Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

TH-EF-207A-04: A Dynamic Contrast Enhanced Cone Beam CT Technique for Evaluation of Renal Functions

Purpose: To develop a simple but robust method for the early detection and evaluation of renal functions using dynamic contrast enhanced cone beam CT technique. Methods: Experiments were performed on an integrated imaging and radiation research platform developed by our lab. Animals (n=3) were anesthetized with 20uL Ketamine/Xylazine cocktail, and then received 200uL injection of iodinated contrast agent Iopamidol via tail vein. Cone beam CT was acquired following contrast injection once per minute and up to 25 minutes. The cone beam CT was reconstructed with a dimension of 300×300×800 voxels of 130×130×130um voxel resolution. The middle kidney slices in the transvers and coronal planes were selected for image analysis. A double exponential function was used to fit the contrast enhanced signal intensity versus the time after contrast injection. Both pixel-based and region of interest (ROI)-based curve fitting were performed. Four parameters obtained from the curve fitting, namely the amplitude and flow constant for both contrast wash in and wash out phases, were investigated for further analysis. Results: Robust curve fitting was demonstrated for both pixel based (with R{sup 2}>0.8 for >85% pixels within the kidney contour) and ROI based (R{sup 2}>0.9 for all regions) analysis. Three different functional regions: renal pelvis, medulla and cortex, were clearly differentiated in the functional parameter map in the pixel based analysis. ROI based analysis showed the half-life T1/2 for contrast wash in and wash out phases were 0.98±0.15 and 17.04±7.16, 0.63±0.07 and 17.88±4.51, and 1.48±0.40 and 10.79±3.88 minutes for the renal pelvis, medulla and cortex, respectively. Conclusion: A robust method based on dynamic contrast enhanced cone beam CT and double exponential curve fitting has been developed to analyze the renal functions for different functional regions. Future study will be performed to investigate the sensitivity of this technique in the detection of radiation induced kidney dysfunction.

60 APPLIED LIFE SCIENCES↗

Sci-Fri PM: Radiation Therapy, Planning, Imaging, and Special Techniques - 03: The Potential Benefit Of Esophageal Sparing During Palliative Radiotherapy For Lung Cancer

Puropose: Palliative radiotherapy is an effective technique to alleviate systems of disease burden in late-stage lung cancer patients. Previous randomized controlled studies demonstrated a survival benefit in patients with good performance status at radiation doses of 35Gy10 or greater but with an increased incidence of esophagitis. The objective of this planning study was to assess the potential impact of esophageal-sparing IMRT (ES-IMRT) compared to the current standard of care using parallel-opposed pair beams (POP). Methods: In this study, 15 patients with lung cancer treated to a dose of 30Gy in 10 fractions between August 2015 and January 2016 were identified. Radiation treatment plans were optimized using ES-IMRT by limiting the max esophagus point dose to 24Gy. Using published Lyman-Kutcher-Burman normal tissue complication probabilities (LKB-NTCP) models, both plans were evaluated for the likelihood of esophagitis (≥ grade 2) and pneumonitis (≥ grade 2). Results: Using ES-IMRT, the median esophageal and lung mean doses reduced from 16 and 8Gy to 7 and 7Gy, respectively. Using the LKB models, the theoretical probability of symptomatic esophagitis and pneumonitis reduced from 13 to 1%, and from 5 to 3%, respectively. The median NTD mean for the GTV and PTV of the clinically approved POP plans compared to the ES-IMRT plans were similar. Conclusions: Advanced radiotherapy techniques such as ES-IMRT may have clinical utility in reducing treatment-related toxicity in advanced lung cancer patients. Our data suggests that the rate of esophagitis can be reduced without compromising tumour control.

60 APPLIED LIFE SCIENCES↗

Nonlinear ultrasonic technique for the characterization of microstructure in additive materials

This study employs nonlinear ultrasonic techniques to track microstructural changes in additively manufactured metals. The second harmonic generation technique based on the transmission of Rayleigh surface waves is used to measure the acoustic nonlinearity parameter, β. Stainless steel specimens are made through three procedures: traditional wrought manufacturing, laser-powder bed fusion, and laser engineered net shaping. The β parameter is measured through successive steps of an annealing heat treatment intended to decrease dislocation density. Dislocation density is known to be sensitive to manufacturing variables. In agreement with fundamental material models for the dislocation-acoustic nonlinearity relationship in the second harmonic generation, β drops in each specimen throughout the heat treatment before recrystallization. Geometrically necessary dislocations (GNDs) are measured from electron back-scatter diffraction as a quantitative indicator of dislocations; average GND density and β are found to have a statistical correlation coefficient of 0.852 showing the sensitivity of β to dislocations in additively manufactured metals. Moreover, β shows an excellent correlation with hardness, which is a measure of the macroscopic effect of dislocations.

42 ENGINEERING↗

Multi-technique characterization of iron reduction by an Antarctic Shewanella : an analog system for putative Martian biosignature identification

ABSTRACT Microbes from terrestrial extreme environments enable testing of biosignature production in conditions relevant to astrobiological targets. Mars, which was likely more conducive to life during early warmer and wetter epochs, has inspired missions that search for signs of early life in the surficial rock record, including mineral or organic biosignatures. Microbial iron reduction is a common and ancient metabolism that may have also operated on other rocky celestial bodies. To investigate biosignature production during iron reduction, aShewanellasp. (strain BF02_Schw) isolated from a subglacial discharge known as Blood Falls, Antarctica, was incubated with the electron acceptor ferrihydrite (Fh). Biosignatures associated with Fh reduction were identified using a suite of techniques currently utilized or proposed for Mars missions, including X-ray diffraction and infrared, Mössbauer, and Raman spectroscopy. The biotic origin of features was validated by transcriptional changes observed between treatments with and without Fh and comparison to killed controls. In live treatments, Fh was reduced to magnetite and goethite, both detected in Martian lacustrine basins. Several soluble and volatile metabolites were also detected, including riboflavin and dimethyl sulfide (DMS), which could be astrobiological indicators of active microbial processes. While none of the identified biosignatures individually would serve as definitive proof of life (past or present), detecting concomitant features associated with known terrestrial biotic processes would provide compelling rationale for more targeted life detection missions. Terrestrial extremophiles can support the exploration of astrobiologically relevant microbial processes, validation of life detection instrumentation, and potentially the discovery of new biomarkers. IMPORTANCE Culture-based experiments with terrestrial extremophiles can elucidate biosignatures that may be analogous to those produced under extraterrestrial conditions, and thus inform sampling and technology strategies for future missions. Here, we demonstrate the production of several biosignatures under iron-reducing conditions byShewanellasp. BF02_Schw, originally isolated from an Antarctic analog feature. These biosignatures could be detectable using flight-ready instrumentation. Growth experiments with terrestrial extremophiles can identify biosignatures measurable by current methodologies and inform the development and optimization of techniques for detecting extant or extinct life on other worlds.

Biotechnology & Applied Microbiology↗

X-ray divergent-beam (Kossel) technique: A review

The development of the X-ray divergent-beam (Kossel) technique over the last 50 years is traced. The fundamentals of this technique and ways to implement it experimentally are considered, and its potential for studying the real structure of crystals is analyzed in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effective regularized algebraic reconstruction technique for computed tomography

A new fast version of the reconstruction algorithm for computed tomography based on the simultaneous algebraic reconstruction technique (SART) is proposed. The algorithm iteration is asymptotically accelerated using the fast Hough transform from O(n{sup 3}) to O(n{sup 2}logn). Similarly to the algebraic reconstruction technique (RegART), which was proposed by us previously, the regularization operator is applied after each iteration. A bilateral filter plays the role of this operator. The algorithm behavior is investigated using the model experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-Loop Techniques for Massless Feynman Diagram Calculations

We review several multi-loop techniques for analytical massless Feynman diagram calculations in relativistic quantum field theories: integration by parts, the method of uniqueness, functional equations and the Gegenbauer polynomial technique. A brief, historically oriented, overview of some of the results obtained over the decades for the massless 2-loop propagator-type diagram is given. Concrete examples of up to 5-loop diagram calculations are also provided.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Depth profiling of semiconductor structures by X-ray microanalysis using the electron probe energy variation technique

Depth profiling of semiconductor structures by X-ray microanalysis using the electron probe variation technique followed by mathematical processing of the measurement results is described. Experimental dependences of the relative X-ray intensity on the energy of the electron probe were compared to the Monte Carlo simulation results. Concentration depth profiles were estimated using a priori assumptions, and numerical parameters of the depth distributions were determined from the best fit of calculated curves to the experimental data. The technique was applied to determine Al depth profiles in SiC and GaN samples.

36 MATERIALS SCIENCE↗

Characterization of defects in colloidal CdSe nanocrystals by the modified thermostimulated luminescence technique

The temperature dependencies of the luminescence spectra of 5-nm-diameter CdSe semiconductor nanocrystals synthesized by colloidal-chemistry methods are investigated. The two bands observed in these spectra around 2.01 and 1.37 eV correspond to band-to-band transitions and luminescence of defect states, respectively. A model explaining the temperature behavior of the luminescence band intensities both upon cooling and heating is put forward. A new modification of spectrally resolved thermostimulated luminescence technique making it possible to determine the activation energies and the character of traps responsible for the temperature dependence of the luminescence intensities is suggested. This technique is used to obtain the activation energies of the emission and capture of electrons at traps (190 and 205 meV, respectively) and to determine the depth of the electron level (57 meV) responsible for luminescence in the 1.37-eV region.

36 MATERIALS SCIENCE↗

Photodetectors on the basis of Ge/Si(001) heterostructures grown by the hot-wire CVD technique

The fabrication of photodetectors for the wavelength range of communications λ = 1.3–1.55 µm on the basis of Ge/Si(001) heterostructures with thick (∼0.5 µm) Ge layers grown by the hot-wire technique at reduced growth temperatures (350°C) is reported. The single-crystal Ga layers are distinguished by a low density of threading dislocations (∼10{sup 5} cm{sup –2}). The photodetectors exhibit a rather high quantum efficiency (∼0.05 at λ = 1.5 µm and 300 K) at moderate reverse saturation current densities (∼10{sup –2} A cm{sup –2}). Thus, it is shown that the hot-wire technique offers promise for the formation of integrated photodetectors for the wavelength range of communications, especially in the case of limitations on the conditions of heat treatments.

36 MATERIALS SCIENCE↗

Prompt quality monitoring of InSe and GaSe semiconductor crystals by the nuclear quadrupole resonance technique

To determine the quality of layer-structured semiconductor single crystals, the nuclear quadrupole resonance technique with successive scanning of the entire sample volume and assessment of the structural quality on the basis of the observed spectra is used. The proposed method is appropriate in the case of InSe, GaSe and GaAs ingots grown in evacuated cells by the Bridgman technique and can be used repeatedly in subsequent technological procedures with no operator access to the material. To provide scanning within a limited region of the sample and to ensure efficient interaction of the high-frequency field with the crystal, excitation and detection of the nuclear-spin-induction signal is implemented by the saddle-shaped transceiver coil of the nuclear quadrupole resonance spectrometer.

36 MATERIALS SCIENCE↗

One- and Two-Qubit Gates: Rabi Technique and Single Unipolar Pulses

Methods for controlling states of interacting superconducting flux qubits using power-efficient devices of fast single-quantum logic (Josephson nonlinearity cavities) are studied. One- and two-qubit quantum logical operations performed within the conventional control technique using Rabi pulses and using picosecond single unipolar magnetic field pulses are comparatively analyzed. It is shown that all main operations can be implemented with an accuracy of better than 97% due to optimization of the shape and parameters of unipolar control pulses (associated with, e.g., propagation of fluxons in transmission lines). The efficiency of the developed technique for programming a two-qubit quantum processor implementing the simplest Deutsch–Jozsa algorithm is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hyperspherical Sparse Approximation Techniques for High-Dimensional Discontinuity Detection

This work proposes a hyperspherical sparse approximation framework for detecting jump discontinuities in functions in high-dimensional spaces. The need for a novel approach results from the theoretical and computational inefficiencies of well-known approaches, such as adaptive sparse grids, for discontinuity detection. Our approach constructs the hyperspherical coordinate representation of the discontinuity surface of a function. Then sparse approximations of the transformed function are built in the hyperspherical coordinate system, with values at each point estimated by solving a one-dimensional discontinuity detection problem. Due to the smoothness of the hypersurface, the new technique can identify jump discontinuities with significantly reduced computational cost, compared to existing methods. Several approaches are used to approximate the transformed discontinuity surface in the hyperspherical system, including adaptive sparse grid and radial basis function interpolation, discrete least squares projection, and compressed sensing approximation. Moreover, hierarchical acceleration techniques are also incorporated to further reduce the overall complexity. In conclusion, rigorous complexity analyses of the new methods are provided, as are several numerical examples that illustrate the effectiveness of our approach.

97 MATHEMATICS AND COMPUTING↗

Multilevel Techniques for Compression and Reduction of Scientific Data---The Multivariate Case

We develop a technique for multigrid adaptive reduction of data (MGARD). Special attention is given to the case of tensor product grids, where our approach permits the use of nonuniformly spaced grids in each direction, which can prove problematic for many types of data reduction methods. An important feature of our approach is the provision of guaranteed, computable bounds on the loss incurred by the reduction of the data. Many users are leery of lossy algorithms and will only consider using them provided that numerical bounds on the pointwise difference between the original and the reduced datasets are given. Accordingly, we develop techniques for bounding the loss measured in the $L^{\infty}(\Omega)$ norm, and we show that these bounds are realistic in the sense that they do not significantly overestimate the actual loss. Here, the resulting loss indicators are used to guide the adaptive reduction of the data so that the reduced dataset meets a user-prescribed tolerance or memory constraint. Illustrative numerical examples, including the reduction of data arising from the simulation of a nonlinear reaction-diffusion problem, a turbulent channel flow, and a climate simulation, are provided.

97 MATHEMATICS AND COMPUTING↗

Spin response function technique in spin-transparent synchrotrons

Small perturbative fields in a synchrotron influence both the spin and orbital motion of a stored beam. Their effect on the beam polarization consists of two contributions, a direct kick and an effect of the ring lattice due to orbit perturbation. Spin response function is an analytic technique to account for both contributions. We develop such a technique for the spin-transparent synchrotrons where the design spin motion is degenerate. Several perspective applications are illustrated or discussed. In particular, we consider the questions of the influence of lattice imperfections on the spin dynamics and spin manipulation during an experiment. The presented results are of a direct relevance to NICA (JINR), RHIC (BNL), EIC (BNL) and other existing and future colliders when they arranged with polarization control in the spin-transparent mode.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

New techniques for jet calibration with the ATLAS detector

A determination of the jet energy scale is presented using proton–proton collision data with a centre-of-mass energy of $\sqrt{s}$ = 13 TeV, corresponding to an integrated luminosity of 140 fb -1 collected using the ATLAS detector at the LHC. Jets are reconstructed using the ATLAS particle-flow method that combines charged-particle tracks and topo-clusters formed from energy deposits in the calorimeter cells. The anti-k t jet algorithm with radius parameter R = 0.4 is used to define the jet. Novel jet energy scale calibration strategies developed for the LHC Run 2 are reported that lay the foundation for the jet calibration in Run 3. Jets are calibrated with a series of simulation-based corrections, including state-of-the-art techniques in jet calibration such as machine learning methods and novel in situ calibrations to achieve better performance than the baseline calibration derived using up to 81 fb -1 of Run 2 data. The performance of these new techniques is then examined in the in situ measurements by exploiting the transverse momentum balance between a jet and a reference object. The b -quark jet energy scale using particle flow jets is measured for the first time with around 1% precision using $\gamma$+jet events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pulse shape discrimination technique for diffuse supernova neutrino background search with JUNO

Pulse shape discrimination (PSD) is widely used in particle and nuclear physics. Specifically in liquid scintillator detectors, PSD facilitates the classification of different particle types based on their energy deposition patterns. This technique is particularly valuable for studies of the diffuse supernova neutrino background (DSNB), nucleon decay, and dark matter searches. This paper presents a detailed investigation of the PSD technique, applied in the DSNB search performed with the Jiangmen Underground Neutrino Observatory (JUNO). Instead of using conventional cut-and-count methods, we employ methods based on boosted decision trees and neural networks and compare their capability to distinguish the DSNB signals from the atmospheric neutrino neutral-current background events. The two methods demonstrate comparable performance, resulting in a 50–80% improvement in signal efficiency compared to a previous study performed for JUNO (An et al. [JUNO] in J Phys G 43(3):030401, 2016). Moreover, we study the dependence of the PSD performance on the visible energy and final state composition of the events and find a significant dependence on the presence/absence of 11 C. Finally, we evaluate the impact of the detector effects (photon propagation, PMT dark noise, and waveform reconstruction) on the PSD performance.

FOS: Physical sciences↗

A survey of CPU-GPU heterogeneous computing techniques

As both CPU and GPU become employed in a wide range of applications, it has been acknowledged that both of these processing units (PUs) have their unique features and strengths and hence, CPU-GPU collaboration is inevitable to achieve high-performance computing. This has motivated significant amount of research on heterogeneous computing techniques, along with the design of CPU-GPU fused chips and petascale heterogeneous supercomputers. In this paper, we survey heterogeneous computing techniques (HCTs) such as workload-partitioning which enable utilizing both CPU and GPU to improve performance and/or energy efficiency. We review heterogeneous computing approaches at runtime, algorithm, programming, compiler and application level. Further, we review both discrete and fused CPU-GPU systems; and discuss benchmark suites designed for evaluating heterogeneous computing systems (HCSs). Furthermore, we believe that this paper will provide insights into working and scope of applications of HCTs to researchers and motivate them to further harness the computational powers of CPUs and GPUs to achieve the goal of exascale performance.

97 MATHEMATICS AND COMPUTING↗