SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Data are concurrently recorded on disk by one minicomputer and accessed by another, using format of memory blocks, buffering algorithm, and time-sequence addressing. Buffering algorithm works at data rates up to 68,000 words per second; modifications up rate to 160,000 words per second.
A low Bond number simulation technique was used to establish the stability limits of cylindrical and conical floating liquid columns under conditions of isorotation, equal counter rotation, rotation of one end only, and parallel axis offset. The conditions for resonance in cylindrical liquid columns perturbed by axial, sinusoidal vibration of one end face are also reported. All tests were carried out under isothermal conditions with water and silicone fluids of various viscosities. A technique for the quantitative measurement of stream velocity within a floating, isothermal, liquid column confined between rotatable disks was developed. In the measurement, small, light scattering particles were used as streamline markers in common arrangement, but the capability of the measurement was extended by use of stereopair photography system to provide quantitative data. Results of velocity measurements made under a few selected conditions, which established the precision and accuracy of the technique, are given. The general qualitative features of the isothermal flow patterns under various conditions of end face rotation resulting from both still photography and motion pictures are presented.
Several nickel-base aircraft turbine disk superalloys were evaluated at 650 C for resistance to fatigue crack initiation and propagation under cyclic and cyclic/dwell conditions. Controlled strain low cycle fatigue (LCF) and controlled load crack propagation tests were performed and results utilized to provide a direct comparison among the alloys. Tests were performed on selected alloys to evaluate the effects of hold times, mean stresses, stress-dwell cycle types, inert environment, and contractor test methods. At the lower total strain ranges of interest, the alloys exhibited generally increasing initiation life with increasing tensile strength for both cyclic (0.33 Hz) and cyclic/dwell (900-sec hold per cycle) conditions. Rank order of the alloys by LCF initiation life changed substantially at higher strain ranges, approaching the rank order expected from monotonic tensile ductilities. The effect of the 900 sec (15 min) hold time fatigue life varied significantly from alloy to alloy. Generally, the higher-strength, finer-grained alloys exhibited more significant reductions in fatigue life due to the dwell. The effects of mean strain were found to be negligible and the effects of mean stress were pronounced. At high strain ranges the mean stress was near zero and did not contribute to reduction in life. At low strain ranges, however, mean stresses were large and significant reductions in LCF lives occurred.
Experiments were conducted on a rotating disk in water using dye to observe the formation of small vortices in the boundary layer due to the inflexional nature of the boundary layer profiles in the radial and near radial directions. Such vortices have also been detected near the leading edge of swept wings and on the windward side of fuselages at angles of attack using sublimation techniques. In the present investigation, color motion pictures at 300 frames per second were taken and the vortex spacing, angles of inclination of the vortex axes and critical Reynolds numbers were determined from these films. Secondary instabilities were also observed and analyzed.
The stability of three dimensional rotating disk flow and the effects of Coriolis forces and streamline curvature were investigated. It was shown that this analysis gives better growth rates than Orr-Sommerfeld equation. Results support the numerical prediction that the number of stationary vortices varies directly with the Reynolds number.
The CONVRT, program which runs on a DEC PDP 11/70 computer, reads data files on disk in the SPU-Universal format and reformats the data to JSC Universal and output on tape.
It is pointed out that the line of sight to 3C 273 is unique because of the possibility of obtaining both radio and optical absorption line measurements. This information may make it possible to understand in detail the structure of the interstellar medium along the line of sight. To take advantage of this possibility, high-resolution optical spectra were obtained of 3C 273. The observations were made using the echelle spectrograph at the Cassegrain focus of the 4 m telescope at the Cerro Tololo Inter-American Observatory in 1980 January. Both Na D and Ca K lines were obtained on the same plate. In the visual lines, the galactic disk absorption shows a main component at 20 km/sec with a trailing wing in the negative velocities.
The stability of three-dimensional rotating disk flow is investigated, including the effects of Coriolis forces and streamline curvature. The numerical results show that the critical Reynolds number for establishment of stationary vortex flow is 287. These vortices spiral outward at an angle of about 11.2 deg, and transition to turbulence occurs when their total amplification is about e to the 11th. New experimental results are also reported on the spatial growth rates of the stationary vortices. It is shown that the analysis gives growth rates that compare much better with the experimental results than do results obtained using the Orr-Sommerfeld equation. The experimental results tend to support the numerical prediction that the number of stationary vortices varies directly with the Reynolds number. The calculations also indicate the existence of weakly unstable propagating (type II) modes at low Reynolds numbers (Critical Reynolds Number being approximately equal to 49).
Vertically integrated, steady state convective models of accretion disks have been constructed to explore the mechanism of instability in dwarf novae. The models and observations of dwarf novae suggest a picture in which transferred matter piles up in an optically thin torus. The torus eventually becomes optically thick, and the resulting convective structure is thermally unstable. Matter then flows inward, and the sudden conversion of gravitational potential energy to radiation is identified as the dwarf nova outburst. At sufficiently high mass accretion rates, the inflow is continuous.
Method given for locating and deallocating defective sectors or tracks in Winchester-disk system partitioned into two regions, one for each of two operating systems (OS). First is real-time (on-line) OS, second is diagnostic (off-line) OS.
Far-infrared maps and multifrequency photometry are presented for M51 and its companion galaxy NGC 5195. Dust reradiates about half the starlight of the M51 + NGC 5195 system to produce the observed far-infrared (80-200 microns) luminosity of 3 x 10 to the 10th solar luminosities. Observed with 49-arcsec resolution and covering 37 arcmin-squared, the maps show that roughly 70% of this luminosity is produced by the 5 arcmin (approximately 15 kpc) wide far-infrared disk of M51. Comparable luminosities emitted from the central regions (diameters = 49 arcsec or 2.3 kpc) of M51 and NGC 5195 contribute the remaining 30% (approximately 1 x 10 to the 10th solar luminosities). The photometry reveals a difference in energetics at the galactic scale; dust producing the central luminosity of NGC 5195 classified as Ip-Ep, Irr II or SBa(r) is much less abundant and considerably warmer than the approximately 20 K dust producing the central luminosity of M51 (Sc I). Far-infrared properties are given for several galactic scale complexes of star formation in M51. Relationships are discussed for selected maps of optical starlight and emissions from these components of M51's interstellar medium: dust grains, CO molecules, hydrogen atoms, electrons, and H II regions.
The MHD equilibrium of thin, rotating plasma disks is considered. An axisymmetric steady state is assumed. A corotation lag is included, as is a nonzero toroidal field with Bphi varies as rBr. Rigorous expressions are obtained for a characteristic Alfven Mach number and temperature, both of which involve vertical averages. If there is strict corotation, the temperature always diverges at large radii. If there is a corotation lag, the temperature need not diverge, and the magnetodisk solutions can extend to arbitrarily large radii. With weak additional assumptions, it is shown that M sub A is less than 2 exp 1/2 for a mainly poloidal field and M sub A is less than unity for a mainly toroidal field. For the Jovian magnetodisk, M sub A = 0.8 from Voyager 1 inbound data, and the observation of a temperature nearly constant or slowly decreasing with r from 20 R sub J to 80 R sub J on the outbound pass implies a corotation lag there.
This paper presents a method utilizing the numerical plasma simulation particle-in-cell technique for studying electron accelerating probe characteristics. A probe configuration other than the commonly used plane, cylindrical, or spherical case will be studied; the probe configuration used is that of a disk. Cylindrical geometry is used in the simulation model. One of the advantages of a numerical simulation is the ease with which the details of the system can be examined. Therefore, in addition to the current-voltage characteristics of the static probe, other results are presented such as the time evolution of the plasma properties and studies of the sheath region surrounding the probe.
Small scale surface features of the moons Deimos and Phobos were studied using star tracker observations made by the Mariner 9 and Viking orbiters. The whole-disk brightness/solar phase angle phase curves were developed out to a phase angle of 125 deg. An analysis was undertaken according to Lumme-Bowell theory to obtain accurate phase integrals zero-phase geometric albedos, and Bond albedos. The microstructural and particulate surface properties of the two moons were found to be very similar, as were the whole-body densities and the microphysical makeup, thereby suggesting a common origin. However, the presence of streamers on Deimos and the relatively smooth surfaces of both moons indicates a long-term influence of Mars producing surface morphologies different from what would occur with asteroids.
The scalloped outermost edge of the Galaxy may be driven by a Kelvin-Helmholtz interface instability if the disk and halo components of the Galaxy at large galactocentric distances do not corotate. The range of unstable wavelengths is found to be 10-23 kpc, in good agreement with the observed wavelength, 19 kpc.
The Riemann disks are the two-dimensional analogs of the Riemann S-type ellipsoids. They form a simple yet rich family of galactic bar models. A method is developed to find their normal modes to arbitrary order, and the stability analysis is carried out for all modes with order not greater than 5.
The gravitational potential of bodies possessing axial symmetry can be expressed as a power series in distance, with the Legendre polynomials as coefficients. Such series, however, converge so slowly in the neighborhood of thin, uniform disks and rings that too many series terms must be summed in order to obtain an accurate field measure. A gravitational potential expression is presently obtained in closed form, in terms of complete elliptic integrals.
The transient thermal stress problem in a hollow cylinder or a disk containing a radial crack is considered. It is assumed that the cylinder is reinforced on its inner boundary by a membrane which has thermoelastic constants different than those of the base material. The transient temperature, thermal stresses and the crack tip stress intensity factors are calculated in a cylinder which is subjected to a sudden change of temperature on the inside surface. The results are obtained for various dimensionless parameters and material constants. The special cases of the crack terminating at the cylinder-membrane interface and of the broken membrane are separately considered and some examples are given.