Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nonlinear modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

A computational model-based validation of Guyton's analysis of cardiac output and venous return curves

Guyton developed a popular approach for understanding the factors responsible for cardiac output (CO) regulation in which 1) the heart-lung unit and systemic circulation are independently characterized via CO and venous return (VR) curves, and 2) average CO and right atrial pressure (RAP) of the intact circulation are predicted by graphically intersecting the curves. However, this approach is virtually impossible to verify experimentally. We theoretically evaluated the approach with respect to a nonlinear, computational model of the pulsatile heart and circulation. We developed two sets of open circulation models to generate CO and VR curves, differing by the manner in which average RAP was varied. One set applied constant RAPs, while the other set applied pulsatile RAPs. Accurate prediction of intact, average CO and RAP was achieved only by intersecting the CO and VR curves generated with pulsatile RAPs because of the pulsatility and nonlinearity (e.g., systemic venous collapse) of the intact model. The CO and VR curves generated with pulsatile RAPs were also practically independent. This theoretical study therefore supports the validity of Guyton's graphical analysis.

NASA Discipline Cardiopulmonary↗

Reduced Electron Models for Edge Simulation

In this paper, we consider the treatment of electrons in kinetic simulations of edge plasmas. A fully kinetic treatment of electrons is expensive because of the short timescales associated with rapid streaming along field lines. Hence we survey a number of reduced options, of varying complexity, with particular attention to the “adiabatic model” commonly used for core plasmas. We note that the adiabatic model is the linear limit of a Boltzmann model, whose nonlinear form is more appropriate for the large potential variations in edge plasmas, and then consider extensions to the Boltzmann model which render it applicable to a plasma which includes end-loss in the scrape-off layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear Dynamic Characteristics and Control of Giant Magnetostrictive Ultrasonic Transducer

The nonlinear dynamic characteristics of giant magnetostrictive ultrasonic transducer (GMUT) are researched in this paper, and the optimal control strategy is proposed. New nonlinear differential terms are introduced to explain the hysteretic phenomena of giant magnetostrictive materials (GMM), and the nonlinear dynamic model of a giant magnetostrictive ultrasonic transducer subjected to harmonic magnetic field and stochastic disturbance is developed. The system’s nonlinear dynamic responses are discussed, and the optimal control strategy is proposed to improve the system’s accuracy. Numerical simulation and experiment results show that there are abundant nonlinear dynamic behaviors in the system; the stability of the system varies with the parameters, which causes stochastic bifurcation; the system’s accuracy is improved through stochastic optimal control. The results of this study are helpful for the application of giant magnetostrictive ultrasonic transducer in engineering fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Weakly nonlinear incompressible Rayleigh-Taylor instability growth at cylindrically convergent interfaces

A weakly nonlinear (WN) model has been developed for the incompressible Rayleigh-Taylor instability (RTI) in cylindrical geometry. The transition from linear to nonlinear growth is analytically investigated via a third-order solutions for the cylindrical RTI initiated by a single-mode velocity perturbation. The third-order solutions can depict the early stage of the interface asymmetry due to the bubble-spike formation, as well as the saturation of the linear (exponential) growth of the fundamental mode. The WN results in planar RTI [Wang et al., Phys. Plasmas 19, 112706 (2012)] are recovered in the limit of high-mode number perturbations. The difference between the WN growth of the RTI in cylindrical geometry and in planar geometry is discussed. It is found that the interface of the inward (outward) development spike/bubble is extruded (stretched) by the additional inertial force in cylindrical geometry compared with that in planar geometry. For interfaces with small density ratios, the inward growth bubble can grow fast than the outward growth spike in cylindrical RTI. Moreover, a reduced formula is proposed to describe the WN growth of the RTI in cylindrical geometry with an acceptable precision, especially for small-amplitude perturbations. Using the reduced formula, the nonlinear saturation amplitude of the fundamental mode and the phases of the Fourier harmonics are studied. Thus, it should be included in applications where converging geometry effects play an important role, such as the supernova explosions and inertial confinement fusion implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Alfven solitary waves in nonrelativistic, relativistic, and ultra-relativistic degenerate quantum plasma

Nonlinear circularly polarized Alfvén waves are studied in magnetized nonrelativistic, relativistic, and ultrarelativistic degenerate Fermi plasmas. Using the quantum hydrodynamic model, Zakharov equations are derived and the Sagdeev potential approach is used to investigate the properties of the electromagnetic solitary structures. It is seen that the amplitude increases with the increase of electron density in the relativistic and ultrarelativistic cases but decreases in the nonrelativistic case. Both right and left handed waves are considered, and it is seen that supersonic, subsonic, and super- and sub-Alfvénic solitary structures are obtained for different polarizations and under different relativistic regimes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamic Influence of Spindle Wobble in a Lathe on the Workpiece Geometry

The influence of spindle wobble in a lathe on the geometry of the machined surface is not direct. The intermediate stages involve conversion of the wobble to forces and elastic deformations. Together with the elastic deformation, wobble modifies the shaping trajectories, which are mainly responsible for the geometry of the final product. Wobble induces periodic variation in the parameters of the dynamic system. It leads not only to parametric self-excitation but also, in a nonlinear dynamic system, to the formation of various attractive deformational-displacement sets. The present work is devoted to mathematical modeling of the influence of wobble on the workpiece geometry. Cases in which various types of attractive sets are formed in the system (such as limit cycles, invariant tori, and chaotic attractors) are considered.

42 ENGINEERING↗

An investigation of adaptive controllers for helicopter vibration and the development of a new dual controller

An investigation of the properties important for the design of stochastic adaptive controllers for the higher harmonic control of helicopter vibration is presented. Three different model types are considered for the transfer relationship between the helicopter higher harmonic control input and the vibration output: (1) nonlinear; (2) linear with slow time varying coefficients; and (3) linear with constant coefficients. The stochastic controller formulations and solutions are presented for a dual, cautious, and deterministic controller for both linear and nonlinear transfer models. Extensive simulations are performed with the various models and controllers. It is shown that the cautious adaptive controller can sometimes result in unacceptable vibration control. A new second order dual controller is developed which is shown to modify the cautious adaptive controller by adding numerator and denominator correction terms to the cautious control algorithm. The new dual controller is simulated on a simple single-control vibration example and is found to achieve excellent vibration reduction and significantly improves upon the cautious controller.

Mookerjee, P.↗

Application of Interface Technology in Nonlinear Analysis of a Stitched/RFI Composite Wing Stub Box

A recently developed interface technology was successfully employed in the geometrically nonlinear analysis of a full-scale stitched/RFI composite wing box loaded in bending. The technology allows mismatched finite element models to be joined in a variationally consistent manner and reduces the modeling complexity by eliminating transition meshing. In the analysis, local finite element models of nonlinearly deformed wide bays of the wing box are refined without the need for transition meshing to the surrounding coarse mesh. The COMET-AR finite element code, which has the interface technology capability, was used to perform the analyses. The COMET-AR analysis is compared to both a NASTRAN analysis and to experimental data. The interface technology solution is shown to be in good agreement with both. The viability of interface technology for coupled global/local analysis of large scale aircraft structures is demonstrated.

Wang, John T.↗

Traveling wave solutions in a chain of periodically forced coupled nonlinear oscillators

Artificial perceptions of light called phosphenes were motivated by earlier studies. We analyze traveling wave solutions in a chain of periodically forced coupled nonlinear oscillators modeling this phenomenon. We examine the discrete model problem in its co-traveling frame and systematically obtain the corresponding traveling waves in one spatial dimension. Direct numerical simulations as well as linear stability analysis are employed to reveal the parameter regions where the traveling waves are stable, and these waves are, in turn, connected to the standing waves analyzed in earlier work. We also consider a two-dimensional extension of the model and demonstrate the robust evolution and stability of planar fronts. Moreover, our simulations also suggest the radial fronts tend to either annihilate or expand and flatten out, depending on the phase value inside and the parameter regime. Finally, we observe that solutions that initially feature two symmetric fronts with bulged centers evolve in qualitative agreement with experimental observations of phosphenes.

59 BASIC BIOLOGICAL SCIENCES↗

Normal-mode splitting and antibunching in Stokes and anti-Stokes processes in cavity optomechanics: Radiation-pressure-induced four-wave-mixing cavity optomechanics

We study Stokes and anti-Stokes processes in cavity optomechanics in the regime of strong coupling. The Stokes and anti-Stokes signals exhibit prominently the normal-mode splitting. We report gain for the Stokes signal. We also report lifetime splitting when the pump power is less than the critical power for normal-mode splitting. The nonlinear Stokes processes provide a useful method for studying the strong-coupling regime of cavity optomechanics. We also investigate the correlations between the Stokes and the anti-Stokes photons produced spontaneously by the optomechanical system. At zero temperature, our nanomechanical system leads to the correlations between the spontaneously generated photons exhibiting photon antibunching and those violating the Cauchy-Schwartz inequality.

74 ATOMIC AND MOLECULAR PHYSICS↗

STRUCTURE AND STABILITY OF MAGNETIC FIELDS IN SOLAR ACTIVE REGION 12192 BASED ON NONLINEAR FORCE-FREE FIELD MODELING

We analyze a three-dimensional (3D) magnetic structure and its stability in large solar active region (AR) 12192, using the 3D coronal magnetic field constructed under a nonlinear force-free field (NLFFF) approximation. In particular, we focus on the magnetic structure that produced an X3.1-class flare, which is one of the X-class flares observed in AR 12192. According to our analysis, the AR contains a multiple-flux-tube system, e.g., a large flux tube, with footpoints that are anchored to the large bipole field, under which other tubes exist close to a polarity inversion line (PIL). These various flux tubes of different sizes and shapes coexist there. In particular, the latter are embedded along the PIL, which produces a favorable shape for the tether-cutting reconnection and is related to the X-class solar flare. We further found that most of magnetic twists are not released even after the flare, which is consistent with the fact that no observational evidence for major eruptions was found. On the other hand, the upper part of the flux tube is beyond a critical decay index, essential for the excitation of torus instability before the flare, even though no coronal mass ejections were observed. We discuss the stability of the complicated flux tube system and suggest the reason for the existence of the stable flux tube. In addition, we further point out a possibility for tracing the shape of flare ribbons, on the basis of a detailed structural analysis of the NLFFF before a flare.

79 ASTRONOMY AND ASTROPHYSICS↗

A nonlinear filtering process diagnostic system for the Space Station

A nonlinear filtering process diagnostic system, terrestrial simulation and real time implementation studies is presented. Possible applications to Space Station subsystem elements are discussed. A process diagnostic system using model based nonlinear filtering for systems with random structure was shown to provide improvements in stability, robustness, and overall performance in comparison to linear filter based systems. A suboptimal version of the nonlinear filter (zero order approximation filter, or ZOA filter) was used in simulation studies, initially, with a pressurized water reactor model and then with water/steam heat exchanger models. Finally, a real time implementation for leak detection in a water/steam heat exchanger was conducted using the ZOA filter and heat exchanger models.

Yoel, Raymond R.↗

Automating Bayesian inference and design to quantify acoustic particle levitation

Self-propulsion of micro- and nanoparticles powered by ultrasound provides an attractive strategy for the remote manipulation of colloidal matter using biocompatible energy inputs. Quantitative understanding of particle motion and its dependence on size, shape, and composition requires accurate characterization of the acoustic field, which depends sensitively on the experimental setup. Here, we show how automated experiments based on Bayesian inference and design can accurately and efficiently characterize the acoustic field within resonant chambers used to propel acoustic nanomotors. Repeated cycles of observation, inference, and design (OID) are guided by a physical model that describes the rate at which levitating particles approach the nodal plane. Using video microscopy, we observe the relaxation of tracer particles to this plane following the application of the acoustic field. We use sequential Monte Carlo methods to infer model parameters such as the amplitude and frequency of the resonant chamber while accounting for particle-level measurement noise and population-level heterogeneity in the field. Guided by simulated outcomes, we select the optimal design for the next experiment as to maximize the information gain in the relevant parameters. We show how this iterative process serves to discriminate between competing hypotheses and efficiently converges to accurate parameter estimates using only few automated experiments. We discuss the need for model criticism to ensure the validity of the guiding model throughout automated cycles of observation, inference, and design. Furthermore, this work demonstrates how Bayesian methods can learn the parameters of nonlinear, hierarchical models used to describe video microscopy data of active colloids.

42 ENGINEERING↗

Enumeration and stability analysis of simple periodic orbits in β-Fermi Pasta Ulam lattice

We study the well-known one-dimensional problem of N particles with a nonlinear interaction. The special case of quadratic and quartic interaction potential among nearest neighbours is the β-Fermi-Pasta-Ulam model. We enumerate and classify the simple periodic orbits for this system and find the stability zones, employing Floquet theory. Such stability analysis is crucial to understand the transition of FPU lattice from recurrences to globally chaotic behavior, energy transport in lower dimensional system, dynamics of optical lattices and also its impact on shape parameter of bio-polymers such as DNA and RNA.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gap solitons and Bloch waves of interacting bosons in one-dimensional optical lattices: From the weak- to the strong-interaction limits

We study the gap solitons and nonlinear Bloch waves of interacting bosons in one-dimensional optical lattices, taking into account the interaction from the weak to the strong limits. It is shown that composition relation between the gap solitons and nonlinear Bloch waves exists for the whole span of the interaction strength. The linear stability analysis indicates that the gap solitons are stable when their energies are near the bottom of the linear Bloch band gap. By increasing the interaction strength, the stable gap solitons can become unstable. It is argued that the stable gap solitons can easily be formed in a weakly interacting system with energies near the bottom of the lower-level linear Bloch band gaps.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sheared wing-tip aerodynamics - Wind-tunnel and computational investigation

Computational and experimental performance benefits are presented for a high-aspect-ratio unswept wing configuration with sheared tips. The sheared tip is a highly swept and highly tapered surface located in the same plane as the inboard wing panel to which it is attached. The compuational results were obtained with an inviscid surface panel method that models the nonlinear influence of the trailing wake. Both wind-tunnel and calculated results were obtained for a 12-ft span wing model with various wing-tip configurations. The computational and experimental data are in fair agreement and demonstrate that sheared wing tips can reduce induced drag at cruise and climb lift coefficients. The drag reduction is the result of wake deformation effects and changes in spanwise load distribution. Wind-tunnel measured longitudinal and lateral directional stability characteristics are also presented for the various wing-tip layouts.

Vijgen, P. M. H. W.↗

Analysis of limit cycles in control systems for joint dominated structures

An approach to the modeling of limit cycles due to joint nonlinearities in large joint dominated space structures is presented which makes it possible to predict limit cycles and determine their stability. An actively controlled truss structure with nonlinear joints is modeled as a linear system with nonlinear feedback by separating the joint load-displacement characteristics into a linear part, which prevails at large displacements, and a nonlinear part. By replacing the joints by their linear parts, it is possible to perform a standard model decomposition which yields a reduced order linear model. Linear control laws can be easily included into the linear part of the system; nonlinear control laws can be implemented but they must be fed back to the linear model. The modeling approach described here allows straightforward limit cycle analysis.

Mercadal, M.↗

Modeling of cluster formation in nonlinear optical lithium niobate crystal

The processes occurring during the formation of energetically equilibrium oxygen-octahedral clusters in the ferroelectric phase of lithium niobate (LiNbO{sub 3}) crystal, have been qualitatively modeled in dependence of the phase composition. The modeling results are compared with the data obtained within vacancy models. It is shown that the cluster structure constructed along the crystallographic Y axis is most ordered, while that constructed along the polar Z axis is least ordered. The largest spread in the ratio R = Li/Nb is observed in the direction of the Z axis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗