Constrained γ Z interference corrections to parity-violating electron scattering
Not Available
Hall, N. L.↗
SEARCH · Engineering Papers
Results for “ELECTRONICS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Measurement of electrons from semileptonic heavy-flavor hadron decays in p p collisions at s = 2.76 TeV
We measured the p T -differential production cross section of electrons from semileptonic decays of heavy-flavor hadrons at midrapidity in proton-proton collisions and at √s=2.76 TeV in the transverse momentum range 0.5 T <12 GeV/c with the ALICE detector at the LHC. Our analysis was performed using minimum bias events and events triggered by the electromagnetic calorimeter. Predictions from perturbative QCD calculations agree with the data within the theoretical and experimental uncertainties.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
High-contrast laser acceleration of relativistic electrons in solid cone-wire targets
Optimization of electron coupling into small solid angles is of extreme importance to applications, such as Fast Ignition, that require maximum electron energy deposition within a small volume. To optimize this coupling, we use the ultra-high-contrast Trident laser, which remains below intensity of 10 11 W/cm 2 until < 0.1 ns before the main pulse, while still attaining high-energy, 75 J, and peak intensity of 5 x 10 19 W/cm 2 . Using a cone-wire target, we find that the coupling into the 40 μm diameter wire is increased by a factor of 2.7x over the low-contrast Titan laser at similar peak intensity. Full-scale simulations are used to model the laser interaction and quantitatively reproduce the experimental results. These show that increase in coupling is due to both a closer interaction, as well as the reduction of laser filamentation and self-focusing.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Density-functional calculations of transport properties in the nondegenerate limit and the role of electron-electron scattering
We compute electrical and thermal conductivities of hydrogen plasmas in the non-degenerate regime using Kohn-Sham Density Functional Theory (DFT) and an application of the Kubo- Greenwood response formula, and demonstrate that for thermal conductivity, the mean-field treatment of the electron-electron (e-e) interaction therein is insufficient to reproduce the weak-coupling limit obtained by plasma kinetic theories. An explicit e-e scattering correction to the DFT is posited by appealing to Matthiessen's Rule and the results of our computations of conductivities with the quantum Lenard-Balescu (QLB) equation. Further motivation of our correction is provided by an argument arising from the Zubarev quantum kinetic theory approach. Significant emphasis is placed on our efforts to produce properly converged results for plasma transport using Kohn-Sham DFT, so that an accurate assessment of the importance and efficacy of our e-e scattering corrections to the thermal conductivity can be made.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Two-Dimensional Electron Gases at LaAlO 3 /SrTiO 3 Interfaces: Orbital Symmetry and Hierarchy Engineered by Crystal Orientation
Recent findings show the emergence of two-dimensional electron gases (2DEGs) at LaAlO 3 /SrTiO 3 interfaces along different orientations; yet details on band reconstructions have remained so far unknown. In this study, via x-ray linear dichroism spectroscopy, we demonstrate that crystal symmetry imposes distinctive 2DEG orbital hierarchies on (001)-and (110)-oriented quantum wells, allowing selective occupancy of states of different symmetry. Such orientational tuning expands the possibilities for electronic engineering of 2DEGs and opens up enticing opportunities to understand the link between orbital symmetry and complex correlated states at LaAlO 3 /SrTiO 3 quantum wells.
36 MATERIALS SCIENCE↗
Demonstration of Single-Crystal Self-Seeded Two-Color X-Ray Free-Electron Lasers
A scheme for generating two simultaneous hard-x-ray free-electron laser pulses with a controllable difference in photon energy is described and then demonstrated using the self-seeding setup at the Linac Coherent Light Source (LCLS). The scheme takes advantage of the existing LCLS equipment, which allows two independent rotations of the self-seeding diamond crystal. The two degrees of freedom are used to select two nearby crystal reflections, causing two wavelengths to be present in the forward transmitted seeding x-ray pulse. The free-electron laser system must support amplification at both desired wavelengths.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Dynamic Pattern Formation in Electron-Beam-Induced Etching [Emergent formation of dynamic topographic patterns in electron beam induced etching]
Here, we report highly ordered topographic patterns that form on the surface of diamond, span multiple length scales, and have a symmetry controlled by the precursor gas species used in electron-beam-induced etching (EBIE). The pattern formation dynamics reveals an etch rate anisotropy and an electron energy transfer pathway that is overlooked by existing EBIE models. Therefore, we, modify established theory such that it explains our results and remains universally applicable to EBIE. Furthermore, the patterns can be exploited in controlled wetting, optical structuring, and other emerging applications that require nano- and microscale surface texturing of a wide band-gap material.
36 MATERIALS SCIENCE↗
Mott Electrons in an Artificial Graphenelike Crystal of Rare-Earth Nickelate S.
Deterministic control over the periodic geometrical arrangement of the constituent atoms is the backbone of the material properties, which, along with the interactions, define the electronic and magnetic ground state. Following this notion, a bilayer of a prototypical rare-earth nickelate, NdNiO3, combined with a dielectric spacer, LaAlO3, has been layered along the pseudocubic [111] direction. The resulting artificial graphenelike Mott crystal with magnetic 3d electrons has antiferromagnetic correlations. In addition, a combination of resonant X-ray linear dichroism measurements and ab initio calculations reveal the presence of an ordered orbital pattern, which is unattainable in either bulk nickelates or nickelate based heterostructures grown along the [001] direction. These findings highlight another promising venue towards designing new quantum many-body states by virtue of geometrical engineering.
Middey, Srimanta↗
Predictive Control over Charge Density in the Two-Dimensional Electron Gas at the Polar-Nonpolar NdTiO 3 / SrTiO 3 Interface
Through systematic control of the Nd concentration, we show that the carrier density of the twodimensional electron gas (2DEG) in SrTiO3=NdTiO3=SrTiO3 ð001Þ can be modulated over a wide range. We also demonstrate that the NdTiO3 in heterojunctions without a SrTiO3 cap is degraded by oxygen absorption from air, resulting in the immobilization of donor electrons that could otherwise contribute to the 2DEG. This system is, thus, an ideal model to understand and control the insulator-to-metal transition in a 2DEG based on both environmental conditions and film-growth processing parameters.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Azimuthal Anisotropy of Heavy-Flavor Decay Electrons in p -Pb Collisions at s N N = 5.02 TeV
Not Available
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Constraints on Light Dark Matter Particles Interacting with Electrons from DAMIC at SNOLAB
We report direct-detection constraints on light dark matter particles interacting with electrons. The results are based on a method that exploits the extremely low levels of leakage current of the DAMIC detector at SNOLAB of 2–6×10-22 A cm^-2. We evaluate the charge distribution of pixels that collect < 10 e- for contributions beyond the leakage current that may be attributed to dark matter interactions. Constraints are placed on so-far unexplored parameter space for dark matter masses between 0.6 and 100 MeV c^-2. We also present new constraints on hidden-photon dark matter with masses in the range 1.2–30 eV c^-2.
Dark Matter, DAMIC, SNOLAB↗
Smart Readout of Nondestructive Image Sensors with Single Photon-Electron Sensitivity
Image sensors with nondestructive charge readout provide single-photon or single-electron sensitivity, but at the cost of long readout times. We present a smart readout technique to allow the use of these sensors in visible light and other applications that require faster readout times. The method optimizes the readout noise and time by changing the number of times pixels are read out either statically, by defining an arbitrary number of regions of interest in the array, or dynamically, depending on the charge or energy of interest in the pixel. This technique is tested in a Skipper CCD showing that it is possible to obtain deep subelectron noise, and therefore, high resolution of quantized charge, while dynamically changing the readout noise of the sensor. These faster, low noise readout techniques show that the skipper CCD is a competitive technology even where other technologies such as electron multiplier charge coupled devices, silicon photo multipliers, etc. are currently used. This technique could allow skipper CCDs to benefit new astronomical instruments, quantum imaging, exoplanet search and study, and quantum metrology.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Electron Modulational Instability in the Strong Turbulent Regime for an Electron Beam Propagating in a Background Plasma
We study collective processes for an electron beam propagating through a background plasma using simulations and analytical theory. A new regime where the instability of a Langmuir wave packet can grow locally much faster than ion frequency is clearly identified. The key feature of this new regime is an electron modulational instability that rapidly creates a local Langmuir wave packet, which in its turn produces local charge separation and strong ion density perturbations because of the action of the ponderomotive force, such that the beam-plasma wave interaction stops being resonant. Three evolution stages of the process and observed periodic burst features are discussed. In conclusion, different physical regimes in the plasma and beam parameter space are demonstrated for the first time.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Hole-induced electronic and optical transitions in L a 1 - x S r x Fe O 3 epitaxial thin films
We have investigated the electronic and optical properties of epitaxial La 1-x Sr x FeO 3 for 0 ≤ x ≤ 1 prepared by molecular-beam epitaxy. Core-level and valence-band x-ray photoemission features monotonically shift to lower binding energy with increasing x, indicating downward movement of the Fermi level toward the valence-band maximum. Combining valence-band photoemission and O K -edge x-ray absorption data, we map the evolution of the occupied and unoccupied bands and observe a narrowing of the gap, along with a transfer of state density from just below to just above the Fermi level as a result of hole doping. In-plane transport measurements confirm that the material becomes a p -type semiconductor at lower doping levels and exhibits a conversion from semiconducting to metallic behavior at x = 1. As a result, low-energy optical transitions revealed by spectroscopic ellipsometry are explained based on insight from theoretical densities of states and first-principles calculations of optical absorption spectra.
36 MATERIALS SCIENCE↗
Structure, electronic and magnetic characterization, and calculated electronic structures of two oxyhalide hexagonal perovskites
Herein we report the crystal structures, initial magnetic and charge transport characterization, and calculated electronic structures of the hexagonal oxyhalide perovskites, Ba 7 Ru 4 O 15 Cl 2 and Ba 7 Ru 4 O 15 Br 2 . The experimental information is obtained through the study of single crystals. Face-sharing Ru O 6 octahedra form Ru 2 O 9 dimers in a layered triangular geometry in these materials; minor amounts of off-magnetic-site structural disorder are present in our crystals. Both are magnetically isotropic, with 2.5 μB/mol-Ru, Curie-Weiss theta –185 K, and 2.9 μB/mol-Ru, Curie-Weiss theta –168 K, respectively. Broad features in the magnetic susceptibility and heat capacity associated with magnetic ordering (at 35 and 37 K, respectively) are observed. The charge transport band gaps are 0.03 eV for the oxychloride and 0.006 eV for the oxybromide. There is no gap at the Fermi level for either of these compounds in density-functional theory electronic structure calculations.
36 MATERIALS SCIENCE↗
Investigation of nanoparticulate silicon as printed layers using scanning electron microscopy, transmission electron microscopy, X-ray absorption spectroscopy and X-ray photoelectron spectroscopy
The presence of native oxide on the surface of silicon nanoparticles is known to inhibit charge transport on the surfaces. Scanning electron microscopy (SEM) studies reveal that the particles in the printed silicon network have a wide range of sizes and shapes. High-resolution transmission electron microscopy reveals that the particle surfaces have mainly the (111)- and (100)-oriented planes which stabilizes against further oxidation of the particles. X-ray absorption spectroscopy (XANES) and X-ray photoelectron spectroscopy (XPS) measurements at the O 1 s -edge have been utilized to study the oxidation and local atomic structure of printed layers of silicon nanoparticles which were milled for different times. XANES results reveal the presence of the +4 (SiO 2 ) oxidation state which tends towards the +2 (SiO) state for higher milling times. Si 2 p XPS results indicate that the surfaces of the silicon nanoparticles in the printed layers are only partially oxidized and that all three sub-oxide, +1 (Si 2 O), +2 (SiO) and +3 (Si 2 O 3 ), states are present. The analysis of the change in the sub-oxide peaks of the silicon nanoparticles shows the dominance of the +4 state only for lower milling times.
36 MATERIALS SCIENCE↗
Modeling and Simulation of Power-Electronic Inverters in Analog Electronic Circuit Simulators
This paper demonstrates how equivalent-circuit representations of grid-following power-electronic inverters can be realized within a SPICE-based development environment using common circuit components and VerilogA code. This facilitates computationally lean simulations of inverter networks leveraging the strengths of SPICE in large-scale simulations. We validate the approach with time-domain simulations for a modified version of the IEEE standard 118-bus system modeled in Virtuoso (a SPICE-based solver). Simulation results are compared-focusing on accuracy and computation speed-with results from a commonly used power-electronics simulation package. We note a significant decrease in simulation time with comparable signal resolution when simulating the network in SPICE.
Billmeyer, Ryan↗
Modeling and Validation of Offset Cancellation for Hybrid Photonic-Electronic Transimpedance Amplifier Using All-Electronic Circuits
Hybrid photonic-electronic circuits involving crossdomain feedback signals are difficult to validate and troubleshoot. This paper describes an approach to model and validate an offset-cancellation loop for a hybrid transimpedance amplifier (TIA) using all-electronic circuits. An equivalent electrical model is developed for the tunable interferometer attenuators used for offset trimming, and it includes test features to extract the system performance. The stability analysis of the system shows 75 ◦ of phase margin and 102 dB of gain margin. Measurement results demonstrate good agreement with analysis and successful TIA offset cancellation.
Marchant, Jared↗