Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Intervalley separation in the conduction band of InGaAs measured by terahertz excitation spectroscopy

Spectral dependencies of terahertz radiation from the femtosecond laser-illuminated surfaces of Ga{sub x}In{sub 1-x}As (x=1, 0.8, and 0.47) have been investigated experimentally at high optical fluencies and laser wavelengths ranging from 600 to 800 nm. The terahertz pulse amplitude increased with the increasing laser photon energy due to larger excess energies of photoexcited electrons and more efficient spatial separation of electrons and holes at the illuminated surface. This increase was stopped with the onset of electron transitions to subsidiary conduction band valleys. Analysis of these experiments was used for evaluating the energy positions of the X and L conduction band valleys in Ga{sub x}In{sub 1-x}As alloys as a function of their composition.

36 MATERIALS SCIENCE↗

Colossal photostructural changes in chalcogenide glasses: Athermal photoinduced polymerization in As{sub x}S{sub 100-x} bulk glasses revealed by near-bandgap Raman scattering

Near-bandgap Raman scattering was used to induce and study photostructural changes in As{sub x}S{sub 100-x} bulk glasses (5{<=}x{sub As}{<=}40) revealing a new photoinduced polymerization effect. Raman spectra were recorded also in off-resonant conditions allowing for a detailed comparison between the 'equilibrium' glass structure and the metastable one induced by illumination. It is shown that in S-rich glasses, structural changes involve the athermal scission of S{sub 8} rings and their polymerization to S{sub n} chains. The fraction of bonds involved in this effect is surprisingly high, being one order of magnitude higher than the corresponding fractions reported up to now in photostructural studies in chalcogenide glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain relaxation properties of InAs{sub y}P{sub 1-y} metamorphic materials grown on InP substrates

The strain relaxation mechanism and defect properties of compositionally step-graded InAs{sub y}P{sub 1-y} buffers grown by molecular beam epitaxy on InP have been investigated. InAsP layers having lattice misfits ranging from 1% to 1.4% with respect to InP, as well as subsequently grown lattice matched In{sub 0.69}Ga{sub 0.31}As overlayers on the metamorphic buffers were explored on both (100) and 2 deg. offcut (100) InP substrates. The metamorphic graded buffers revealed very efficient relaxation coupled with low threading dislocation densities on the order of (1-2)x10{sup 6} cm{sup -2} for the range of misfit values explored here. A detailed analysis via high resolution x-ray diffraction revealed that the strain relaxed symmetrically, with equivalent numbers of {alpha} and {beta} dislocations, and to greater than 90% for all cases, regardless of substrate offcut. Further analysis showed the relaxation to always be glide limited in these materials when grown on a graded buffer compared to a single step layer. The threading dislocation density was observed by plan-view transmission electron microscopy to be constant for the range of misfit values studied here in the top layer of the graded structures, which is attributed to the very efficient use of residual dislocations and the dominance of dislocation glide over nucleation in these graded anion metamorphic buffers, suggesting great promise for metamorphic devices with lattice constants greater than that of InP to be enabled by InAsP metamorphic structures on InP.

36 MATERIALS SCIENCE↗

Ultrashort-period lateral composition modulation in TlInGaAsN/TlInP structures

We prepared TlInGaAsN/TlInP quantum well structures using gas source molecular-beam epitaxy and characterized them by means of transmission electron microscopy and scanning transmission electron microscopy. It was found that naturally formed vertical quantum wells, so-called lateral composition modulation (LCM), with a periodicity of {approx}1 nm are formed in TlInGaAsN layers. We discuss their formation process using a simple kinetic Ising model for layer-by-layer growth, and point out that the formation of ultrashort-period LCM is a universal phenomenon in most of epitaxially grown III-V semiconductor alloys.

36 MATERIALS SCIENCE↗

Neutron transfer reactions: Surrogates for neutron capture for basic and applied nuclear science

Neutron capture reactions on unstable nuclei are important for both basic and applied nuclear science. A program has been developed at the Holifield Radioactive Ion Beam Facility at Oak Ridge National Laboratory to study single-neutron transfer (d,p) reactions with rare isotope beams to provide information on neutron-induced reactions on unstable nuclei. Results from (d,p) studies on {sup 130,132}Sn, {sup 134}Te and {sup 75}As are discussed.

43 PARTICLE ACCELERATORS↗

A Priori Method of Using Photon Activation Analysis to Determine Unknown Trace Element Concentrations in NIST Standards

Photon activation analysis detected elements in two NIST standards that did not have reported concentration values. A method is currently being developed to infer these concentrations by using scaling parameters and the appropriate known quantities within the NIST standard itself. Scaling parameters include: threshold, peak and endpoint energies; photo-nuclear cross sections for specific isotopes; Bremstrahlung spectrum; target thickness; and photon flux. Photo-nuclear cross sections and energies from the unknown elements must also be known. With these quantities, the same integral was performed for both the known and unknown elements resulting in an inference of the concentration of the un-reported element based on the reported value. Since Rb and Mn were elements that were reported in the standards, and because they had well-identified peaks, they were used as the standards of inference to determine concentrations of the unreported elements of As, I, Nb, Y, and Zr. This method was tested by choosing other known elements within the standards and inferring a value based on the stated procedure. The reported value of Mn in the first NIST standard was 403{+-}15 ppm and the reported value of Ca in the second NIST standard was 87000 ppm (no reported uncertainty). The inferred concentrations were 370{+-}23 ppm and 80200{+-}8700 ppm respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scanning Hall probe microscopy of a diluted magnetic semiconductor

We have measured the micromagnetic properties of a diluted magnetic semiconductor as a function of temperature and applied field with a scanning Hall probe microscope built in our laboratory. The design philosophy for this microscope and some details are described. The samples analyzed in this work are Ga{sub 0.94}Mn{sub 0.06}As films grown by molecular beam epitaxy. We find that the magnetic domains are 2-4 mum wide and fairly stable with temperature. Magnetic clusters are observed above T{sub C}, which we ascribe to MnAs defects too small and sparse to be detected by a superconducting quantum interference device magnetometer.

36 MATERIALS SCIENCE↗

Photoluminescence study on heavily donor and acceptor impurity doped GaAs layers grown by molecular-beam epitaxy

Gallium arsenide layers doped with high concentrations of Be and Si by molecular-beam epitaxy are studied by photoluminescence (PL) spectroscopy. PL peaks from doped layers are observed at energies significantly lower than the band-gap of GaAs. The growth and doping conditions suggest that the origin of these peaks is different from that of low energy PL peaks, which were observed in earlier studies and attributed to impurity-vacancy complexes. The dependence of the peak energy on the temperature and the annealing is found to differ from that of the peaks attributed to impurity-vacancy complexes. On the basis of these observations, it is suggested that the low energy peaks are attributed to short range ordered arrangements of impurity ions. This possibility is examined by calculations of the PL spectra with models of pairs of acceptor and donor delta-doped layers and PL experiments of a superlattice of pairs of Be and Si delta-doped layers.

36 MATERIALS SCIENCE↗

Quantitative compositional analysis and strain study of InAs quantum wires with InGaAlAs barrier layers

Quantitative compositional analysis of InAs quantum wires deposited between In{sub 0.53}Ga{sub 0.37}Al{sub 0.1}As barrier layers grown on InP substrates was performed by electron energy loss spectrometry and energy dispersive x-ray spectrometry. An indium-rich region in the center of the wire, with decreasing indium concentration toward the interface with the barrier layers, was observed from indium concentration maps for individual quantum wires. 'Stripelike' contrast modulation was observed in diffraction contrast transmission electron microscope images of the In{sub 0.53}Ga{sub 0.37}Al{sub 0.1}As barrier layer immediately above the quantum wires. The contrast originated from indium compositional modulations in the upper barrier layer as confirmed by electron energy loss spectrometry and the modulation is attributed to the presence of an inhomogeneous elastic strain field generated by the buried quantum wires. These results suggest that quantitative analysis of the composition and strain distributions at very high spatial resolution provides insights necessary to further model the physical properties and to understand the growth of these nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure and texture developments in multiple pulses excimer laser crystallization of GaAs thin films

In this paper, we observed and characterized changes in the microstructure and texture during recrystallization and grain growth in polycrystalline GaAs thin films using multiple pulses crystallization by a KrF excimer laser. Films of various thicknesses were studied to assess film thickness and laser energy density effects. In the low temperature domain corresponding to the partial melting regime, normal grain growth was observed. In the superlateral grain growth regime the increase in grain size was notable with grain sizes much greater than the film thickness. A bimodal grain size distribution emerged implying the onset of secondary grain growth. The change in grain size distribution, texture, and grain boundary texture were analyzed using scanning electron microscopy and electron backscatter diffraction. It was found that grain growth is accompanied by a strengthening in (001) texture, indicating that the grain growth phenomenon is strain energy driven. The experimental results are explained with theory of secondary grain growth in thin films.

36 MATERIALS SCIENCE↗

Neutron-irradiated Schottky diodes with self-assembled InAs quantum dots: Optical and electrical properties

The effect of neutron irradiation on optical and electrical properties of self-assembled InAs/GaAs quantum dots (QDs) is studied for neutron doses up to phi{sub n}=3x10{sup 14} cm{sup -2}. The QDs are embedded in n-type GaAs Schottky diodes grown by molecular beam epitaxy on GaAs(001). We observe an initial increase in QD photoluminescence followed by a decrease as a function of neutron irradiation. The increase in photoluminescence is attributed to a more effective carrier trapping and relaxation from the wetting layer into the QDs via radiation-induced defects. The losses of photoluminescence at higher neutron doses are caused by defects, which act as nonradiative recombination centers. The observed dependence of the photoluminescence on the laser excitation power can be explained with saturation effects. Deep level transient spectroscopy experiments reveal multiple overlapping electron traps. Furthermore, an enhanced introduction of defects in the QD layer is observed. Electrical characterization of the Schottky diodes via capacitance-voltage spectroscopy reveals that the doping condition in the diodes changes due to the introduction of defects. This fact has to be taken into account if QDs are used in electrical devices in radiation-harsh environments as it is shown by low-temperature deep level transient spectroscopy experiments on electron emission processes from QD levels.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Analytical description of the metal-assisted growth of III-V nanowires: Axial and radial growths

The growth of III-V nanowires from metal seed particles is described in an analytical manner within the framework of a material conservation model. Direct impingement of growth species on the particle, coupled to their diffusion from the sidewall and the substrate surface, are considered in the derivation of expressions for the time evolution of both axial and radial growths. Two regimes are distinguished: the structure originally grows in a purely axial manner until its length exceeds the diffusion length of adatoms incoming from the substrate, at which point sidewall nucleation is triggered, resulting in a shell expanding radially in the lower part of the wire. Factors that take into account the nonunity probability of inclusion of group III adatoms in the axially growing crystal are introduced. Moreover, a step-mediated growth is included to describe the axial evolution of the shell. The numerical values of the various parameters were assessed by fitting the model to experimental data on the morphology evolution of molecular-beam-epitaxy-grown GaAs and InAs nanowires.

36 MATERIALS SCIENCE↗

Lasing and polariton condensation: Two distinct transitions in GaAs microcavities with stress traps

We have used stress to create a harmonic potential for polaritons in GaAs microcavities and have previously reported that the polaritons undergo spontaneous coherence in the trap. In this paper we present results for both trapped conditions and resonant, nontrapped conditions in the same sample. We find that the results are qualitatively different with two distinct types of transitions. At low density in the trap, the polaritons remain in the strong coupling regime while going through the threshold for onset of coherence; at higher density, there is a different threshold behavior, which occurs with weak coupling and can be identified with lasing; this transition occurs both with and without a trap. The transition at lower density can therefore be identified as a type of nonequilibrium Bose-Einstein condensation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial, electrical, and spin-injection properties of epitaxial Co{sub 2}MnGa grown on GaAs(100)

The interfacial, electrical, and magnetic properties of the Heusler alloy Co{sub 2}MnGa grown epitaxially on GaAs(100) are presented with an emphasis on the use of this metal-semiconductor combination for a device that operates on the principles of spin-injection between the two materials. Through systematic growth optimization the stoichiometry in the bulk Co{sub 2}MnGa can be controlled to better than +-2%, although the interface is disordered and limits the spin-injection efficiency in a practical spintronic device irrespective of the half-metallic nature of the bulk metal. Molecular beam epitaxial growth was monitored in situ by reflection high energy electron diffraction and the bulk composition was measured ex situ with inductively coupled plasma optical emission spectroscopy. The Co{sub 2}MnGa L2{sub 1} cubic structure is strained below a thickness of 20 nm on GaAs(100) but relaxed in films thicker than 20 nm. Electrical measurements on the Co{sub 2}MnGa reveal general characteristics of a disordered electron system with insulating behavior for layer thicknesses <4 nm. Thicker layers show a negative magnetoresistance with extraordinary Hall effect constants up to 30 OMEGA T{sup -1}. Spin polarization transfer across the interface between Co{sub 2}MnGa and GaAs is approximately 6.4% at 5 K in the current of a GaAs p-i-n diode even with compositional disorder at the interface.

36 MATERIALS SCIENCE↗

Structural, magnetic, and transport properties of laser-annealed GaAs:Mn-H

We have investigated the effect of laser annealing on the structural, magnetic, and transport properties of hydrogenated Ga{sub 0.96}Mn{sub 0.04}As films. Irradiation with nanosecond laser pulses leads to significant recovery of hole-mediated ferromagnetism in these films. By tuning processing parameters such as laser fluence and number of pulses, one can control the electrical and magnetic properties--namely, resistivity, magnetic coercivity, and remnant magnetization--in the laser-activated region. Ion-beam analysis indicates that the structural integrity of the film is maintained upon hydrogenation and laser annealing with evidence for displacement of substitutional Mn ions toward interstitial sites due to hydrogen-complex formation. Laser annealing results in the relaxation of up to 50% of Mn atoms back to substitutional sites while the Curie temperature recovers to approx60% of the T{sub C} prior to hydrogenation. Subsequent thermal annealing results in full relocation of Mn atoms to substitutional sites, yet the T{sub C} remains pinned at approx60% of its original value, suggesting the formation of a defect complex involving substitutional Mn. Our numerical simulations elucidate the strong interplay between laser processing parameters and Mn-H dissociation.

36 MATERIALS SCIENCE↗

{sup 67}As-{sup 67}Se mirror pair spectroscopy

This work focus on the electromagnetic decay properties of the heaviest known mirror pair {sup 67}As and {sup 67}Se, produced in the fusion evaporation reaction {sup 32}S+{sup 40}Ca, with a E = 90 MeV beam provided by the ATLAS accelerator at Argonne National Laboratory. The high selectivity required to investigate these proton-rich nuclei was achieved with the concurrent employment of Gammasphere, Neutron-Shell, and Microball. The full array allowed to obtain the level scheme of the {sup 67}Se nucleus up to 5.56 MeV, and 5 new transitions were assigned to the known {sup 67}As level-scheme. The level spin and parities were assigned using the ADO analysis and symmetry arguments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Strain and magnetic anisotropy of as-grown and annealed Fe films on c(4x4) reconstructed GaAs (001) surface

Fe films with the different thicknesses were grown on c(4x4) reconstructed GaAs (001) surfaces at low temperature by molecular-beam epitaxy. Well-ordered bcc structural Fe epitaxial films are confirmed by x-ray diffraction patterns and high-resolution cross-sectional transmission electron microscopy images. A large lattice expansion perpendicular to the surface in Fe film is observed. In-plane uniaxial magnetic anisotropy is determined by the difference between magnetizing energy along [110] and [110] directions, and the constant of interfacial uniaxial magnetic anisotropy is calculated to be 1.02x10{sup -4} J m{sup -2}. We also find that magnetic anisotropy is not obviously influenced after in situ annealing, but in-plane strain is completely changed.

36 MATERIALS SCIENCE↗

Temperature dependent and time-resolved photoluminescence studies of InAs self-assembled quantum dots with InGaAs strain reducing layer structure

Four types of self-assembled InAs/GaAs quantum dots (QDs) were grown by molecular beam epitaxy and studied via temperature-dependent and time-resolved photoluminescence (PL) spectroscopy measurements. A thin InGaAs stain reducing layer (SRL) is adopted which extends the emission wavelength to 1.3 mum and the influence of strain on QDs is investigated. The SRL releases the strain between the wetting layer and QDs, and enlarges the size of QDs, as shown by atomic force microscopy measurements. As the thickness of InAs layer decreases to 1.7 ML, the QDs with the SRL are chained to strings and the density of QDs increases significantly, which leads to an abnormal redshift of 1.3 mum PL peak at room temperature. PL peaks of InAs QDs with the SRL show redshift compared with the QDs directly deposited on GaAs matrix. The dependences of PL lifetime on the QD size, density and temperature (T) are systematically studied. It is observed that the PL lifetime of QDs is insensitive to T below 50 K. Beyond 50 K, increases and then drops at higher temperature, with a peak at T{sub C}, which was determined by the SRL and the thickness of InAs. We have also observed an obvious PL spectral redshift of the QDs with 1.7 ML InAs coverage on SRL at low T as the measuring time delays. The PL lifetime of QDs with the SRL is smaller than that of QDs without the SRL. The QDs with different densities have different PL lifetime dependence on the QDs size. These observations can be explained by the competition between the carrier redistribution and thermal emission.

77 NANOSCIENCE AND NANOTECHNOLOGY↗