Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

In situ ambient pressure XPS study of Pt/Cu(111) single-atom alloy in catalytically relevant reaction conditions

The presence of multiple reactant gases as well as reaction intermediates in a heterogeneous catalytic reaction results in a complex interaction between different components of the catalyst with each gas, which can alter the surface and chemical state of the catalyst differently than in the presence of an individual gas alone. In this study, we used in situ ambient pressure x-ray photoelectron spectroscopy to study the surface state of Pt/Cu(111) single-atom alloy model system in two catalytically relevant reaction conditions: CO 2 hydrogenation and CO oxidation. We found that the activation of CO 2 results in the formation of CO, which adsorbs on Pt sites at up to 400 K. In the presence of CO 2 and H 2 , Pt catalyzes the reverse water–gas shift reaction, which produces more CO and further stabilizes surface Pt atoms at 450 K. On the other hand, in CO oxidation condition, the presence of O 2 results in the formation of a thick Cu 2 O layer at higher temperatures, and Pt atoms are no longer detected in the surface and subsurface layers. When O 2 is introduced to the sample before CO, the formation of a complete Cu 2 O layer that covers all Pt atoms occurs immediately at room temperature. Finally, however, when CO is introduced at room temperature before O 2 , the presence of adsorbed CO on Pt sites stabilizes the surface Pt atoms and prevents the formation of a complete Cu 2 O layer, thus exposing the Pt atoms in 'holes' in the Cu 2 O layer.

36 MATERIALS SCIENCE↗

Change in the electronic properties of an InAs (111)A surface at oxygen and fluorine adsorption

Based on ab initio calculations, the adsorption of oxygen and fluorine on reconstructed (2 Multiplication-Sign 2) and unreconstructed (1 Multiplication-Sign 1) InAs (111)A surfaces is studied. The most stable adsorption positions are determined. It is shown that adsorption of oxygen on both surfaces gives rise to electronic states in the band gap. The preferential positions for oxygen adsorption on an InAs (111)A (2 Multiplication-Sign 2) surface are those where oxygen is bonded both to indium atoms and to arsenic atoms in the surface layer and also the vacant site between three indium atoms (the 'In-hollow position). Adsorption of fluorine brings about a pushing of the surface states out of the band gap; the position above indium atoms (the 'In-top position) is preferential for adsorbed fluorine. Adsorption of fluorine on an InAs (111)A (1 Multiplication-Sign 1) surface leads to the elimination of the surface state formed by indium p orbitals and to an unpinning of the Fermi level.

36 MATERIALS SCIENCE↗

AuPd Nanoicosahedra: Atomic-Level Surface Modulation for Optimization of Electrocatalytic and Photocatalytic Energy Conversion

Modulation of bimetallic nanocatalysts with atomic precision would allow for significant increases in catalyst activity through the optimization of heteroatomic interplay. In practice, this level of control over homogeneously turning the heteroatomic states in the surface regions of catalysts remains a great challenge for practical applications requiring mass production. In this work, a one-step aqueous strategy for preparation of AuPd nanoicosahedra core–shell structures has been developed. By turning the molar ratio of Au and Pd precursors, the nanoicosahedra could be made with uniform core composition (Pd ~20%) and largely flexible surface compositions (Pd: 20–70%). Under model reactions of electrochemical ethanol oxidation (EOR) and 4-nitrophenol (4-NP) reduction, the Au 55 Pd 45 surface displayed superior activities. Here, x-ray absorption spectroscopy revealed that AuPd nanoicosahedra with Pd-poor surfaces (Au 79 Pd 21 and Au 60 Pd 40 ) maintain Au-like electronic structures while those with Pd-rich surfaces are more Pd-like. The Au 55 Pd 45 surface struck a delicate balance between the two extremes, leading to the optimal Au–Pd interplay for catalytic performance. Overall, the development of a one-step aqueous strategy for atomic-level control over bimetallic nanoparticle surface states is an important milestone for future advances in catalysis. Our findings in atomic-scale catalyst design will bring deep insights into the fields of nanosynthesis and heterogeneous catalysis, which will be beneficial for further scientific breakthroughs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theory of the reaction dynamics of small molecules on metal surfaces

The objective of this project has been to develop realistic theoretical models for gas-surface interactions, with a focus on processes important in heterogeneous catalysis. The dissociative chemisorption of a molecule on a metal is a key step in many catalyzed reactions, and is often the rate-limiting step. We have explored the dissociative chemisorption of H 2 , H 2 O and CH 4 on a variety of metal surfaces. Most recently, our extensive studies of methane dissociation on Ni and Pt surfaces have fully elucidated its dependence on translational energy, vibrational state and surface temperature, providing the first accurate comparisons with experimental data. We have explored Eley-Rideal and hot atom reactions of H atoms with H- and C-covered metal surfaces. H atom interactions with graphite have also been explored, including both sticking and Eley-Rideal recombination processes. Again, our methods made it possible to explain several experiments studying these reactions. The sticking of atoms on metal surfaces has also been studied. To help elucidate the experiments that study these processes, we examine how the reaction dynamics depend upon the nature of the molecule-metal interaction, as well as experimental variables such as substrate temperature, beam energy, angle of impact, and the internal states of the molecules. Electronic structure methods based on Density Functional Theory are used to compute each molecule-metal potential energy surface. Both time-dependent quantum scattering techniques and quasi-classical methods are used to examine the reaction or scattering dynamics. Much of our effort has been directed towards developing improved quantum methods that can accurately describe reactions, as well as include the effects of substrate temperature (lattice vibration).

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Comparison and Assessment of Three Advanced Land Surface Models in Simulating Terrestrial Water Storage Components over the United States

In preparation for next generation North American Land Data Assimilation System (NLDAS), 3 three advanced land surface models (CLM4.0, Noah-MP, and CLSM-F2.5) were run from 1979 4 to 2014 within the NLDAS-based framework. Monthly total water storage anomaly (TWSA) and 5 its individual water storage components were evaluated against satellite-based and in situ 6 observations, and reference reanalysis products at basin-wide and statewide scales. In general, all 7 three models are able to reasonably capture the monthly and interannual variability and 8 magnitudes for TWSA. However, contributions of the anomalies of individual water 9 components to TWSA are very dependent on the model and basin. A major contributor to the 10 TWSA is the anomaly of total column soil moisture content (SMCA) for CLM4.0 and Noah-MP 11 or groundwater storage anomaly (GWSA) for CLSM-F2.5 although other components such as 12 the anomaly of snow water equivalent (SWEA) also play some role. For each individual water 13 storage component, the models are able to capture broad features such as monthly and 14 interannual variability. However, there are large inter-model differences and quantitative 15 uncertainties in this study. Therefore, it should be thought of as a preliminary synthesis and 16 analysis.

58 GEOSCIENCES↗

Unveiling the High-valence Oxygen Degradation Across the Delithiated Cathode Surface

Charge compensation on anionic redox reaction (ARR) has been promising to realize extra capacity beyond transition metal redox in battery cathodes. The practical development of ARR capacity has been hindered by high-valence oxygen instability, particularly at cathode surfaces. However, the direct probe of surface oxygen behavior has been challenging. Here, the electronic states of surface oxygen are investigated by combining mapping of resonant Auger electronic spectroscopy (mRAS) and ambient pressure X-ray photoelectron spectroscopy (APXPS) on a model LiCoO 2 cathode. The mRAS verified that no high-valence oxygen can sustain at cathode surfaces, while APXPS proves that cathode electrolyte interphase (CEI) layer evolves and oxidizes upon oxygen gas contact. In conclusion, this work provides valuable insights into the high-valence oxygen degradation mode across the interface. Oxygen stabilization from surface architecture is proven a prerequisite to the practical development of ARR active cathodes.

25 ENERGY STORAGE↗

The Salience of Nonlinearities in the Boreal Winter Response to ENSO: North Pacific and North America

The prominence of nonlinearities in the response to El Niño as compared to La Niña, to moderate El Niño events as compared to extreme El Ninño events, and to different flavors of El Niño events, are analyzed using the NASA Goddard Earth Observing System Chemistry-Climate Model. In the Central North Pacific region where the sea level pressure response to El Niño-Southern Oscillation (ENSO) peaks, nonlinearities are relatively muted. In contrast, changes to the east of this region (i.e. the far-Northeastern Pacific) and to the north of this region (over Alaska) in response to different ENSO phases are more clearly nonlinear, and become statistically robust after more than 15 events are considered. The relative prominence of these nonlinearities is related to the zonal wavenumber of the tropical precipitation response. Associated with these nonlinearities over the far-Northeastern Pacific are nonlinearities in precipitation over Western United States and surface temperature over Northwest North America and Midwestern United States. In all regions at least 15 events of each type are necessary before nonlinearities can be identified as statistically significant at the 95% confidence level due to the presence of internal atmospheric variability. As there have only been a similar number of ENSO events to the total needed for significance since 1920, it is not surprising that it has been difficult to establish statistically significant nonlinearities using observational data.

Nonlinearities↗

Dynamic tunneling force microscopy for characterizing electronic trap states in non-conductive surfaces

Dynamic tunneling force microscopy (DTFM) is a scanning probe technique for real space mapping and characterization of individual electronic trap states in non-conductive films with atomic scale spatial resolution. The method is based upon the quantum mechanical tunneling of a single electron back and forth between a metallic atomic force microscopy tip and individual trap states in completely non-conducting surface. This single electron shuttling is measured by detecting the electrostatic force induced on the probe tip at the shuttling frequency. In this paper, the physical basis for the DTFM method is unfolded through a physical model and a derivation of the dynamic tunneling signal as a function of several experimental parameters is shown. Experimental data are compared with the theoretical simulations, showing quantitative consistency and verifying the physical model used. The experimental system is described and representative imaging results are shown.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electronic states and photoluminescence of TiO{sub 2} nanotubes with adsorbed surface oxygen

The electronic states associated with enhanced photocatalytic activity of anodic anatase TiO{sub 2} nanotubes (NTs) annealed in N{sub 2} and O{sub 2} are investigated by photoluminescence (PL). The NTs annealed in N{sub 2} show a green peak related to oxygen vacancies and its position blueshifts with deceasing temperature, whereas those annealed in O{sub 2} show a double peak at 475-600 nm and the energy separation increases with decreasing temperature. Spectral analysis and density function theory calculation disclose that the double peak results from residual oxygen vacancies and oxygen atoms on the NT wall and the increased energy separation arises from the larger difference between the inner and outer NT stress at low temperature.

36 MATERIALS SCIENCE↗

Structural phase states in NiTi near-surface layers modified by electron and ion beams

The paper considers the effects arising on X-ray diffraction patterns taken in different diffraction geometries and how these effects can be interpreted to judge structural states in NiTi near-surface regions after electron and ion beam treatment. It is shown that qualitative and quantitative analysis of phase composition, lattice parameters of main phases, elastic stress states, and their in-depth variation requires X-ray diffraction patterns in both symmetric Bragg–Brentano and asymmetric Lambot–Vassamilleta geometries with variation in X-ray wavelengths and imaging conditions (with and with no β-filter). These techniques of structural phase analysis are more efficient when the thickness of modified NiTi surface layers is 1–10 μm (after electron beam treatment) and requires special imaging conditions when the thickness of modified NiTi surface layers is no greater than 1 μm (after ion beam treatment)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanisms for the adhesion of silver to glow discharge sensitized perfluorinated ethylene propylene (PEP)

Details are given for the deposition of silver onto FEP for a batch coater capable of handling 864 square inches at a time. The effectiveness of the glow discharge is shown to be optimum when the FEP faces the anode. Using solid state theory based upon the work function difference, and the heuristic assumption that the surface of FEP is populated with fluoride ions, it is argued that an anode sensitized surface develops states receptive to electron transfer from silver, whereas a cathode sensitized surface is polarized only, and as a result cannot permanently trap charge. Thermodynamic arguments given show that an order of magnitude of 10 to the 9th power electrons are transferred into states to a depth of 10 nm.

Schutt, J. B.↗

Atomic states in optical traps near a planar surface

In this paper, we discuss the atomic states in a vertical optical lattice in proximity of a surface. We study the modifications to the ordinary Wannier-Stark states in the presence of a surface, and we characterize the energy shifts produced by the Casimir-Polder interaction between atom and mirror. In this context, we introduce an effective model describing the finite size of the atom in order to regularize the energy corrections. In addition, the modifications to the energy levels due to a hypothetical non-Newtonian gravitational potential as well as their experimental observability are investigated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Attribution of Trends and Variability in Surface Ozone over the United States

Concentrations of tropospheric ozone, a greenhouse gas and air pollutant, are impacted by changes in precursor emissions as well meteorology and influx from the stratosphere. Observations show a decreasing trend in summertime surface ozone at rural stations in the eastern United States, while some western stations show increasing trends, particularly in springtime. We use the Global Modeling Initiative (GMI) global chemical transport model to investigate the roles of precursor emission changes, meteorological variability, and stratosphere-troposphere exchange (STE) in explaining observed trends in surface ozone from rural sites in the United States from 1991-2010. The model's interannual variability shows significant correlations with observations from many of the surface sites. We also compare the simulated ozone to ozonesonde data for several locations with sufficiently long records. We compare a simulation with time-dependent precursor emissions, including emission reductions over the United States and Europe and increases over Asia, to a simulation with fixed emissions to quantify the impact of changing emissions on the surface trends. The simulation with varying emissions reproduces much of the east-west difference in summertime ozone over the U.S., although it generally underestimates the negative trend in the East. In contrast, the fixed-emission simulation shows increasing ozone at both eastern and western sites. We will discuss possible causes of this behavior, including long-range transport and STE.

ozone↗

Understanding of catalysis on early transition metal oxide-based catalysts through exploration of surface structure and chemistry during catalysis using in-situ approaches

Two main categories of heterogeneous catalysts are metal and metal oxide which catalyze 80% chemical reactions at solid-gas and solid-liquid interfaces. Metal oxide catalysts are much more complicated than metal catalysts. The reason is that the cations of the metal atoms could exhibit a few different oxidation states on surface of the same catalyst particle such as Co 3 O 4 or change of their oxidation states under different reactive environments. For a metal catalyst, there is only one oxidation state typically. In addition, surface of a metal oxide can be terminated with multiple surface functionalities including O atoms with different binding configurations and OH group. For metal, only metal atoms are exposed typically. Obviously, the complication of surface chemistry and structure of a metal oxide makes studies of surface of an oxide catalyst very challenging. Due to the complication of surface of a meal oxide, the electronic and geometric structures of surface of a metal oxide and the exposed species have received enormous attention since oxide catalysts catalyze at least 1/3 chemical reactions in chemical and energy industries. Understanding of catalytic reactions on early transition metal oxide-based catalysts is fundamentally intriguing and of great practical interest in energy- and environment-related catalysis. Exploration of surface chemistry of oxide-based catalysts at molecular level during catalysis has remained challenging though it is critical in deeply understanding catalysis on oxide-based catalysts and developing oxide-based catalysts with high activity and selectivity. Thus, the overall objective of this project is to explore surface chemistry and structure of early transition metal oxide-based catalysts through in-situ characterization of surface of catalysts, measurements of catalytic performances, and then build an intrinsic correlation of surface chemistry and structure with their catalytic performances in a few important catalytic reactions, and essentially fundamentally understand catalytic mechanism. Furthermore, this correlation will guide the design of catalysts with high activity and selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A quantum processor based on coherent transport of entangled atom arrays

The ability to engineer parallel, programmable operations between desired qubits within a quantum processor is key for building scalable quantum information systems. In most state-of-the-art approaches, qubits interact locally, constrained by the connectivity associated with their fixed spatial layout. Here we demonstrate a quantum processor with dynamic, non-local connectivity, in which entangled qubits are coherently transported in a highly parallel manner across two spatial dimensions, between layers of single- and two-qubit operations. Our approach makes use of neutral atom arrays trapped and transported by optical tweezers; hyperfine states are used for robust quantum information storage, and excitation into Rydberg states is used for entanglement generation. We use this architecture to realize programmable generation of entangled graph states, such as cluster states and a seven-qubit Steane code state. Furthermore, we shuttle entangled ancilla arrays to realize a surface code state with thirteen data and six ancillary qubits and a toric code state on a torus with sixteen data and eight ancillary qubits. Finally, we use this architecture to realize a hybrid analogue–digital evolution and use it for measuring entanglement entropy in quantum simulations, experimentally observing non-monotonic entanglement dynamics associated with quantum many-body scars. Realizing a long-standing goal, these results provide a route towards scalable quantum processing and enable applications ranging from simulation to metrology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the location and stability of charge in SiO{sub 2}/SiN{sub x} dielectric double layers used for silicon surface passivation

Dielectric double layers of thermal silicon dioxide–chemical vapour deposition (CVD) silicon nitride are found to produce excellent passivation of silicon surfaces by combining a chemical reduction of surface defect states, with a field effect reduction of carriers at the surface due to charge in the dielectrics. The charge present in such double-layers has previously been attributed to be characteristic of the interface between the two. However, experimental evidence shows this is indirect and inconclusive. This manuscript reports direct measurements that show the charge lies within 10 nm of the interface between passivating double layers of thermal silicon dioxide–plasma CVD silicon nitride. In addition, the passivation efficiency of oxide-nitride layers, deposited using optimised conditions, was found to be largely unaffected by extra charge subsequently added to the film. The passivation efficiency of textured surfaces or those produced using non-optimised deposition conditions is found to be highly dependent on the field effect component provided by extra deposited charge. Using such extra field effect component, surface recombination velocities <2 cm/s have been obtained on single oxide and oxide/nitride double layers. The extra deposited charge was found to have good long term stability when the dielectric films are submitted to a chemical treatment. By contrast, poor stability of the deposited charge was observed when subjected to ultraviolet radiation. These results point to the importance of the interface between dielectrics when considering how to optimise the charge present in passivating dielectric films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Zeeman-induced gapless superconductivity with a partial Fermi surface

We show that an in-plane magnetic field can drive two-dimensional spin-orbit-coupled systems under the superconducting proximity effect into a gapless phase where parts of the normal state Fermi surface are gapped, and the ungapped parts are reconstructed into a small Fermi surface of Bogoliubov quasiparticles at zero energy. As a result, the charge distribution, spin texture, and density of states of such a “partial Fermi surface” are discussed. Material platforms for its physical realization are proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗