Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

Validation of cloud forcing simulated by the National Center for Atmospheric Research Community Climate Model using observations from the Earth Radiation Budget Experiment

Satellite measurements of the effect of clouds on the top of atmosphere radiative energy budget are used to validate model simulations from the National Center for Atmospheric Research Community Climate Model (NCAR CCM). The ability of the NCAR CCM to reproduce the monthly mean global distribution and temporal variability on both daily and seasonal time scales is assessed. The comparison reveals several deficiencies in the CCM cloud representation. Most notable are the difficulties in properly simulating the effect of clouds on the planetary albedo. This problem arises from discrepancies in the model's portrayal of low-level cloudiness and leads to significant errors in the absorbed solar radiation simulated by the model. The CCM performs much better in simulating the effect of clouds on the longwave radiation emitted to space, indicating its relative success in capturing the vertical distribution of cloudiness. The daily variability of the radiative effects of clouds in both the shortwave and longwave spectral regions is systematically overestimated. Analysis of the seasonal variations illustrates a distinct lack of coupling in the seasonal changes in the radiative effects of cloudiness between the tropics and mid-latitudes and between the Northern and Southern Hemisphere. Much of this problem also arises from difficulties in simulating low-level cloudiness, placing further emphasis on the need for better model parameterizations of boundary layer clouds.

Soden, B. J.↗

The response of the SSM/I to the marine environment. I - An analytic model for the atmospheric component of observed brightness temperatures

A detailed parameterization is developed for the contribution of the nonprecipitating atmosphere to the microwave brightness temperatures observed by the Special Sensor Microwave/Imager (SSM/I). The atmospheric variables considered include the viewing angle, the integrated water vapor amount and scale height, the effective tropospheric lapse rate and near-surface temperature, the total cloud liquid water, the effective cloud height, and the surface pressure. The dependence of the radiative variables on meteorological variables is determined for each of the SSM/I frequencies 19.35, 22.235, 37.0, and 85.5 GHz, based on the values computed from 16,893 maritime temperature and humidity profiles representing all latitude belts and all seasons. A comparison of the predicted brightness temperatures with brightness temperatures obtained by direct numerical integration of the radiative transfer equation for the radiosonde-profile dataset yielded rms differences well below 1 K for all four SSM/I frequencies.

Petty, Grant W.↗

Pycnonuclear reaction rates for binary ionic mixtures

Through a combination of compositional scaling arguments and examinations of Monte Carlo simulation results for the interparticle separations in binary-ionic mixture (BIM) solids, we have derived parameterized expressions for the BIM pycnonuclear rates as generalizations of those in one-component solids obtained previously by Salpeter and Van Horn and by Ogata et al. We have thereby discovered a catalyzing effect of the heavier elements, which enhances the rates of reactions among the lighter elements when the charge ratio exceeds a critical value of approximately 2.3.

Ichimaru, S.↗

Aerodynamic optimization of an HSCT configuration using variable-complexity modeling

An approach to aerodynamic configuration optimization is presented for the high-speed civil transport (HSCT). A method to parameterize the wing shape, fuselage shape and nacelle placement is described. Variable-complexity design strategies are used to combine conceptual and preliminary-level design approaches, both to preserve interdisciplinary design influences and to reduce computational expense. Conceptual-design-level (approximate) methods are used to estimate aircraft weight, supersonic wave drag and drag due to lift, and landing angle of attack. The drag due to lift, wave drag and landing angle of attack are also evaluated using more detailed, preliminary-design-level techniques. New, approximate methods for estimating supersonic wave drag and drag due to lift are described. The methodology is applied to the minimization of the gross weight of an HSCT that flies at Mach 2.4 with a range of 5500 n.mi. Results are presented for wing planform shape optimization and for combined wing and fuselage optimization with nacelle placement. Case studies include both all-metal wings and advanced composite wings.

Hutchison, M. G.↗

On the correlated k-distribution method for radiative transfer in nonhomogeneous atmospheres

The paper discusses the correlated k(absorption coefficient)-distribution (CKD) method for radiative transfer in nonhomogeneous atmospheres, in terms of the physical and mathematical conditions under which this method is valid. The CKD approach is theoretically formulated, and the mathematical and physical conditions under which this method is valid are identified. The parameterization for incorporating pressure and temperature effects in the k distribution is presented. The errors of CKD for absorption bands in the solar and thermal infrared spectra are examined, and the errors due to both the CKD method and the use of the optimum number of quadrature points are identified. Finally, an overall treatment for various absorption bands is developed, which will provide high efficiency and accuracy.

Fu, Qiang↗

Improving the efficiency of aerodynamic shape optimization procedures

The computational efficiency of an aerodynamic shape optimization procedure which is based on discrete sensitivity analysis is increased through the implementation of two improvements. The first improvement involves replacing a grid point-based approach for surface representation with a Bezier-Bernstein polynomial parameterization of the surface. Explicit analytical expressions for the grid sensitivity terms are developed for both approaches. The second improvement proposes the use of Newton's method in lieu of an alternating direction implicit (ADI) methodology to calculate the highly converged flow solutions which are required to compute the sensitivity coefficients. The modified design procedure is demonstrated by optimizing the shape of an internal-external nozzle configuration. A substantial factor of 8 decrease in computational time for the optimization process was achieved by implementing both of the design improvements.

Burgreen, Greg W.↗

Design sensitivity analysis and optimization tool (DSO) for sizing design applications

The DSO tool, a structural design software system that provides the designer with a graphics-based menu-driven design environment to perform easy design optimization for general applications, is presented. Three design stages, preprocessing, design sensitivity analysis, and postprocessing, are implemented in the DSO to allow the designer to carry out the design process systematically. A framework, including data base, user interface, foundation class, and remote module, has been designed and implemented to facilitate software development for the DSO. A number of dedicated commercial software/packages have been integrated in the DSO to support the design procedures. Instead of parameterizing an FEM, design parameters are defined on a geometric model associated with physical quantities, and the continuum design sensitivity analysis theory is implemented to compute design sensitivity coefficients using postprocessing data from the analysis codes. A tracked vehicle road wheel is given as a sizing design application to demonstrate the DSO's easy and convenient design optimization process.

Chang, Kuang-Hua↗

Budget analysis of the boundary layer grid flights during FIFE 1987

An aircraft grid pattern was flown by the Canadian Twin Otter to map the low-level fluxes and structure over the First International Satellite Land Surface Climatology Project (ISLSCP) Field Experiment (FIFE) research area in 1987. The time dependence and horizontal advection of heat and moisture were extracted from these flights, combined with surface flux measurements and boundary layer top measurements from radiosondes, to analyze the boundary layer budget using a mixed layer model. The results confirm the suggestion of an earlier study that the boundary layer top entrainment (when parameterized using the buoyancy flux) is nearly double the value used by many modeling studies. Both surface and aircraft data have been revised, and it now appears that the direct measurements of the sensible and latent heat fluxes by the aircraft underestimated these fluxes by about 20 percent, because of filtering and undersampling of long wavelength contributions.

Betts, A. K.↗

Solar O I 1304-A triplet line profiles

Estimates were made of the full-disk line profiles of the solar O I resonant triplet at 1304 A, using data from the SMM and the Orbiting Solar Observatory 8 for the time period 1975-1985. The observed line profiles are parameterized using a nonlinear least squares fit of the data by a simple empirical representation of the general line shape. The derived full-disk line shape parameters may be used, in combination with an appropriate value for the line-integrated full-disk solar flux, in the analysis of planetary or cometary O I 1304-A observations under any solar conditions.

Gladstone, G. R.↗

Solar activity and oscillation frequency splittings

Solar p-mode frequency splittings, parameterized by the coefficients through order N = 12 of a Legendre polynomial expansion of the mode frequencies as a function of m/L, were obtained from an analysis of helioseismology data taken at Big Bear Solar Observatory during the 4 years 1986 and 1988-1990 (approximately solar minimum to maximum). Inversion of the even-index splitting coefficients confirms that there is a significant contribution to the frequency splittings originating near the solar poles. The strength of the polar contribution is anti correlated with the overall level or solar activity in the active latitudes, suggesting a relation to polar faculae. From an analysis of the odd-index splitting coefficients we infer an uppor limit to changes in the solar equatorial near-surface rotatinal velocity of less than 1.9 m/s (3 sigma limit) between solar minimum and maximum.

Woodard, M. F.↗

A microcomputer program for estimating low altitude wind and turbulence fields

Past efforts to develop methods for objective wind analysis and to provide turbulence estimates to pilots are reviewed. The present approach involves a wind module and a turbulence module. The wind module extends the critical dividing streamline concept and past developments in mass-conserving wind interpolation schemes. The turbulence module is based on recent efforts to develop practical atmospheric turbulence parameterization schemes based on lapse rate, wind shear, surface heating, and surface roughness. The lapse rate and wind shear are readily obtained from the wind module. Surface roughness and heating come from land use information and net radiation estimates derived from cloud cover, terrain slope, local time, and latitude. This system is argued to have considerable potential for providing useful online information for many kinds of aircraft operations.

Ludwig, F. L.↗

Mixed H2/H(infinity)-Control with an output-feedback compensator using parameter optimization

Among the many possible norm-based optimization methods, the concept of H-infinity optimal control has gained enormous attention in the past few years. Here the H-infinity framework, based on the Small Gain Theorem and the Youla Parameterization, effectively treats system uncertainties in the control law synthesis. A design approach involving a mixed H(sub 2)/H-infinity norm strives to combine the advantages of both methods. This advantage motivates researchers toward finding solutions to the mixed H(sub 2)/H-infinity control problem. The approach developed in this research is based on a finite time cost functional that depicts an H-infinity bound control problem in a H(sub 2)-optimization setting. The goal is to define a time-domain cost function that optimizes the H(sub 2)-norm of a system with an H-infinity-constraint function.

Schoemig, Ewald↗

Newton algorithm for fitting transfer functions to frequency response measurements

In this paper the problem of synthesizing transfer functions from frequency response measurements is considered. Given a complex vector representing the measured frequency response of a physical system, a transfer function of specified order is determined that minimizes the sum of the magnitude-squared of the frequency response errors. This nonlinear least squares minimization problem is solved by an iterative global descent algorithm of the Newton type that converges quadratically near the minimum. The unknown transfer function is expressed as a sum of second-order rational polynomials, a parameterization that facilitates a numerically robust computer implementation. The algorithm is developed for single-input, single-output, causal, stable transfer functions. Two numerical examples demonstrate the effectiveness of the algorithm.

Spanos, J. T.↗

Arctic sea ice albedo - A comparison of two satellite-derived data sets

Spatial patterns of mean monthly surface albedo for May, June, and July, derived from DMSP Operational Line Scan (OLS) satellite imagery are compared with surface albedos derived from the International Satellite Cloud Climatology Program (ISCCP) monthly data set. Spatial patterns obtained by the two techniques are in general agreement, especially for June and July. Nevertheless, systematic differences in albedo of 0.05 - 0.10 are noted which are most likely related to uncertainties in the simple parameterizations used in the DMSP analyses, problems in the ISCCP cloud-clearing algorithm and other modeling simplifications. However, with respect to the eventual goal of developing a reliable automated retrieval algorithm for compiling a long-term albedo data base, these initial comparisons are very encouraging.

Schweiger, Axel J.↗

Mars Global Reference Atmospheric Model (Mars-GRAM): Release No. 2 - Overview and applications

The Mars Global Reference Atmospheric Model (Mars-GRAM), a science and engineering model for empirically parameterizing the temperature, pressure, density, and wind structure of the Martian atmosphere, is described with particular attention to the model's newest version, Mars-GRAM, Release No. 2 and to the improvements incorporated into the Release No. 2 model as compared with the Release No. 1 version. These improvements include (1) an addition of a new capability to simulate local-scale Martian dust storms and the growth and decay of these storms; (2) an addition of the Zurek and Haberle (1988) wave perturbation model, for simulating tidal perturbation effects; and (3) a new modular version of Mars-GRAM, for incorporation as a subroutine into other codes.

James, B.↗

Origin and thermal evolution of Mars

The thermal evolution of Mars is governed by subsolidus mantle convection beneath a thick lithosphere. Models of the interior evolution are developed by parameterizing mantle convective heat transport in terms of mantle viscosity, the superadiabatic temperature rise across the mantle, and mantle heat production. Geological, geophysical, and geochemical observations of the composition and structure of the interior and of the timing of major events in Martian evolution are used to constrain the model computations. Such evolutionary events include global differentiation, atmospheric outgassing, and the formation of the hemispherical dichotomy and Tharsis. Numerical calculations of fully three-dimensional, spherical convection in a shell the size of the Martian mantle are performed to explore plausible patterns of Martian mantel convection and to relate convective features, such as plumes, to surface features, such as Tharsis. The results from the model calculations are presented.

Schubert, G.↗

Scientific investigations planned for the Lidar in-Space Technology Experiment (LITE)

The Lidar In-Space Technology Experiment (LITE) is being developed by NASA/Langley Research Center for a series of flights on the space shuttle beginning in 1994. Employing a three-wavelength Nd:YAG laser and a 1-m-diameter telescope, the system is a test-bed for the development of technology required for future operational spaceborne lidars. The system has been designed to observe clouds, tropospheric and stratospheric aerosols, characteristics of the planetary boundary layer, and stratospheric density and temperature perturbations with much greater resolution than is available from current orbiting sensors. In addition to providing unique datasets on these phenomena, the data obtained will be useful in improving retrieval algorithms currently in use. Observations of clouds and the planetary boundary layer will aid in the development of global climate model (GCM) parameterizations. This article briefly describes the LITE program and discusses the types of scientific investigations planned for the first flight.

Mccormick, M. P.↗

Visualization of redundancy resolution for kinematically redundant robots through the Jacobian null space

We present a unified formulation for the inverse kinematics of redundant arms, based on a special formulation of the null space of the Jacobian. By extending (appropriately re-scaling) previously used null space parameterizations, we obtain, in a unified fashion, the manipulability measure, the null space projector, and particular solutions for the joint velocities. We obtain the minimum norm pseudo-inverse solution as a projection from any particular solution, and the method provides an intuitive visualization of the self-motion. The result is a computationally efficient, consistent approach to computing redundant robot inverse kinematics.

Chen, Yu-Che↗