Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thin oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

On the detachment of thin ITO films from silicon substrate by microsecond laser irradiation

A method for the separation of thin ITO (indium-tin-oxide) films from a silicon substrate by pulsed laser irradiation is studied. The method enables the detachment of films with thicknesses of 360 nm and more without their destruction. The separation process consists in successive irradiation of the surface with single microsecond laser pulses at a wavelength of 650 nm. Upon being detached from silicon substrates, the films produced by high-frequency magnetron sputtering have a transmittance of 65% in the visible spectral range and a resistivity of ~1.2 kΩ/□. The thermal stresses appearing in thin ITO films and leading to their detachment are estimated.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Low-frequency dielectric properties of intrinsic and Al-doped rutile TiO{sub 2} thin films grown by the atomic layer deposition technique

Dielectric spectroscopy is carried out for intrinsic and aluminum-doped TiO{sub 2} rutile films which are deposited on RuO{sub 2} by the atomic layer deposition technique. Capacitance and conductance are measured in the 0.1 Hz–100 kHz range, for ac electric fields up to 1 MV{sub rms}/cm. Intrinsic films have a much lower dielectric constant than rutile crystals. This is ascribed to the presence of oxygen vacancies which depress polarizability. When Al is substituted for Ti, the dielectric constant further decreases. By considering Al-induced modification of polarizability, a theoretical relationship between the dielectric constant and the Al concentration is proposed. Al doping drastically decreases the loss in the very low frequency part of the spectrum. However, Al doping has almost no effect on the loss at high frequencies. The effect of Al doping on loss is discussed through models of hopping transport implying intrinsic oxygen vacancies and Al related centers. When increasing the ac electric field in the MV{sub rms}/cm range, strong voltage non-linearities are evidenced in undoped films. The conductance increases exponentially with the ac field and the capacitance displays negative values (inductive behavior). Hopping barrier lowering is proposed to explain high-field effects. Finally, it is shown that Al doping strongly improves the high-field dielectric behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Negative charge trapping effects in Al{sub 2}O{sub 3} films grown by atomic layer deposition onto thermally oxidized 4H-SiC

This letter reports on the negative charge trapping in Al{sub 2}O{sub 3} thin films grown by atomic layer deposition onto oxidized silicon carbide (4H-SiC). The films exhibited a permittivity of 8.4, a breakdown field of 9.2 MV/cm and small hysteresis under moderate bias cycles. However, severe electron trapping inside the Al{sub 2}O{sub 3} film (1 × 10{sup 12} cm{sup −2}) occurs upon high positive bias stress (>10 V). Capacitance-voltage measurements at different temperatures and stress conditions have been used to determine an activation energy of 0.1 eV. The results provide indications on the possible nature of the trapping defects and, hence, on the strategies to improve this technology for 4H-SiC devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Effect of correlated oxide electrodes on disorder pinning and thermal roughening of ferroelectric domain walls in epitaxial PbZr 0.2 Ti 0.8 O 3 thin films

We report the competing effects of disorder pinning and thermal roughening on ferroelectric domain walls as a function of temperature in epitaxial PbZr 0.2 Ti 0.8 O 3 thin films deposited on (001) SrTiO 3 substrates buffered by three types of correlated oxide electrodes, La 0.67 Sr 0.33 MnO 3 , LaNiO 3 , and SrIrO 3 . Piezo-response force microscopy studies show that the 50 nm PbZr 0.2 Ti 0.8 O 3 films are uniformly polarized in the as-grown states, with the patterned domain structures persisting above 700 °C. For all three types of films, the domain wall roughness is dominated by 2D random bond disorder at room temperature, and transitions to 1D thermal roughening upon heating. The roughness exponent ζ increases progressively from 0.3 to 0.5 within a temperature window that depends on the bottom conducting oxide type, from which we extracted the distribution of disorder pinning energy. Lastly, we discuss the possible origins of the disorder pinning and the effect of the correlated oxide electrodes on the energy landscape of DW motion.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Electrical and morphological characterization of transfer-printed Au/Ti/TiO{sub x}/p{sup +}-Si nano- and microstructures with plasma-grown titanium oxide layers

Highly-ordered, sub-70 nm-MOS-junctions of Au/Ti/TiO{sub x}/p{sup +}-Si were efficiently and reliably fabricated by nanotransfer-printing (nTP) over large areas and their functionality was investigated with respect to their application as MOS-devices. First, we used a temperature-enhanced nTP process and integrated the plasma-oxidation of a nm-thin titanium film being e-beam evaporated directly on the stamp before the printing step without affecting the p{sup +}-Si substrate. Second, morphological investigations (scanning electron microscopy) of the nanostructures confirm the reliable transfer of Au/Ti/TiO{sub x}-pillars of 50 nm, 75 nm, and 100 nm size of superior quality on p{sup +}-Si by our transfer protocol. Third, the fabricated nanodevices are also characterized electrically by conductive AFM. Fourth, the results are compared to probe station measurements on identically processed, i.e., transfer-printed μm-MOS-structures including a systematic investigation of the oxide formation. The jV-characteristics of these MOS-junctions demonstrate the electrical functionality as plasma-grown tunneling oxides and the effectivity of the transfer-printing process for their large-scale fabrication. Next, our findings are supported by fits to the jV-curves of the plasma-grown titanium oxide by kinetic-Monte-Carlo simulations. These fits allowed us to determine the dominant conduction mechanisms, the material parameters of the oxides and, in particular, a calibration of the thickness depending on applied plasma time and power. Finally, also a relative dielectric permittivity of 12 was found for such plasma-grown TiO{sub x}-layers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1994

The solid surface combustion experiment aboard the USML-1 mission

AA Experimental results from the five experiments indicate that flame spread rate increases with increasing ambient oxygen content and pressure. An experiment was conducted aboard STS-50/USML-1 in the solid Surface Combustion Experiment (SSCE) hardware for flame spread over a thin cellulosic fuel in a quiescent oxidizer of 35% oxygen/65% nitrogen at 1.0 atm. pressure in microgravity. The USML-1 test was the fourth of five planned experiments for thin fuels, one performed during each of five Space Shuttle Orbiter flights. Data that were gathered include gas- and solid-phase temperatures and motion picture flame images. Observations of the flame are described and compared to theoretical predictions from steady and unsteady models that include flame radiation from CO2 and H2O. Experimental results from the five esperiments indicate that flame spread rate increases with increasing ambient oxygen content and pressure. The brightness of the flame and the visible soot radiation also increase with increasing spread rate. Steady-state numerical predictions of temperature and spread rate and flame structure trends compare well with experimental results near the flame's leading edge while gradual flame evolution is captured through the unsteady model.

Altenkirch, Robert A.↗
DOE OSTI2025

Spatio-spectral optical fission in time-varying subwavelength layers

Transparent conducting oxides are highly doped semiconductors that exhibit favourable optical features compared with metals, including reduced material losses, tuneable electronic and optical properties, and enhanced damage thresholds. Recently, the photonic community has renewed its attention towards these materials, recognizing their remarkable nonlinear optical properties in the near-infrared spectrum. The exceptionally large and ultrafast change in the refractive index, which can be optically induced in these compounds, extends beyond the boundaries of conventional perturbative analysis and makes this class of materials the closest approximation to a time-varying system. Here we report the spatio-spectral fission of an ultrafast pulse trespassing a thin film of aluminium zinc oxide with a non-stationary refractive index. By applying phase conservation to this time-varying layer, our model can account for both space and time refraction and explain, in quantitative terms, the spatial separation of both spectrum and energy. Our findings represent an example of extreme nonlinear phenomena on subwavelength propagation distances, which provides new insights into transparent conducting oxides’ transient optical properties. This can be critical for the ongoing research on photonic time crystals, on-chip generation of non-classical states of light, integrated optical neural networks, ultrafast beam steering and frequency-division multiplexing.

integrated optics↗
DOE OSTI2022

Investigation of Molecular Diffusion at Block Copolymer Thin Films Using Maximum Entropy Method-Based Fluorescence Correlation Spectroscopy and Single Molecule Tracking

Fluorescence correlation spectroscopy (FCS) has been widely used to investigate molecular diffusion behavior in various samples. The use of the maximum entropy method (MEM) for FCS data analysis provides a unique means to determine multiple distinct diffusion coefficients without a priori assumption of their number. Comparison of the MEM-based FCS method (MEM-FCS) with another method will reveal its utility and advantage as an analytical tool to investigate diffusion dynamics. Herein, we measured diffusion of fluorescent probes doped into nanostructured thin films using MEM-FCS, and validated the results with single molecule tracking (SMT) data. The efficacy of the MEM code employed was first demonstrated by analyzing simulated FCS data for systems incorporating one and two diffusion modes with broadly distributed diffusion coefficients. The MEM analysis accurately afforded the number of distinct diffusion modes and their mean diffusion coefficients. These results contrasted with those obtained by fitting the simulated data to conventional two-component and anomalous diffusion models, which yielded inaccurate estimates of the diffusion coefficients. Subsequently, the MEM analysis was applied to FCS data acquired from hydrophilic dye molecules incorporated into microphase-separated polystyrene-block-poly(ethylene oxide) (PS-b-PEO) thin films characterized under a water-saturated nitrogen atmosphere. The MEM analysis revealed distinct fast and slow diffusion components attributable to molecules diffusing on the film surface and inside the film, respectively. SMT studies of the same materials yielded trajectories for mobile molecules that appear to follow the curved PEO microdomains. Diffusion coefficients obtained from the SMT data were consistent with those obtained for the slow diffusion component detected by MEM-FCS. Furthermore, these results highlight the utility of MEM-FCS and SMT for gaining complementary information on molecular diffusion processes in heterogeneous material systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Superconductivity in Oxides Generated by Percolating Electron or Hole Bipolarons

It is remarkable that in over three decades since the discovery of high-temperature superconductivity (HTS) in cuprates, no other class of materials has been found to exhibit this property above the liquid nitrogen boiling point at ambient pressure. Here, we describe the conformation of hole and electron bipolarons in doped cuprates and tungstates. Important similarities and differences between them are discussed. Both hole and electron bipolarons can percolate forming filaments or clusters in the bulk or on the surfaces as well. Upon cooling, these electronic objects can show superconducting properties. It is proposed that oxygen-reduced tungsten oxide WO{sub 3−x} in bulk or thin film form is a promising material to explore the HTS. Such material would be another example of bipolaronic superconductivity similar to cuprates. However, there is also an important difference: in the cuprates, holes predominantly enter the oxygen orbitals and hole bipolarons are composed of three-spin polarons, whereas in the tungstates, doped electrons are located on tungsten ions and W{sup 5+}–O{sup 2−}–W{sup 5+}electron bipolarons form from 5d{sup 1} W{sup 5+} polarons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Energy dissipation channels affecting photoluminescence from resonantly excited Er{sup 3+} ions doped in epitaxial ZnO host films

We identified prerequisite conditions to obtain intense photoluminescence at 1.54 μm from Er{sup 3+} ions doped in ZnO host crystals. The epitaxial ZnO:Er films were grown on sapphire C-plane substrates by sputtering, and Er{sup 3+} ions were resonantly excited at a wavelength of 532 nm between energy levels of {sup 4}I{sub 15/2} and {sup 2}H{sub 11/2}. There is a threshold deposition temperature between 500 and 550 °C, above which epitaxial ZnO films become free of miss-oriented domains. In this case, Er{sup 3+} ions are outside ZnO crystallites, having the same c-axis lattice parameters as those of undoped ZnO crystals. The improved crystallinity was correlated with enhanced emissions peaking at 1538 nm. Further elevating the deposition temperature up to 650 °C generated cracks in ZnO crystals to relax the lattice mismatch strains, and the emission intensities from cracked regions were three times as large as those from smooth regions. These results can be consistently explained if we assume that emission-active Er{sup 3+} ions are those existing at grain boundaries and bonded to single-crystalline ZnO crystallites. In contrast, ZnO:Er films deposited on a ZnO buffer layer exhibited very weak emissions because of their degraded crystallinity when most Er{sup 3+} ions were accommodated into ZnO crystals. Optimizing the degree of oxidization of ZnO crystals is another important factor because reduced films suffer from non-radiative decay of excited states. The optimum Er content to obtain intense emissions was between 2 and 4 at. %. When 4 at. % was exceeded, the emission intensity was severely attenuated because of concentration quenching as well as the degradation in crystallinity. Precipitation of Er{sub 2}O{sub 3} crystals was clearly observed at 22 at. % for films deposited above 650 °C. Minimizing the number of defects and impurities in ZnO crystals prevents energy dissipation, thus exclusively utilizing the excitation energy to emissions from Er{sup 3+} ions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Epitaxial stabilization of ultra thin films of high entropy perovskite

High entropy oxides (HEOs) are a class of materials, containing equimolar portions of five or more transition metal and/or rare-earth elements. We report here about the layer-by-layer growth of HEO [(La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 )NiO 3 ] thin films on NdGaO 3 substrates by pulsed laser deposition. The combined characterizations with in situ reflection high energy electron diffraction, atomic force microscopy, and x-ray diffraction affirm the single crystalline nature of the film with smooth surface morphology. The desired +3 oxidation of Ni has been confirmed by an element sensitive x-ray absorption spectroscopy measurement. Temperature dependent electrical transport measurements revealed a first order metal-insulator transition with the transition temperature very similar to the undoped NdNiO 3 . Furthermore, since both these systems have a comparable tolerance factor, this work demonstrates that the electronic behaviors of A-site disordered perovskite-HEOs are primarily controlled by the average tolerance factor.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Structural “ δ Doping” to Control Local Magnetization in Isovalent Oxide Heterostructures

Modulation and δ-doping strategies, in which atomically thin layers of charged dopants are precisely deposited within a heterostructure, have played enabling roles in the discovery of new physical behavior in electronic materials. Here in this paper, we demonstrate a purely structural “δ-doping” strategy in complex oxide heterostructures, in which atomically thin manganite layers are inserted into an isovalent manganite host, thereby modifying the local rotations of corner-connected MnO 6 octahedra. Combining scanning transmission electron microscopy, polarized neutron reflectometry, and density functional theory, we reveal how local magnetic exchange interactions are enhanced within the spatially confined regions of suppressed octahedral rotations. Finally, the combined experimental and theoretical results illustrate the potential to utilize noncharge-based approaches to “doping” in order to enhance or suppress functional properties within spatially confined regions of oxide heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

High-temperature chemical expansion of Pr0.1Ce0.9O2-δ thin films determined by Differential Laser Doppler Vibrometry

The chemical expansion of thin-film praseodymium-cerium oxide solid solutions (Pr 0.1 Ce 0.9 O 2-δ , PCO10) is investigated at temperatures ranging from 500 °C to 800 °C and oxygen activities down to about 10 -22 . Differential Laser Doppler Vibrometry (D-LDV) in combination with periodic electrochemical pumping of oxygen is used to detect very small displacements of the sample surface. With decreasing pumping frequency, the film approaches chemical equilibrium, which is nearly reached at 700 °C below 0.01 Hz. D-LDV enables direct measurement of film thickness changes as well as the bending of the underlying substrates due electrochemically induced lateral mechanical stress. The substrate bending is found to be more than an order of magnitude larger than the film thickness change, increasing the detection limit by the same factor. The thickness change of the thin film is calculated from the measured displacement of the sample surface and compared with directly measured values. Thin-film literature data available for low oxygen activities up to 650 °C agree with our measurements. In addition, the thickness change of the film is determined from the displacement at different sample positions, which validates previous measurements. Finally, thin film chemical expansion is found to be larger by a factor of about 2 than the corresponding bulk value in agreement with predictions from a mechanical model that the out-of-plane expansion of a constrained film is increased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Epitaxial growth of conducting perovskite SrTiO3 on (0001) c-axis sapphire using a γ-Al2O3 intermediate layer

Epitaxial growth of complex oxides on large-area wafers, such as sapphire and silicon, represents a key step toward scalable oxide device production. Solid phase epitaxy allows the synthesis of γ-Al 2 O 3 on α-Al 2 O 3 and provides a template with a matched lattice constant and appropriate cubic symmetry for subsequent heteroepitaxial growth of perovskite complex oxides. Nb-doped SrTiO 3 thin films were deposited epitaxially on (111)-oriented γ-Al 2 O 3 intermediate layers on (0001) c-axis-oriented sapphire α-Al 2 O 3 crystals using pulsed laser deposition. The Nb:SrTiO 3 thin films with a thickness of 53 nm, grown at 700 °C on γ-Al 2 O 3 , reached fully relaxed lattice parameters and were epitaxially oriented with respect to the substrate. Nb:SrTiO 3 layers deposited using identical deposition conditions directly on α-Al 2 O 3 , without the γ-Al 2 O 3 intermediate layer, were polycrystalline. The sheet conductivity of Nb:SrTiO 3 grown on γ-Al 2 O 3 /α-Al 2 O 3 is more than ten times higher than that of Nb:SrTiO 3 grown directly on α-Al 2 O 3 without the γ-Al 2 O 3 layer. The results point to new directions for the integration of (111)-oriented pseudocubic perovskite complex oxides and the integration of epitaxial complex oxides over larger areas using α-Al 2 O 3 single-crystal substrates.

Atomic force microscopy↗
NASA NTRS1992

Buffer layers for high-Tc thin films on sapphire

Buffer layers of various oxides including CeO2 and yttrium-stabilized zirconia (YSZ) have been deposited on R-plane sapphire. The orientation and crystallinity of the layers were optimized to promote epitaxial growth of YBa2Cu3O(7-delta) (YBCO) thin films. An ion beam channeling minimum yield of about 3 percent was obtained in the CeO2 layer on sapphire, indicating excellent crystallinity of the buffer layer. Among the buffer materials used, CeO2 was found to be the best one for YBCO thin films on R-plane sapphire. High Tc and Jc were obtained in YBCO thin films on sapphire with buffer layers. Surface resistances of the YBCO films were about 4 mOmega at 77 K and 25 GHz.

Wu, X. D.↗
DOE OSTI2025

Synthesis of multicomponent oxygen evolution reaction coatings via block copolymer templating with vapor- and solution-phase precursors

Porous mixed transition metal oxide heterostructures are promising electrocatalysts due to their high surface area. However, achieving conformal multicomponent oxide coatings with controlled nanoscale architectures remains challenging. Here, we report a synthesis strategy that integrates solution-based swelling infiltration (SBI) with gas-phase sequential infiltration synthesis (SIS) in a block copolymer template to fabricate porous, high-surface-area, conformal mixed-oxide electrocatalytic coatings. In this approach, a PS75-P4VP25 block copolymer (BCP) film is first infiltrated with transition metal acetylacetonate precursors via SBI, followed by exposure to gas phase precursors of ZnO via SIS process. Thermal annealing of the infiltrated BCP films converts them into all-inorganic Fe–ZnO, Fe–Co–ZnO, and Fe–Ni–ZnO coatings. Electrochemical testing on 70 nm thick conformal coatings demonstrates promising oxygen evolution reaction (OER) activity in alkaline media, with mass-specific current densities up to 1.0 × 10 5 mA/g at an overpotential of 330 mV (vs. RHE) at ultralow loading (~0.005 g/cm 2 ). Among the compositions, Fe–Co–ZnO and amorphous Fe–Ni–ZnO show the best OER performance, delivering current densities of 2.00 and 3.04 mA/cm 2 , respectively, compared to 1.52 mA/cm 2 for Fe–ZnO.. This work establishes SBI–SIS as a versatile route for fabricating nm-thin, high-performance multicomponent oxide heterostructures on cost-efficient supports, enabling efficient catalyst utilization in electrochemical energy conversion application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Epitaxial Ferroelectric Hf 0.5 Zr 0.5 O 2 with Metallic Pyrochlore Oxide Electrodes

The synthesis of fully epitaxial ferroelectric Hf 0.5 Zr 0.5 O 2 (HZO) thin films through the use of a conducting pyrochlore oxide electrode that acts as a structural and chemical template is reported. Such pyrochlores, exemplified by Pb 2 Ir 2 O 7 (PIO) and Bi 2 Ru 2 O 7 (BRO), exhibit metallic conductivity with room-temperature resistivity of <1 mΩ cm and are closely lattice matched to yttria-stabilized zirconia substrates as well as the HZO layers grown on top of them. Evidence for epitaxy and domain formation is established with X-ray diffraction and scanning transmission electron microscopy, which show that the c-axis of the HZO film is normal to the substrate surface. The emergence of the non-polar-monoclinic phase from the polar-orthorhombic phase is observed when the HZO film thickness is ≥≈30 nm. Furthermore, thermodynamic analyses reveal the role of epitaxial strain and surface energy in stabilizing the polar phase as well as its coexistence with the non-polar-monoclinic phase as a function of film thickness.

36 MATERIALS SCIENCE↗