Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMAGNETIC PULSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Radiation Reaction Effects in Ultrahigh Irradiance Laser Pulse Interactions with Multiple Electrons

When ultrahigh irradiance laser pulses interact with high energy electrons, the emission of radiation from these electrons can significantly affect the motion of the electrons themselves (radiation reaction). Since the spatial grid resolution necessary to self-consistently simulate high intensity laser interactions with electrons via particle-in-cell methods is prohibitive, in this paper we describe a particle-particle code to simulate such interactions. We directly solve the interaction between the electrons numerically allowing an accurate description of the dynamics. We examine the collective effects of the simplest case of two electrons with equal energies of 1 GeV, but with initial spatial offsets along the laser propagation direction undergoing strong radiation reaction effects. We find that for a 30 fs laser pulse of intensity 2x10{sup 22} W/cm{sup 2} that both electrons lose 96% of their kinetic energy in less than 10 microns and that the electron in front receives a large kick from the radiation emitted by the electron in back. This makes possible a high power gamma ray source.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Doppler frequency up conversion of electromagnetic waves in a slotline on an optically excited silicon substrate

The Doppler frequency up conversion of microwaves in a slotline on an optically excited silicon substrate was experimentally observed. An array of 24 optical fibers with different lengths was used to effectively tilt the wave front of a 532 nm neodymium-doped yttrium aluminum garnet laser beam with a pulse duration of 33 ps. The tilted laser beam produced electron-hole surface plasma whose boundary moved at a relativistic velocity of about c/3.4 (c is the speed of light) along the slotline. The experiments showed that microwaves reflected at the moving boundary of the plasma in the slotline are converted to millimeter waves with a frequency up conversion ratio of 3.82.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic Structure of an XUV Photogenerated Solid-Density Aluminum Plasma

By use of high intensity XUV radiation from the FLASH free-electron laser at DESY, we have created highly excited exotic states of matter in solid-density aluminum samples. The XUV intensity is sufficiently high to excite an inner-shell electron from a large fraction of the atoms in the focal region. We show that soft-x-ray emission spectroscopy measurements reveal the electronic temperature and density of this highly excited system immediately after the excitation pulse, with detailed calculations of the electronic structure, based on finite-temperature density functional theory, in good agreement with the experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal conductivity as a metric for the crystalline quality of SrTiO{sub 3} epitaxial layers

Measurements of thermal conductivity {Lambda} by time-domain thermoreflectance in the temperature range 100<T<300 K are used to characterize the crystalline quality of epitaxial layers of a prototypical oxide, SrTiO{sub 3}. Twenty samples from five institutions using two growth techniques, molecular beam epitaxy and pulsed laser deposition (PLD), were analyzed. Optimized growth conditions produce layers with {Lambda} comparable to bulk single crystals. Many PLD layers, particularly those that use ceramics as the target material, show surprisingly low {Lambda}. For homoepitaxial layers, the decrease in {Lambda} created by point defects correlates well with the expansion of the lattice parameter in the direction normal to the surface.

36 MATERIALS SCIENCE↗

Growth and properties of epitaxial GdN

Epitaxial gadolinium nitride films with well-oriented crystallites of up to 30 nm have been grown on yttria-stabilized zirconia substrates using a plasma-assisted pulsed laser deposition technique. We observe that the epitaxial GdN growth proceeds on top of a gadolinium oxide buffer layer that forms via reaction between deposited Gd and mobile oxygen from the substrate. Hall effect measurements show the films are electron doped to degeneracy, with carrier concentrations of 4x10{sup 20} cm{sup -3}. Magnetic measurements establish a T{sub C} of 70 K with a coercive field that can be tuned from 200 Oe to as low as 10 Oe.

36 MATERIALS SCIENCE↗

Electron energy distributions in a magnetized inductively coupled plasma

Optimizing and controlling electron energy distributions (EEDs) is a continuing goal in plasma materials processing as EEDs determine the rate coefficients for electron impact processes. There are many strategies to customize EEDs in low pressure inductively coupled plasmas (ICPs), for example, pulsing and choice of frequency, to produce the desired plasma properties. Recent experiments have shown that EEDs in low pressure ICPs can be manipulated through the use of static magnetic fields of sufficient magnitudes to magnetize the electrons and confine them to the electromagnetic skin depth. The EED is then a function of the local magnetic field as opposed to having non-local properties in the absence of the magnetic field. In this paper, EEDs in a magnetized inductively coupled plasma (mICP) sustained in Ar are discussed with results from a two-dimensional plasma hydrodynamics model. Results are compared with experimental measurements. We found that the character of the EED transitions from non-local to local with application of the static magnetic field. The reduction in cross-field mobility increases local electron heating in the skin depth and decreases the transport of these hot electrons to larger radii. The tail of the EED is therefore enhanced in the skin depth and depressed at large radii. Plasmas densities are non-monotonic with increasing pressure with the external magnetic field due to transitions between local and non-local kinetics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tailoring light-induced charge transfer and intersystem crossing in FeCO using time-dependent spin–orbit configuration interaction

Real-time (RT) electronic structure methods provide a natural framework for describing light–matter interactions in arbitrary time-dependent electromagnetic fields (EMF). Optically induced excited state transitions are of particular interest, which require tuned EMF to drive population transfer to and from the specific state(s) of interest. Intersystem crossing, or spin-flip, may be driven through shaped EMF or laser pulses. These transitions can result in long-lived “spin-trapped” excited states, which are especially useful for materials requiring charge separation or protracted excited state lifetimes. Time-dependent configuration interaction (TDCI) is unique among RT methods in that it may be implemented in a basis of eigenstates, allowing for rapid propagation of the time-dependent Schrödinger equation. The recent spin–orbit TDCI (TD-SOCI) enables a real-time description of spin-flip dynamics in an arbitrary EMF and, therefore, provides an ideal framework for rational pulse design. The present study explores the mechanism of multiple spin-flip pathways for a model transition metal complex, FeCO, using shaped pulses designed to drive controlled intersystem crossing and charge transfer. These results show that extremely tunable excited state dynamics can be achieved by considering the dipole transition matrix elements between the states of interest.

Chemistry↗

Cerium-doped scintillating fused-silica fibers

In this work, we report on a set of measurements made on (scintillating) cerium-doped fused-silica fibers using high-energy particle beams. These fibers were uniformly embedded in a copper absorber in order to utilize electromagnetic showers as a source of charged particles for generating signals. This new type of cerium-doped fiber potentially offers myriad new applications in calorimeters in high-energy physics, tracking systems, and beam monitoring detectors for future applications. The light yield, pulse shape, attenuation length, and light propagation speeds are given and discussed. Possible future applications are also explored.

47 OTHER INSTRUMENTATION↗

Processing and Test Result of 650 MHz 50 kW CW Prototype Couplers for PIP-II Project

For PIP-II project Fermilab is developing 650 MHz couplers to deliver up to 50 kW CW RF power to the superconducting low-beta (LB650) and high-beta (HB650) cavities. To meet project requirements two different designs of the couplers were proposed, one is conventional design with copper plated stainless steel walls. In second design (EM-shielded) a copper screen is used to shield stainless steel wall from electromagnetic field. For prototyping we built two couplers of each type and tested them at 50kW with full reflection at different reflection phases. In each test the assembly of two couplers were processed with DC bias up to +5 kV, starting with short pulses and ramping power up to 100 kW. Final run for 2 hours in CW mode at 50 kW to reach equilibrium temperature regime and qualify couplers. One pair of couplers was also processed without DC bias. Finally, all four couplers demonstrated full requirements and were qualified. Based on test results the conventional coupler with some modification was chosen as a baseline design. Modified version of coupler is now ordered for prototype of HB650 cryomodule. In paper we will discuss details of coupler processing and results

43 PARTICLE ACCELERATORS↗

Two-phase air-water stratified flow measurement using ultrasonic techniques

In this paper, a time resolved ultrasound system was developed for investigating two-phase air-water stratified flow. The hardware of the system includes a pulsed wave transducer, a pulser/receiver, and a digital oscilloscope. The time domain cross correlation method is used to calculate the velocity profile along ultrasonic beam. The system is able to provide velocities with spatial resolution of around 1mm and the temporal resolution of 200μs. Experiments were carried out on single phase water flow and two-phase air-water stratified flow. For single phase water flow, the flow rates from ultrasound system were compared with those from electromagnetic flow (EM) meter, which showed good agreement. Then, the experiments were conducted on two-phase air-water stratified flow and the results were given. Compared with liquid height measurement from conductance probe, it indicated that the measured velocities were explainable.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental investigations of fast-proton production in a picosecond laser plasma

Results of experimental investigations of fast-proton production in a laser plasma are presented for the case where the intensity of laser radiation at the targets is 2 x 10{sup 18} W/cm{sup 2}. Three processes of fast-proton acceleration in laser plasma are investigated: (1) the acceleration of protons from the front surface toward the laser pulse, (ii) the acceleration of protons from the front surface of the target toward its interior, and (iii) the acceleration of protons from the rear foil surface in the outward direction. The activation procedure and CR-39 tracker detectors featuring a set of various-thickness aluminum filters were used to record fast protons. It turned out that the proton-acceleration process is the most efficient in the case of proton acceleration from the rear foil surface in the outward direction. Experimental results revealed that about N{sub p} = 10{sup 7} protons of energy in the region E{sub p} > 1.9 MeV that are accelerated from the target surface toward a laser ray, N{sub p} = 4x 10{sup 7} protons of energy in the region E{sub p} > 1.9 MeV that are accelerated fromthe front surface of the target toward its interior, and N{sub p} = 4x10{sup 8} protons of energy in the region E{sub p} > 1.9 MeV that are accelerated from the rear foil surface in the outward direction are generated at a laser-radiation intensity of 2 x 10{sup 18} W/cm{sup 2} at the surface of aluminum, copper, and titanium targets. Experimental investigations aimed at optimizing the process of proton acceleration from the rear surface of aluminum foils were performed by varying the foil thickness over the range between 1 and 100 {mu}m. The results of these experiments showed that there is an optimum foil thickness of 10 {mu}m, in which case protons of maximum energy 5 MeV are generated.

74 ATOMIC AND MOLECULAR PHYSICS↗

Control of Electron Localization in Deuterium Molecular Ions using an Attosecond Pulse Train and a Many-Cycle Infrared Pulse

We demonstrate an experimental control of electron localization in deuterium molecular ions created and dissociated by the combined action of an attosecond pulse train and a many-cycle infrared (IR) pulse. The attosecond pulse train is synthesized using both even and odd high order harmonics of the driving IR frequency so that it can strobe the IR field once per IR cycle. An asymmetric ejection of the deuterium ions oscillates with the full IR period when the APT-IR time-delay is scanned. The observed control is due to the creation of a coherent superposition of 1s {sigma}{sub g} and 2p {sigma}{sub u} states via interference between one-photon and two-photon dissociation channels.

74 ATOMIC AND MOLECULAR PHYSICS↗

Planar repetitively pulsed microwave-pumped CO{sub 2} laser

A planar repetitively pulsed microwave-pumped CO{sub 2} laser with discharge channel lengths of 250 and 470 mm is experimentally investigated. An average laser power of 60 W at a wavelength of 10.6 {mu}m is attained. A peak power of 1300 W is reached in the repetitively pulsed regime. The dependences of the shape and energy of CO{sub 2} laser pulse on the introduced power, working gas mixture composition and pressure, and pump-pulse repetition rate and width are analysed. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Investigation of the dependence of the coherent dynamics of a bismuth lattice on the crystal excitation level

Fully symmetric coherent phonons in bismuth have been investigated in a wide range of pumppulse energies by the pump-probe method using femtosecond laser pulses. It has been shown that in the linear regime, which is implemented only for low pump intensities, the coherent amplitude is proportional to the pump intensity, whereas the relaxation rate of the coherent state and its frequency remain unchanged. In the nonlinear regime, which can be divided into superlinear and sublinear regions, the relaxation rate of a photoinduced lattice state can be approximated by a two-component response, where only one component depends strongly on the pump intensity. The nature of the coherence of the phonon subsystem, which is created by an ultrashort laser pulse, is discussed on the basis of the analysis of the data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of a finline antenna for current drive in TST-2

A novel “finline” antenna was designed to excite lower-hybrid waves (LHWs) for plasma current drive at 2.45 GHz in the TST-2 spherical tokamak. A periodic fin array acts as a transmission line for electromagnetic surface waves. Cold tests confirmed propagation of the electromagnetic surface wave on the fin array which was dominantly Transverse Magnetic (TM). Unlike the conventional waveguide array “grill” antenna, the finline antenna requires only two ports to feed all the elements, and calculations show that there is little reflection regardless of the plasma conditions in front of the antenna. Characteristics of the microwave transmission on the fin array were investigated using a three-dimensional full-wave simulation and the fin geometry was tuned to achieve the desired refractive index. Coupling to LHWs under typical TST-2 scrape-off layer conditions was confirmed by the simulation. Finally, to demonstrate LHW excitation, the finline antenna was energized in the presence of a plasma generated by another 200 MHz LH antenna. The x-ray radiation showed strong enhancement during the finline antenna pulse which indicated successful generation of fast electrons by LHWs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Light by light diffraction in vacuum

We show that a laser beam can be diffracted by a more concentrated light pulse due to quantum vacuum effects. We compute analytically the intensity pattern in a realistic experimental configuration, and discuss how it can be used to measure the parameters describing photon-photon scattering in vacuum. In particular, we show that the quantum electrodynamics prediction can be detected in a single-shot experiment at future 100-PW lasers such as ELI or HIPER. On the other hand, if carried out at one of the present high-power facilities, such as OMEGA EP, this proposal can lead either to the discovery of nonstandard physics or to substantial improvement in the current limits by PVLAS collaboration on the photon-photon cross section at optical wavelengths. This example of manipulation of light by light is simpler to realize and more sensitive than existing, alternative proposals, and can also be used to test Born-Infeld theory or to search for axionlike or minicharged particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

FIREX Project and Effects of Self-generated Electric and Magnetic Fields on Electron Driven Fast Ignition

The fast ignition is a new scheme in laser fusion, in which higher energy gain is expected with smaller laser pulse energy. The cone target has been introduced for realizing higher coupling efficiency. At ILE, Osaka University, the laser with 4 beams and the total output of 10kJ/ps: LFEX has been built and we have started the integrated experiments. The experiments showed that the coupling efficiency is degraded because of the laser pre-pulse. Namely, the main pulse is absorbed in a long scale pre-plasma produced by the pre-pulse and hot electron energy is higher than that for a clean pulse. Furthermore, the distance between the hot electron source and the core plasma is long. So, we are exploring how to overcome the pre-pulse effects on the cone target. The next series of experiments is planned for this fall. In these experiments, the LFEX pre-pulse level will be reduced and advanced targets for mitigating the pre-pulse effects will be introduced.In this paper, it is proposed that a thin foil cover the laser entrance of a cone to mitigate the pre-plasma and a double cone reduce loss of high energy electrons from the side wall of the cone. The simulations indicate that higher coupling efficiency is expected for the double cone target with a thin foil on the laser entrance. Namely, the pre-pulse will be absorbed by the foil and the electro-magnetic fields generated on the surface of the inner cone will confine high energy electrons. The goal of the next series of experiments will be high coupling efficiency to heat a compressed plasma to temperatures higher than 2 keV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experiments to Quantify the Shielding Efficacy of Materials to be Implemented for Portable Shielding Enclosures that Adequately Mitigate EMI from Lighting Attachment Events

Mitigating electric and magnetic fields induced by lightning strike events is critical for the security and longevity of electrical components. Electromagnetic interference originating from a lightning strike is categorized into the low to medium frequency ranges, commonly referred to as the “magnetic coupling” regime. This low-frequency characteristic brings about the problem of shielding magnetic flux lines. Such shielding can be accomplished with highly conductive materials via the generation of eddy currents or by diverting the flux lines using materials with a large relative permeability. The shielding effectiveness of materials with varying thicknesses and geometry are tested using a pulse forming network having comparable characteristics to a scaled lighting strike. A four-stage Marx generator with a peak current of ~33 kA and a risetime of 1.4 μs is used as the pulse forming network to emulate the scaled electric and magnetic fields. The data collected from these experiments provide information and techniques that can be implemented into the design of a portable, deployable shielding enclosure.

61 RADIATION PROTECTION AND DOSIMETRY↗