Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Capacitors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Solid-state resistor for pulsed power machines

A flexible solid-state resistor comprises a string of ceramic resistors that can be used to charge the capacitors of a linear transformer driver (LTD) used in a pulsed power machine. The solid-state resistor is able to absorb the energy of a switch prefire, thereby limiting LTD cavity damage, yet has a sufficiently low RC charge time to allow the capacitor to be recharged without disrupting the operation of the pulsed power machine.

36 MATERIALS SCIENCE↗

Single phase bi-directional AC-DC converter with reduced passive components size and common mode electro-magnetic interference

A bidirectional AC-DC converter is presented with reduced passive component size and common mode electro-magnetic interference. The converter includes an improved input stage formed by two coupled differential inductors, two coupled common and differential inductors, one differential capacitor and two common mode capacitors. With this input structure, the volume, weight and cost of the input stage can be reduced greatly. Additionally, the input current ripple and common mode electro-magnetic interference can be greatly attenuated, so lower switching frequency can be adopted to achieve higher efficiency.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Overvoltage protection system for wireless power transfer systems

A wireless power transfer overvoltage protection system is provided. The system includes a resonant receiving circuit. The resonant receiving circuit includes an inductor, a resonant capacitor and a first switching device. The first switching device is connected the ends of the inductor. The first switching device has a first state in which the ends of the inductor are electrically coupled to each other through the first switching device, and a second state in which the inductor and resonant capacitor are capable of resonating. The system further includes a control module configured to control the first switching device to switching between the first state and the second state when the resonant receiving circuit is charging a load and a preset condition is satisfied and otherwise, the first switching device is maintained in the first state.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Method and apparatus to provide power conversion with high power factor

A power converter circuit rectifies a line voltage and applies the rectified voltage to a stack of capacitors. Voltages on the capacitors are coupled to a plurality of regulating converters to be converted to regulated output signals. The regulated output signals are combined and converted to a desired DC output voltage of the power converter. Input currents of the regulating converters are modulated in a manner that enhances the power factor of the power converter.

30 DIRECT ENERGY CONVERSION↗

Extended Pulse-Powered Humidity-Freeze Cycling for Testing Module-Level Power Electronics

An EMI suppression capacitor (polypropylene film type) failed by 'popcorning' due to vapor outgassing in pulse powered humidity-freeze cycles. No shorts or shunts could be detected despite mildly corroded metallization visible in the failed capacitor. Humidity-freeze cycling is optimized to break into moisture barriers. However, further studies will be required on additional module level power electronic (MLPE) devices to optimize the stress testing for condensation to precipitate any weakness to short circuiting and other humidity/bias failure modes.

14 SOLAR ENERGY↗

Compact high current, high efficiency laser diode driver

A device includes a u-channel shaped member and a printed circuit board including a plurality of capacitors. Each of the plurality of capacitors has a mounting surface mounted to the printed circuit board and an opposing heat transfer surface thermally coupled to the u-channel shaped member. The device also includes an output cable coupled to the printed circuit board and a return cable coupled to the printed circuit board. The device further includes a control transistor disposed inside the u-channel shaped member and a current sensing resistor disposed inside the u-channel shaped member.

42 ENGINEERING↗

Methods to form and operate multi-terminal power systems

A method for forming and operating a multi-terminal power system, includes: connecting multiple sending terminals to a network of a power system; and local control of each sending terminal to behave as a constant-power source such that both output voltage and output current of the sending terminal may simultaneously vary in response to changing external circuit conditions while maintaining constant a product of the output voltage and the output current of the sending terminal. At least one sending terminal may include a capacitive output converter having a capacitor connected between two output terminals and a controlled current source connected in parallel to the capacitor, or an inductive output converter having an inductor connected to an output terminal and a controlled voltage source connected in series with the inductor.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Extended Pulse-Powered Humidity-Freeze Cycling for Testing Module-Level Power Electronics

An EMI suppression capacitor (polypropylene film type) failed by 'popcorning' due to vapor outgassing in the pulse powered humidity-freeze cycles. No shorts or shunts could be detected despite mildly corroded metallization visible in the failed capacitor. Humidity-freeze cycling is optimized to break into moisture barriers. However, further studies will done on additional MLPE devices to optimize the stress testing for condensation to precipitate any weakness to short circuiting and other humidity/bias failure modes.

14 SOLAR ENERGY↗

Low-inductance direct current power bus

A DC power bus having reduced parasitic inductance and higher tolerable operating temperature is disclosed. In example embodiments, a bus structure overlies a printed circuit board, and an array of capacitors is arranged on a surface of the printed circuit board distal the bus structure. The bus structure comprises an upper metal plate, a lower metal plate, and a dielectric film interposed between the upper and lower metal plates. The capacitors are connected in parallel between conductive planes of the printed circuit board. The upper and lower metal plates of the bus structure are connected to respective conductive planes of the printed circuit board.

Neely, Jason C.↗

Comparison of 22 kHz and 85 kHz 50 kW Wireless Charging System Using Si and SiC Switches for Electric Vehicle

Fast charging in transportation application requires high-power (>50 kW) operation. The overall size of wireless charging systems (WCS) must increase to meet the high-power requirement. As a result, high power systems produce more electromagnetic field (EMF) emissions. Although higher operating frequencies (85 kHz) reduce the size of inductors and capacitors, system losses tend to increase. High-power systems are traditionally investigated for 10 kHz to 22 kHz operation to reduce the switching loss in the converter, and conductive and magnetic losses in the power pad. The use of SiC MOSFETs reduces conduction and switching losses in the converter even at higher frequencies. In this paper, a comprehensive loss comparison of 50 kW wireless charging system is conducted for 85 kHz and 22 kHz operation of Si MOSFET and SiC MOSFET converters. Detailed performance indexes are compared analytically as a function of frequency and verified using FEA and PLECS. This comprehensive system level study shows that magnetic losses can be reduced significantly, and that EMF emission can be reduced by 50% by moving from 22 kHz to 85 kHz. Moreover, the system requires 50% less copper and allows a significant reduction in the size of the primary and secondary filter capacitor at 85 kHz. The results show that the system efficiency at 85 kHz can be increased by 21% compared to 22 kHz operation by using a SiC MOSFET converter.

Shahidul haque, Moinul↗

Impedance-Based Prediction of SSR-Generated Harmonics in Doubly-Fed Induction Generators: Preprint

Doubly-fed induction generators (DFIGs) are prone to subsynchronous resonance (SSR) with series-compensated transmission lines and experiencing SSR-generated harmonics of wide-ranging magnitudes. This paper presents a large-signal impedance-based approach for the prediction of the magnitude of SSR-generated harmonics in DFIGs. Note that the large-signal impedance of a network shows the variation in its impedance response with the magnitude of perturbation at its terminals. It is discovered in this paper that the impedance of a series-compensated transmission line starts changing with the magnitude of SSR because of the metal oxide varistor (MOV) based protection of series capacitors in the line. The changing line impedance locks the growth of SSR beyond a certain point, where the DFIG forms a limit cycle mode and emits harmonics at the SSR frequency. The discovered role of the protection of series-capacitors in SSR not only enables the prediction of the SSR-generated harmonics but it can also be used for the timely detection of an SSR event to avoid system disruption and sudden loss of a bulk generation. The large-signal impedance-based prediction of SSR-generated harmonics in DFIG-based wind and hydro generators is demonstrated using numerical simulations of a 2.5-MW, 690-V DFIG supplying to a series-compensated transmission line.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Coupled memristor devices to enable feedback control and sensing of micro/nanoelectromechanical actuator and sensors

A MEMS apparatus with dynamic displacement control includes a MEMS parallel plate capacitor integrated with one or more memristors in a series configuration wherein a displacement is observable as a function of memristance, such that an upper electrode position is capable of being interpreted in a form of a resistance rather than a capacitance. The current is limited by said MEMS parallel plate capacitor restricting a change in the resistance of the memristor(s). The memristor(s) can be employed in some embodiments a sensor element to improve a MEMS operation range.

42 ENGINEERING↗

Bi-triaxial photoconductive switch module

Methods, systems, and devices describe bi-triaxial photoconductive switch modules that that eliminate the need for external DC blocking capacitors, while providing a highly compact structure that can produce bipolar output waveforms conducive to feeding to radio-frequency (RF) devices, such as antennas. Some implementations of the disclosed bi-triaxial photoconductive switch modules utilize unified cast-in-place capacitors that can be designed with an appropriate geometry, volume and orientation to provide desired energy storage capacity while eliminating or reducing parasitics.

42 ENGINEERING↗

Additive Manufacturing of Frequency-Agile W-Band Packaging

Abstract —In this paper we demonstrate a fully additively manufactured packaged W-band amplifier with integrated bypass capacitors. This package was fabricated using a chip-first approach and aerosol jet printing. Package substrates (dielectrics), conductors and interconnects are printed around a bare die attached to a carrier. This package uses shaped ramp interconnects, allowing for frequency agnostic package performance of the interconnect with no impedance discontinuity, within the physical limits of the printer. High dielectric constant thin films of a polymer-matrix nanocomposite for bypass capacitors were printed using multi-material aerosol jet printing. The maximum measured packaged gain is 14.9 dB in the W-band, compared to the maximum bare die gain of 15.5 dB in the same frequency range. From 75 - 92 GHz, the average package loss is 1.1 dB including 3 mm transmission line, interconnects, and a GSG launch structure correlating to an average loss of 0.37 dB/mm.

Additive manufacturing, aerosol jet printing, hete↗

Modular, multi-channel, interleaved power converters

A multi-phase power converter includes two or more multi-phase, bi-directional, multi-level, switching power converter subcircuits, connected in parallel at respective AC and DC sides, so as to provide a multi-channel, bi-directional, multi-level configuration. The AC sides of the switching converter subcircuits are directly coupled to one another and to a multi-phase AC input via series interface reactors, and the DC sides of the switching converter subcircuits are directly connected to one another and to a common split-capacitor bank at each level of the multi-level outputs of the switching converter subcircuits. A control circuit is configured to selectively control one or more switching semiconductor devices in each of the switching converter subcircuits. In some embodiments, the control circuit includes a closed-loop zero-sequence controller and a zero-sequence generator configured to eliminate circulating current among the switching converter subcircuits and to balance voltages across levels of the common split-capacitor bank.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Metal chalcogenides for pseudocapacitive applications

A synthetic metal dichalcogenide having a highly defected nanocrystalline layered structure, wherein layer spacing is larger than in perfect crystals of the same material, wherein the defected structure provides access to interlayer crystals of the same material, and wherein the defected structure facilitates a pseudocapacitive charge storage mechanism. The metal dichalcogenide is receptive to intercalation of ions such as Li ions, Na ions, Mg ions, and Ca ions, and does not undergo a phase transition upon intercalation of Li ions, Na ions, Mg ions, or Ca ions. The metal dichalcogenide can be used, for example, as a component of an electrode that also includes a carbon derivative, and a binder, which are intermixed to form the electrode. The resultant composite electrode is highly porous and highly electronically conductive, and is suitable for use in devices such as symmetric capacitors, asymmetric capacitors, rocking chair batteries, and other devices.

25 ENERGY STORAGE↗

STRUCTURAL STABILITY OF MAGNETIC TUNNEL JUNCTION BASED MOLECULAR SPINTRONICS DEVICES (MTJMSD)

Harnessing the exotic properties of molecular level nanostructures to produce novel sensors, metamaterials, and futuristic computer devices can be technologically transformative. In addition, connecting the molecular nanostructures to ferromagnetic electrodes bring the unprecedented opportunity of making spin property based molecular devices. We have demonstrated that magnetic tunnel junction based molecular spintronics device (MTJMSD) approach to address numerous technological hurdles that have been inhibiting this field for decades. MTJMSD approach is based on producing a capacitor like a testbed where two metal electrodes are separated by an ultrathin insulator and subsequently bridging the molecule nanostructure across the insulator to transform a capacitor into a molecular device. Our prior work showed that MTJMSDs produced extremely intriguing phenomenon such as room temperature current suppression by six orders, spin photovoltaic effect, and evolution of new forms of magnetic metamaterials arising due to the interaction of the magnetic a molecule with two ferromagnetic thin films. However, making robust and reproducible electrical connections with exotic molecules with ferromagnetic electrodes is full of challenges and requires attention to MTJMSD structural stability. This paper focuses on MTJMSD stability by describing the overall fabrication protocol and the associated potential threat to reliability. MTJMSD is based on microfabrication methods such as (a) photolithography for patterning the ferromagnetic electrodes, (b) sputtering of metallic thin films and insulator, and (c) at the end electrochemical process for bridging the molecules between two ferromagnetic films separated by ~ 2nm insulating gap.

36 MATERIALS SCIENCE↗

Passive high-power-density grid interface device

A hybrid switched capacitor power converter for high-power applications is provided. The converter has a transistor-switched input-stage boost converter followed by a capacitor-and-diode ladder circuit. The converter is adapted to produce an output voltage of at least 5 kV at a power level of at least 0.5 kW. The ladder circuit includes one or more multi-stage rails.

Brocato, Robert W.↗