Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Differential Experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Trans-crustal structural control of CO 2 -rich extensional magmatic systems revealed at Mount Erebus Antarctica

Erebus volcano, Antarctica, with its persistent phonolite lava lake, is a classic example of an evolved, CO 2 -rich rift volcano. Seismic studies provide limited images of the magmatic system. Here we show using magnetotelluric data that a steep, melt-related conduit of low electrical resistivity originating in the upper mantle undergoes pronounced lateral re-orientation in the deep crust before reaching shallower magmatic storage and the summit lava lake. The lateral turn represents a structural fault-valve controlling episodic flow of magma and CO 2 vapour, which replenish and heat the high level phonolite differentiation zone. This magmatic valve lies within an inferred, east-west structural trend forming part of an accommodation zone across the southern termination of the Terror Rift, providing a dilatant magma pathway. Unlike H 2 O-rich subduction arc volcanoes, CO 2 -dominated Erebus geophysically shows continuous magmatic structure to shallow crustal depths of < 1 km, as the melt does not experience decompression-related volatile supersaturation and viscous stalling.

58 GEOSCIENCES↗
DOE OSTI2026

Compilation and utilization of a sorghum transcriptome compendium for gene regulatory network analysis and crop trait engineering

Sorghum bicolor (Sorghum) is a drought and heat tolerant C4 grass crop used to produce grain, forage, biofuels, and other bioproducts. Genetic improvement of sorghum hybrid crops is aided by a large and diverse germplasm, sorghum's diploid inbreeding genetics, and a relatively small genome that has facilitated genomic research. Over the past 20 years, the sorghum research community characterized the cytogenetic and recombinant landscapes of sorghum's 10 chromosomes, sequenced and annotated the sorghum genome, and used that information to identify genes/alleles that modulate flowering time, plant height, seed shattering, and other important traits. More recently, >1000 RNA-seq transcriptome profiles were collected from 15 sorghum genotypes to help understand the genetic basis of variation in growth and development of sorghum stems, tillers, roots, and leaves, and the regulation of biosynthetic pathways that produce epicuticular wax, dhurrin, and RFOs, compounds that contribute to sorghum's resilience. Transcriptome studies were designed to identify differentially expressed genes that are co-expressed during development or in response to a treatment to enable construction of gene regulatory networks. Co-expression and network analysis identified transcription factors and their cognate binding sites in target gene promoters and signaling pathways that modulate gene regulatory networks providing gene editing targets for further trait optimization. RNA-seq data from >20 experiments targeting sorghum organs, tissues, cell types, developmental stages, and responses to environmental conditions (i.e., diel, day-length, shading, water-deficit, temperature) has been compiled in a sorghum transcriptome compendium. The goal of this resource paper is to describe compendium content, accessibility, and a compendium data analysis pipeline and to illustrate the types of information that can be derived from the compendium with a focus on the elucidation of gene regulatory networks useful for guiding the improvement of sorghum traits through gene editing.

RNA-seq↗
DOE OSTI2022

Performance of Microreactor Test Article with Embedded Sensors During Testing in The Single Primary Heat Extraction and Removal Emulator

The nuclear industry is pursuing microreactors that can be factory assembled and deployed to remote regions for reliable power generation. One class of microreactors uses a monolithic metal core block coupled to heat pipes that use passive heat flow, increasing the surface area for heat transfer without requiring active coolant flow through the reactor core. Additional experimental testing is required to understand the heat rejection limitations of heat pipes and thermal stresses in the monolithic core block due to significant temperature gradients. This report describes the initial characterization and testing of a stainless-steel test article that was fabricated with embedded sensors to measure heat pipe performance limits, as well as spatially distributed temperatures and strains during electrically heated thermal testing to simulate nuclear heating. The electrically heated testing was performed in the Single Primary Heat Extraction and Removal Emulator facility located at Idaho National Laboratory. The ultimate goals of this work are to (1) accurately monitor temperature and strain distributions that result from differential thermal expansion in the test articles and (2) quantify the heat rejection limits of heat pipes as a function of operating temperature and working fluid during steady-state and transient operations. Initial tests focused on the feasibility of using advanced fiber-optic sensors and other sensor technologies to improve the understanding of temperature and strain distributions within the electrically heated experiments. However, these sensing capabilities could benefit the broader microreactor community if the sensors could be used to monitor component and system health during nuclear operations to inform a limited number of microreactor operators, ultimately reducing operation and maintenance costs and moving toward semiautonomous operation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

NEAMS-Multiphysics MOOSE End Year Framework Activities FY20

The Multiphysics Object Oriented Simulation Environment (MOOSE) is a general finite element package meant for high performance solution of multiphysics problems in science and engineering. In this report, we present additions and enhancements to MOOSE funded by the Nuclear Engineering Advanced Modeling and Simulation (NEAMS) program. NEAMS-funded MOOSE framework library improvements include: expansion of support for multi-level multi-application restart; enhancement of coupling between native MOOSE applications and external libraries; addition of a sparse automatic differentiation (AD) container enabling non-local degree of freedom coupling; block-specific quadrature rules; further development of an eigenvalue executioner; faster setup of periodic boundary conditions; and creation of a mesh meta-data system streamlining simulation startup. Besides developing the framework library, NEAMS funds were used to overhaul a swath of important MOOSE infrastructure in order to substantially improve user experience. These critical infrastructure changes included adapting MOOSE to python 3, improving the test harness to catch race conditions, and most importantly transitioning MOOSE to use Conda, a globally known packaging system, that greatly eases software adoption.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1971

Calculation of turbulent boundary layers with heat transfer and pressure gradient utilizing a compressibility transformation. Part 1: Summary report

The analysis uses a compressibility transformation and utilizes higher order closure rules to complete the transformation. By requiring that the momentum equations in differential form be satisfied at the wall and at the sublayer edge, correspondence rules are obtained which relate the variable property (VP) flow to a constant property (CP) flow in which mass transfer and pressure gradient occur simultaneously. A new CP formulation is developed and numerical results for a variety of cases are presented. Comparisons with earlier forms of the transformation and with experiment are included. For the zero pressure gradient case some differences between the various predictions are observed. For the several pressure gradient cases examined, the results are found to be essentially identical to those given by first order closure rules; i.e., by a form of transformation which relates the VP flow to a CP flow with pressure gradient but zero mass transfer.

Economos, C.↗
NASA NTRS1979

Summary of the two year NASA program for active control of ATS-5/6 environmental charging

Experiments conducted on the ATS 5 and ATS 6 which have demonstrated the feasibility of modifying or clamping the environmentally induced potential of these spacecraft are described. The results of these experiments indicate that a thermionic electron source is capable of replacing photo-emitted electrons during eclipse. However, the utility of this type of device is limited if its emission is suppressed by local electric fields. On the other hand, it is shown that a plasma source will not only serve as a substitute for photo-emitted electrons but will also suppress differential charging of isolated elements of the spacecraft which would tend to suppress electron emission. This later device is therefore capable of clamping the potential of a spacecraft without special considerations of its coupling to the ambient plasma.

Bartlett, R. O.↗
NASA NTRS1995

Differential absorption lidars for remote sensing of atmospheric pressure and temperature profiles

A near infrared differential absorption lidar technique is developed using atmospheric oxygen as a tracer for high resolution vertical profiles of pressure and temperature with high accuracy. Solid-state tunable lasers and high-resolution spectrum analyzers are developed to carry out ground-based and airborne measurement demonstrations and results of the measurements presented. Numerical error analysis of high-altitude airborne and spaceborne experiments is carried out, and system concepts developed for their implementation.

Korb, C. Laurence↗
DOE OSTI2023

Measurement of the polarisation of W bosons produced in top-quark decays using dilepton events at $\sqrt{s}$ = $13$ TeV with the ATLAS experiment

A measurement of the polarisation of W bosons produced in top-quark decays is presented, using proton–proton collision data at a centre-of-mass energy of $\sqrt{s}$ = $13$ TeV. The data were collected by the ATLAS detector at the Large Hadron Collider and correspond to an integrated luminosity of 139 fb -1 . The measurement is performed selecting $t$$\overline{t}$ events decaying into final states with two charged leptons (electrons or muons) and at least two b-tagged jets. The polarisation is extracted from the differential cross-section distribution of the cos$⁡θ$* variable, where $θ$* is the angle between the momentum direction of the charged lepton from the W boson decay and the reversed momentum direction of the b-quark from the top-quark decay, both calculated in the W boson rest frame. Parton-level results, corrected for the detector acceptance and resolution, are presented for the cos⁡θ* angle. The measured fractions of longitudinal, left- and right-handed polarisation states are found to be $f$ 0 = 0.684 ± 0.005 (stat.) ± 0.014 (syst.), $f$ L = 0.318 ± 0.003 (stat.) ± 0.008 (syst.) and $f$ R = -0.002 ± 0.002 (stat.) ± 0.014 (syst.), in agreement with the Standard Model prediction.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

When Do Band Gap Calculations Agree with Experiments in Monolayer-Protected Cu 14 and Au 20 Atomically Precise Nanoclusters? A (TD)-DFT Comparison of HOMO–LUMO, Fundamental, Optical, and Electrochemical Energy Gaps

In view of the tremendous progress in atomically precise metal nanoclusters where electrochemical and optical energetics are routinely supported by computations to establish structure−function correlations, we explore the relationship between different protocols for measuring and computing band gaps of two distinct organic ligand-protected nanoclusters: [Cu 14 H 10 (MBN) 3 (PPh 3 ) 8 ] + and Au 20 (TBBT) 16 . Through UV/visible spectroscopy and differential pulse voltammetry, we measure optical and electrochemical band gaps in those systems. We then compare these experimentally determined gaps to HOMO−LUMO gaps, fundamental gaps, vertical excitation energies, and E o ox − E o red potentials computed using different density functional theory (DFT) or time-dependent DFT (TDDFT) methods. Specifically, in both copper and gold nanoclusters, we test the effect of truncating inert ligands from the model and compare density functionals with varying degrees of Hartree−Fock (HF) exchange from 0 to 50%, range-separated hybrids with a varying long-range tuning parameter, different correlation functionals, basis sets, and (equilibrium and nonequilibrium) continuum solvation models. Despite having different frontier orbital characters (the copper nanocluster has a metal-to-ligand charge transfer character while the gold nanocluster has metal-centered frontier orbitals), both nanoclusters display a similar sensitivity of the HOMO−LUMO gap to the HF exchange that is partially mitigated when computing the fundamental, optical, and electrochemical gaps. Other factors, such as the nature of the correlation functional, basis set, and geometry relaxation, have a considerably smaller effect on computed band gaps in these systems. Overall, this work provides guidelines for factors of varied importance for correlating computed and experimental band gap values.

Chemical calculations↗
DOE OSTI2024

High Performance Heat Pipe Power Transient Testing at SPHERE Facility

Microreactors are being researched, designed, and built at Idaho National Laboratory (INL). Microreactors are small reactors defined at less than 20MW of power. These reactor concepts are also being looked at throughout industry for various applications. An important aspect of these reactor designs is economic feasibility i.e. lower overnight capital cost. The driving factors for implementing microreactors are quick setup and takedown, minimal operators, and the ability to manufacture them readily and to fit in mid-sized containers for transport. A specific area of research to aid in successful integration of these factors within the designs is passive heat removal of the core’s thermal power. Interest in heat pipes to achieve this passive heat removal has been shown across multiple industry partners. Because of this interest, INL has developed a test facility to facilitate experimental tests for sodium filled heat pipes. INL has developed the Single Primary Heat Extraction and Removal Emulator (SPHERE) facility to run experiments on high performance, sodium filled heat pipes. As mentioned above, heat pipes are passive heat transfer devices. Radially, heat pipes are broken up into an outer wall, a small annular gap, a wick structure, and a centerline gap. They function by utilizing latent heat transfer. Heat pipes are traditionally separated into three regions, an evaporator (heat input), an adiabatic region, and finally a condenser region (heat removal). As heat is being applied to the evaporator, the working fluid undergoes a phase change to a vapor. This phase change causes a differential pressure across the axial length of the pipe driving flow down the center gap of the heat pipe. The vapor flows down past the adiabatic region to the condenser where the heat is removed. This heat removal forces the working fluid to phase change back to a liquid. The wick structure is then utilized to drive the flow back towards the evaporator by capillary forces. This backflow is aided by the annular gap. Because this heat transfer mechanism functions with latent heat transfer, the heat pipe is close to isothermal down the axial length. Heat pipes can operate under a wide range of working fluids. Considerations for these working fluids are primarily driven by operating temperatures amongst other important factors based around overall performance. Sodium filled heat pipes operate from 450°C up to 900°C. This temperature range works well for the current microreactor designs. In conjunction with this experimental capability, INL has developed a modeling software to simulate heat pipe physics within reactor cores. This modeling software is called Sockeye and functions under the established INL Multiphysics Object Oriented Simulation Environment (MOOSE). SPHERE also supports Sockeye development by providing the modeling team with experimental data on an array of setups and operating parameters to support validation efforts. A power transient experiment was performed utilizing the SPHERE facility to continue to aid with Sockeye development. The testing followed a proposed test plan to ramp up and down the temperature of the heat pipe. Sockeye models steady state heat pipe operation with high accuracy, the data provided by the power transient testing aims to assist with the validation efforts and further enhance transient modeling capability of the tool [2].

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

The ENDF/B Nuclear Data Library and Its Impact on Reactor Simulations

The ENDF/B library, which is developed, maintained, and distributed by the Cross Section Evaluation Working Group, is the main source of nuclear data for analyses and computational simulations in nuclear applications, like different nuclear reactors concepts, radiation shielding, medical applications, astrophysics, etc. The library is constantly being improved and updated, with each release bringing an optimal representation of nuclear interactions as they are understood in their time. The most recent release, ENDF/B-VIII.1, represents a significant improvement in terms of the performance and consistency of the measured differential data relative to previous versions, as it combines the most recent experimental differential data and advanced theoretical nuclear models. As one of the many highlights, ENDF/B-VIII.1 restores a high-burnup depletion performance, comparable to ENDF/B-VII.1, that had been degraded in ENDF/B-VIII.0, while further improving the performance in criticality benchmarks, such as those in the Mosteller’s suite. Additionally noteworthy is the improved performance of ENDF/B-VIII.1 in radiation shielding and thick-target leakage spectrum integral experiments, which are also important for fusion and reactor applications. In this work we present in a very summarized way the main updates implemented in the ENDF/B-VIII.1 release and its main impacts, and also begin to delineate the path forward as to what to expect in the future for the next ENDF/B release, which, based on the timeline of the past few releases, is estimated to happen around 5 years from now. We emphasize that the ENDF/B-VIII.1 release was the product of an enormous collaborative effort among many authors and that for a complete detailed picture, the reader is strongly encouraged to refer to the article accompanying the release, which is currently in the publication process, but available as preprint [G. P. A. Nobre et al. arXiv Preprint arXiv: 2511.03564 (2025)].

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Adaptation to Environmental Extremes Structures Functional Traits in Biological Soil Crust and Hypolithic Microbial Communities

Biological soil crusts (biocrusts) are widespread in drylands and deserts. At the microhabitat scale, they also host hypolithic communities that live under semitranslucent stones. Both environmental niches experience exposure to extreme conditions such as high UV radiation, desiccation, temperature fluctuations, and resource limitation. However, hypolithic communities are somewhat protected from extremes relative to biocrust communities. Conditions are otherwise similar, so comparing them can answer outstanding questions regarding adaptations to environmental extremes. Using metagenomic sequencing, we assessed the functional potential of dryland soil communities and identified the functional underpinnings of ecological niche differentiation in biocrusts versus hypoliths. We also determined the effect of the anchoring photoautotroph (moss or cyanobacteria). Genes and pathways differing in abundance between biocrusts and hypoliths indicate that biocrust communities adapt to the higher levels of UV radiation, desiccation, and temperature extremes through an increased ability to repair damaged DNA, sense and respond to environmental stimuli, and interact with other community members and the environment. Intracellular competition appears to be crucial to both communities, with biocrust communities using the Type VI Secretion System (T6SS) and hypoliths favoring a diversity of antibiotics. The dominant primary producer had a reduced effect on community functional potential compared with niche, but an abundance of genes related to monosaccharide, amino acid, and osmoprotectant uptake in moss-dominated communities indicates reliance on resources provided to heterotrophs by mosses. Our findings indicate that functional traits in dryland communities are driven by adaptations to extremes and we identify strategies that likely enable survival in dryland ecosystems.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Bilevel parameter optimization for learning nonlocal image denoising models

We propose a bilevel optimization approach for the estimation of parameters in nonlocal image denoising models. The parameters we consider are both the space-dependent fidelity weight and weights within the kernel of the nonlocal operator. In both cases we investigate the differentiability of the solution operator in function spaces and derive a first order optimality system that characterizes local minima. For the numerical solution of the problems, we propose a second-order trust-region algorithm in combination with a finite element discretization of the nonlocal denoising models and we introduce a computational strategy for the solution of the resulting dense linear systems. Several experiments illustrate the applicability and effectiveness of our approach.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Multi-Differential Charged Current 𝝂_𝝁− Argon Cross Section without Pions in the Final State Measurement in MicroBooNE , and Current Status of Simultaneous Cross Section Extraction with ANNIE

MicroBooNE, an 85-tonne liquid argon time projection chamber detector is on-axis to the Booster Neutrino Beam (BNB) at Fermi National Accelerator Laboratory. MicroBooNE is elucidating neutrino interactions with argon through cross-section measurements to refine interaction models and reduce uncertainties. In this poster, we present recent published single and double multi-differential charged current (CC) cross section with zero pions in the final state (CC-0 ) as a function of muon momentum ( ) and the cosine of the muon angle ( ). We present the details of the event selection and the extraction of 1D and 2D cross sections. We further report on the status of a simultaneous cross-section extraction conducted in conjunction with the ANNIE experiment, which employs a Gd-H O target and operates on the same BNB beamline. This joint measurement enables a precision test of nuclear A-dependence between oxygen and argon, with shared flux and cross-section model correlations leading to the cancellation of systematic uncertainties.

Nguyen, Christian Van [Rutgers U., Piscataway] (OR↗
DOE OSTI2022

Measurement of Neutral Current Elastic Cross Section in MicroBooNE

The MicroBooNE experiment is an 85 ton active volume liquid-argon time projection chamber located in the Fermilab Booster Neutrino Beamline. MicroBooNE’s ability to detect low-energy protons allows us to study single proton events with a four-momentum transfer squared, Q$^2$, as low as 0.10 GeV$^2$. We present a measurement of the flux-averaged neutral-current elastic differential cross sections for neutrinos scattering on argon as a function of Q$^2$, proton momentum and proton angle with respect to the direction of the neutrino beam. This is our first step towards extracting the strange quark contribution to the axial form factor, which is not only the least-constrained contribution to the neutral-current elastic scattering cross section but is also crucial for understanding the strange quark contribution to the proton spin.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

The suitability of differentiable, physics-informed machine learning hydrologic models for ungauged regions and climate change impact assessment

As a genre of physics-informed machine learning, differentiable process-based hydrologic models (abbreviated as δ or delta models) with regionalized deep-network-based parameterization pipelines were recently shown to provide daily streamflow prediction performance closely approaching that of state-of-the-art long short-term memory (LSTM) deep networks. Meanwhile, δ models provide a full suite of diagnostic physical variables and guaranteed mass conservation. Here, we ran experiments to test (1) their ability to extrapolate to regions far from streamflow gauges and (2) their ability to make credible predictions of long-term (decadal-scale) change trends. We evaluated the models based on daily hydrograph metrics (Nash–Sutcliffe model efficiency coefficient, etc.) and predicted decadal streamflow trends. For prediction in ungauged basins (PUB; randomly sampled ungauged basins representing spatial interpolation), δ models either approached or surpassed the performance of LSTM in daily hydrograph metrics, depending on the meteorological forcing data used. They presented a comparable trend performance to LSTM for annual mean flow and high flow but worse trends for low flow. For prediction in ungauged regions (PUR; regional holdout test representing spatial extrapolation in a highly data-sparse scenario), δ models surpassed LSTM in daily hydrograph metrics, and their advantages in mean and high flow trends became prominent. In addition, an untrained variable, evapotranspiration, retained good seasonality even for extrapolated cases. The δ models' deep-network-based parameterization pipeline produced parameter fields that maintain remarkably stable spatial patterns even in highly data-scarce scenarios, which explains their robustness. Combined with their interpretability and ability to assimilate multi-source observations, the δ models are strong candidates for regional and global-scale hydrologic simulations and climate change impact assessment.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1982

Phenomenological optical potential analysis of proton-carbon elastic scattering at 200 MeV

Differential cross sections for 200 MeV protons elastically scattered from C-12 were analyzed utilizing a local, complex, spin-dependent optical potential with a harmonic well radial dependence. Analyses were performed using the WKB and eikonal approximations. For the latter, first-order corrections to he phase shifts were incorporated to account for the spin-orbit contribution. Large disagreement between theory and experiment was observed when the usual Thomas form for the spin-orbit potential was utilized. Substantial improvement was obtained by allowing the parameters in the central and spin-orbit potential terms to vary independently.

Bidasaria, H. B.↗
NASA NTRS1988

Numerical modeling of multidimensional flow in seals and bearings used in rotating machinery

The rotordynamic behavior of turbomachinery is critically dependent on fluid dynamic rotor forces developed by various types of seals and bearings. The occurrence of self-excited vibrations often depends on the rotor speed and load. Misalignment and rotor wobbling motion associated with differential clearance were often attributed to stability problems. In general, the rotative character of the flowfield is a complex three dimensional system with secondary flow patterns that significantly alter the average fluid circumferential velocity. A multidimensional, nonorthogonal, body-fitted-grid fluid flow model is presented that describes the fluid dynamic forces and the secondary flow pattern development in seals and bearings. Several numerical experiments were carried out to demonstrate the characteristics of this complex flowfield. Analyses were performed by solving a conservation form of the three dimensional Navier-Stokes equations transformed to those for a rotating observer and using the general-purpose computer code PHOENICS with the assumptions that the rotor orbit is circular and that static eccentricity is zero. These assumptions have enabled a precise steady-state analysis to be used. Fluid injection from ports near the seal or bearing center increased fluid-film direct dynamic stiffness and, in some cases, significantly increased quadrature dynamic stiffness. Injection angle and velocity could be used for active rotordynamic control; for example, injection, when compared with no injection, increased direct dynamic stiffness, which is an important factor for hydrostatic bearings.

Hendricks, R. C.↗