SEARCH · Engineering Papers

Results for “nonlinear function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Heteroanionic Control of Exemplary Second-Harmonic Generation and Phase Matchability in 1D LiAsS 2– x Se x

The isostructural heteroanionic compounds β-LiAsS 2–x Se x (x = 0, 0.25, 1, 1.75, 2) show a positive correlation between selenium content and second-harmonic response and greatly outperform the industry standard AgGaSe 2 . These materials crystallize in the noncentrosymmetric space group Cc as one-dimensional $\frac{1}{∞}$ [AsQ 2 ] - (Q = S, Se, S/Se) chains consisting of corner-sharing AsQ3 trigonal pyramids with charge-balancing Li + atoms interspersed between the chains. LiAsS 2–x Se x melts congruently for 0 ≤ x ≤ 1.75, but when the Se content exceeds x = 1.75, crystallization is complicated by a phase transition. This behavior is attributed to the β- to α-phase transition present in LiAsSe 2 , which is observed in the Se-rich compositions. The band gap decreases with increasing Se content, starting at 1.63 eV (LiAsS 2 ) and reaching 1.06 eV (β-LiAsSe 2 ). Second-harmonic generation measurements as a function of wavelength on powder samples of β-LiAsS 2–x Se x show that these materials exhibit significantly higher nonlinearity than AgGaSe 2 (d 36 = 33 pm/V), reaching a maximum of 61.2 pm/V for LiAsS 2 . In comparison, single-crystal measurements for LiAsSSe yielded a d eff = 410 pm/V. LiAsSSe, LiAsS 0.25 Se 1.75 , and β-LiAsSe 2 show phase-matching behavior for incident wavelengths exceeding 3 μm. The laser-induced damage thresholds from two-photon absorption processes are on the same order of magnitude as AgGaSe 2 , with S-rich materials slightly outperforming AgGaSe 2 and Se-rich materials slightly underperforming AgGaSe 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Estimation of the orientation of stress in the Earth’s crust without earthquake or borehole data

Abstract Mechanical stress acting in the Earth’s crust is a fundamental property that is important for a wide range of scientific and engineering applications. The orientation of maximum horizontal compressive stress can be estimated by inverting earthquake source mechanisms and measured directly from borehole-based measurements, but large regions of the continents have few or no observations. Here we present an approach to determine the orientation of maximum horizontal compressive stress by measuring stress-induced anisotropy of nonlinear susceptibility, which is the derivative of elastic modulus with respect to strain. Laboratory and Earth experiments show that nonlinear susceptibility is azimuthally dependent in an anisotropic stress field and is maximum in the orientation of maximum horizontal compressive stress. We observe this behavior in the Earth—in Oklahoma and New Mexico, U.S.A, where maximum nonlinear susceptibility coincides with the orientation of maximum horizontal compressive stress measured using traditional methods. Our measurements use empirical Green’s functions and solid-earth tides and can be applied at different temporal and spatial scales.

58 GEOSCIENCES↗

DOE OSTI2022

Faster network disruption from layered oscillatory dynamics

Nonlinear complex network-coupled systems typically have multiple stable equilibrium states. Following perturbations or due to ambient noise, the system is pushed away from its initial equilibrium, and, depending on the direction and the amplitude of the excursion, it might undergo a transition to another equilibrium. It was recently demonstrated [M. Tyloo, J. Phys. Complex. 3 03LT01 (2022)] that layered complex networks may exhibit amplified fluctuations. Here, I investigate how noise with system-specific correlations impacts the first escape time of nonlinearly coupled oscillators. Interestingly, I show that, not only the strong amplification of the fluctuations is a threat to the good functioning of the network but also the spatial and temporal correlations of the noise along the lowest-lying eigenmodes of the Laplacian matrix. Finally, I analyze first escape times on synthetic networks and compare noise originating from layered dynamics to uncorrelated noise.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

A Data-Driven Approach for High-Impedance Fault Localization in Distribution Systems [SWR-24-13]

This software provides a data-driven approach for efficiently identifying high impedance faults (HIFs) in distribution systems. To tackle the nonlinearity of the voltage current trajectory of HIFs, we first formulate linear least squares problems to approximate the trajectory with piecewise functions. Then we collect the function features of all segments as inputs and use the support vector machine approach to efficiently identify HIFs at different locations.

Zhou, Yuqi↗

DOE OSTI2026

Using Machine Learning to Understand Electric and Hybrid Vehicles Ownership in Burdened and Nonburdened Communities

Transitioning to electric and hybrid vehicles (EHVs) for all communities is a pivotal step toward sustainable transportation and environmental conservation. This paper aims to understand the adoption of EHVs, focusing on burdened communities (BCs) in the United States. The EHV ownership-based analysis combines two datasets—behavioral data from the Puget Sound Regional Travel Survey integrated with BCs (Justice40) data covering transportation insecurity, environmental burden, social vulnerability, health vulnerability, and climate and disaster risk burden. After creating this unique database, descriptive analysis and modeling are used to analyze the data and predict EHV ownership in the future. Specifically, we use a new method that combines particle swarm optimization (PSO) with a stacking model named PSO-Stacking, which incorporates heterogeneous base learners of machine learning and deep learning. PSO applies a customized objective function to select the optimal hyperparameters for heterogeneous learners within the stacking model, effectively addressing challenges such as multicollinearity, data imbalance, nonlinearity, and overfitting. The proposed solution covers more accurate results than standard benchmark models for EHV ownership in BCs and non-BCs. In addition, the results of the PSO-Stacking method are explained using the local interpretable model-agnostic explanations technique. Results show a negative correlation between the BCs indicators, that is, higher transportation insecurity associated with lower EHV ownership. Furthermore, BCs have higher future climate risk scores, diesel particulate matter levels, and PM2.5 in the air than non-BCs because of higher conventional vehicle ownership. These communities are at higher risk and can benefit from electrification, EV infrastructure, and EV policies to address environmental challenges.

Aslam, Zeeshan [ORNL]↗

DOE OSTI2023

Learning Symbolic Expressions: Mixed-Integer Formulations, Cuts, and Heuristics

Here, in this paper, we consider the problem of learning a regression function without assuming its functional form. This problem is referred to as symbolic regression. An expression tree is typically used to represent a solution function, which is determined by assigning operators and operands to the nodes. Cozad and Sahinidis propose a nonconvex mixed-integer nonlinear program (MINLP), in which binary variables are used to assign operators and nonlinear expressions are used to propagate data values through nonlinear operators, such as square, square root, and exponential. We extend this formulation by adding new cuts that improve the solution of this challenging MINLP. We also propose a heuristic that iteratively builds an expression tree by solving a restricted MINLP. We perform computational experiments and compare our approach with a mixed-integer program–based method and a neural network–based method from the literature.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Automatic Calibration of a Geomechanical Model from Sparse Data for Estimating Stress in Deep Geological Formations

Summary In this study, we demonstrate geomechanical modeling with fully automatic parameter calibration to estimate the full geomechanical stress fields of a prospective US carbon dioxide (CO2) storage site, based on sparse measurement data. The goal is to compute full stress tensor field estimates (principal stresses and orientations) that are maximally compatible with observations within the constraints of the model assumptions, thereby extending pointwise, incomplete partial stress measurement to a simulated full formation stress field, as well as a rough assessment of the associated error. We use the Perch site, located in Otsego County, Michigan, USA, as our case study. The input data consist of partial stress tensor information inferred from in-situ borehole tests, geophysical well logs, and processing of seismic data. A static earth model (SEM) of the site was developed, and geomechanical simulation functionality of the open-source MATLAB Reservoir Simulation Toolbox (MRST) was used to model the stress field. Adjoint-based nonlinear optimization was used to adjust boundary conditions and material properties to calibrate simulated results of observations. Results were interpreted through a Bayesian framework. The focus of this paper is to demonstrate how the fully automatic calibration procedure works and discuss the results obtained; it does not attempt a detailed analysis of the stress field in the context of the proposed CO2 storage initiatives. Our work is part of a larger effort to noninvasively determine in-situ stresses in deep formations considered for CO2 storage. Guided by previously published research on geomechanical model calibration, our work presents a novel calibration approach supporting a potentially large number of linear or nonlinear calibration parameters to produce results optimally agreeing with available measurements and thus extend partial pointwise estimates to full tensor fields compatible with the physics of the site.

Engineering↗

DOE OSTI2023

Kinetic characterization of 3D magnetic reconnection: A transformative step (Final Report)

We investigated magnetic reconnection in the Earth’s magnetopause, magnetotail, and the bow shock, by means of fully kinetic simulations and analysis of space data obtained by NASA’s Magnetospheric Multiscale mission. We elucidated signatures of particle energization in particle distribution functions in the vicinity of reconnection X-line, properties of reconnection in shock-driven turbulence, and wave excitations and nonlinear structures. We advanced the understanding of magnetic reconnection from the viewpoint of particle kinetics in the diffusion region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Photoemission Induced Plasma Breakdown (Update)

Laser-induced photoemission of electrons offers opportunities to trigger and control plasmas and discharges. However, the underlying mechanisms are not sufficiently characterized to be fully utilized. Photoemission is highly nonlinear, achieved through multiphoton absorption, above threshold ionization, photo-assisted tunneling, etc., where the dominant process depends on the work function of the material, photon energy and associated fields, surface heating, background fields, etc. To characterize the effects of photoemission on breakdown, breakdown experiments were performed and interpreted using a 0D plasma discharge circuit model and quantum model of photoemission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1976

The Investigation of Optimal Discrete Approximations for Real Time Flight Simulations

The results are presented of an investigation of discrete approximations for real time flight simulation. Major topics discussed include: (1) consideration of the particular problem of approximation of continuous autopilots by digital autopilots; (2) use of Bode plots and synthesis of transfer functions by asymptotic fits in a warped frequency domain; (3) an investigation of the various substitution formulas, including the effects of nonlinearities; (4) use of pade approximation to the solution of the matrix exponential arising from the discrete state equations; and (5) an analytical integration of the state equation using interpolated input.

Parrish, E. A.↗

NASA NTRS1981

Pupillometry, a bioengineering overview

The pupillary control system is examined using a microprocessor based integrative pupillometer. The real time software functions of the microprocessor include: data collection, stimulus generation and area to diameter conversion. Results of an analysis of linear and nonlinear phenomena are presented.

Myers, G.↗

NASA NTRS1983

Constitutive Models Based on Compressible Plastic Flows

The need for describing materials under time or cycle dependent loading conditions has been emphasized in recent years by several investigators. In response to the need, various constitutive models describing the nonlinear behavior of materials under creep, fatigue, or other complex loading conditions were developed. The developed models for describing the fully dense (non-porous) materials were mostly based on uncoupled plasticity theory. The improved characterization of materials provides a better understanding of the structual response under complex loading conditions. The pesent studies demonstrate that the rate or time dependency of the response of a porous aggregate can be incorporated into the nonlinear constitutive behavior of a porous solid by appropriately modeling the incompressible matrix behavior. It is also sown that the yield function which wads determined by a continuum mechanics approach must be verified by appropriate experiments on void containing sintered materials in order to obtain meaningful numbers for the constants that appear in the yield function.

Rajendran, A. M.↗

NASA NTRS1984

Gear mesh stiffness and load sharing in planetary gearing

An interactive computerized analysis was developed for determining load sharing among planetary gears. The load sharing is established as a function of transmitted torque, degree of sun gear fixity, component flexibility, gear tooth quality, and phasing of individual planet gears. A nonlinear variable gear tooth mesh stiffness model was used to simulate the sun/plant and planet/ring gear meshes. The determined load sharing and gear mesh stiffness parameters then can be used for the subsequent assessment of dynamic load factors.

Kasuba, R.↗

NASA NTRS1985

Stable boundary conditions and difference schemes for Navier-Stokes equations

The Navier-Stokes equations can be viewed as an incompletely elliptic perturbation of the Euler equations. By using the entropy function for the Euler equations as a measure of energy for the Navier-Stokes equations, it was possible to obtain nonlinear energy estimates for the mixed initial boundary value problem. These estimates are used to derive boundary conditions which guarantee L2 boundedness even when the Reynolds number tends to infinity. Finally, a new difference scheme for modelling the Navier-Stokes equations in multidimensions for which it is possible to obtain discrete energy estimates exactly analogous to those we obtained for the differential equation was proposed.

Dutt, P.↗

NASA NTRS1986

Optimal control laws for microburst encounter

Simplified structures for longitudinal control laws that reduce an aircraft's response to the strong head-tailwind and downdraft variations associated with microbursts are presented. They are based on non-zero-set-point linear-quadratic regulators that command throttle setting and angle of attack as functions of velocity and flight path angle, and they can incorporate direct measurements of the wind profile if available. Selection of cost functions to be minimized by feedback control has been aided by a prior study of classical control laws and exact nonlinear-optimal flight paths through realistic microburst wind profiles. The resulting optimal control laws have an adaptive, dual-mode structure that can be implemented either in flight-director logic or in an autopilot.

Stengel, R. F.↗

NASA NTRS1987

Analysis of a parallelized nonlinear elliptic boundary value problem solver with application to reacting flows

A parallelized finite difference code based on the Newton method for systems of nonlinear elliptic boundary value problems in two dimensions is analyzed in terms of computational complexity and parallel efficiency. An approximate cost function depending on 15 dimensionless parameters is derived for algorithms based on stripwise and boxwise decompositions of the domain and a one-to-one assignment of the strip or box subdomains to processors. The sensitivity of the cost functions to the parameters is explored in regions of parameter space corresponding to model small-order systems with inexpensive function evaluations and also a coupled system of nineteen equations with very expensive function evaluations. The algorithm was implemented on the Intel Hypercube, and some experimental results for the model problems with stripwise decompositions are presented and compared with the theory. In the context of computational combustion problems, multiprocessors of either message-passing or shared-memory type may be employed with stripwise decompositions to realize speedup of O(n), where n is mesh resolution in one direction, for reasonable n.

Keyes, David E.↗

NASA NTRS1990

Estimating short-period dynamics using an extended Kalman filter

An extended Kalman filter is used to estimate the parameters of a low-order model from aircraft transient response data. The low-order model is a state-space model derived from the short-period approximation of the longitudinal aircraft dynamics. The model corresponds to the pitch rate to stick force transfer function currently used in flying qualities analysis. The parameters are estimated from flight data as well as from a 6-DOF nonlinear simulation of the aircraft. These two estimates are then compared, and the discrepancies noted. The low-order model is able to satisfactorily match both flight data and simulation data from a high-order computer simulation.

Bauer, Jeffrey E.↗

NASA NTRS1992

Using Derivatives Of Higher Order In Sensitivity Analysis

"What if" questions answered exactly, without using "increment-and-reevaluate" approach, and without finite differencing of system analysis, by use of sensitivity analysis to calculate first derivatives of behaviors of coupled systems with respect to design variables. If problem strongly nonlinear, efficiency improved by making derivatives of higher orders available to search algorithms. Extension effected by recursive application of same implicit function theorem that underlies previous method. Useful in design calculations for almost any system, including structures, machines, and distribution networks. Feedback control of processes improved by inclusion of derivative terms of higher order.

Sobieski, Jaroslaw↗