Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

High-Pressure Studies on Synthetic Orthorhombic Cubanite (CuFe{sub 2}S{sub 3})

We report here the successful synthesis of orthorhombic cubanite using microwave heating and characterization for its orthorhombic phase by powder X-ray diffraction, Micro-Raman, Thermal and high pressure electrical resistivity measurements. The unique physico-chemical conditions prevent successful synthesis under laboratory conditions, however the mineral occurs in nature in its orthorhombic form. A distinct endothermic dip in Differential Thermal Analysis (DTA) at 280 deg. C is in agreement with the DTA data reported for natural cubanite. An irreversible first order phase transformation from orthorhombic to NiAs structure is seen at 4 GPa/200 deg. C. High pressure electrical resistivity and micro-Raman spectroscopic measurements on the synthetic sample exhibit transformation to isocubanite.

36 MATERIALS SCIENCE↗

Influence of process parameters on properties of reactively sputtered tungsten nitride thin films

Tungsten nitride (WN{sub x}) thin films were produced by reactive dc magnetron sputtering of tungsten in an Ar-N{sub 2} gas mixture. The influence of the deposition power on the properties of tungsten nitride has been analyzed and compared with that induced by nitrogen content variation in the sputtering gas. A combined analysis of structural, electrical and optical properties on thin WN{sub x} films obtained at different deposition conditions has been performed. It was found that at an N{sub 2} content of 14% a single phase structure of W{sub 2}N films was formed with the highest crystalline content. This sputtering gas composition was subsequently used for fabricating films at different deposition powers. Optical analysis showed that increasing the deposition power created tungsten nitride films with a more metallic character, which is confirmed with resistivity measurements. At low sputtering powers the resulting films were crystalline whereas, with an increase of power, an amorphous phase was also present. The incorporation of an excess of nitrogen atoms resulted in an expansion of the W{sub 2}N lattice and this effect was more pronounced at low deposition powers. Infrared analysis revealed that in WN{sub x} films deposited at low power, chemisorbed N{sub 2} molecules did not behave as ligands whereas at high deposition power they clearly appeared as ligands around metallic tungsten. In this study, the influence of the most meaningful deposition parameters on the phase transformation reaction path was established and deposition conditions suitable for producing thermally stable and highly crystalline W{sub 2}N films were found.

36 MATERIALS SCIENCE↗

Spectroscopic investigations on structural incorporation pathways of FeIII into zeolite frameworks in cement-relevant environments

Fe{sup III}-containing aluminosilicate zeolites are present in cement-relevant and natural environments. Although Fe{sup III} is known to occur in framework tetrahedral sites where it substitutes isomorphically Al{sup III}O{sub 4} or in extra-framework octahedral sites as free Fe(H{sub 2}O){sub 6}{sup 3+}, the structural incorporation process of Fe{sup III} into different sites is little known. We aim to discern feasible pathways of Fe{sup III} incorporation using hydrothermal synthesis methods and synchrotron-based spectroscopic analyses. Results showed that introducing either Fe{sup 3+} or Fe{sub 2}O{sub 3}·xH{sub 2}O initially during zeolite nucleation did not lead to Fe{sup III} incorporation into the zeolites but only Fe{sub 2}O{sub 3}·xH{sub 2}O prevailed in both cases. However, Fe(NO{sub 3}){sub 3}, FeCl{sub 3}, and Fe{sub 2}O{sub 3}·xH{sub 2}O affected the kind of zeolite formed. A feasible pathway to incorporate tetrahedral Fe{sup III} in the zeolite framework was to introduce firstly Fe{sup III} in the cage of faujasite-Y followed by a phase transformation to chabazite. This study facilitates understanding of Fe{sup III} uptake in zeolites and of Fe{sup III} functional sites that can contribute to immobilization of contaminants.

36 MATERIALS SCIENCE↗

Effect of the out-of-plane stress on the properties of epitaxial SrTiO{sub 3} films with nano-pillar array on Si-substrate

A nonlinear thermodynamic formalism has been proposed to calculate the physical properties of the epitaxial SrTiO{sub 3} films containing vertical nano-pillar array on Si-substrate. The out-of-plane stress induced by the mismatch between film and nano-pillars provides an effective way to tune the physical properties of ferroelectric SrTiO{sub 3} films. Tensile out-of-plane stress raises the phase transition temperature and increases the out-of-plane polarization, but decreases the out-of-plane dielectric constant below Curie temperature, pyroelectric coefficient, and piezoelectric coefficient. These results showed that by properly controlling the out-of-plane stress, the out-of-plane stress induced paraelectric-ferroelectric phase transformation will appear near room temperature. Excellent dielectric, pyroelectric, piezoelectric properties of these SrTiO{sub 3} films similar to PZT and other lead-based ferroelectrics can be expected.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

VO{sub 2} (A): Reinvestigation of crystal structure, phase transition and crystal growth mechanisms

Well crystallized VO{sub 2} (A) microrods were grown via a single step hydrothermal reaction in the presence of V{sub 2}O{sub 5} and oxalic acid. With the advantage of high crystalline samples, we propose P4/ncc as an appropriate space group at room temperature. From morphological studies, we found that the oriented attachment and layer by layer growth mechanisms are responsible for the formation of VO{sub 2} (A) micro rods. The structural and electronic transitions in VO{sub 2} (A) are strongly first order in nature, and a marked difference between the structural transition temperatures and electronic transitions temperature was evidenced. The reversible intra- (LTP-A to HTP-A) and irreversible inter- (HTP-A to VO{sub 2} (M1)) structural phase transformations were studied by in-situ powder X-ray diffraction. Attempts to increase the size of the VO{sub 2} (A) microrods are presented and the possible formation steps for the flower-like morphologies of VO{sub 2} (M1) are described. - Graphical abstract: Using a single step and template free hydrothermal synthesis, well crystallized VO{sub 2} (A) microrods were prepared and the P4/ncc space group was assigned to the room temperature crystal structure. Reversible and irreversible phase transitions among different VO{sub 2} polymorphs were identified and their progressive nature was highlighted. Attempts to increase the microrods size, involving layer by layer formation mechanisms, are presented. - Highlights: • Highly crystallized VO{sub 2} (A) microrods were grown via a single step hydrothermal process. • The P4/ncc space group was determined for VO{sub 2} (A) at room temperature. • The electronic structure and progressive nature of the structural phase transition were investigated. • A weak coupling between structural and electronic phase transitions was identified. • Different crystallite morphologies were discussed in relation with growth mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct imaging of crystal structure and defects in metastable Ge{sub 2}Sb{sub 2}Te{sub 5} by quantitative aberration-corrected scanning transmission electron microscopy

Knowledge about the atomic structure and vacancy distribution in phase change materials is of foremost importance in order to understand the underlying mechanism of fast reversible phase transformation. In this Letter, by combining state-of-the-art aberration-corrected scanning transmission electron microscopy with image simulations, we are able to map the local atomic structure and composition of a textured metastable Ge{sub 2}Sb{sub 2}Te{sub 5} thin film deposited by pulsed laser deposition with excellent spatial resolution. The atomic-resolution scanning transmission electron microscopy investigations display the heterogeneous defect structure of the Ge{sub 2}Sb{sub 2}Te{sub 5} phase. The obtained results are discussed. Highly oriented Ge{sub 2}Sb{sub 2}Te{sub 5} thin films appear to be a promising approach for further atomic-resolution investigations of the phase change behavior of this material class.

36 MATERIALS SCIENCE↗

Microstructural evolution and electrical resistivity of nanocrystalline W thin films grown by sputtering

Highlights: • W thin films with thicknesses of 5–40 nm were deposited by sputtering and annealed up to 400°C. • Grain size of the beta (β)-W was about 5 nm, whereas that of the alpha (α)-W was about 130 nm. • Thickness dependent electrical resistivity variations as a function of annealing temperature were presented. - Abstract: Tungsten (W) thin films and nanostructures, particularly those having a beta (β)-phase, have attracted a large amount of attention lately because an ultrathin β-phase W film attached to a ferromagnetic layer can reverse the direction of magnetization upon current injection. However, in-depth microstructural studies including the phase transformation in W films as a function of thickness and post-deposition heat treatment temperature are rare. Here, we report the microstructural evolution and the change in the electrical resistivity of W films with thicknesses of 5–40 nm. Microstructural analyses indicate that the β-W is nanocrystalline with a small grain size of about 5 nm, while the alpha (α)-W has a grain size larger than 130 nm with random crystal orientation. We present a state diagram showing the phase of the W film as functions of film thickness and annealing temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Kinetics of the eutectoid colony growth in a solid solution for simple alloy models

A simple model, which reflects the main features of the phase equilibria between austenite, ferrite, and cementite, is proposed to study the growth kinetics of pearlite-type eutectoid colonies. The previously developed microscopic theory of diffusional phase transformations in alloys developed earlier is used to simulate steady-state colony growth for several versions of this model. The existing phenomenological approaches are found to describe the main features of the colony growth kinetics qualitatively correctly; however, these approaches are insufficient to draw quantitative conclusions. The changes in the colony front shape as temperature T approaches eutectic point T{sub e} and the structure of the interphase boundaries at various T are studied. At T near T{sub e}, the initial phase (austenite) is found to wet the boundaries between the forming phases (ferrite, cementite), which results in a sharp increase in the interphase boundary thickness and a decrease in the junction angle between the phases at the colony front. The differences in the diffusion mobilities of interstitial (carbon) atoms in different phases are shown to be important to adequately describe the colony growth kinetics.

36 MATERIALS SCIENCE↗

Combustion-aided suspension plasma spraying of Y{sub 2}O{sub 3} nanoparticles: Synthesis and modeling

Combustion-aided suspension plasma spraying (SPS) was developed for the synthesis of Y{sub 2}O{sub 3} nanoparticles. Numerical models for Ar, Ar/O{sub 2}, and combustion-aided plasma fields were built using FLUENT V6.3.2(c) to compare their different plasma thermophysical properties. Modeling and experimental results both indicate that the plasma field was substantially altered by combustion-aided SPS. The plasma exhibited an elevated volume average temperature and reduced velocity as well as a broadened plasma plume, which resulted in an enhanced vapor supersaturation degree and a faster quenching rate in the radial direction. These can be attributed to the dual effects of oxygen dissociation/recombination and acetone solvent combustion. Consequently, productivity of the obtained nanoparticles increased remarkably and the particles' morphology was improved, with a smaller mean particle size and a narrower size distribution in comparison with those of powder feeding spraying. Furthermore, plasma-induced cubic{yields}monoclinic phase transformation in the as-sprayed Y{sub 2}O{sub 3} particles was restrained by combustion-aided SPS to some extent.

36 MATERIALS SCIENCE↗

The structural and magnetic properties of Mn{sub 2-x}Fe{sub x}NiGa Heusler alloys

The effect of Fe substitution on the phase transformation and magnetic properties of Mn{sub 2}NiGa has been studied. A single bcc phase was obtained in Mn{sub 2-x}Fe{sub x}NiGa (x=0-0.6). With the substitution of Fe for Mn, the lattice constant decreases gradually. The martensitic transformation can be observed when x=0-0.3. Both the martensitic transformation and austenitic transformation temperatures decrease monotonically with increasing Fe content, which is different from common electron concentration dependence in Ni-Mn-Ga system. The saturation magnetizations M{sub s} of Mn{sub 2-x}Fe{sub x}NiGa in both austenitic and martensitic phases increase obviously with the doping of Fe, while the variation of T{sub C} shows an opposite tendency. Theoretical calculations indicate that both austenitic and martensitic phases are ferrimagnets. The Fe moment varies from positive to negative after the tetragonal distortion, which leads to the decrease of the saturation magnetization.

36 MATERIALS SCIENCE↗

Microstructural Insights into Performance Loss of High-Voltage Spinel Cathodes for Lithium-ion Batteries

Spinel-structured LiNi x Mn 2-x O 4 (LNMO), with low-cost earth-abundant constituents, is a promising high-voltage cathode material for lithium-ion batteries. Even though extensive electrochemical investigations have been conducted on these materials, few studies have explored correlations between their loss in performance and associated changes in microstructure. Here, down to the atomic scale, the structural evolution of these materials is investigated upon the progressive cycling of lithium-ion cells. Transgranular cracking is revealed to be a key feature during cycling; this cracking is initiated at the particle surface and leads to the penetration of electrolytes along the crack path, thereby increasing particle exposure to the electrolyte. The lattice structure on the crack surface shows spatial variances, featuring a top layer of rock-salt, a sublayer of a Mn 3 O 4 -like arrangement, and then a mixed-cation region adjacent to the bulk lattice. The transgranular cracking, along with the emergence of local lattice distortion, becomes more evident with extended cycling. Further, phase transformation at primary particle surfaces and void formation through vacancy condensation is found in the cycled samples. All these features collectively contribute to the performance degradation of the battery cells during electrochemical cycling.

25 ENERGY STORAGE↗

Mechanical and Frictional Performance of Ta and Ta-Ag Alloy Films Deposited at Different Sputtering Powers

The mechanical and tribological properties of tantalum and its alloy films are greatly influenced by their phase transformation. In this study, Ta and Ta-Ag films were prepared on carbon steel substrate by DC magnetron sputtering with various sputtering powers. The amorphous and nanocrystalline Ta and Ta-Ag film were produced at different sputtering powers from 40 to 110 W. The frictional properties of Ta and Ta-Ag films were investigated by rubbing against Si{sub 3}N{sub 4} ball from RT to 700 °C. The nanocrystalline Ta-Ag films shows higher hardness values (12 GPa) compared with amorphous phase. The nanocrystalline Ta90-Ag8 film shows a low friction coefficient of about 0.20-0.30 when rubbing against Si{sub 3}N{sub 4} ball at 700 °C. The segregation of Ag can effectively reduce friction coefficients of Ta-Ag film at 700 °C. The Ta-Ag films show high structure stability even after friction at 700 °C.

36 MATERIALS SCIENCE↗

Temperature dependence of the electrical properties of hydrogen titanate nanotubes

The temperature dependence of the electrical properties of hydrogen-rich titanate nanotubes (H-TNTs) in the 90–270 °C range was investigated by impedance spectroscopy. Three types of dominant conduction were found which depend on the previous thermal treatment of the samples. For untreated samples, at low temperatures (T < 100 °C), electrical conductivity is relatively high (>10{sup −4} S/cm at T ≈ 90 °C) and is dominated by protonic transport within structural water molecules. For thermal annealing in inert atmosphere up to 150 °C, water molecules are released from the nanotube structure resulting in a dehydrated H{sub 2}Ti{sub 3}O{sub 7} phase. Such phase has a low, thermally-dependent, electrical conductivity (10{sup −8} S/cm at T ≈ 90 °C) with activation energy of 0.68 eV. For samples annealed up to 260 °C, loss of OH groups, and consequent generation of oxygen vacancies, occurs that result in the non-stoichiometric H{sub 2(1−z)}Ti{sub 3}O{sub 7−z} phase. This phase has much higher conductivity (10{sup −5} S/cm at T ≈ 90 °C) and lower associated activation energy (0.40 eV). The generation of oxygen vacancies is confirmed by electron paramagnetic resonance measurements at room temperature, which revealed the presence of single-electron-trapped oxygen vacancies. The activation energy value found is consistent with the thermal ionization energy of the oxygen vacancies. Such defect formation represents the initial stage of the phase transformation from titanate to TiO{sub 2} (B). X-ray diffraction and Raman spectroscopy measurements also support such interpretation.

36 MATERIALS SCIENCE↗

Origin of enhanced performance when Mn-rich rocksalt cathodes transform to δ -DRX

Most Mn-rich cathodes are known to undergo phase transformation into structures resembling spinel-like ordering upon electrochemical cycling. Recently, the irreversible transformation of Ti-containing Mn-rich disordered rock-salt cathodes into a phase — named δ — with nanoscale spinel-like domains has been shown to increase energy density, capacity retention, and rate capability. However, the nature of the boundaries between domains and their relationship with composition and electrochemistry are not well understood. In this work, we discuss how the transformation into the multi-domain structure results in eight variants of Spinel domains, which is crucial for explaining the nanoscale domain formation in the δ -phase. We study the energetics of crystallographically unique boundaries and the possibility of Li-percolation across them with a fine-tuned CHGNet machine learning interatomic potential. Energetics of 16 d vacancies reveal a strong affinity to segregate to the boundaries, thereby opening Li-pathways at the boundary to enhance long-range Li-percolation in the δ structure. Defect calculations of the relatively low-mobility Ti show how it can influence the extent of Spinel ordering, domain morphology and size significantly; leading to guidelines for engineering electrochemical performance through changes in composition.

Anand, Shashwat↗

Local Crystal Structural Modifications in Pulsed Laser Deposited High-k Dielectric Thin Films on Silicon and Germanium

The thin film growth conditions are correlated with the local structures formed in HfxZr1-xO2 (x=0.0-1.0) high-k dielectric thin films on Si and Ge substrates during deposition. Pulsed laser deposition (PLD) technique has been used in the synthesis of the thin films with systematic variations of substrate temperature, Zr content of the targets and substrate selection. The local structural information acquired from extended X-ray absorption spectroscopy (EXAFS) is correlated with the thin film growth conditions. The response of the local structure around Hf and Zr atoms to growth parameters was investigated by EXAFS experiments performed at the National Synchrotron Light Source of Brookhaven National Laboratory. The competing crystal phases of oxides of Hf were identified and the intricate relation between the stabilized phase and the parameters as: the substrate temperature; Hf to Zr ratio; have been revealed. Specifically, HfO2 thin films on Si(1 0 0) exhibit a tetragonal to monoclinic phase transformation upon increase in the substrate temperature during deposition whereas, HfO2 PLD films on Ge(1 0 0) substrates remain in tetragonal symmetry regardless of the substrate temperature.

36 MATERIALS SCIENCE↗

Effect of photon irradiation on structure of yttria-doped zirconia thin films grown on semiconductor substrates

Structural changes and atomic-scale interfacial phenomena induced by room temperature ultraviolet (UV) irradiation on yttria-doped zirconia (YDZ) thin films grown on semiconductor substrates have been investigated in detail. Interfacial layer formation, film densification, and changes in crystallinity were observed in films grown on Si, while there was minimal difference in films grown on Ge. No significant grain growth and phase transformation were observed, suggesting that cation related kinetics remains unperturbed under UV exposure. The formation of interfacial layers thicker than room temperature self-limiting thickness suggests that effective local field for oxygen vacancies inside the YDZ film was affected by photon illumination.

36 MATERIALS SCIENCE↗

Stability of the hcp Ruthenium at high pressures from first principles

The method of calculation of the elastic constants up to third order from the energy-strain relation under pressure for the hcp crystals is given and described in details. The method is applied to the hcp phase of Ruthenium. Elastic constants, lattice dynamics, and electronic structure are investigated in the pressure interval of 0–600 GPa by means of first principles calculations. The obtained parameters are in very good agreement with available experimental and theoretical data. No preconditions for phase transformation driven by mechanical or dynamical instabilities for hcp Ru were found in the investigated pressure range. The reason of stability at such high pressures is explained in the context of electronic structure peculiarities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Pressure Structural Behavior and Synthesis of Zr2SC

A high pressure study of Zr2SC using synchrotron x-ray diffraction and a Mao-Bell type diamond anvil cell has been performed up to a pressure of 46 GPa at room temperature. No phase transformation has been observed up to this pressure. It is found that the compression along the two axes is almost identical up to 15 GPa, thereafter the c-axis shows a slightly higher compressibility. The third order Birch-Murnaghan equation of state was used to fit the experimental pressure-volume data, from which the isothermal bulk modulus was obtained as KT = 186(4) GPa with a pressure derivative K'T = 4.0. The sample was synthesized using the piston cylinder technique and was found to be predominantly single phase after it was characterized by scanning electron microscopy equipped with an energy dispersive spectrometer and by synchrotron x-ray diffraction. The lattice parameters calculated from the x-ray diffraction were a0 = 3.406(2) and c0 = 12.138(4).

43 PARTICLE ACCELERATORS↗