Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AIRFOILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Two-layer thermal barrier coating for turbine airfoils - furnace and burner rig test results

A simple, two-layer plasma-sprayed thermal barrier coating system was developed which has the potential for protecting high temperature air-cooled gas turbine components. Of those coatings initially examined, the most promising system consisted of a Ni-16Cr-6Al-0.6Y (in wt%) thermal barrier coating (about 0.005 to 0.010 cm thick) and a ZrO2-12Y2O3 (in wt%) thermal barrier coating (about 0.025 to 0.064 cm thick). This thermal barrier substantially lowered the metal temperature of an air-cooled airfoil. The coating withstood 3,200 cycles (80 sec at 1,280 C surface temperature) and 275 cycles (1 hr at 1,490 C surface temperature) without cracking or spalling. No separation of the thermal barrier from the bond coating or the bond coating from the substrate was observed.

Stecura, S.↗

Some examples of unsteady transonic flows over airfoils

A finite difference flutter analysis is presented for the NACA 64A-410 airfoil at M equals 0.72, where the incidence is abruptly changed from 2 to 4 degrees. The effect of gust loads is studied, and the unsteady flow adjusting process is displayed. The semi-implicit procedure of Ballhaus and Lomax (1974) is used to solve the small disturbance transonic potential equation. The physical aspects of the results, rather than the numerical details, are emphasized.

Ballhaus, W. F.↗

Measurement of post-separated flow fields on airfoils

Detailed experimental measurements have been made of separated flow fields on a two-dimensional airfoil at low speeds. A rather small pitch yaw pressure probe was chosen. This probe has the capability of remote traversing in the vertical axis and remote yawing of plus or minus 180 deg. The calibration of the probe indicates a useful pitch angle range of about plus or minus 45 deg. The probe and its calibrations provide static and total pressure information as well as three components of velocity. Description and calibration of the probe and typical velocity and pressure plots of the separated flow fields are included.

Seetharam, H. C.↗

A numerical study of viscous flow around an airfoil

An integrodifferential method, previously formulated in terms of velocity and vorticity vectors, is reformulated in terms of stream function and vorticity for two-dimensional incompressible viscous flows. The reformulated integrodifferential method is shown to retain the distinguishing feature of the previous formulation in permitting the confinement of the solution field to the viscous region of the flow and consequently offers great computational advantages. The application of this procedure in a study of an incompressible flow around an impulsively started 9% thick symmetric Joukowski airfoil at an angle of attack of 15 deg and a Reynolds number of 1000 is discussed. Numerical results are presented and compared with available finite-difference results.

Wu, J. C.↗

Two inviscid computational simulations of separated flow about airfoils

Two inviscid computational simulations of separated flow about airfoils are described. The basic computational method is the line relaxation finite-difference method. Viscous separation is approximated with inviscid free-streamline separation. The point of separation is specified, and the pressure in the separation region is calculated. In the first simulation, the empiricism of constant pressure in the separation region is employed. This empiricism is easier to implement with the present method than with singularity methods. In the second simulation, acoustic theory is used to determine the pressure in the separation region. The results of both simulations are compared with experiment.

Barnwell, R. W.↗

An experimental and computational investigation of the flow field about a transonic airfoil in supercritical flow with turbulent boundary-layer separation

A combined experimental and computational research program for testing and guiding turbulence modeling within regions of separation induced by shock waves incident on turbulent boundary layers is described. Specifically, studies are made of the separated flow over the rear portion of an 18%-thick circular-arc airfoil at zero angle of attack in high Reynolds number supercritical flow. The measurements include distributions of surface static pressure and local skin friction. The instruments employed include high-frequency response pressure cells and a large array of surface hot-wire skin-friction gages. Computations at the experimental flow conditions are made using time-dependent solutions of ensemble-averaged Navier-Stokes equations, plus additional equations for the turbulence modeling.

Rubesin, M. W.↗

Advanced airfoil design empirically based transonic aircraft drag buildup technique

To systematically investigate the potential of advanced airfoils in advance preliminary design studies, empirical relationships were derived, based on available wind tunnel test data, through which total drag is determined recognizing all major aircraft geometric variables. This technique recognizes a single design lift coefficient and Mach number for each aircraft. Using this technique drag polars are derived for all Mach numbers up to MDesign + 0.05 and lift coefficients -0.40 to +0.20 from CLDesign.

Morrison, W. D., Jr.↗

Aerodynamic characteristics of wing-body configuration with two advanced general aviation airfoil sections and simple flap systems

Aerodynamic characteristics of a general aviation wing equipped with NACA 65 sub 2-415, NASA GA(W)-1, and NASA GA(PC)-1 airfoil sections were examined. The NASA GA(W)-1 wing was equipped with plain, split, and slotted partial- and full-span flaps and ailerons. The NASA GA(PC)-1 wing was equipped with plain, partial- and full-span flaps. Experimental chordwise static-pressure distribution and wake drag measurements were obtained for the NASA GA(PC)-1 wing at the 22.5-percent spanwise station. Comparisons were made between the three wing configurations to evaluate the wing performance, stall, and maximum lift capabilities. The results of this investigation indicated that the NASA GA(W)-1 wing had a higher maximum lift capability and almost equivalent drag values compared with both the NACA 65 sub 2-415 and NASA GA(PC)-1 wings. The NASA GA(W)-1 had a maximum lift coefficient of 1.32 with 0 deg flap deflection, and 1.78 with 41.6 deg deflection of the partial-span slotted flap. The effectiveness of the NASA GA(W)-1 plain and slotted ailerons with differential deflections were equivalent. The NASA GA(PC)-1 wing with full-span flaps deflected 0 deg for the design climb configuration showed improved lift and drag performance over the cruise flap setting of -10 deg.

Morgan, H. L., Jr.↗

Efficient solution of unsteady transonic flows about airfoils

An implicit finite difference procedure was developed for the efficient solution of unsteady transonic flow fields. Sample computations illustrate applications of procedures to aerodynamic problems. Solutions are presented that illustrate three types of shock wave motion that can result from airfoil control surface oscillations. The significant effect of wind tunnel wall conditions on these shock wave motions is demonstrated. Solutions are also presented for a simple aeroelastic problem in which the flow field equations and the structural motion equations are integrated simultaneously in time. Both stable and unstable aeroelastic interactions are considered. The procedure is adapted to compute unsteady aerodynamic force coefficients by the indicial method.

Ballhaus, W. F.↗

Determining the Lift and Drag Distributions on a Three-Dimensional Airfoil from Flow-Field Velocity Surveys

The application of the incompressible momentum integral equation to a three-dimensional airfoil was reviewed to interpret the resulting equations in a way that suggests a reasonable experimental technique for determining the spanwise distributions of lift and drag. Consideration was given to constraints that must be placed on the character of the vortex wake structure shed by the wing, to provide the familiar relationship between lift and bound vorticity. It is shown that the induced drag distribution is not directly measurable, but can be obtained, via the lift distribution, approximately for a deflected wake and exactly for a planar wake. Moreover, it is shown that it is only necessary to survey a short distance above and below the wing trailing edge. Examples are presented for several typical loading distributions and the results of a numerical simulation of the suggested experiment are discussed.

Orloff, K. L.↗

Measurement of post-separated flowfields on airfoils

A small combination pitch-yaw probe designed to facilitate measurement of post-separated flow fields on airfoils is described, along with its calibration. A five-tube probe is found 'ideally suited' to separated-flow measurements because of the pitch and yaw angle information provided in addition to static and total pressures. Wall proximity effects (in a low-speed tunnel) are described. Procedures for measurements in flows with small inclinations in pitch and yaw, for large flow angles, and for scanning flows with large inclinations are indicated.

Seetharam, H. C.↗

An approximate calculation of the strong interaction on a transonic airfoil

This paper describes an interactive computational scheme that calculates the transonic flow field over an airfoil. The inviscid flow, the turbulent boundary layer in the weak interaction region, and the elliptic flow in the strong interaction region are computed separately, and the solutions are matched iteratively in a direct, second-order interaction scheme. The pressure distribution, obtained from a transonic, small-perturbation solution, is prescribed on the boundary layer and the Navier-Stokes equations and the ensuing displacement thicknesses are used to modify the inviscid flow. The best overall results are obtained by using a turbulence model that eliminates the eddy viscosity in the strong interaction region. Computed pressure distributions are compared with experimental data and with Navier-Stokes solutions. In weak interactions, the agreement with experimental data is very good, as it is also in strong interactions except for the pressures in the separated-flow region. There the agreement is qualitative only, and the pressure recovery is too high. The results in both cases are superior or equal to those of the Navier-Stokes solutions, and the present method is significantly faster.

Seginer, A.↗

Experimental studies of trailing-edge conditions on an oscillating airfoil at frequency parameters of up to one

This paper describes an investigation to find the range of reduced frequencies over which the classical Kutta-Joukowsky condition is valid and the nature of deviations beyond this range. An NACA 64A010 airfoil with a 15-cm chord is supported between the side walls of a 25-cm x 35-cm low-speed wind tunnel and oscillated over reduced frequencies ranging from 0.05 to 1.2. The experimentally determined loading near the trailing edge is measured and compared with unsteady incompressible small-disturbance theory. Experimental data are obtained both with and without a boundary-layer trip. It is observed that application of the Kutta-Joukowsky condition in the theoretical analysis is valid below a reduced frequency of about 0.6 in predicting the loading in the trailing-edge region. At reduced frequencies beyond 0.8, the predicted results underestimate the measured loading near the trailing edge, and the deviations increase further with reduced frequency. Similarly, the experimental phase angle of the loading in the trailing-edge region agrees reasonably with the linear theory up to k = 0.8 but lags the predicted value beyond k = 0.8.

Satyanarayana, B.↗

Exact solutions in oscillating airfoil theory

A result obtained by Williams (1977) for two-dimensional airfoils oscillating in an arbitrary subsonic parallel flowfield is reformulated to show that the pressure distribution induced by any deformation can be construed from the particular solutions for heaving and pitching motions. Specific formulas are presented for an oscillating control surface with a sealed gap.

Williams, M. H.↗

Implicit finite difference simulation of flow about arbitrary geometries with application to airfoils

Finite difference procedures are used to solve either the Euler equations or the 'thin layer' Navier-Stokes equations subject to arbitrary boundary conditions. An automatic grid generation program is employed, and because an implicit finite difference algorithm for the flow equations is used, time steps are not severely limited when grid points are finely distributed. Computational efficiency and compatibility to vectorized computer processors is maintained by use of approximate factorization techniques. Computed results for both inviscid and viscous flow about airfoils are described and compared to various known solutions.

Steger, J. L.↗

Generalized Theodorsen solution for singular integral equations of the airfoil class

A class of singular integral equations is considered which arise in various two-dimensional mixed boundary-value problems with simple harmonic time variation. A problem typical of this class is that of determining the lifting pressure distribution on an oscillating airfoil in an unbounded incompressible potential flow. It is shown that Theodorsen's (1935) solution to this problem, with some modification, is valid for a general class of unsteady kernel functions. The technique employed is to consider an equivalent steady problem and then show that the unsteady resolvent and unsteady homogeneous solution can be written directly in terms of the steady solutions and a single frequency-dependent function which reduces to the Theodorsen function for the steady kernel.

Williams, M. H.↗

Dynamic stall experiments on the NACA 0012 airfoil

The flow over a NACA 0012 airfoil undergoing large oscillations in pitch was experimentally studied at a Reynolds number of and over a range of frequencies and amplitudes. Hot-wire probes and surface-pressure transducers were used to clarify the role of the laminar separation bubble, to delineate the growth and shedding of the stall vortex, and to quantify the resultant aerodynamic loads. In addition to the pressure distributions and normal force and pitching moment data that have often been obtained in previous investigations, estimates of the unsteady drag force during dynamic stall have been derived from the surface pressure measurements. Special characteristics of the pressure response, which are symptomatic of the occurrence and relative severity of moment stall, have also been examined.

Mcalister, K. W.↗