Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

AN AXISYMMETRIC HYDRODYNAMICAL MODEL FOR THE TORUS WIND IN ACTIVE GALACTIC NUCLEUS. III. SPECTRA FROM THREE-DIMENSIONAL RADIATION TRANSFER CALCULATIONS

We calculate a series of synthetic X-ray spectra from outflows originating from the obscuring torus in active galactic nuclei (AGNs). Such modeling includes 2.5-dimensional hydrodynamical simulations of an X-ray excited torus wind, including the effects of X-ray heating, ionization, and radiation pressure. Three-dimensional radiation transfer calculations are performed in the three-dimensional Sobolev approximation. Synthetic X-ray line spectra and individual profiles of several strong lines are shown at different inclination angles, observing times, and for different characteristics of the torus. Our calculations show that rich synthetic warm absorber spectra from three-dimensional modeling are typically observed at a larger range of inclinations than was previously inferred from simple analysis of the transmitted spectra. In general, our results are supportive of warm absorber models based on the hypothesis of an 'X-ray excited funnel flow' and are consistent with characteristics of such flows inferred from observations of warm absorbers from Seyfert 1 galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

An Improved Coefficient Calculator for the California Energy Commission 6 Parameter Photovoltaic Module Model

This paper describes an improved algorithm for calculating the six parameters required by the California Energy Commission (CEC) photovoltaic (PV) Calculator module model. Rebate applications in California require results from the CEC PV model, and thus depend on an up-to-date database of module characteristics. Currently, adding new modules to the database requires calculating operational coefficients using a general purpose equation solver - a cumbersome process for the 300+ modules added on average every month. The combination of empirical regressions and heuristic methods presented herein achieve automated convergence for 99.87% of the 5487 modules in the CEC database and greatly enhance the accuracy and efficiency by which new modules can be characterized and approved for use. The added robustness also permits general purpose use of the CEC/6 parameter module model by modelers and system analysts when standard module specifications are known, even if the module does not exist in a preprocessed database.

14 SOLAR ENERGY↗

"K-Effective of the World" and Other Concerns for Monte Carlo Eigenvalue Calculations

Monte Carlo methods have been used to compute k eff and the fundamental model eigenfunction of critical systems since the 1950s. Despite the sophistication of today's Monte Carlo codes for representing realistic geometry and physics interactions, correct results can be obtained in criticality problems only if users pay attention to source convergence in the Monte Carlo iterations and to running a sufficient number of neutron histories to adequately sample all significant regions of the problem. Recommended best practices for criticality calculations are reviewed and applied to several practical problems for nuclear reactors and criticality safety, including the "K-effective of the World" problem. Numerical results illustrate the concerns about convergence and bias. The general conclusion is that with today's high-performance computers, improved understanding of the theory, new tools for diagnosing convergence (e.g., Shannon entropy of the fission distribution), and clear practical guidance for performing calculations, practitioners will have a greater degree of confidence than ever of obtaining correct results for Monte Carlo criticality calculations.

61 RADIATION PROTECTION AND DOSIMETRY↗

Baseline CGMF Calculations for Pu Isotopes

Updates were made to CGMF to run neutron-induced fission calculations on Pu isotopes of A =238, 239, 240, 241, and 242 (the release version of CGMF can calculate 239,241 Pu(n,f) and 238,240,242 Pu(sf) only). Here, we show the baseline calculations from CGMF for these neutron-induced fission reactions, including updates made for total kinetic energy systematics and fission barriers fit to be more consistent with the neutron-induced fission cross section.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

TASK 2.5.4 DEVELOPMENT OF AN ENERGY SAVINGS CALCULATOR

California s major energy utilities and the California Energy Commission (CEC) are seeking to allocate capital that yields the greatest return on investment for energy infrastructure that meets any part of the need for reliable supplies of energy. The utilities are keenly interested in knowing the amount of electrical energy savings that would occur if cool roof color materials are adopted in the building market. To meet this need the Oak Ridge National Laboratory and the Lawrence Berkeley National Laboratory (LBNL) have been collaborating on a Public Interest Energy Research (PIER) project to develop an industry-consensus energy-savings calculator. The task was coordinated with an ongoing effort supported by the DOE to develop one calculator to achieve both the DOE and the EPA objectives for deployment of cool roof products. Recent emphasis on domestic building energy use has made the work a top priority by the Department of Energy s (DOE) Building Technologies Program. The Roof Savings Calculator (RSC) tool is designed to help building owners, manufacturers, distributors, contractors and practitioners easily run complex simulations. The latest web technologies and usability design were employed to provide an easy input interface to an annual simulation of hour-by-hour, whole-building performance using the world-class simulation tools DOE-2.1E and AtticSim. Building defaults were assigned based on the best available statistical evidence and can provide energy and cost savings after the user selects nothing more than the building location. A key goal for the tool is to promote the energy benefits of cool color tile, metal and asphalt shingle roof products and other energy saving systems. The RSC tool focuses on applications for the roof and attic; however, the code conducts a whole building simulation that puts the energy and heat flows of the roof and attic into the perspective of the whole house. An annual simulation runs in about 30 sec. In addition to cool reflective roofs, the RSC tool will simulate high- medium- and low-slope roofs, and has a custom selection for the user whose house has a unique inclination. There is an option for above sheathing ventilation, which is prevalent in tile and stone-coated metal roof assemblies. The tool also accommodates the effects of radiant barriers and low-emittance surfaces in the inclined air space above the sheathing. The practitioner can select to have air-conditioning ducts either in the conditioned space or in the attic. If in the attic, the user can select one of three air leakage options. Option 1 is an inspected duct having 4% leakage and code level of duct insulation; option 2 is a poorly insulated duct having 14% air leakage; and option 3 is a custom leakage rate specified by the user. The practitioner can setup multiple layers of ceiling insulation. AtticSim is benchmarked against the field data acquired for Ft. Irwin located near Barstow, CA, first as a standalone simulation program and then again integrated within the DOE-2.1E program. The standalone benchmark was very useful to determining how well AtticSim replicates the building physics of an attic. The coupled benchmark was useful to verify that the DOE-2.1E/AtticSim code is modeling correctly the dynamic relationship between the attic and the occupied space below, as well as the interactions between the attic and the HVAC system, in particular when the ducts are located in the attic.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A Review of Monte Carlo Criticality Calculations - Convergence, Bias, Statistics

Monte Carlo criticality calculations have been performed for over 50 years for reactor physics and criticality safety applications. With today's faster computers, these calculations are being carried out to greater precision (smaller uncertainties) in k eff ; and detailed distributions of power and reaction rates are being computed routinely. This paper provides a review of the fundamental theory of Monte Carlo criticality calculations, with guidance on practical methods for: (1) assuring convergence of both k eff and the source distribution, (2) minimizing the bias in k eff and reaction rate distributions, and (3) dealing with the underprediction bias in uncertainties for k eff and reaction rate distributions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Two-Dimensional Fem Code for Impedance Calculation in High Frequency Domain

A new method, using the parabolic equation (PE), for the calculation of both high-frequency impedances of small-angle taper (or collimator) is developed in [1]. One of the most important advantages of the PE approach is that it eliminates the spatial scale of the small wavelength from the problem. As a result, only coarser spatial meshes are needed in calculating the numerical solution of the PE. We developed a new code based on Finite Element Method (FEM) which can handle arbitrary profile of a transition and speed up the calculation by orders of magnitude. As a first step, we completed and benchmarked a two-dimensional code. It can be upgraded to three-dimensional geometry.

43 PARTICLE ACCELERATORS↗

The effects of bias, drift, and trends in calculating anomalies for evaluating skill of seasonal-to-decadal initialized climate predictions

In initialized seasonal to decadal (S2D) predictions, model hindcasts rapidly drift away from the initial observed state and converge toward a preferred state characterized by systematic error, or bias. Bias and drift are among the greatest challenges facing initialized prediction today. Differences in trends between initial states and drifted states, combined with bias and drift, introduce complexities in calculating anomalies to assess skill of initialized predictions. We examine several methods of calculating anomalies using the Decadal Prediction Large Ensemble (DPLE) using the Community Earth System Model (CESM) initialized hindcasts and focus on Pacific and Atlantic SSTs to illustrate issues with anomaly calculations. Three methods of computing anomalies, one as differences from a long term model climatology, another as bias-adjusted differences from the previous 15 year average from observations, and a third as differences from the previous 15 year average from the model, are contrasted and each is shown to have limitations. For the first, trends in bias and drift introduce higher skill estimates earlier and later in the hindcast period due to the trends that contribute to skill. For the second, higher skill can be introduced in situations where low frequency variability in the observations is large compared to the hindcasts on timescales greater than 15 years, while lower skill can result if the predicted signal is small and the bias-correction itself produces a transition of SST anomalies to the opposite sign of those that are observed. The third method has somewhat lower skill compared to each of the others, but has less difficulties with not only the long term trends in the model climatology, but also with the unrealistic situational skill from using observations as a reference. However, the first 15 years of the hindcast period cannot be evaluated due to having to wait to accumulate the previous 15 year model climatology before the method can be applied. Here, the IPO transition in the 2014–2016 time frame from negative to positive (predicted by Meehl et al. in in Nat Commun, 10.1038/NCOMMS11718, 2016) did indeed verify using all three methods, though each provides somewhat different skill values as a result of the respective limitations. There is no clear best method, as all are roughly comparable, and each has its own set of limitations and caveats. However, all three methods show generally higher overall skill in the AMO region compared to the IPO region.

54 ENVIRONMENTAL SCIENCES↗

A new approach for the acceleration of large-scale serial quantum chemical calculations of docking complexes

A new approach to radical accelerate large-scale quantum chemical calculations of docking complexes, which require large computational times, is proposed. It takes into account the local nature of protein interaction with ligands and is based on a formation of special groups of atoms, which include the compactly located ligands and the protein atoms surrounding them. The procedure based on this approach allowed more than twice to reduce the time of a very resource-consuming calculation with respect to our previous high-speed semi-empirical method without a noticeable decrease in accuracy and provided a level of the time consumption appropriate for the large-scale serial calculations of such complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Summation of Parquet diagrams as an ab initio method in nuclear structure calculations

Research Highlights: > We present a Green's function based approach for doing ab initio nuclear structure calculations. > In particular the sum the subset of so-called Parquet diagrams. > Applying the theory to a simple but realistic model, results in good agreement with other ab initio methods. > This opens up for ab initio calculations for medium-heavy nuclei. - Abstract: In this work we discuss the summation of the Parquet class of diagrams within Green's function theory as a possible framework for ab initio nuclear structure calculations. The theory is presented and some numerical details are discussed, in particular the approximations employed. We apply the Parquet method to a simple model, and compare our results with those from an exact solution. The main conclusion is that even at the level of approximation presented here, the results shows good agreement with other comparable ab initio approaches.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large-scale GW calculations on pre-exascale HPC systems

The ab initio GW approach is a rigorous Green’s-function-based framework that can be employed to compute electronic excitation properties of a wide variety of materials such as extended systems, molecules, as well as confined and nanostructured materials with a very satisfactory accuracy. However, GW calculations on complex systems are often hindered by the high computational cost associated with the method. Here, in this study, we demonstrate how to significantly speedup GW calculations with a novel algorithm for the computationally intense kernel based on a non-blocking chunked cyclic communication scheme that minimizes latency in MPI messages, allows for overlapping of communication and computation, and improves cache usage in matrix multiplication operations. The optimized version of the code, implemented in the BerkeleyGW software package, is capable of scaling well to the full Cori computer at NERSC (Cray XC40) and achieves over 11 Peta FLOP/s of sustained performance. We showcase our work by performing large-scale GW calculations of defect structures on silicon, which require simulation cells containing over 1700 atoms, and which can now be efficiently executed in just a few minutes on large pre-exascale high-performance computing systems.

97 MATHEMATICS AND COMPUTING↗

Partition of unity finite element method for quantum mechanical materials calculations

The current state of the art for large-scale quantum-mechanical simulations is the planewave (PW) pseudopotential method, as implemented in codes such as VASP, ABINIT, and many others. However, since the PW method uses a global Fourier basis, with strictly uniform resolution at all points in space, it suffers from substantial inefficiencies in calculations involving atoms with localized states, such as first-row and transition-metal atoms, and requires significant nonlocal communications, which limit parallel efficiency. Real-space methods such as finite-differences (FD) and finite-elements (FE) have partially addressed both resolution and parallel-communications issues but have been plagued by one key disadvantage relative to PW: excessive number of degrees of freedom (basis functions) needed to achieve the required accuracies. In this paper, we present a real-space partition of unity finite element (PUFE) method to solve the Kohn–Sham equations of density functional theory. In the PUFE method, we build the known atomic physics into the solution process using partition-of-unity enrichment techniques in finite element analysis. The method developed herein is completely general, applicable to metals and insulators alike, and particularly efficient for deep, localized potentials, as occur in calculations at extreme conditions of pressure and temperature. Full self-consistent Kohn–Sham calculations are presented for LiH, involving light atoms, and CeAl, involving heavy atoms with large numbers of atomic-orbital enrichments. We find that the new PUFE approach attains the required accuracies with substantially fewer degrees of freedom, typically by an order of magnitude or more, than the PW method. As a result, we compute the equation of state of LiH and show that the computed lattice constant and bulk modulus are in excellent agreement with reference PW results, while requiring an order of magnitude fewer degrees of freedom to obtain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An improved method for direct incident solar radiation calculation from hourly solar insolation data in building energy simulation

Solar radiation considerably influences the energy consumption of buildings and the power production of building integrated photovoltaic (BIPV) systems. Hourly solar insolation (Wh/m 2 ), represented as the amount of solar irradiance collected on the ground during a 1-h period, is the most common solar radiation data available and widely used in weather files applied in building energy modeling programs (BEMPs). Because the solar beam and position vary over time, the use of hourly insolation data as the input might result in errors in the estimation of the direct incident solar radiation on a particular surface. In this study, methods used in BEMPs for direct incident solar radiation calculations are first analyzed, and an improved method adopting a new algorithm for estimating the solar irradiance is proposed. Furthermore, the algorithm assumes that the solar irradiance changes linearly within a 1-h period and can be estimated based on the solar irradiance at the half clock and slope. The collected direct normal solar irradiance data of 2016 from eight solar radiation stations in China were used to demonstrate the proposed method and evaluate its performance by comparing the results with those from three conventional methods used in BEMPs along with the ground truth measurements. In addition, in this study, factors affecting the accuracy of the calculation results are explored. The results of the estimated direct incident solar radiation show that the proposed method achieves the best accuracy, followed by the methods used in DOE-2, EnergyPlus, and DeST. The proposed method guarantees that the hourly direct solar insolation will remain the same and reflects the variation in the direct solar irradiance across a 1-h time frame. The proposed method can be adopted in BEMPs to improve the accuracy of the solar radiation calculation, thereby improving the accuracy of the simulated building performance and the BIPV production.

14 SOLAR ENERGY↗

Calculation of boron-isotope fractionation between B(OH)(3)(aq) and B(OH)(4)(-)(aq)

Density functional and correlated molecular orbital calculations (MP2) are carried out on B(OH)3-nH2O clusters (n = 0, 6,32), and B(OH)-4.nH20 (n = 0, 8, 11, 32) to estimate the equilibrium distribution of 10B and 11B isotopes between boric acid and borate in aqueous solution. For the large 32-water clusters, multiple conformations are generated from ab initio molecular dynamics simulations to account for the effect of solvent fluctuations on the isotopic fractionation. We provide an extrapolated value of the equilibrium constant x34 for the isotope exchange reaction 10B(OH)3(aq) + 11B(OH)-4 (aq) = 11B(OH)3(aq) + 11B(OH)-4 (aq) of 1.026-1.028 near the MP2 complete basis set limit with 32 explicit waters of solvation. With some exchange-correlation functionals we find potentially important contributions from a tetrahedral neutral B(OH)3.H2O Lewis acid-base complex. The extrapolations presented here suggest that DFT calculations give a value for 103lnx34 about 15% higher than the MP2 calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

VNb{sub 9}O{sub 25-{delta}}-Synthesis, electrical conducting behaviour and density functional theory (DFT) calculation

In order to investigate the influence of the oxygen partial pressure (p(O{sub 2})) on the electrical conductivity, VNb{sub 9}O{sub 25} was prepared by thermal decomposition of freeze-dried oxalate precursors and by a solid state reaction of V{sub 2}O{sub 5}/Nb{sub 2}O{sub 5} mixtures. The samples were characterised by X-ray diffraction, grain size analysis and scanning electron microscopy (SEM). The electrical conductivity of the n-type semiconductor VNb{sub 9}O{sub 25-{delta}} can be interpreted as an activated hopping process with a preferred localisation of charge carriers at V(IV) centres. The electronic structure of VNb{sub 9}O{sub 25-{delta}} was calculated within the framework of the local density approximation (LDA) to DFT. Partial reduction of V(V) centres causes localised vanadium states to appear inside the band gap. The calculated activation energy values are in good agreement with the experimental ones. - Graphical Abstract: The electrical conductivity of the n-type semiconductor VNb{sub 9}O{sub 25-{delta}} can be interpreted as an activated hopping process with a preferred localisation of charge carriers at V(IV) centres. The electronic structure of VNb{sub 9}O{sub 25-{delta}} was calculated within the framework of the local density approximation (LDA) to DFT. The partial reduction of V(V) centres causes localised vanadium states to appear inside the band gap.

36 MATERIALS SCIENCE↗

Ferromagnetism and antiferromagnetism coexistence in SrRu{sub 1-x}Mn{sub x}O{sub 3}: Density functional calculation

We have calculated the electronic structure of SrRu{sub 1-x}Mn{sub x}O{sub 3} using the full potential linearized augmented plane wave method by LSDA and LSDA+U. The antiparallel alignment between the Mn and Ru ions are consistent with the competition between ferromagnetism and antiferromagnetism in the low Mn-doped polycrystalline samples. This is in contrast to the appearance of quantum critical point and FM and AFM transitions in the single crystal measurement. Our results show that the discrepancy between different experimental phase diagrams is related to the conditions of sample preparation and also the difference between the degree of magnetic interactions between the Mn and Ru moments. The DOS and the calculated Mn magnetic moment is similar to the magnetic moment of a purely ionic compound with d{sup 3} configuration. The AFM state has band gap of 1.2 eV at the Fermi energy predicting an insulating behavior. -- Graphical abstract: The antiparallel alignment between the Mn and Ru ions are consistent with the competition between ferromagnetism and antiferromagnetism with the formation of a spin glass phase. We have calculated the electronic structure of SrRu{sub 1-x}Mn{sub x}O{sub 3} using the full potential linearized augmented plane wave method by LSDA and LSDA+U in the range of both low and high Mn-doping for parallel and antiparallel alignments of Ru and Mn moments. In the low Mn-doped polycrystalline samples with tetragonal structure, the AFM hybridization between Mn and the Ru host lattice strongly favors alignment of the Ru moments, and provides an explanation for retaining of high Curie temperature of SrRuO{sub 3} with Mn substitution. Display Omitted Research highlights: {yields} For the low Mn-doping the AFM coupling between Mn and Ru becomes stable. {yields} Results are consistent with the QCP between FM and AFM transitions in single crystals. {yields} In high Mn-doping, electron correlation is important in predicting the insulating behavior.

36 MATERIALS SCIENCE↗

The complex metal-rich boride Ti{sub 1+x}Rh{sub 2-x+y}Ir{sub 3-y}B{sub 3} (x=0.68, y=1.06) with a new structure type containing B{sub 4} zigzag fragments: Synthesis, crystal chemistry and theoretical calculations

Polycrystalline samples and single crystals of the new complex boride Ti{sub 1+x}Rh{sub 2-x+y}Ir{sub 3-y}B{sub 3} (x=0.68; y=1.06) were synthesized by arc-melting the elements in a water-cooled copper crucible under an argon atmosphere and characterized by X-Ray diffraction as well as EDX measurements. The crystal structure was refined on the basis of single crystal data. The new phase, which represents a new structure type containing trans zigzag B{sub 4} fragments as well as isolated boron atoms crystallizes in the orthorhombic space group Pbam (Nr. 55) with the lattice parameters a=8.620(1) A, b=14.995(2) A and c=3.234(1) A. First-principles density functional theory calculations using the Vienna ab-initio simulation package (VASP) were performed on an appropriate structural model (using a supercell approach) and the experimental crystallographic data could be reproduced accurately. Based on this model, the density of states and crystal orbital Hamilton population (for bonding analysis) were calculated, using the linear muffin-tin orbital atomic sphere approximation (LMTO-ASA) method. According to these calculations, this metal-rich compound should be metallic, as expected. Furthermore, very strong boron-boron interactions are observed in the trans zigzag B{sub 4} fragment, which induce a clear differentiation of two types of metal-boron contacts with different strength. The observed three-dimensional metal-metal interaction is in good agreement with the predicted metallic behavior. - graphical abstract: The structure of Ti{sub 1.68(2)}Rh{sub 2.38(6)}Ir{sub 1.94(4)} B{sub 3}, a new structure type containing planar trans zigzag B{sub 4} units, is another example which illustrates the tendency of metal-rich borides to form B-B bonds with increasing boron content. Beside the B{sub 4} fragment it exhibits one-dimensional chains of titanium atoms and hold one-dimensional strings of face-sharing empty tetrahedral and square pyramidal clusters (see figure). Highlights: Black-Right-Pointing-Pointer Synthesis of a new metal-rich complex boride. Black-Right-Pointing-Pointer New structure type containing isolated boron and trans zigzag B{sub 4} units. Black-Right-Pointing-Pointer Crystallographic parameters and bond length well reproduced by theory. Black-Right-Pointing-Pointer Strong boron-boron and metal-boron interactions responsible for structural stability. Black-Right-Pointing-Pointer Three-dimensional metallic network responsible for metallic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles calculation of lattice distortions in four single phase high entropy alloys with experimental validation

Exceptional properties of high entropy alloys (HEAs) are attributed to the disordered random solid solution of multiple alloying elements. Despite numerous studies, the fundamental understanding at the electronic and atomic levels is still missing. We report a comparative study of four fcc HEAs of NiFeCoCr and NiFeCoCrX (X = Mn, Cu, or Pd) based on ab initio calculations using large supercells with 500 atoms in equal composition. After fully optimizing their structures using the VASP package, their electronic structure, interatomic bonding, partial charge distribution, and mechanical properties are calculated and compared, revealing the intricate interdependence among them. A novel parameter based on the quantum mechanical metric for internal cohesion, the total bond order density (TBOD), is used to interpret the calculated properties. The highest TBOD is found in Cantor alloy NiFeCoCrMn but lower in NiFeCoCrPd. The atomic radii vary depending on their local chemical environment. The resulting lattice distortions is validated experimentally in NiFeCoCrMn and NiFeCoCrPd. Moreover, modeling of Cu and Pd clustering in the supercell shows they have lower total energy in agreement with the observation of Cu-enhanced nano-participates in NiFeCoCrCu and Pd-induced concentration wave in NiFeCoCrPd HEAs.

36 MATERIALS SCIENCE↗