Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADAPTIVE SYSTEMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83

Adaptive grids generated by elliptic systems

It is pointed out that a finite difference grid which moves with the solution of the partial differential equation being solved can improve the accuracy and efficiency of a numerical algorithm. This technique is particularly advantageous in the solution of problems involving boundary layers or shocks where a poorly chosen grid may give a numerical solution which is useless because of poor resolution or extreme oscillations. The present investigation is concerned with the development of a scheme which does not excessively distort the grid. The grid generation algorithm is based on the numerical solution of a system of elliptic differential equations. Holst and Brown (1981) have used a preliminary solution to move points on the boundary of the physical region and then resolved the problem on a new grid generated by an elliptic system. In the current investigation, the grid movement and the solution will develop simultaneously. The solution is used to modify the generating equations, thereby controlling the grid point distributions.

Mastin, C. W.↗

Monitoring Performance of Complex Systems

33-page report describes use of computers in automatic on-line monitoring of Centaur rocket prior to launch. Computers analyze measurements and verify events and commands. System uses adaptive software so only real problems are detected and brought to attention of engineers. Software techniques transferable to such industrial uses as batch process control and production line automation.

Thomas, W. F.↗

Manned spaceflight activity planning with knowledge-based systems

An on-board expert system, capable of assisting with crew-activity planning and platform-status monitoring, could provide unprecedented autonomy to the crew of a permanently manned space station. To demonstrate this concept's feasibility, an existing knowledge-based system is adapted to support Space Shuttle crew-activity timeline planning. Proposed timeline changes are to be checked for compliance with crew capabilities and mission operating guidelines, so that a nonexpert can be guided through a successful plan modification. Early lessons that have been learned about the scope of the adaptation needed to achieve this objective are presented.

Mogilensky, J.↗

Cardiovascular responses to spaceflight

The cardiovascular system's adaptive changes during and after spaceflight are discussed. Cephalic fluid shifts are demonstrated by photographs along with calf girth and leg volume changes. Inflight measurements show an increase in average resting heart rate and systolic blood pressure, and a sympathetic-parasympathetic neural imbalance. Postflight findings include a small but reversible decrease in the left ventricular muscle mass. Since 1980, NASA's research has emphasized cardiovascular deconditioning and countermeasures: hemodynamic changes, endocrine and neurohumoral aspects, etiologic factors, and lower body negative pressure devices. Though human beings acclimate to the space environment, questions concerning the immediate and long-term aspects of spaceflight need to be answered for adequate planning of extended space missions.

Nicogossian, A.↗

Electromechanical Turboprop-Pitch-Control Mechanism

Propeller-control system autonomous and tolerant of failure. Mounting electrical-power module and conditioning/control systems inboard rotating propeller hub eliminates failure-prone slipring devices and creates autonomous, failure-tolerant propeller-control system. Modular component design facilitates on-the-wing maintenance. System highly adaptive to various sizes and gearbox configurations. Features and capabilities described unmatched by any comparable PCM now in existence. These capabilities needed by large, fuel-efficient, commuter turboprop aircraft now being developed by aircraft industry.

Steinetz, B. M.↗

Training for long duration space missions

The successful completion of an extended duration manned mission to Mars will require renewed research effort in the areas of crew training and skill retention techniques. The current estimate of inflight transit time is about nine months each way, with a six month surface visit, an order of magnitude beyond previous U.S. space missions. Concerns arise when considering the level of skill retention required for highly critical, one time operations such as an emergency procedure or a Mars orbit injection. The factors responsible for the level of complex skill retention are reviewed, optimal ways of refreshing degraded skills are suggested, and a conceptual crew training design for a Mars mission is outlined. Currently proposed crew activities during a Mars mission were reviewed to identify the spectrum of skills which must be retained over a long time period. Skill retention literature was reviewed to identify those factors which must be considered in deciding when and which tasks need retraining. Task, training, and retention interval factors were identified. These factors were then interpreted in light of the current state of spaceflight and adaptive training systems.

Goldberg, Joseph H.↗

Adaptive Control For Flexible Structures

Paper discusses ways to cope with measurement noise in adaptive control system for large, flexible structure in outer space. System generates control signals for torque and thrust actuators to turn all or parts of structure to desired orientations while suppressing torsional and other vibrations. Main result of paper is general theory for introduction of filters to suppress measurement noise while preserving stability.

Bayard, David S.↗

Improved silicon carbide for advanced heat engines

Work performed to develop silicon carbide materials of high strength and to form components of complex shape and high reliability is described. A beta-SiC powder and binder system was adapted to the injection molding process and procedures and process parameters developed capable of providing a sintered silicon carbide material with improved properties. The initial effort has been to characterize the baseline precursor materials (beta silicon carbide powder and boron and carbon sintering aids), develop mixing and injection molding procedures for fabricating test bars, and characterize the properties of the sintered materials. Parallel studies of various mixing, dewaxing, and sintering procedures have been carried out in order to distinguish process routes for improving material properties. A total of 276 MOR bars of the baseline material have been molded, and 122 bars have been fully processed to a sinter density of approximately 95 percent. The material has a mean MOR room temperature strength of 43.31 ksi (299 MPa), a Weibull characteristic strength of 45.8 ksi (315 MPa), and a Weibull modulus of 8.0. Mean values of the MOR strengths at 1000, 1200, and 14000 C are 41.4, 43.2, and 47.2 ksi, respectively. Strength controlling flaws in this material were found to consist of regions of high porosity and were attributed to agglomerates originating in the initial mixing procedures. The mean stress rupture lift at 1400 C of five samples tested at 172 MPa (25 ksi) stress was 62 hours and at 207 MPa (30 ksi) stress was 14 hours. New fluid mixing techniques have been developed which significantly reduce flaw size and improve the strength of the material. Initial MOR tests indicate the strength of the fluid-mixed material exceeds the baseline property by more than 33 percent.

Whalen, T. J.↗

An experimental adaptive array to suppress weak interfering signals

An experimental adaptive antenna system to suppress weak interfering signals is described. It is a sidelobe canceller with two auxiliary elements. Modified feedback loops are used to control the array weights. The received signals are simulated in hardware for parameter control. Digital processing is used for algorithm implementation and performance evaluation. The experimental results are presented. They show that interfering signals as much as 10 dB below the thermal noise level in the main channel are suppressed by 20-30 dB. Such a system has potential application in suppressing the interference encountered in direct broadcast satellite communication systems.

Walton, Eric K.↗

Automatic Calibration Of Manual Machine Tools

Modified scheme uses data from multiple positions and eliminates tedious positioning. Modification of computer program adapts calibration system for convenient use with manually-controlled machine tools. Developed for use on computer-controlled tools. Option added to calibration program allows data on random tool-axis positions to be entered manually into computer for reduction. Instead of setting axis to predetermined positions, operator merely sets it at variety of arbitrary positions.

Gurney, Rex D.↗

Zoom Vision System For Robotic Welding

Rugged zoom lens subsystem proposed for use in along-the-torch vision system of robotic welder. Enables system to adapt, via simple mechanical adjustments, to gas cups of different lengths, electrodes of different protrusions, and/or different distances between end of electrode and workpiece. Unnecessary to change optical components to accommodate changes in geometry. Easy to calibrate with respect to object in view. Provides variable focus and variable magnification.

Gilbert, Jeffrey L.↗

Artificial intelligence techniques for modeling database user behavior

The design and development of the adaptive modeling system is described. This system models how a user accesses a relational database management system in order to improve its performance by discovering use access patterns. In the current system, these patterns are used to improve the user interface and may be used to speed data retrieval, support query optimization and support a more flexible data representation. The system models both syntactic and semantic information about the user's access and employs both procedural and rule-based logic to manipulate the model.

Tanner, Steve↗

Experiments In Multivariable Adaptive Control Of A Flexible Structure

Report describes experiments in use of six-input/six-output multivariable adaptive control system to suppress vibrations in complicated flexible structure. Represents significant upgrade relative to two-input/two-output system, yielding significant improvement in spatial controllability and effective damping of largest set of modes. Structure exhibits low modal frequencies and complicated dynamics like those of large structures in outer space. Conclusions drawn from research relevant to such applications as active suppression of wind and earthquake vibrations in tall buildings and other large terrestrial structures.

Ih, Che-Hang C.↗

Task directed sensing

High-level robot control research must confront the limitations imposed by real sensors if robots are to be controlled effectively in the real world. In particular, sensor limitations make it impossible to maintain a complete, detailed world model of the situation surrounding the robot. To address the problems involved in planning with the resulting incomplete and uncertain world models, traditional robot control architectures must be altered significantly. Task-directed sensing and control is suggested as a way of coping with world model limitations by focusing sensing and analysis resources on only those parts of the world relevant to the robot's active goals. The RAP adaptive execution system is used as an example of a control architecture designed to deploy sensing resources in this way to accomplish both action and knowledge goals.

Firby, R. James↗

Parameter learning for performance adaptation

A parameter learning method is introduced and used to broaden the region of operability of the adaptive control system of a flexible space antenna. The learning system guides the selection of control parameters in a process leading to optimal system performance. A grid search procedure is used to estimate an initial set of parameter values. The optimization search procedure uses a variation of the Hooke and Jeeves multidimensional search algorithm. The method is applicable to any system where performance depends on a number of adjustable parameters. A mathematical model is not necessary, as the learning system can be used whenever the performance can be measured via simulation or experiment. The results of two experiments, the transient regulation and the command following experiment, are presented.

Peek, Mark D.↗