Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computer Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Development of a Library for Conducting Monte Carlo Tallies on Heterogeneous Systems

A library is introduced that enables users to conduct Monte Carlo tallies on heterogeneous computing systems. The library can be built with or linked to a Monte Carlo transport code to provide tally capabilities for the project. The library provides a set of tools and an interface for constructing tallies that can be computed on CPUs or GPUs regardless of where the sample data was generated. The library can be incorporated into existing Monte Carlo transport codes at both the research and production level with minimal intrusion into the transport code. The tally library is capable of computing a variety of tallies including track-length histogram (mesh) tallies, collisionbased kernel density estimators, functional expansion tallies, eigenvalue sensitivity coefficients via iterated fission probability, and sensitivities of reaction rates or adjoint-weighted quantities via differential operator sampling. The parallelization methods are discussed and speedups are shown for 2-D and 3-D problems with comparisons to both the tally library CPU implementations as well as the tally capabilities in the host transport code. Performance results and examples are shown for MCNP, MCATK, and OpenMC.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1988

Gaussian approximation versus nearly exact performance analysis of optical communication systems with PPM signaling and APD receivers

A 25-Mb/s direct-detection optical communication system that used Q = 4 PPM (pulse-position modulation) signaling was constructed and its performance measured under laboratory conditions. The system used a single-mode AlGaAs laser diode (lambda = 834 nm) and low-noise silicon avalanche photodiode (APD). A procedure for numerically computing system performance is given that uses the nearly exact Webb approximation of the true Conradi distribution for the APD output and does not require excessive amounts of computer time. Comparison revealed that modeling the APD ouptut as a Gaussian process under conditions of negligible background radiation and low (less than 10 to the -12 A) APD bulk leakage currents leads to substantial underestimates of optimal APD gain and overestimates of system bit error probability. Examples illustrate the breakdown of the Gaussian approximation in assessing system performance. The measured performance was in excellent agreement with that predicted by the computational procedure. The system achieved a bit error probability of 10 to the -6 at a received signal energy, corresponding to an average of 60 absorbed photons/bit and optimal APD gain of 700.

Davidson, Frederic M.↗
NASA NTRS1992

Implementation of an intelligent control system

A laboratory testbed facility which was constructed at NASA LeRC for the development of an Intelligent Control System (ICS) for reusable rocket engines is described. The framework of the ICS consists of a hierarchy of various control and diagnostic functions. The traditional high speed, closed-loop controller resides at the lowest level of the ICS hierarchy. Above this level resides the diagnostic functions which identify engine faults. The ICS top level consists of the coordination function which manages the interaction between an expert system and a traditional control system. The purpose of the testbed is to demonstrate the feasibility of the OCS concept by implementing the ICS as the primary controller in a simulation of the Space Shuttle Main Engine (SSME). The functions of the ICS which are implemented in the testbed are as follows: an SSME dynamic simulation with selected fault mode models, a reconfigurable controller, a neural network for sensor validation, a model-based failure detection algorithm, a rule based failure detection algorithm, a diagnostic expert system, an intelligent coordinator, and a user interface which provides a graphical representation of the event occurring within the testbed. The diverse nature of the ICS has led to the development of a distributed architecture consisting of specialized hardware and software for the implementation of the various functions. This testbed is made up of five different computer systems. These individual computers are discussed along with the schemes used to implement the various ICS components. The communication between computers and the timing and synchronization between components are also addressed.

Simon, D. L.↗
DOE OSTI2022

System, method, and computer program product for transporting an unmanned vehicle

A method, system, and computer program product is provided for transporting an unmanned vehicle to a destination location. The method includes determining a ground vehicle from a plurality of ground vehicles based on a location of the ground vehicle, the destination location, and a location of the unmanned vehicle, controlling the unmanned vehicle to the location of the ground vehicle, controlling at least one attachment mechanism to attach the unmanned vehicle to the ground vehicle, in response to the ground vehicle traveling to a second location, controlling the at least one attachment mechanism to detach the unmanned vehicle from the ground vehicle, and controlling the unmanned vehicle to the destination location.

Samaras, Constantinos↗
DOE OSTI2013

ASTROPULSE: A SEARCH FOR MICROSECOND TRANSIENT RADIO SIGNALS USING DISTRIBUTED COMPUTING. I. METHODOLOGY

We are performing a transient, microsecond timescale radio sky survey, called 'Astropulse', using the Arecibo telescope. Astropulse searches for brief (0.4 {mu}s to 204.8 {mu}s ), wideband (relative to its 2.5 MHz bandwidth) radio pulses centered at 1420 MHz. Astropulse is a commensal (piggyback) survey, and scans the sky between declinations of -1. Degree-Sign 33 and 38. Degree-Sign 03. We obtained 1540 hr of data in each of seven beams of the ALFA receiver, with two polarizations per beam. The data are one-bit complex sampled at the Nyquist limit of 0.4 {mu}s per sample. Examination of timescales on the order of microseconds is possible because we used coherent dedispersion, a technique that has frequently been used for targeted observations, but has never been associated with a radio sky survey. The more usual technique, incoherent dedispersion, cannot resolve signals below a minimum timescale which depends on the signal's dispersion measure (DM) and frequency. However, coherent dedispersion requires more intensive computation than incoherent dedispersion. The required processing power was provided by BOINC, the Berkeley Open Infrastructure for Network Computing. BOINC is a distributed computing system, allowing us to utilize hundreds of thousands of volunteers' computers to perform the necessary calculations for coherent dedispersion. Astrophysical events that might produce brief radio pulses include giant pulses from pulsars, rotating radio transients, exploding primordial black holes, or new sources yet to be imagined. Radio frequency interference and noise contaminate the data; these are mitigated by a number of techniques including multi-polarization correlation, DM repetition detection, and frequency profiling.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

AthenaK: A Performance-portable Version of the Athena++ Adaptive Mesh Refinement Framework

We describe AthenaK: a new implementation of the Athena++ block-based adaptive mesh refinement framework using the Kokkos programming model. Finite volume methods for Newtonian, special relativistic, and general relativistic (GR) hydrodynamics and magnetohydrodynamics (MHD), and GR-radiation hydrodynamics and MHD, as well as a module for evolving Lagrangian tracer or charged test particles (e.g., cosmic rays) are implemented using the framework. In two companion papers, we describe (1) a new solver for the Einstein equations based on the Z4c formalism, and (2) a GRMHD solver in dynamical spacetimes also implemented using the framework, enabling new applications in numerical relativity. By adopting Kokkos, the code can be run on virtually any hardware, including CPUs, GPUs from multiple vendors, and emerging Advanced RISC Machine processors. AthenaK shows excellent performance and weak scaling, achieving over 1 billion cell updates per second for hydrodynamics in three dimensions on a single NVIDIA Grace Hopper processor. It does this with a typical parallel efficiency of 80% on 65,536 AMD GPUs on the OLCF Frontier system. Such performance portability enables AthenaK to leverage modern exascale computing systems for challenging applications in astrophysical fluid dynamics, numerical relativity, and multimessenger astrophysics.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1976

A forward view on reliable computers for flight control

The requirements for fault-tolerant computers for flight control of commercial aircraft are examined; it is concluded that the reliability requirements far exceed those typically quoted for space missions. Examination of circuit technology and alternative computer architectures indicates that the desired reliability can be achieved with several different computer structures, though there are obvious advantages to those that are more economic, more reliable, and, very importantly, more certifiable as to fault tolerance. Progress in this field is expected to bring about better computer systems that are more rigorously designed and analyzed even though computational requirements are expected to increase significantly.

Goldberg, J.↗
NASA NTRS1977

Highly reliable multiprocessors

Highly reliable fault-tolerant computer systems are discussed for use in flight-critical avionic and control systems of future commercial transport aircraft. Such aircraft are envisioned to have integrated systems, to be terminally configured, and to be equipped with fly-by-wire flight control systems, all of which require highly reliable, fault-tolerant computers. Two candidate computer architectures are identified as having the potential of satisfying the commercial transport aircraft requirements.

Murray, N. D.↗
NASA NTRS1979

Digital systems design language

Digital Systems Design Language (DDL) is implemented on the SEL-32 Computer Systems. The detaileds of the language, the translator, and the simulator, and the smulator programs are given. Several example descriptions and a tutorial on hardware description languages are provided, to guide the user.

Shiva, S. G.↗
NASA NTRS1980

Operation plan for the data 100/LARS terminal system

The Data 100/LARS terminal system provides an interface for processing on the IBM 3031 computer system at Purdue University's Laboratory for Applications of Remote Sensing. The environment in which the system is operated and supported is discussed. The general support responsibilities, procedural mechanisms, and training established for the benefit of the system users are defined.

Bowen, A. J., Jr.↗
NASA NTRS1982

Design Aids for Real-Time Systems (DARTS)

Design-Aids for Real-Time Systems (DARTS) is a tool that assists in defining embedded computer systems through tree structured graphics, military standard documentation support, and various analyses including automated Software Science parameter counting and metrics calculation. These analyses provide both static and dynamic design quality feedback which can potentially aid in producing efficient, high quality software systems.

Szulewski, P. A.↗
NASA NTRS1979

Digital systems design language. Design synthesis of digital systems

The Digital Systems Design Language (DDL) is implemented on the SEL-32 computer systems. The details of the language, translator and simulator programs are included. Several example descriptions and a tutorial on hardware description languages are provided, to guide the user.

Shiva, S. G.↗
NASA NTRS1985

A report from the Space Science and Engineering Center, the University of Wisconsin-Madison, Madison, Wisconsin

Operational forecasters have habitually been plagued with the problems associated with acquisition, display, and dissemination of data used in preparing forecasts. The centralized storm information system (CSIS) experiment provided an operational forecaster with an interactive computer system which could perform these preliminary tasks more quickly and accurately than any human could. CSIS objectives pertaining to improved severe storms forecasting and warning procedures are addressed.

Source record↗
NASA NTRS1990

Parallel/distributed direct method for solving linear systems

A new family of parallel schemes for directly solving linear systems is presented and analyzed. It is shown that these schemes exhibit a near optimal performance and enjoy several important features: (1) For large enough linear systems, the design of the appropriate paralleled algorithm is insensitive to the number of processors as its performance grows monotonically with them; (2) It is especially good for large matrices, with dimensions large relative to the number of processors in the system; (3) It can be used in both distributed parallel computing environments and tightly coupled parallel computing systems; and (4) This set of algorithms can be mapped onto any parallel architecture without any major programming difficulties or algorithmical changes.

Lin, Avi↗
NASA NTRS1992

Front-End Processor For Metrology-Information System

Front-end processor for NASA Metrology Information System (NMIS) is real-time relational data-base computer system designed to distribute processing for NMIS mainframe system or run as stand-alone local-area-network data-base system. System used in large calibration laboratories for work control and to maintain records of calibration, repair, costs, manpower usage, traceability, and other pertinent facts about instruments supported by laboratories. Provides enhancements to existing NASA Metrology Information System and batches upload to minimize mainframe I/O at times of heavy usage.

Muse, Walter S.↗
NASA NTRS1995

Space Experiment Module: A new low-cost capability for education payloads

The Space Experiment Module (SEM) concept is one of a number of education initiatives being pursued by the NASA Shuttle Small Payloads Project (SSPP) in an effort to increase educational access to space by means of Space Shuttle Small Payloads and associated activities. In the SEM concept, NASA will provide small containers ('modules') which can accommodate small zero-gravity experiments designed and constructed by students. A number, (nominally ten), of the modules will then be flown in an existing Get Away Special (GAS) carrier on the Shuttle for a flight of 5 to 10 days. In addition to the module container, the NASA carrier system will provide small amounts of electrical power and a computer system for controlling the operation of the experiments and recording experiment data. This paper describes the proposed SEM carrier system and program approach.

Goldsmith, Theodore C.↗
NASA NTRS1996

STS-75 Flight Day 2

On this second day of the STS-75 mission, the flight crew, Cmdr. Andrew Allen, Pilot Scott Horowitz, Payload Cmdr. Franklin Chang-Diaz, Payload Specialist Umberto Guidoni (Italy), and Mission Specialists Jeffrey Hoffman, Maurizio Cheli (ESA) and Claude Nicollier (ESA), are shown, via satellite-downlinking, online with Dan Golden, the Director of NASA, discussing the mission and performing system set-ups. A problem with the 'Smart Flex' computer system develops and the crew spends most of the day trying to fix the problem with the help of Mission Control. Earth views include cloud cover, various land and water masses, and Earth's Arctic regions.

Source record↗
NASA NTRS1997

Flow of a Gas Turbine Engine Low-Pressure Subsystem Simulated

The NASA Lewis Research Center is managing a task to numerically simulate overnight, on a parallel computing testbed, the aerodynamic flow in the complete low-pressure subsystem (LPS) of a gas turbine engine. The model solves the three-dimensional Navier- Stokes flow equations through all the components within the LPS, as well as the external flow around the engine nacelle. The LPS modeling task is being performed by Allison Engine Company under the Small Engine Technology contract. The large computer simulation was evaluated on networked computer systems using 8, 16, and 32 processors, with the parallel computing efficiency reaching 75 percent when 16 processors were used.

Veres, Joseph P.↗