Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPOSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

XPS Investigation on Changes in UO 2 Speciation following Exposure to Humidity

High purity UO 2 powder samples were subjected to accelerated aging under controlled conditions with relative humidity ranging from 34% to 98%. Characterization of the chemical speciation of the products was accomplished using X-ray photoelectron spectroscopy (XPS). A shift to higher uranium oxidation states was found to be directly correlated to increased relative humidity exposure. In addition, the relative abundance of O 2- , OH - , and H 2 O was found to vary with exposure time. Therefore, it is expected that uranium oxide materials exposed to high relative humidity conditions during processing and storage would display a similar increase in average uranium valence.

36 MATERIALS SCIENCE↗

Determining the oxidation stability of SnSe under atmospheric exposure

Abstract Understanding surface stability becomes critical as 2D materials like SnSe are developed for piezoelectric and optical applications. SnSe thin films deposited by molecular beam epitaxy showed no structural changes after a two-year exposure to atmosphere, as confirmed by X-ray diffraction and Raman spectroscopy. X-ray photoelectron spectroscopy and reflectivity show a stable 3.5 nm surface oxide layer, indicating a self-arresting oxidative process. Resistivity measurements show an electrical response dominated by SnSe post-exposure. This work shows that SnSe films can be used in ambient conditions with minimal risk of long-term degradation, which is critical for the development of piezoelectric or photovoltaic devices. Graphical Abstract

Chin, Jonathan R. (ORCID:0000000273205678)↗

The Speciation of Silver Nanoparticles in Antimicrobial Fabric Before and After Exposure to a Hypochlorite/Detergent Solution

Because of their antibacterial properties, silver nanoparticles are often used in consumer products. To assess environmental and/or human health risks from these nanoparticles, there is a need to identify the chemical transformations that silver nanoparticles undergo in different environments. Thus an antimicrobial sock material containing Ag nanoparticles was examined by X-ray absorption spectroscopy to identify the speciation of Ag. The material was exposed to a hypochlorite/detergent solution and subjected to agitation. An elemental Ag nanopowder was also exposed to the hypochlorite/detergent solution or to a 1 mol L{sup -1} NaCl solution. Results showed that the sock material nanoparticles consisted of elemental Ag. After exposure to the hypochlorite/detergent solution, a significant portion (more than 50%) of the sock nanoparticles were converted, in situ, to AgCl. Results from exposures to elemental Ag nanopowder suggest that an oxidation step is necessary for the elemental Ag nanoparticles to transform into AgCl as there was no evidence of AgCl formation in the presence of chloride alone. As a result, if Ag ions leach from consumer products, any chloride present may quickly scavenge the ions. In addition, the efficacy of Ag, as an antimicrobial agent in fabrics, may be limited, or even negated, after washing in solutions containing oxidizers as AgCl is much less reactive than Ag ion.

60 APPLIED LIFE SCIENCES↗

A Comparison of "Total Dust" and Inhalable Personal Sampling for Beryllium Exposure

In 2009, the American Conference of Governmental Industrial Hygienists (ACGIH) reduced the Beryllium (Be) 8-hr Time Weighted Average Threshold Limit Value (TLV-TWA) from 2.0 μg/m 3 to 0.05 μg/m 3 with an inhalable 'I' designation in accordance with ACGIH's particle size-selective criterion for inhalable mass. Currently, per the Department of Energy (DOE) requirements, the Lawrence Livermore National Laboratory (LLNL) is following the Occupational Health and Safety Administration (OSHA) Permissible Exposure Limit (PEL) of 2.0 μg/m 3 as an 8-hr TWA, which is also the 2005 ACGIH TLV-TWA, and an Action Level (AL) of 0.2 μg/m 3 and sampling is performed using the 37mm (total dust) sampling method. Since DOE is considering adopting the newer 2009 TLV guidelines, the goal of this study was to determine if the current method of sampling using the 37mm (total dust) sampler would produce results that are comparable to what would be measured using the IOM (inhalable) sampler specific to the application of high energy explosive work at LLNL's remote experimental test facility at Site 300. Side-by-side personal sampling using the two samplers was performed over an approximately two-week period during chamber re-entry and cleanup procedures following detonation of an explosive assembly containing Beryllium (Be). The average ratio of personal sampling results for the IOM (inhalable) vs. 37-mm (total dust) sampler was 1.1:1 with a P-value of 0.62, indicating that there was no statistically significant difference in the performance of the two samplers. Therefore, for the type of activity monitored during this study, the 37-mm sampling cassette would be considered a suitable alternative to the IOM sampler for collecting inhalable particulate matter, which is important given the many practical and economic advantages that it presents. However, similar comparison studies would be necessary for this conclusion to be applied to other types of activities, where earlier studies have shown that the IOM sampler tends to collect higher concentrations of Be compared to the 37-mm cassette, which could complicate compliance with what is already an extremely low exposure limit.

99 GENERAL AND MISCELLANEOUS↗

Compilation of Published PM2.5 Emission Rates for Cooking, Candles and Incense for Use in Modeling of Exposures in Residences

recent analysis of health impacts from air pollutant inhalation in homes found that PM2.5 is the most damaging at the population level. Chronic exposure to elevated PM2.5 has the potential to damage human respiratory systems, and may result in premature death. PM2.5 exposures in homes can be mitigated through various approaches including kitchen exhaust ventilation, filtration, indoor pollutant source reduction and designing ventilation systems to reduce the entry of PM2.5 from outdoors. Analysis of the potential benefits and costs of various approaches can be accomplished using computer codes that simulate the key physical processes including emissions, dilution and ventilation. The largest sources of PM2.5 in residences broadly are entry from outdoors and emissions from indoor combustion. The largest indoor sources are tobacco combustion (smoking), cooking and the burning of candles and incense. Data on the magnitude of PM2.5 and other pollutant emissions from these events and processes are required to conduct simulations for analysis. The goal of this study was to produce a database of pollutant emission rates associated with cooking and the burning of candles and incense. The target use of these data is for indoor air quality modeling.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Pollutant exposures from unvented gas cooking burners: A Simulation-based Assessment for Southern California

Residential natural gas cooking burners (NGCBs) can emit substantial quantities of pollutants, and they are typically used without venting range hoods. In this study, LBNL researchers quantified pollutant concentrations and occupant exposures resulting from NGCB use in California homes.The simulation model estimated that—in homes using NGCBs without coincident use of venting range hoods -- 62%, 9%, and 53% of occupants are routinely exposed to NO 2 , CO, and HCHO levels that exceed acute health-based standards and guidelines. NGCB use increased the sample median of the highest simulated 1-hr indoor concentrations by 100, 3,000, and 20 ppb for NO 2 , CO, and HCHO, respectively. The study recommends that reducing pollutant exposures from NGCBs should be a public health priority. Simulation results suggest that regular use of even moderately effective venting range hoods would dramatically reduce the percentage of homes in which concentrations exceed health-based standards.

03 NATURAL GAS↗

Preparation of Aluminum Oxide Films Under Water Exposure – Preliminary Report on 1100 Series Alloys

This report describes laboratory experiments performed to produce oxyhydroxide (oxide) films on aluminum 1100 series alloy substrates at various water/temperature conditions. The aluminum alloys selected in this program are types used on aluminum-clad research reactor fuel, and the water/temperature conditions are selected to produce film structures that would be prototypic to those formed on the fuel as a result of reactor exposure and post-discharge water and/or dry storage exposure. The experimental set-up and results to characterize the oxide morphology, thickness, structure, and chemical composition are reported. The results from this work will be compared to oxide characterizations of fuel cladding alloys that have been exposed to actual reactor and post-discharge service conditions. The aim is to develop a laboratory protocol to produce specimens for further studies for response under drying and radiation conditions. The work in this report is interim results and preliminary information prepared under Task 6, Milestone 6.1 in TTQAP SRNL-RP-2018-00610 as part of the action plan described in Ref. [1]. Additional experimental milestones are in progress and will be reported upon completion.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Preparation of Aluminum Oxide Films Under Water Exposure – Preliminary Report on 1100 Series Alloys

This report describes laboratory experiments performed to produce oxyhydroxide (oxide) films on aluminum 1100 series alloy substrates at various water/temperature conditions. The aluminum alloys selected in this program are types used on aluminum-clad research reactor fuel, and the water/temperature conditions are selected to produce film structures that would be prototypic to those formed on the fuel as a result of reactor exposure and post-discharge water and/or dry storage exposure.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Determination of Wind Exposure Category and Basic Wind Speed for B332 and Other Facilities Located within Superblock

This document assesses of the typical surface terrain for the LLNL Site 200 Campus surrounding B332 in accordance with ASCE 7-16 and demonstrates that wind Exposure Category B can be applied to B332 and the other buildings and structures located within the fenced perimeter of Superblock. When compensating for the Exposure Category B surface terrain surrounding B332 and Superblock, calculations show that the ANS 2.3 WDC-3 Basic Wind Speed for B332 is adjusted from 118 mph to 100 mph and the WDC-2 Basic Wind Speed is adjusted from 115 mph to 98 mph.

42 ENGINEERING↗

Nondestructive Evaluation (NDE) of Cable Moisture Exposure using Frequency Domain Reflectometry (FDR)

This Pacific Northwest National Laboratory (PNNL) milestone report assesses the capability of frequency domain reflectometry (FDR) to determine electrical cable submergence using PNNL’s Accelerated and Real-Time Environmental Nodal Assessment (ARENA) cable/motor test bed. This work includes a review of relevant literature as well as experimental tests. Nuclear power facilities have experienced various electrical cable failures related to water exposure. The current industry response involves actions to de-water cable vaults, manholes, and other cable locations. These efforts require considerable expenditure of resources, which makes it desirable for the industry to have information on cable condition and history regarding their submergence and water exposure (Mantey 2012). Two tests that are gaining favor within the nuclear industry are time-domain reflectometry (TDR) and FDR. These are low-voltage nondestructive tests that can be applied at a cable end. Testing from the cable end is important because local inspection along the cable length is very difficult due to cables being routed within trays, conduits, underground, and through walls. Both TDR and FDR techniques have been shown to locate cable insulation damage due to thermal, radiation, and mechanical damage. FDR measurements are also more sensitive than TDR to temperature changes, low-bend radius bends, and cable contact with various materials, including conductive materials like steel and water. This work evaluates the feasibility to extend FDR testing to characterizing whether an electrical cable is submerged or not and where it may be submerged using PNNL’s ARENA cable/motor test bed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Atmospheric Cold Plasma Jet Coating and Surface Treatment for Improved Adhesive Bonding Performance of Dissimilar Material Joints Subject to Harsh Environmental Exposure

The program goal was the development and demonstration of a novel material coating system using an innovative atmospheric cold microwave plasma jet to enable surface functionalization for corrosion protection, wear resistance and improved bonding strength. The technical approach was directed towards proof-of-concept demonstration of advanced point-of-manufacturing material bonding to improve adhesive joint performance subject to harsh environmental exposure. The assembled team, consisting of the researchers at the University of Illinois, end-users at General Motors and small business manufacturer Starfire Industries, successfully demonstrated a single, cost-effective, high-volume production process that meets the requirements of multi-material combinations relevant to the energy-intensive transportation industry (e.g. Al-steel, Mg-steel, Al-Mg and Al-CFRP joints for body-in-white structures) while eliminating offline pretreatment for Al and Mg alloy substrates that are energy intensive, have chemical waste disposal issues, and add cost. Technical demonstration of dissimilar material joining while maintaining bonding strength and cohesion after long-duration environmental exposure was accomplished for all materials of interest. This novel approach has broad applicability for manufacturing in automotive, aerospace, marine, railcar, and specialty consumer goods, etc.

36 MATERIALS SCIENCE↗

Measurement and Reporting Guidelines for Solar Mirror Aging Tests Using Xenon Arc Lamp Exposure (XALE)

This technical report provides a guideline for accelerated aging tests on solar reflectors. Solar reflectors must have a high durability, with goal lifespans reaching 30 years. To test and develop state-of-the-art solar reflectors, relevant durability tests must be conducted. Existing guidelines for materials testing include isothermal testing, humidity testing, corrosion, etc., but many tests do not specify to include solar irradiance or address its relevance to solar reflector durability. The guideline focuses on test design and reporting guidelines for using Xenon Arc Lamp Exposure (XALE). The XALE environmental chambers can subject samples to a combination of relevant environmental factors including concentrated solar irradiance, heat, humidity, and weathering cycles. The guideline is meant to provide information on developing relevant test conditions, exposure times, reflectance characterization procedures, and data reporting.

14 SOLAR ENERGY↗

Quantifying the Impact of Excluding the Submersion Exposure Route for Existing Superfund Radionuclide Screening Level Calculator Soil and Tap Water Models

The U.S. Environmental Protection Agency (EPA) provides initial data screening guidelines for radionuclide-contaminated Superfund sites using preliminary remediation goals (PRGs) and dose compliance concentrations (DCCs). PRGs and DCCs are target concentration values based on acceptable excess lifetime cancer risk and annual dose limits, respectively. They are calculated for various environmental media that may be encountered by residential and worker land uses. PRGs and DCCs typically consist of multiple exposure routes. One of these routes is submersion, which is exposure to a gaseous or particulate radionuclide that is suspended in air. Currently, submersion is only included in air calculations. This study focused on determining whether factoring submersion into total PRG/DCC calculations for soil and tap water created a significant difference in the target concentrations. New equations for individual submersion PRGs/DCCs for each land use of interest for soil and tap water were developed. A wind-driven particulate emission factor and Andelman’s constant were used to model the amount of soil and vapor in the air from soil and household use of tap water, respectively. The submersion PRG/DCC was then included in the total PRG/DCC for each radionuclide, followed by a percent difference comparison of the old and new totals to quantify the impact of the change. For total soil PRGs/DCCs, with and without submersion, the difference was less than 1 percent; however, many of the tap water radionuclides analyzed – including multiple radon and polonium isotopes – showed as high as a 200 percent difference.This technical memorandum (TM) presents recommendations for updates to current EPA guidelines for initial data screens of radionuclide contaminated tap water.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High Exposure Facility Technical Description

The High Exposure Facility is a collimated high-level gamma irradiator that is located in the basement of the 318 building. It was custom developed by PNNL back in 1982 to meet the needs for high range radiological instrument calibrations and dosimeter irradiations. At the time no commercially available product existed that could create exposure rates up to 20,000 R/h. This document is intended to pass on the design criteria that was employed to create this unique facility, while maintaining compliance with ANSI N543-1974, "General Safety Standard for Installations Using Non-Medical X-Ray and Sealed Gamma-Ray Sources, Energies up to 10 MeV."

07 ISOTOPE AND RADIATION SOURCES↗

Effect of in utero and lactational exposure to antiretroviral therapy on the gut microbial composition and metabolic function in aged rat offspring

Despite the highly effective impact of antiretroviral therapy (ART) in reducing mother-to-child transmission of human immunodeficiency virus (HIV), there are concerns of long-term impacts of ART on the health of the offspring. The implications of perinatal exposure to antiviral drugs on the gut bacterial population and metabolic function in the offspring is unclear but may influence health outcomes given the various reported effects of the microbiome in human health. This study aims to gain insight into the potential effect ofin uteroand lactational exposure to ART on gut microbiota populations and short‐chain fatty acids (SCFAs) production in aged rat offspring. Pregnant rats were administered a combination of antiretroviral drugs (abacavir/dolutegravir/lamivudine) at two different dose levels during gestation and throughout lactation, and the fecal bacterial abundance and SCFA levels of the offspring were analyzed when they reached 12 months of age. Our results showed dose-dependent and sex-based differences in fecal microbial abundance at various taxonomic levels. Specifically, we found a decline inFirmicutesin males, and an increase inActinobacteriaamong males and females. Furthermore, a sex-specific distribution reorganization ofLactobacillus,Bifidobacterium, andAkkermansiawas identified. No significant difference in the concentration of prominent SCFAs and IgA levels were identified. These findings provide preliminary information indicating the need to evaluate perinatal effects of ART more comprehensively on the gut bacterial and metabolic function in future studies, and their potential role in offspring health outcomes.

Research & Experimental Medicine↗

Sex-Dependent Effects of the Histone Deacetylase Inhibitor, Sodium Valproate, on Reversal Learning After Developmental Arsenic Exposure

Here, several studies have demonstrated that exposure to arsenic in drinking water adversely affects brain development and cognitive function in adulthood. While the mechanism by which arsenic induces adverse neurological outcomes remains elusive, studies suggest a link between reduced levels of histone acetylation and impaired performance on a variety of behavioral tasks following arsenic exposure.

59 BASIC BIOLOGICAL SCIENCES↗

The effect of simultaneous exposure on the attention selection and integration of segments and lexical tones by Urdu-Cantonese bilingual speakers

In the perceptual learning of lexical tones, an automatic and robust attention-to-phonology system enables native tonal listeners to adapt to acoustically non-optimal speech, such as phonetic conflicts in daily communications. Previous tone research reveals that non-native listeners who do not linguistically employ lexical tones in their mother tongue may find it challenging to attend to the tonal dimension or integrate it with the segmental features. However, it is unknown whether the attentional interference initially caused by a maternal attentional system would continue influencing the non-optimal tone perception for simultaneous bilingual teenagers. From an endpoint in the age of language acquisition, we investigate whether the tone-specific attention mechanism developed by the Urdu-Cantonese simultaneous bilinguals is automatic enough to assist them in adapting to a phonetically-conflicting environment. Three groups of teenagers engaged in a four-condition ABX task: Urdu-Cantonese simultaneous bilinguals, Cantonese native listeners, and Urdu-speaking, late learners of Cantonese. The results showed that although the simultaneous bilinguals could phonologically process Cantonese tones in a Cantonese-like way under a conflict-free listening condition, they still failed in adapting to the phonetic conflicts, especially the segment-induced ones. It thus demonstrated that the simultaneous exposure and years of regular education in Hong Kong local schools still could not automatically guarantee simultaneous bilingual processing of Cantonese tones. In interpreting the findings, it hypothesized that, except for simultaneous exposure, the development of a tone-specific attention mechanism is also likely to be L1-inhibitory, tone experience-driven, and language-specific for simultaneous bilinguals.

Ning, Jinghong↗