Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMMUNICATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Communication system for the Viking mission to Mars

The Viking communications system discussed comprises a UHF relay link and an S-band communication link. The design of both links was guided by the design of the mission itself and its constraints. The most important of these are: the available launch opportunities; the effect of interplanetary distances on the power and bandwidth of the S-band link; weight; reliability and survival in the Martian environment; the up-link command philosophy; the landing problem; and the requirements for planetary quarantine and cleanliness. The Viking mission, with its orbits and trajectories, launch and landing sequences is described and illustrated.

Brown, I.↗
NASA NTRS1974

Spacelab communications experiments

The Space Shuttle launched Spacelab is planned to provide the communications community with a platform to develop the technology required for NASA's and DOD's missions, and future domestic and international communications satellites in the 1980s. The Laboratory, with a weight carrying capability of 14,500 kg into a low-earth orbit and return to earth, is being planned to carry laser telescopes; large (greater-than 10 meter) deployable antennas; spaceborne receivers to map terrestrial noise sources in a variety of frequency bands, and other advanced technology applicable to the 1980s and 1990s. Spacelab will also facilitate ease of comparative testing between alternative or competing experiments, subsystems and components prior to a commitment to an automated satellite.

Ehrlich, E.↗
NASA NTRS1974

Carrier tracking, bit synchronization, and coding for S-band communications links

This paper presents the results of a study of the performance of Viterbi-decoded convolutional codes in the presence of nonideal carrier tracking and bit synchronization. A constraint length 7, rate 1/3 convolutional code and parameters suitable for the space shuttle coded communications links are used. Mathematical models are developed and theoretical and simulation results are obtained to determine the tracking and acquisition performance of the system. It is shown that the combined energy-to-noise degradation due to nonideal carrier tracking and bit synchronization over that required for the ideal tracking case can be held to less than 1.5 dB and that combined carrier tracking and bit timing can be acquired in only a few seconds for the parameters and operating ranges of the space shuttle coded communications links.

Odenwalder, J. P.↗
NASA NTRS1975

Analysis of synchronous digital-modulation schemes for satellite communication

The multipath communication channel for space communications is modeled as a multiplicative channel. This paper discusses the effects of multiplicative channel processes on the symbol error rate for quadrature modulation (QM) digital modulation schemes. An expression for the upper bound on the probability of error is derived and numerically evaluated. The results are compared with those obtained for additive channels.

Takhar, G. S.↗
NASA NTRS1975

Utility of space transportation system to space communication community: Executive summary

The space transportation system (STS) offers the opportunity for maintaining, and perhaps accelerating, growth of the space communication community. This new launch vehicle service, however, must be obtained at a cost lower than the current expandable launch vehicles cost. A cost competitive STS is defined for geostationary payloads. It is concluded that the STS will be useful to the space communication community, as well as to other geostationary satellite system users, if the proposed recommendations are adapted.

Bronstein, L. M.↗
NASA NTRS1975

Communications techniques and equipment: A compilation

This Compilation is devoted to equipment and techniques in the field of communications. It contains three sections. One section is on telemetry, including articles on radar and antennas. The second section describes techniques and equipment for coding and handling data. The third and final section includes descriptions of amplifiers, receivers, and other communications subsystems.

Source record↗
NASA NTRS1976

Computer-based communication in support of scientific and technical work

Results are reported of the first experiments for a computer conference management information system at the National Aeronautics and Space Administration. Between August 1975 and March 1976, two NASA projects with geographically separated participants (NASA scientists) used the PLANET computer conferencing system for portions of their work. The first project was a technology assessment of future transportation systems. The second project involved experiments with the Communication Technology Satellite. As part of this project, pre- and postlaunch operations were discussed in a computer conference. These conferences also provided the context for an analysis of the cost of computer conferencing. In particular, six cost components were identified: (1) terminal equipment, (2) communication with a network port, (3) network connection, (4) computer utilization, (5) data storage and (6) administrative overhead.

Vallee, J.↗
NASA NTRS1975

Availability of a communications satellite - Requirement and feasibility

An estimated 45 communications satellites will be in geostationary orbit in the 1980s. Based on past history, half of the subsystem failures will be due to design failures. Methods now used to achieve present availabilities are summarized in this paper. To increase the availability of a single satellite to 99.99%, new techniques are needed; several possibilities are suggested herein. New developments, including nickel-hydrogen batteries, magnetic bearings, and solid-state amplifiers, are possible solutions to long standing problem areas in communications satellites. Launching a satellite two or three years before the system is needed is one way to reduce design failures in subsequent satellites. Diversity of manufacture can be used to obtain the maximum advantage from redundant elements. Finally, unmanned module exchange at geostationary orbit has been shown to be technically feasible.

Gordon, G. D.↗
NASA NTRS1976

Basic limits on protocol information in data communications networks

The paper considers basic limitations on the amount of protocol information that must be transmitted in a data communication network to keep track of source and receiver addresses and of the starting and stopping of messages. Assuming Poisson message arrivals between each communicating source-receiver pair, a lower bound is found on the required protocol information for message. This lower bound is the sum of two terms, one for the message-length information, which depends only on the distribution of message lengths, and the other for the message-start information, which depends only on the product of the source-receiver pair arrival rate and the expected delay for transmitting the message. Two strategies are developed which, in the limit of large numbers of sources and receivers, almost meet the lower bound on protocol information.

Gallager, R. G.↗
NASA NTRS1976

Repairing a communications satellite on orbit

A review of past failures indicates that module exchange can satisfy most repair requirements of communications satellites. Emphasis is placed on the design of a serviceable communications satellites with 20 modules, on the development of an on-orbit servicer designed to remove failed modules from a body-stabilized spacecraft and to replace them with good modules, and on servicing operations. Benefits of servicing or repair include increased satellite availability, increased reliability, decreased life cycle costs, replacement of worn-out items, installation of updated equipment, and correction of design failures. The use of servicing instead of replacement could result in cost savings in excess of 40 percent. Significant savings are possible when the lifetime of a program is long relative to the satellite lifetime.

Gordon, G. D.↗
NASA NTRS1976

Remarks by Dr. James C. Fletcher at Conference on Satellite Communication and Public Service

The present status of communications satellites, together with the future goals and technology developments in use of public service, is assessed. Improvements in design during the last decade considerably cut the cost of their development and launching, and the systems carry information to millions of people on earth. The space shuttles will change the rules in design and make it possible for communications satellites to have multiple frequencies operating at high power.

Fletcher, J. C.↗
NASA NTRS1976

NASA/ESA CV-990 Spacelab simulation. Appendixes: C, data-handling: Planning and implementation; D, communications; E, mission documentation

Data handling, communications, and documentation aspects of the ASSESS mission are described. Most experiments provided their own data handling equipment, although some used the airborne computer for backup, and one experiment required real-time computations. Communications facilities were set up to simulate those to be provided between Spacelab and the ground, including a downlink TV system. Mission documentation was kept to a minimum and proved sufficient. Examples are given of the basic documents of the mission.

Reller, J. O., Jr.↗
NASA NTRS1976

Study to investigate and evaluate means of optimizing the Ku-band communication function for the space shuttle

The forward link of the overall Ku-band communication system consists of the ground- TDRS-orbiter communication path. Because the last segment of the link is directed towards a relatively low orbiting shuttle, a PN code is used to reduce the spectral density. A method is presented for incorporating code acquisition and tracking functions into the orbiter's Ku-band receiver. Optimization of a three channel multiplexing technique is described. The importance of Costas loop parameters to provide false lock immunity for the receiver, and the advantage of using a sinusoidal subcarrier waveform, rather than square wave, are discussed.

Simon, M. K.↗
NASA NTRS1976

Estimation of the demand for public services communications

Market analyses and economic studies are presented to support NASA planning for a communications satellite system to provide public services in health, education, mobile communications, data transfer, and teleconferencing.

Source record↗
NASA NTRS1977

A public service communications satellite user brochure

The capabilities of a proposed communications satellite that would be devoted to experiments and demonstrations of various public services is described. A Public Service Communications Satellite study was undertaken at the NASA Goddard Space Flight Center (GSFC) to define the problems and opportunities of a renewed NASA role and the form such NASA involvement should take. The concept that has evolved has resulted from careful consideration of experiments that were already undertaken on existing satellites.

Source record↗
NASA NTRS1977

Wideband heterodyne receiver for laser communication system

A heterodyne receiver for laser communication is described which includes a front end having a cooled photomixer contained in a hermetically sealed spaced quality housing designed for wide bandwidth transmission. The photomixer is coupled through a wideband preamplifier to the receiver back end which includes a frequency tracking network and demodulating equipment. The receiver is capable of tracking a Doppler frequency shift of 750 MHz, positive or negative, and has an instantaneous intermediate frequency information bandwidth of 400 MHz. The receiver system is also capable of operating over a wide temperature range and is designed to be suitable for use in outer space communication.

Flattau, T.↗
NASA NTRS1977

Early performance of the 12-GHz, 200-watt transmitter experiment package in the communications technology satellite

Measured performance characteristics of the transmitter experiment package (TEP) aboard the Communications Technology Satellite for the first 90 operating days in orbit are presented. The TEP consists of a nominal 200-watt output stage tube (OST), a supporting power processing system (PPS), and a variable-conductance heat pipe system (VCHPS). The OST, a traveling-wave tube augmented with a 10-stage depressed collector, has an overall saturated average efficiency of 51.5 percent and an average saturated radiofrequency (RF) output power at center-band frequency of 240 watts. The PPS operated with a measured efficiency of 86.5 percent to 88.5 percent. The VCHPS, using three pipes to conduct heat from the PPS and the body of the OST to a 52-centimeter by 124-centimeter (20.5-in. by 48.75-in.) radiator fin, maintained by the PPS baseplate temperature below 50 C for all operating conditions. The TEP performance characteristics presented include frequency response, RF output power, efficiency, and distortions. Communications characteristics were evaluated by using both video and audio modulated signals.

Source record↗
NASA NTRS1976

Characterization of the CTS 12 and 14 GHz communications links - Preliminary measurements and evaluation

The Communications Link Characterization Experiment is designed to characterize the radio frequency links of the Communications Technology Satellite. The experiment is twofold: (1) it will study the natural characteristics in the CTS frequency bands (14 GHz uplink, and 12 GHz downlink) including attenuation and signal degradation due primarily to absorption and scattering induced by precipitation, and (2) it will perform environmental measurements for the characterization of man-made, earth-based signals which could interfere with the uplink frequency bands of the satellite.

Ippolito, L. J.↗