other, and it is 10{sup 10} cm{sup −2} (±20%) at 2 m in the horizontal direction. Measurement results show that high energy photons are mainly produced in pinch regions due to accelerated electrons. PTS itself also produces high energy photons due to power flow electrons, which is one order smaller in amplitude than those from pinch region.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Engineered band structure for an enhanced performance on quantum dot-sensitized solar cells

A photon-to-current efficiency of 2.93% is received for the Mn-doped CdS (MCdS)-quantum dot sensitized solar cells (QDSSCs) using Mn:ZnO (MZnO) nanowire as photoanode. Hydrothermal synthesized MZnO are spin-coated on fluorine doped tin oxide (FTO) glass with P25 paste to serve as photoanode after calcinations. MCdS was deposited on the MZnO film by the successive ionic layer adsorption and reaction method. The long lived excitation energy state of Mn{sup 2+} is located inside the conduction band in the wide bandgap ZnO and under the conduction band of CdS, which increases the energetic overlap of donor and acceptor states, reducing the “loss-in-potential,” inhibiting charge recombination, and accelerating electron injection. The engineered band structure is well reflected by the electrochemical band detected using cyclic voltammetry. Cell performances are evidenced by current density-voltage (J-V) traces, diffuse reflectance spectra, transient PL spectroscopy, and incident photon to current conversion efficiency characterizations. Further coating of CdSe on MZnO/MCdS electrode expands the light absorption band of the sensitizer, an efficiency of 4.94% is received for QDSSCs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation of a non-equilibrium helium plasma bullet emerging into oxygen at high pressure (250–760 Torr) and interacting with a substrate

A two-dimensional computational study of a plasma bullet emanating from a helium gas jet in oxygen ambient at high pressure (250–760 Torr) was performed, with emphasis on the bullet interaction with a substrate. Power was applied in the form of a trapezoidal +5 kV pulse lasting 150 ns. A neutral gas transport model was employed to predict the concentration distributions of helium and oxygen in the system. These were then used in a plasma dynamics model to investigate the characteristics of the plasma bullet during its propagation and interaction with a substrate. Upon ignition, the discharge first propagated as a surface wave along the inner wall of the containing tube, and then exited the tube with a well-defined ionization front (streamer or plasma bullet). The plasma bullet evolved from a hollow (donut-shaped) feature to one where the maximum of ionization was on axis. The bullet propagated in the gap between the tube exit and the substrate with an average speed of ~2 × 10 5 m/s. Upon encountering a metal substrate, the bullet formed a conductive channel to the substrate. Upon encountering a dielectric substrate, the bullet turned into an ionization wave propagating radially along the substrate surface. For a conductive substrate, the radial species fluxes to the surface peaked on the symmetry axis. For a dielectric substrate, a ring-shaped flux distribution was observed. The “footprint” of plasma-surface interaction increased either by decreasing the gap between tube exit and substrate, decreasing the relative permittivity of an insulating substrate, or decreasing pressure. As the system pressure was lowered from 760 to 250 Torr, the discharge was initiated earlier, and the plasma bullet propagation speed increased. A reverse electric field developed during the late stages of the ramp-down of the pulse, which accelerated electrons forming a brief backward discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Record-level quantum efficiency from a high polarization strained GaAs/GaAsP superlattice photocathode with distributed Bragg reflector

Photocathodes that provide high polarization and high quantum efficiency (QE) can significantly enhance the physics capabilities of electron accelerators. We report record-level QE from a high-polarization strained GaAs/GaAsP superlattice photocathode fabricated with a Distributed Bragg Reflector (DBR). The DBR photocathode technique enhances the absorption of incident laser light thereby enhancing QE, but as literature suggests, it is very challenging to optimize all of the parameters associated with the fabrication of complicated photocathode structures composed of many distinct layers. Past reports of DBR photocathodes describe high polarization but typically QE of only ~ 1%, which is comparable to QE of high polarization photocathodes grown without a DBR structure. As a result, this work describes a new strained GaAs/GaAsP superlattice DBR photocathode exhibiting polarization of 84% and QE of 6.4%.

43 PARTICLE ACCELERATORS↗

Ultra-relativistic double explosions

In this paper, we consider fluid dynamics of relativistic double explosion—when a point explosion with energy E 1 is followed by a second explosion with energy E 2 after time t d (the second explosion could be in a form of a long lasting wind). The primary explosion creates a self-similar relativistic blast wave propagating with Lorentz factor Γ 1 (t). A sufficiently strong second explosion, with total energy E 2 ≥10 -2 E 1 , creates a fast second shock in the external fluid previously shocked by the primary shock. At times longer than the interval between the explosions t d , yet short compared with the time when the second shock catches up the primary shock at ~t d Γ$2\atop{1}$, the structure of the second shock is approximately self-similar. The self-similar structure of the second shock exists for the case of constant external density (in this case Γ 2 ∝t -7/3 ), but not for the wind environment. At early times, the Lorentz factor of the second shock may exceed that of the primary shock and may boost the synchrotron emission of locally accelerated electrons into the Fermi Large Area Telescope range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A spectrometer for ultrashort gamma-ray pulses with photon energies greater than 10 MeV

Herein we present a design for a pixelated scintillator based gamma-ray spectrometer for non-linear inverse Compton scattering experiments. By colliding a laser wakefield accelerated electron beam with a tightly focused, intense laser pulse, gamma-ray photons up to 100 MeV energies and with few femtosecond duration may be produced. To measure the energy spectrum and angular distribution, a 33 × 47 array of cesium-iodide crystals was oriented such that the 47 crystal length axis was parallel to the gamma-ray beam and the 33 crystal length axis was oriented in the vertical direction. Using an iterative deconvolution method similar to the YOGI code, modeling of the scintillator response using GEANT4 and fitting to a quantum Monte Carlo calculated photon spectrum, we are able to extract the gamma ray spectra generated by the inverse Compton interaction.

47 OTHER INSTRUMENTATION↗

Many-body perturbation theory with hybrid density functional theory starting points accelerated by adaptively compressed exchange

We report on the use of the adaptively compressed exchange (ACE) operator to accelerate many-body perturbation theory (MBPT) calculations, including G 0 W 0 and the Bethe–Salpeter equation (BSE), for hybrid density functional theory starting points. We show that by approximating the exact exchange operator with the low-rank ACE operator, substantial computational savings can be achieved with systematically controllable errors in the quasiparticle energies computed with full-frequency G 0 W 0 and the optical absorption spectra and vertical excitation energies computed by solving the BSE within density matrix perturbation theory. Our implementation makes use of the ACE-accelerated electronic Hamiltonian to carry out both G 0 W 0 and BSE without explicitly computing empty states. We show the robustness of the approach and present the computational gains obtained on both the central processing unit and graphics processing unit nodes. In conclusion, our work will facilitate the exploration and evaluation of fine-tuned hybrid starting points aimed at enhancing the accuracy of MBPT calculations without involving computationally demanding self-consistency in Hedin’s equations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of laser-accelerated proton beams from a 0.5 kJ sub-picosecond laser for radiography applications

Laser-accelerated ion beams show promise for many applications, including high-resolution flash imaging of static or dynamic objects in next-generation radiography to probe materials and plasmas in extreme environments and inertial confinement fusion. To scale up ion beam production for radiography applications, we conducted experiments using sub-picosecond lasers up to 0.5 kJ at the OMEGA-EP facility to characterize proton beams from solid targets, primarily CH/CD sub-micron thin films from which ion beams were also used for static and dynamic radiography for the first time. For standalone sub-micron thin CH films, the highest detected proton energy is in the range of 72–97 MeV. Proton beams with highest energy near or above 60 MeV at full laser energy and similar beam profiles are also measured from low-density CD foams and flat CH foil target of micrometer-scale thickness. The ~ 700–800 nm CH/CD foils achieve the highest ion yield among the targets tested. For sub-micron thin films, the laser prepulse can expand the target and lead to complex interactions, which is simulated using coupled hydrodynamic and two-step kinetic models. Simulations suggest the presence of a micrometer-scale preplasma plateau with near-critical density and further indicate that target normal sheath acceleration, electron heating from Relativistic transparency in the preplasma plateau, and background proton reflection from carbon ion front at the rear side contribute to the resulting proton spectrum from these sub-micron thin targets at various stages. These proton beams show strong potential for radiography and for production of secondary sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced quantum efficiency from optical interference in alkali antimonide photocathodes: Modeling and experimental results

We present measurements of enhanced quantum efficiency (QE) in thin film alkali antimonide photocathodes from optical interference in the cathode-substrate multilayer. Modulations in the spectral response are observed over a range of visible wavelengths and are shown to increase the QE by more than a factor of two at specific wavelengths. We present a model describing the QE modulations based on the three step photoemission process incorporating cases of both constant density of states and density functional theory-derived density of states and show that the calculated results are in good agreement with the measurements. Model predictions demonstrate that QE can be enhanced by more than a factor of 5 by optimization of cathode and substrate layer thicknesses. Additionally, these calculations reveal that optical interference can yield higher quantum efficiencies in thin films compared to thick, optically dense films. We model the QE vs excitation wavelength of multiple alkali antimonide compounds at different thicknesses. We then discuss the advantages of this interference effect for electron accelerators.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

VARIABILITY AND SPECTRAL MODELING OF THE HARD X-RAY EMISSION OF GX 339-4 IN A BRIGHT LOW/HARD STATE

We study the high-energy emission of the Galactic black hole candidate GX 339-4 using INTEGRAL/SPI and simultaneous RXTE/PCA data. By the end of 2007 January, when it reached its peak luminosity in hard X-rays, the source was in a bright hard state. The SPectrometer on INTEGRAL (SPI) data from this period show a good signal-to-noise ratio, allowing a detailed study of the spectral energy distribution up to several hundred keV. As a main result, we report on the detection of a variable hard spectral feature ({>=}150 keV) which represents a significant excess with respect to the cutoff power-law shape of the spectrum. The SPI data suggest that the intensity of this feature is positively correlated with the 25-50 keV luminosity of the source and the associated variability timescale is shorter than 7 hr. The simultaneous Proportional Counter Array data, however, show no significant change in the spectral shape, indicating that the source is not undergoing a canonical state transition. We analyzed the broadband spectra in the lights of several physical models, assuming different heating mechanisms and properties of the Comptonizing plasma. For the first time, we performed quantitative model fitting with the new versatile Comptonization code BELM, accounting self-consistently for the presence of a magnetic field. We show that a magnetized medium subject to pure non-thermal electron acceleration provides a framework for a physically consistent interpretation of the observed 4-500 keV emission. Moreover, we find that the spectral variability might be triggered by the variations of only one physical parameter, namely the magnetic field strength. Therefore, it appears that the magnetic field is likely to be a key parameter in the production of the Comptonized hard X-ray emission.

79 ASTRONOMY AND ASTROPHYSICS↗

MAGNETIC AMPLIFICATION BY MAGNETIZED COSMIC RAYS IN SUPERNOVA REMNANT SHOCKS

X-ray observations of synchrotron rims in supernova remnant (SNR) shocks show evidence of efficient electron acceleration and strong magnetic field amplification (a factor of {approx}100 between the upstream and downstream medium). This amplification may be due to plasma instabilities driven by shock-accelerated particles or cosmic rays (CRs), as they propagate ahead of the shocks. One candidate process is the cosmic ray current-driven (CRCD) instability caused by the electric current of 'unmagnetized' CRs (i.e., CRs whose Larmor radii are much larger than the length scale of the CRCD modes) propagating parallel to the upstream magnetic field. Particle-in-cell (PIC) simulations have shown that the back-reaction of the amplified field on CRs would limit the amplification factor of this instability to less than {approx}10 in galactic SNRs (not including the additional field compression at the shock). In this paper, we study the possibility of further amplification driven near shocks by 'magnetized' CRs, whose Larmor radii are smaller than the length scale of the field that was previously amplified by the CRCD instability. We find that additional amplification can occur due to a new instability, driven by the CR current perpendicular to the field, which we term the perpendicular current-driven instability (PCDI). We derive the growth rate of this instability and, using PIC simulations, study its non-linear evolution. We show that the maximum amplification of PCDI is determined by the disruption of CR current, which happens when CR Larmor radii in the amplified field become comparable to the length scale of the instability. We find that, in regions close to the shock, PCDI grows on scales smaller than the scales of the CRCD instability, and, therefore, it results in larger amplification of the field (amplification factor up to {approx}45). One possible observational signature of PCDI is the characteristic dependence of the amplified field on the shock velocity, B {sup 2} {proportional_to} v {sup 2} {sub sh}, which contrasts with the one corresponding to the CRCD instability acting alone, B {sup 2} {proportional_to} v {sup 3} {sub sh}. Our results strengthen the idea of CRs driving a significant part of the magnetic field amplification observed in SNR shocks.

79 ASTRONOMY AND ASTROPHYSICS↗