Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AROMATICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Syntheses of gold supported on metal oxides and their application in organic transformations

Herein, we report a general and straightforward synthesis method for gold supported on mesoporous and microporous metal oxides. Supported materials, in general, show higher crystallinity compare to unsupported systems as verified through powder X-ray diffraction (XRD). Also, through XRD, most of the metal is observed to be in its oxide form, whereas the gold support was found to be in its metallic state, which has been further confirmed from TEM. In terms of surface area, the catalyst was not found to follow any trend. Morphology wise, there are no changes observed after doping except in few cases. Combined results from XRD, X-ray fluorescence spectroscopy, Auger, and X-ray photoelectron spectroscopy suggest that gold is mainly in the bulk and very little (0.04% in case of gold doped calcium oxide) or non (in case of gold doped mixed manganese-cerium oxide) on the surface. The presence of Au (0) 4f peaks in XPS further confirms the metallic state of the gold. Oxides of indium, magnesium and calcium have been studied for the organic transformation reactions. An enhancement in activity and product selectivity was observed in the case of the gold supported catalysts. Indium serves as a great catalyst for C–C coupling and electrophilic aromatic substitution reactions and gives >99% conversion. Interestingly, 88% selectivity for C–C coupling and >99% selectivity for aromatic substitution have been achieved at 100 °C and room temperature respectively. Magnesium and calcium give Knoevenagel condensation products. At room temperature with very low catalyst loading, >99% conversion and selectivity were observed for the Knoevenagel reaction with as high as 35.30 TOF. Finally, a mechanism for the C–C coupling reaction has been proposed based on these results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Persistent activation of DNA damage signaling in response to complex mixtures of PAHs in air particulate matter

Complex mixtures of polycyclic aromatic hydrocarbons (PAHs) are present in air particulate matter (PM) and have been associated with many adverse human health effects including cancer and respiratory disease. However, due to their complexity, the risk of exposure to mixtures is difficult to estimate. In the present study the effects of binary mixtures of benzo[a]pyrene (BP) and dibenzo[a,l]pyrene (DBP) and complex mixtures of PAHs in urban air PM extracts on DNA damage signaling was investigated. Applying a statistical model to the data we observed a more than additive response for binary mixtures of BP and DBP on activation of DNA damage signaling. Persistent activation of checkpoint kinase 1 (Chk1) was observed at significantly lower BP equivalent concentrations in air PM extracts than BP alone. Activation of DNA damage signaling was also more persistent in air PM fractions containing PAHs with more than four aromatic rings suggesting larger PAHs contribute a greater risk to human health. Altogether our data suggests that human health risk assessment based on additivity such as toxicity equivalency factor scales may significantly underestimate the risk of exposure to complex mixtures of PAHs. The data confirms our previous findings with PAH-contaminated soil (Niziolek-Kierecka et al., 2012) and suggests a possible role for Chk1 Ser317 phosphorylation as a biological marker for future analyses of complex mixtures of PAHs. -- Highlights: ► Benzo[a]pyrene (BP), dibenzo[a,l]pyrene (DBP) and air PM PAH extracts were compared. ► Binary mixture of BP and DBP induced a more than additive DNA damage response. ► Air PM PAH extracts were more potent than toxicity equivalency factor estimates. ► Larger PAHs (> 4 rings) contribute more to the genotoxicity of PAHs in air PM. ► Chk1 is a sensitive marker for persistent activation of DNA damage signaling from PAH mixtures.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2013

Comparative developmental toxicity of environmentally relevant oxygenated PAHs

Oxygenated polycyclic aromatic hydrocarbons (OPAHs) are byproducts of combustion and photo-oxidation of parent PAHs. OPAHs are widely present in the environment and pose an unknown hazard to human health. The developing zebrafish was used to evaluate a structurally diverse set of 38 OPAHs for malformation induction, gene expression changes and mitochondrial function. Zebrafish embryos were exposed from 6 to 120 h post fertilization (hpf) to a dilution series of 38 different OPAHs and evaluated for 22 developmental endpoints. AHR activation was determined via CYP1A immunohistochemistry. Phenanthrenequinone (9,10-PHEQ), 1,9-benz-10-anthrone (BEZO), xanthone (XAN), benz(a)anthracene-7,12-dione (7,12-B[a]AQ), and 9,10-anthraquinone (9,10-ANTQ) were evaluated for transcriptional responses at 48 hpf, prior to the onset of malformations. qRT-PCR was conducted for a number of oxidative stress genes, including the glutathione transferase(gst), glutathione peroxidase(gpx), and superoxide dismutase(sod) families. Bioenergetics was assayed to measure in vivo oxidative stress and mitochondrial function in 26 hpf embryos exposed to OPAHs. Hierarchical clustering of the structure-activity outcomes indicated that the most toxic of the OPAHs contained adjacent diones on 6-carbon moieties or terminal, para-diones on multi-ring structures. 5-carbon moieties with adjacent diones were among the least toxic OPAHs while the toxicity of multi-ring structures with more centralized para-diones varied considerably. 9,10-PHEQ, BEZO, 7,12-B[a]AQ, and XAN exposures increased expression of several oxidative stress related genes and decreased oxygen consumption rate (OCR), a measurement of mitochondrial respiration. Comprehensive in vivo characterization of 38 structurally diverse OPAHs indicated differential AHR dependency and a prominent role for oxidative stress in the toxicity mechanisms. - Highlights: • OPAHs are byproducts of combustion present in the environment. • OPAHs pose a largely unknown hazard to human health. • We assayed the developmental toxicology of 39 different OPAHs in zebrafish. • The most toxic OPAHs contained adjacent diones or terminal, para-diones. • AHR dependency varied among OPAHs, and oxidative stress influenced their toxicology.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2017

In vitro metabolism of benzo[a]pyrene-7,8-dihydrodiol and dibenzo[def,p]chrysene-11,12 diol in rodent and human hepatic microsomes

Polycyclic aromatic hydrocarbons (PAHs) are contaminants that are ubiquitously found in the environment, produced through combustion of organic matter or petrochemicals, and many of which are procarcinogens. The prototypic PAH, benzo[a]pyrene (B[a]P) and the highly carcinogenic dibenzo[def,p]chrysene (DBC) are metabolically activated by isoforms of the P450 enzyme superfamily producing benzo[a]pyrene-7,8-dihydrodiol (B[a]P diol), dibenzo[def,p]chrysene-11,12 diol (DBC diol). Each of these diols can be further metabolized by cytochrome P450 enzymes to highly reactive diol-epoxide metabolites that readily react with DNA or by phase II conjugation facilitating excretion. To complement prior in vitro metabolism studies with parent B[a]P and DBC, both phase I metabolism and phase II glucuronidation of B[a]P diol and DBC diol were measured in hepatic microsomes from female B6129SF1/J mice, male Sprague-Dawley rats, and female humans. Metabolic parameters, including intrinsic clearance and Michaelis-Menten kinetics were calculated from substrate depletion data. Mice and rats demonstrated similar B[a]P diol phase I metabolic rates. Compared to rodents, human phase I metabolism of B[a]P diol demonstrated lower overall metabolic capacity, lower intrinsic clearance at higher substrate concentrations (>0.14 µM), and higher intrinsic clearance at lower substrate concentrations (<0.07 µM). Rates of DBC diol metabolism did not saturate in mice or humans and were highest overall in mice. Higher affinity constants and lower capacities were observed for DBC diol glucuronidation compared to B[a]P diol glucuronidation; however, intrinsic clearance values for these compounds were consistent within each species. Kinetic parameters reported here will be used to extend physiologically based pharmacokinetic (PBPK) models to include the disposition of B[a]P and DBC metabolites in animal models and humans to support future human health risk assessments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Biological upgrading of pyrolysis-derived wastewater: Engineering Pseudomonas putida for alkylphenol, furfural, and acetone catabolism and (methyl)muconic acid production

While biomass-derived carbohydrates have been predominant substrates for biological production of renewable fuels, chemicals, and materials, organic waste streams are growing in prominence as potential alternative feedstocks to improve the sustainability of manufacturing processes. Catalytic fast pyrolysis (CFP) is a promising approach to generate biofuels from lignocellulosic biomass, but it generates a complex, carbon-rich, and toxic wastewater stream that is challenging to process catalytically but could be biologically upgraded to valuable co-products. Here, we implemented modular, heterologous catabolic pathways in the Pseudomonas putida KT2440-derived EM42 strain along with the overexpression of native toxicity tolerance machinery to enable utilization of 89% (w/w) of carbon in CFP wastewater. The dmp monooxygenase and meta-cleavage pathway from Pseudomonas putida CF600 were constitutively expressed to enable utilization of phenol, cresols, 2- and 3-ethyl phenol, and methyl catechols, and the native chaperones clpB, groES, and groEL were overexpressed to improve toxicity tolerance to diverse aromatic substrates. Next, heterologous furfural and acetone utilization pathways were incorporated, and a native alcohol dehydrogenase was overexpressed to improve methanol utilization, generating reducing equivalents. All pathways (encoded by genes totaling ~30 kilobases of DNA) were combined into a single strain that can catabolize a mock CFP wastewater stream as a sole carbon source. Further engineering enabled conversion of all aromatic compounds in the mock wastewater stream to (methyl)muconates with a ~90% (mol/mol) yield. Biological upgrading of CFP wastewater as outlined in this work provides a roadmap for future applications in valorizing other heterogeneous waste streams.

(methyl)muconates↗
DOE OSTI2019

Molecular Engineering of Hydroxide Conducting Polymers for Anion Exchange Membranes in Electrochemical Energy Conversion Technology

Anion exchange membranes (AEMs) based on hydroxide-conducting polymers (HCPs) are a key component for anion-based electrochemical energy technology such as fuel cells, electrolyzers, and advanced batteries. Although these alkaline electrochemical applications offer a promising alternative to acidic proton exchange membrane electrochemical devices, access to alkaline-stable and high-performing polymer electrolyte materials has remained elusive until now. Despite vigorous research of AEM polymer design, literature examples of high-performance polymers with good alkaline stability at an elevated temperature are uncommon. Traditional aromatic polymers used in AEM applications contain a heteroatomic backbone linkage, such as an aryl ether bond, which is prone to degradation via nucleophilic attack by hydroxide ion. In this Account, we highlight some of the progress our group has made in the development of advanced HCPs for applications in AEMs and electrode ionomers. Here, we propose that a synthetic polymer design with an all C−C bond backbone and a flexible chain-tethered quaternary ammonium group provides an effective solution to the problem of alkaline stability. Because of the critical demand for such a polymer system, we have established new synthetic strategies for polymer functionalization and polycondensation using an acid catalyst. The first approach is to graft a cationic tethered alkyl group to pre-existing, commercially available styrene-based block copolymers. The second approach is to synthesize high-molecular-weight aromatic backbone polymers using acid-catalyzed polycondensation of arene monomers and a functionalized trifluoromethyl ketone substrate. Both strategies involve a simple two-step reaction process and avoid the use of expensive metal-based catalysts and toxic chemicals, thereby making the synthetic processes easily scalable to large industrial quantities. Both polymer systems were found to have excellent alkaline stability, confirmed by the preservation of ion exchange capacity and ion conductivity of the membrane after an alkaline test under conditions of 1 M NaOH at 80−95 °C. In addition, the advantage of good solvent processability and convenient scalability of the reaction process generates considerable interest in these polymers as commercial standard AEM candidates. AEM fuel cell and electrolyzer tests of some of the developed polymer membranes showed excellent performance, suggesting that this new class of HCPs opens a new avenue to electrochemical devices with real-world applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Flow Reactor Study of the Soot Precursors of Novel Cycloalkanes as Synthetic Jet Fuel Compounds: Octahydroindene, p -Menthane, and 1,4-Dimethylcyclooctane

Sustainable aviation fuels (SAFs) or Synthetic aviation turbine fuels (SATFs) derived from nonpetroleum sources are essential for energy security and a strong rural and agricultural economy. Airplanes operating on SAF can have lower particle emissions compared to those of conventional jet fuel, reducing air quality impacts near airports. Processing biobased isoprene or wood and agricultural waste can produce cycloalkane-rich fuels with properties meeting ASTM International’s SATF requirements. The unique structures of these cycloalkanes yield lower soot emissions because of their lack of aromatic rings. We measured the soot formation tendency as yield sooting index (YSI) and used laminar flow reactor experiments to evaluate soot precursors formed for isoprene-derived compounds p-menthane and 1,4-dimethylcyclooctane (DMCO), and octahydroindene (OHI)─ produced from woody biomass via catalytic fast pyrolysis. The combustion chemistry of the OHI and DMCO has not been previously studied. Experiments were conducted at 10 bar from 800 to 1200 K, equivalence ratios of 1.0 and 3.0, and residence times of 1.0 and 0.6 s, respectively. Experimentally detected species were used to elucidate the mechanisms of soot precursor formation. OHI exhibited the highest YSI (94.5) and formed a high concentration of benzene primarily by direct dehydrogenation of the six-membered ring. p-Menthane (YSI 92.0) and DMCO (YSI 85.0) oxidation products included fewer aromatic components but higher benzene precursors, including 1,3-butadiene, propyne, and allene. This suggests that the ring-opening pathway is dominant over the dehydrogenation pathway in the benzene formation for these compounds. This experimental speciation provides insight into the influence of the cycloalkane structure on the sooting tendencies of potential SAF blend components, thereby aiding in fuel design processes.

09 BIOMASS FUELS↗
DOE OSTI2016

Biomass Catalytic Pyrolysis on Ni/ZSM-5: Effects of Nickel Pretreatment and Loading

Here in this work, Ni/ZSM-5 catalysts with varied nickel loadings were evaluated for their ability to produce aromatic hydrocarbons by upgrading of pine pyrolysis vapors. The effect of catalyst pretreatment by hydrogen reduction was also investigated. Results indicate that the addition of nickel increases the yield of aromatic hydrocarbons while simultaneously increasing the conversion of oxygenates, relative to ZSM-5, and these effects are more pronounced with increasing nickel loading. Additionally, while initial activity differences were observed between the oxidized and reduced forms of nickel on ZSM-5 (i.e., NiO/ZSM-5 versus Ni/ZSM-5), the activity of both catalysts converges with increasing time on stream. These reaction results coupled with characterization of pristine and spent catalysts suggest that the catalysts reach similar active states during catalytic pyrolysis, regardless of pretreatment, as NiO undergoes in situ reduction to Ni by biomass pyrolysis vapors. This reduction of NiO to Ni was confirmed by reaction results and characterization by NH 3 temperature-programmed desorption, temperature-programmed reduction, and X-ray diffraction. This finding is significant in that the ability to reduce or eliminate the need for a pre-reaction H 2 reduction of Ni-modified zeolite catalysts could reduce process complexity and operating costs in a biorefinery-based vapor-phase upgrading process to produce biomass-derived fuels and chemicals. The ability to monitor catalyst activity in real time with a molecular beam mass spectrometer used to measure uncondensed, hot pyrolysis vapors allows for an improved understanding of the mechanism for improved activity with Ni addition to ZSM-5, which is attributed to the ability to prevent deactivation by deposition of coke and capping of zeolite micropores.

09 BIOMASS FUELS↗
DOE OSTI2020

Hierarchical Galloaluminosilicate MFI Catalysts for Ethane Nonoxidative Dehydroaromatization

This study presented an approach to overcome diffusion limitation and imbalance between Brønsted and Lewis acidities that affect conversion and aromatic yield in alkane nonoxidative dehydroaromatization (DHA) conversion. Three different Ga-promoted ZSM-5 catalysts were synthesized for the ethane DHA reaction. The hierarchical galloaluminosilicate Meso-GaZSM-5 was prepared by the solid-state crystallization technique wherein Ga was introduced through the in situ synthesis process. The microporous galloaluminosilicate Micro-GaZSM-5 was synthesized by the hydrothermal technique wherein Ga was introduced in situ during zeolite formation. The hierarchically structured Ga-Meso-ZSM-5 was synthesized by the solid-state crystallization method, but the Ga was introduced by the incipient wetness method. Additional Pt was incorporated by the incipient wetness technique for all three catalysts to enhance the DHA activity. The solid-state crystallization technique created the hierarchical structure without using a template. With the in situ technique, Ga species replaced the Al framework, reducing the strong Brønsted acidity. Meanwhile, they created the extraframework GaO + , introducing the strong Lewis acid sites into catalysts. Due to better synergistic interaction between the oxidation state of metals, acidic properties, and catalyst porosity, Pt-Meso-GaZSM-5 showed higher C 2 H 6 conversion and aromatic selectivity. The improvement on diffusivity not only reduces the effect of channel blockage but also improves the utilization of active sites. As a result, this work sheds light on the direct, nonoxidative conversion of shale gas without going through the syngas route.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Interaction of Anisole on Alumina-Supported Ni and Mo Oxide Hydrodeoxygenation Catalysts

The conversion of biomass to transportation fuels and value-added chemicals is a promising method to reduce reliance on fossil fuels. Mo-based catalysts have been shown to be highly active in the hydrodeoxygenation of biomass-derived phenolic compounds. The catalyst active phase, surface species, and the effect of adding additional metals is not comprehensively understood. Here we compare the temperature-dependent adsorption behavior of the model compound anisole 2 on an alumina-supported mixed nickel molybdenum oxide catalyst with two reference catalysts of molybdenum oxide and nickel oxide. Raman spectroscopy showed that the catalysts contain significant amounts of molybdates and molybdoaluminates, in addition to NiMoO 4 in the nickel molybdenum catalyst and MoO 3 in the molybdenum-only catalyst. Using transmission infrared spectroscopy under a controlled environment, we find that anisole chemisorbed largely through the oxygen in the methoxy group to form surface-bound phenoxy and methoxy species on all the catalysts. Ambient pressure X-ray photoelectrons spectroscopy measurements of the catalysts in anisole vapor showed reduced Mo atoms are the binding sites. The surface interaction and removal temperature of these species varied with the metal composition. The MoO x component dominated the adsorption behavior in both MoO x and NiMoO x catalysts. The formation of new aromatics, including methylated rings, depended on Ni composition. Upon adding hydrogen to induce the hydrodeoxygenation of anisole, undesirable polynuclear aromatic species were quickly formed on the Mo-based catalysts. In conclusion, these results suggest that the molybdenum oxide controls the adsorption and reactivity of the surface species, with a cooperative effect by Ni.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Periodic Trends from Metal Substitution in Bimetallic Mo-Based Phosphides for Hydrodeoxygenation and Hydrogenation Reactions

Bimetallic phosphides are promising materials for biomass valorization, yet many metal combinations are understudied as catalysts and require further analysis to realize their superior properties. Herein, we provide the synthesis, characterization, and catalytic performance of a variety of period 4 and 5 solid solutions of molybdenum-based bimetallic phosphides (MMoP, M = Fe, Co, Ni, Ru). From the results, the charge sharing between the metals and phosphorus control the relative oxidation of Mo and reduction of P in the lattice, which were both indirectly observed in binding energy shifts in X-ray photoelectron spectroscopy (XPS) and absorption energy shifts in X-ray absorption near-edge spectroscopy (XANES). For MMoP (M = Fe, Co, Ni), the more oxidized the Mo in the bimetallic phosphide, the higher the selectivity to benzene from phenol via direct deoxygenation at 400 °C and 750 psig. This phenomenon was observed in the bimetallic materials synthesized across period 4, where aromatic selectivity and degree of Mo oxidation both decreased in the following order FeMoP >> CoMoP > NiMoP. Alternatively, in the case of MMoP (M = Fe, Ru), the P in RuMoP is more oxidized compared to that in FeMoP, and the selectivity toward the hydrogenation pathway increased due to the interaction between the aromatic rings and the P species on the surface. For RuMoP and NiMoP, cyclohexanol was selectively produced from phenol with >99% selectivity when the reaction temperature was lowered to 125 °C at 750 psig, whereas FeMoP and CoMoP were not active under these conditions. Last, complete deoxygenation of phenol to benzene, cyclohexane, and cyclohexene was accomplished using mixtures of RuMoP and FeMoP in flow and batch experiments. Furthermore, these results highlight the versatility and wide applicability of transition metal phosphides for biomass conversions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Coverage-Dependent Adsorption of Phenol on Pt(111) from First Principles

In this work, we quantify the coverage dependence of the adsorbate-adsorbate and metal-adsorbate interactions for phenol on Pt(111) using density functional theory. For the four most favorable adsorption sites, we find that the adsorption energy of phenol decreases linearly as a function of coverage. As such, the repulsive phenol-phenol lateral interactions are strongest near saturation when the inter-molecular distances are less than ~4.5 Å, manifesting in a decrease of the C-O dihedral bond angle of ~4°. The linear dependence of the adsorption energy on coverage allows for the construction of a mean-field model. We validate our mean-field model for phenol adsorption by comparing the theoretically predicted differential heat of adsorption to the experimental data, where a maximum deviation of 0.11 eV is found. This compares well to earlier reported results that used a similar mean-field approach for the adsorption of benzene on Pt(111), suggesting that lateral interactions between functionalized aromatics can be parameterized using a simpler approximation. Overall, this work demonstrates a simple method toward the improvement in current state-of-the-art hydrodeoxygenation modeling at surfaces by allowing for the incorporation of coverage effects in systems with large, aromatic compounds without resorting to overly complex models.

09 BIOMASS FUELS↗
DOE OSTI2020

Toward Ultracold Organic Chemistry: Prospects of Laser Cooling Large Organic Molecules

Ultracold organic chemistry enables studies of reaction dynamics and mechanisms in quantum regime. Access to ultracold molecules hinges on the ability to efficiently scatter multiple photons via quasi-closed cycling transitions. Optical cycling in polyatomic molecules is challenging due to their complex electronic structure. Using equation-of-motion coupled-cluster calculations, we demonstrate that an alkaline earth metal attached to various aromatic ligands (such as benzene, phenol, cyclopentadienyl, and pyrrolide) offer nearly closed cycling transitions with only a few additional repump lasers. Here, we also show that aromatic ligands such as benzene can accommodate multiple cycling centers in various geometrical arrangements, opening new avenues in quantum information science, precision measurements, and ultracold chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Formation of Benzene and Naphthalene through Cyclopentadienyl-Mediated Radical–Radical Reactions

Resonantly stabilized free radicals (RSFRs) have been contemplated as fundamental molecular building blocks and reactive intermediates in molecular mass growth processes leading to polycyclic aromatic hydrocarbons (PAHs) and carbonaceous nanoparticles on Earth and in deep space. Here, by combining molecular beams and computational fluid dynamics simulations, we provide compelling evidence on the formation of benzene via the cyclopentadienyl-methyl reaction and of naphthalene through the cyclopentadienyl self-reaction, respectively. These systems offer benchmarks for the conversion of a five-membered ring to the 6π-aromatic (benzene) and the generation of the simplest 10π-PAH (naphthalene) at elevated temperatures. These results uncover molecular mass growth processes from the “bottom up” via RSFRs in high temperature circumstellar environments and combustion systems expanding our fundamental knowledge of the organic, hydrocarbon chemistry in our universe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Polystyrene Hydrogenolysis to High-Quality Lubricants Using Ni/SiO 2

Pyrolytic and light-activated oxidation processes are leading technologies for utilizing polystyrene (PS) wastes. These approaches exhibit poor selectivities, use complex reactors, and require solvents. Hydrogenolysis is effective for deconstructing polyolefins, but its application to PS feedstocks has been limited. Herein, we demonstrate Ni/SiO 2 catalysts to facilitate PS (M w ≈ 97 kDa) hydrogenolysis to produce lubricant base oils possessing group IV properties, achieving maximum yields of 70% within 6 h at 300 °C and 70 bar of H 2 . Gas, liquid, and oil product yields are stable across reaction conditions, whereas hydrogenation of the PS aromaticity and reduction of the molecular weight benefit from higher temperatures and H 2 pressures. Time-dependent experiments underscore the importance of elevated H 2 pressure, revealing that PS hydrogenolysis occurs sequentially, with aromatic ring hydrogenation preceding degradation of the C–C backbone. Kinetic measurements with 1,2-diphenylethane as a probe molecule demonstrate that ring hydrogenation pis 3 orders of magnitude faster than internal C–C bond cleavage over Ni/SiO 2 . Ni/SiO 2 proves to be effective in the hydrogenolysis of heavier PS polymers and rigid commercial PS products. Conversely, flexibility and foam PS feeds result in Ni/SiO 2 deactivation, attributed to performance additives. Unlike polyolefins, the process produces very little methane and other light hydrocarbons. Furthermore, these findings expand the applicability of hydrogenolysis to PS feedstocks, offering a versatile solution and broadening the range of high-value products from PS to include lubricant base oils.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Discovery of Peptidomimetic Ligands of EED as Allosteric Inhibitors of PRC2

The function of EED within polycomb repressive complex 2 (PRC2) is mediated by a complex network of protein–protein interactions. Allosteric activation of PRC2 by binding of methylated proteins to the embryonic ectoderm development (EED) aromatic cage is essential for full catalytic activity, but details of this regulation are not fully understood. EED’s recognition of the product of PRC2 activity, histone H3 lysine 27 trimethylation (H3K27me3), stimulates PRC2 methyltransferase activity at adjacent nucleosomes leading to H3K27me3 propagation and, ultimately, gene repression. By coupling combinatorial chemistry and structure-based design, we optimized a low-affinity methylated jumonji, AT-rich interactive domain 2 (Jarid2) peptide to a smaller, more potent peptidomimetic ligand (K d = 1.14 ± 0.14 μM) of the aromatic cage of EED. Our strategy illustrates the effectiveness of applying combinatorial chemistry to achieve both ligand potency and property optimization. Furthermore, the resulting ligands, UNC5114 and UNC5115, demonstrate that targeted disruption of EED’s reader function can lead to allosteric inhibition of PRC2 catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Ultranano Titania: Selectively Ridding Water of Persistent Organic Pollutants

Persistent organic pollutants, including the EPA's “dirty dozen”, are difficult to remove from water supplies due to their chemical stability. Here, we report a stable oxide photocatalyst, ultranano titania (d < 2 nm) doped with iron, Fe•TiUNP, that efficiently mineralizes multiple persistent pollutants including aromatic compounds plus common troublesome, difficult-to-oxidize intermediates such as formaldehyde and acetone, netting mineralization of persistent pollutants. Efficiency stems from a direct charge-transfer pathway. The key role of iron doping is to lower the reduction potential of the photogenerated electron so that it is insufficient to reduce water, thus eliminating competition from the hydrogen evolution reaction. The reduction potential of the localized electron is similarly insufficient to reduce quinone, enabling breaking aromaticity. Specific results for degrading acetone, phenol, benzoic acid, and 1,4-benzoquinone are reported.

alcohols↗
DOE OSTI2023

A High-Quality Genome-Scale Model for Rhodococcus opacus Metabolism

Rhodococcus opacus is a bacterium that has a high tolerance to aromatic compounds and can produce significant amounts of triacylglycerol (TAG). Here, we present iGR1773, the first genome-scale model (GSM) of R. opacus PD630 metabolism based on its genomic sequence and associated data. The model includes 1773 genes, 3025 reactions, and 1956 metabolites, was developed in a reproducible manner using CarveMe, and was evaluated through Metabolic Model tests (MEMOTE). We combine the model with two Constraint-Based Reconstruction and Analysis (COBRA) methods that use transcriptomics data to predict growth rates and fluxes: E-Flux2 and SPOT (Simplified Pearson Correlation with Transcriptomic data). Growth rates are best predicted by E-Flux2. Flux profiles are more accurately predicted by E-Flux2 than flux balance analysis (FBA) and parsimonious FBA (pFBA), when compared to 44 central carbon fluxes measured by 13C-Metabolic Flux Analysis (13C-MFA). Under glucose-fed conditions, E-Flux2 presents an R2 value of 0.54, while predictions based on pFBA had an inferior R2 of 0.28. We attribute this improved performance to the extra activity information provided by the transcriptomics data. For phenol-fed metabolism, in which the substrate first enters the TCA cycle, E-Flux2’s flux predictions display a high R2 of 0.96 while pFBA showed an R2 of 0.93. We also show that glucose metabolism and phenol metabolism function with similar relative ATP maintenance costs. These findings demonstrate that iGR1773 can help the metabolic engineering community predict aromatic substrate utilization patterns and perform computational strain design.

Roell, Garrett W.↗